Dummy molecularly imprinted microspheres prepared by Pickering emulsion polymerization for matrix solid-phase dispersion extraction of three azole fungicides from fish samples

Assessment of total mercury in urban particulate matter by filter fiber assisted matrix solid-phase dispersion coupling with microplasma assisted-cold vapor generation

BACKGROUND

The evaluation of particle-bound mercury (PBM) exposure is a crucial aspect of assessing the global cycle of mercury (Hg) and its adverse effects on human health and ecosystems. Nevertheless, the precise and reliable measurement of PBM remains a formidable task because of the costly and cumbersome equipment required, as well as the inadequate sensitivities exhibited by current analytical techniques. In this study, we provided a unique and straightforward approach utilising filter fiber-assisted matrix solid-phase dispersion (FF-MSPD) in conjunction with single-drop solution electrode discharge-induced cold vapor generation atomic fluorescence spectrometry (SD-SEGD-CVG-AFS) for the precise quantification of PBM. The PBM contained in a small filter was efficiently extracted with 200 μL of eluent (0.2 % L-cysteine and 4 % HCOOH) by FF-MSPD and subsequently converted to Hg0 using SD-SEGD-CVG, before being subjected to examination using AFS.

RESULTS

The resulted limit of detection (LOD, 3σ) was 0.17 pg m-3, obtained with a sample volume of 12 m3, which was much higher than that of the techniques published in the literatures. The aforementioned technique was effectively utilised for the detection of mercury in 19 samples of PM2.5 and PM10 which were collected over a span of several months.

SIGNIFFCANCE

Contrast to conventional methods, the proposed method offers a range of distinct advantages, including simplified operation, absence of memory effects, enhanced sensitivity, substantial reduction in reagent usage, and decreased secondary pollution. These advantages are particularly valuable for advancing research on the fate, transport, and exposure routes of environmental mercury.

Application of molecular imprinting technology based on new nanomaterials in adsorption and detection of fluoroquinolones

Irrational use of fluoroquinolones (FQs) can lead to allergic reactions, adverse reactions to the heart and damage of the liver; thus, it is of great significance to establish rapid, sensitive and accurate detection methods for FQs. Molecularly imprinted polymers (MIPs) with specific structures synthesized by molecular imprinting technology (MIT) are widely used for the detection of FQs due to their high specificity, high sensitivity and stable performance. Recently, new functional nanomaterials with different morphologies and sizes, which can provide rich sites for surface chemical reactions, have attracted more and more attention of the researchers. Thus, the application status and development prospects of MIT based on new nanomaterials in the adsorption and detection of FQs were summarized in this study, providing a theoretical basis and technical guarantee for the development of new and efficient food safety analysis strategies based on MIPs.

Dummy-template Pickering emulsion imprinted microspheres online pretreatment and analysis for the estrogens in cosmetics

Estrogens are a class of steroid hormone with strong physiological activity. Due to the pronounced beauty effect, such drugs are highly susceptible to illegal addition and cause other adverse effects. To avoid template leakage and the negative impacts on the environment caused by the estrogens, diosgenin was selected as the dummy template due to its similar skeleton structure. The Pickering emulsion polymerization was used to obtain the dummy-template molecularly imprinted polymers (dt-MIPs). Scanning electron microscopy, optical microscopy, specific surface area testing, Fourier transform infrared spectroscopy and adsorption experiments were used to characterize the apparent morphology and the recognition performance of the microspheres. Then, the prepared microspheres and commercial fillers were used to construct an on-line solid phase extraction (on-line SPE) analytical system coupled with HPLC via a two-position switching valve. On-line solid phase extraction-HPLC analytical methods were established and verified, for the simultaneous determination of four estrogens in cosmetic samples. The accuracy and precision RSDs for the established methods using the imprinted sorbents were 92.00-104.02% and less than 9.12%, respectively. All four estrogens exhibited good linearity in the range of 0.05 to 5 µg/mL with a coefficient of determination R² greater than 0.9810. The method comparison results suggest that the established analytical method is simple in pre-treatment, easy to automate, and has excellent sensitivity to meet the analytical requirements of complex samples.

Three-dimensional acanthosphere-like hierarchical Co@graphitic carbon for dispersive magnetic solid-phase extraction of nitroimidazole

Herein, a magnetic three-dimensional acanthosphere-like hierarchical Co@graphitic carbon (3D Co@GC) is introduced as an efficient adsorbent for extraction of three nitroimidazoles (NMZs: metronidazole (MNZ), ornidazole (ONZ) and tinidazole (TNZ)) from environmental water and food samples. The proposed 3D Co@GC was synthesized by a simple template-free method, which consisted of plentiful freely arranged one-dimensional nanowires. The adsorption properties of 3D Co@GC for three NMZs were investigated systematically by adsorption kinetic and isotherm studies. 3D Co@GC exhibits good adsorption capacity and fast adsorption kinetics toward three NMZs by virtue of its unique hierarchical structure. In addition, it was also found that a bit of methanol can effectively elute the adsorbed NMZs, eliminating the need for other dangerous strong acid or base solutions. Thus, 3D Co@GC as adsorbent to extraction three trace NMZs followed by direct quantification detection of targets with high-performance liquid chromatography with ultraviolet-visible detector (HPLC-UV) was developed. The parameters of dispersed magnetic solid-phase extraction (d-MSPE) were optimized by univariate and multivariate methods (Box-Behnken design). This established method revealed wide linear range and low limits of detection. Furthermore, the satisfactory recoveries of NMZs (86.7-106.7%) were acquired in spiked river water, honey, milk, and muscle samples. This study might provide a potential strategy for the efficient extraction and sensitive analysis of trace NMZs in river water, honey, milk, and muscle samples.

Dummy molecularly imprinted polymers for class-selective extraction of amphetamine-type stimulants from alcoholic and nonalcoholic beverages

Molecularly imprinted polymer was constructed for the first time through dummy imprinting strategy with homopiperonylamine as dummy template. The prepared dummy molecularly imprinted polymer (DMIP) showed high class selectivity towards the most popular amphetamine-type stimulants (ATSs) such as methamphetamine, amphetamine, 3,4-methylenedioxymethamphetamine, 3,4-methylenedioxy-amphetamine, and 3,4-methylenedioxy-N-ethylamphetamine with the imprinting factors of 2.280∼3.698 and selectivity factors of 1.654∼3.698. Moreover, ATSs could be rapidly adsorbed from water with the equilibrium time within 5 min. Hydrogen-bonding interaction between the amino groups of ATSs and carboxy on DMIP could be dominated adsorption mechanism. DMIP was employed as solid phase extraction (SPE) sorbents. Under the optimum extraction conditions, the method using DMIP-based SPE and high performance liquid chromatography-tandem mass spectrometry showed good linearity in the range of 0.025∼1.00 μmol L^-1, good repeatability (RSD 4.8∼8.6%, n = 5) and low limits of quantification (0.007∼0.200 ng mL^-1, S/N = 10). Satisfactory recoveries (72.5∼120%) with low RSD values (<10%) were obtained for all targets viz. spiked coke carbonated drinks, beer and cocktail. Compared with other commercial SPE sorbents, DMIP exhibited lower matrix effect (ME) for coke, beer and cocktail with ME values of 101∼124%, 75.8∼80.2% and 103∼128%, respectively. The obtained results suggested that the developed DMIP materials could be a potential candidate for pretreatment of ATSs in alcoholic and nonalcoholic beverages.

Selective recognition of tetracycline residues in animal derived samples based on molecularly imprinted microspheres from silica-stabilised Pickering emulsion polymerisation

Novel molecularly imprinted polymers for selective binding of tetracyclines were synthesised through oil-in-water Pickering emulsion polymerisation with SiO₂ particles as stabilisers. The products were used for solid phase extraction coupled with high-performance liquid chromatography to detect trace tetracycline and oxytetracycline in animal-derived samples. The SPE materials were characterised in detail by Fourier transform infrared spectrometry, scanning electron microscopy and thermogravimetry analysis. The imprinted polymers displayed high adsorption capacity, fast binding process and high selectivity through evaluation of adsorption performance employing kinetic, static adsorption and selectivity experiments. Under optimum detection conditions, good linearity (12 to 121 µg kg^-1) and limits of detection (1.8 to 1.9 μg kg^-1) for tetracyclines were obtained. In addition, satisfactory recoveries of 75% to 115 % were also achieved by spiking tetracyclines into milk, chicken, fish and pork samples, giving direct evidence of real practicality of our proposed separation method.

Sensitive and selective determination of imidacloprid with magnetic molecularly imprinted polymer by using LC/Q-TOF/MS

In this paper, magnetic-molecularly imprinted polymer was used for the preconcentration of trace levels of imidacloprid in water and apple samples prior to liquid chromatography-quadrupole-time-of-flight mass spectrometric determination. The selectivity of the magnetic polymer was united with the sensitivity and the high resolving power of the chromatographic system. The developed method showed a linear range from 10.0 to 500.0 µg/L. The quantitative recoveries were obtained for water and apple samples in the range of 92.0%–99.0 %. The relative standard deviations of intra-day and inter-day tests were found to be in the range of 0.8%–1.2% and 1.2%–1.6 %, respectively. In addition, the same magnetic-molecularly imprinted polymer (MMIP) can be used at least ten cycles for the determination of imidacloprid. The preconcentration factor of the method was found to be 2.5, and the total preconcentration procedure can be completed in 1 h. Characterization of synthesised particles were executed with various techniques. Due to its suitable limit of detection, dynamic linear range, sensitivity and selectivity, the developed method seemed to be ideal for the determination and preconcentration of imidacloprid in water and fruit samples.

Molecularly Imprinted Silica-Coated CdTe Quantum Dots for Fluorometric Determination of Trace Chloramphenicol

A dual recognition system with a fluorescence quenching of quantum dots (QDs) and specific recognition of molecularly imprinted polymer (MIP) for the detection of chloramphenicol (CAP) was constructed. MIP@SiO₂@QDs was prepared by reverse microemulsion method with 3-aminopropyltriethoxysilane (APTS), tetraethyl orthosilicate (TEOS) and QDs being used as the functional monomer, cross-linker and signal sources, respectively. MIP can specifically recognize CAP, and the fluorescence of QDs can be quenched by CAP due to the photo-induced electron transfer reaction between CAP and QDs. Thus, a method for the trace detection of CAP based on MIP@SiO₂@QDs fluorescence quenching was established. The fluorescence quenching efficiency of MIP@SiO₂@QDs displayed a desirable linear response to the concentration of CAP in the range of 1.00~4.00 × 10² μmol × L⁻¹, and the limit of detection was 0.35 μmol × L⁻¹ (3σ, n = 9). Importantly, MIP@SiO₂@QDs presented good detection selectivity owing to specific recognition for CAP, and was successfully applied to quantify CAP in lake water with the recovery ranging 102.0~104.0%, suggesting this method has the promising potential for the on-site detection of CAP in environmental waters.

Imprinting Technology for Effective Sorbent Fabrication: Current State-of-Art and Future Prospects

In the last 10 years, we have witnessed an extensive development of instrumental techniques in analytical methods for determination of various molecules and ions at very low concentrations. Nevertheless, the presence of interfering components of complex samples hampered the applicability of new analytical strategies. Thus, additional sample pre-treatment steps were proposed to overcome the problem. Solid sorbents were used for clean-up samples but insufficient selectivity of commercial materials limited their utility. Here, the application of molecularly imprinted polymers (MIPs) or ion-imprinted polymers (IIPs) in the separation processes have recently attracted attention due to their many advantages, such as high selectivity, robustness, and low costs of the fabrication process. Bulk or monoliths, microspheres and core-shell materials, magnetically susceptible and stir-bar imprinted materials are applicable to different modes of solid-phase extraction to determine target analytes and ions in a very complex environment such as blood, urine, soil, or food. The capability to perform a specific separation of enantiomers is a substantial advantage in clinical analysis. The ion-imprinted sorbents gained interest in trace analysis of pollutants in environmental samples. In this review, the current synthetic approaches for the preparation of MIPs and IIPs are comprehensively discussed together with a detailed characterization of respective materials. Furthermore, the use of sorbents in environmental, food, and biomedical analyses will be emphasized to point out current limits and highlight the future prospects for further development in the field.

Defective Zr-based metal-organic frameworks as sorbent for the determination of fungicides in environmental water samples by rapid dispersive micro-solid-phase extraction coupled to liquid chromatography/mass spectrometry

In this work, defective Zr-based metal-organic framework was successfully synthesized and evaluated as a dispersive micro-solid-phase extraction sorbent for efficient preconcentration and determination of fungicides in complex water samples. The defective Zr-based metal-organic framework crystal with increased adsorption capacity was successfully synthesized by employing formic acid as the modulator. The extraction conditions, including the pH, extraction time, desorption solvent and desorption time, were comprehensively investigated. Under optimum conditions, it was found that dispersive micro-solid-phase extraction method, coupled with liquid chromatography/mass spectrometry, exhibited a good linear relationship with correlation coefficients greater than 0.9980. The relative standard deviations of inter-day and intra-day precisions ranged from 2.6 to 9.2% and the limits of detection ranged from 0.004 to 0.036 μg/L. These merits, combined with their satisfactory recoveries (>80%), suggested the great potential of defective Zr-based metal-organic framework as a new adsorbent for efficient extraction of trace fungicides. This method exhibits good application potential for the pretreatment of fungicides from environmental water samples.

[Recent advances in applications of fragment/dummy molecularly imprinted polymers]

Molecularly imprinted polymers (MIPs) are designed to mimic the specific binding principle of enzymes to substrates or antigens to antibodies, while holding several advantages such as structure predictability, recognition specificity, easy preparation, low cost, high physical robustness, and thermal stability. Therefore, they have been widely applied in many fields including sample preparation (pretreatment), sensing analysis (chemo/biosensors), biomedicine, and environment/food analysis. To date, several strategies were developed for MIPs preparation, aiming to simplify the preparation process and/or improve the properties of the polymers, greatly broadening its usability. The exploration in various advanced imprinting strategies and their combinational use has become a research hotspot in MIPs preparation, among which the fragment imprinting strategy and the dummy template imprinting strategy are especially favored. Fragment imprinting, also called segment imprinting, uses a partial structure of the target molecule as a pseudo-template to prepare MIPs. This strategy is useful to target molecules that are not easy to obtain or that are too large to be used as templates, providing a feasible method for imprinting target analytes that are easy to inactivate or infect, as well as macromolecules that are difficult to imprint. In turn, dummy template imprinting uses molecules with structure, shape, and size similar to the target analytes as templates for imprinting. Because the target is not directly used as a template, this strategy can overcome problems of template leakage, as well as solve target molecule-related difficulties as they can be expensive, infectious, flammable, explosive, or chemically instable. This mini-review compiles information of several articles published in the last four years across ACS, Elsevier, RSC, and other databases, summarizing the most recent advances in the application of fragment/dummy template MIPs (FMIPs/DMIPs). Herein, the biomedical application of FMIPs is mainly addressed as a strategy for the detection of proteins and microorganisms, and the application of FMIPs in the field of food analysis is also explored. In recent years, the imprinting of mammalian cells has made some progress in the application of FMIPs. Mammalian cells, especially cancer cells, overexpress some proteins and sugars, which are good fragment templates. Consequently, the fragment imprinting strategy is widely used in cancer cell imaging, localization, and treatment. Moreover, due to the complicated structure and easy inactivation of some proteins, their MIPs are often prepared by fragment imprinting (also called epitope imprinting). As some microorganisms are infectious, imprinting microorganisms directly can pose a risk; therefore it is safer to also use the fragment imprinting strategy in such cases. The recent application of fragment imprinting strategy in other areas remains scarce. Nonetheless, three studies in the food analysis have explored this possibility. DMIPs are widely used in sample pretreatment and sensing analysis, and they are mainly used as SPE adsorbents for packed SPE, dispersive SPE (DSPE), magnetic SPE (MSPE), and matrix solid phase dispersion (MSPD) extraction. In addition, DMIPs are employed as molecularly imprinted membrane materials. As a result, by virtue of DMIPs, selective extraction and enrichment of target analytes from complicated samples can be achieved. MIP-based sensors can either recognize or transduce, meaning that they can specifically recognize and bind target analytes as well as generate output signals for detection. Because of the high selectivity of MIPs, the use of a dummy template imprinting strategy solves the problem of template leakage in the process of recognition and adsorption, further improving the detection accuracy and sensitivity of the sensor. These features expand the application range of MIP-based sensors. This review briefly overviews the construction and application of chemiluminescence and fluorescence sensors based on DMIPs. Lastly, the advantages and disadvantages, differences, and relationships among the two strategies are summarized. Despite of their potential, four main challenges still remain as major setbacks for the application of FMIPs and DMIPs: (i) the difficulty to select or prepare appropriate fragment templates and dummy templates; (ii) how to ensure that there is almost no difference in the recognition adsorption selectivity between the fragment/dummy template and the original template, so as to ensure optimal recognition specificity; (iii) the use of, environment-friendly reagents to reduce pollution during FMIPs/DMIPs preparation and use to conform with green chemistry requirements; (iv) how to strengthen the industrial and commercial applications of FMIPs and DMIPs. Therefore, significant efforts should be made to develop new imprinting strategies and techniques, as well as to adopt combinational imprinting approaches for FMIPs/DMIPs preparation to expedite the sustainable development and efficient application of FMIPs and DMIPs.

Recent advances and applications of molecularly imprinted polymers in solid-phase extraction for real sample analysis

Sample pretreatment is essential for the analysis of complicated real samples due to their complex matrices and low analyte concentrations. Among all sample pretreatment methods, solid-phase extraction is arguably the most frequently used one. However, the majority of available solid-phase extraction adsorbents suffer from limited selectivity. Molecularly imprinted polymers are a type of tailor-made artificial antibodies and receptors with specific recognition sites for target molecules. Using molecularly imprinted polymers instead of conventional adsorbents can greatly improve the selectivity of solid-phase extraction, and therefore molecularly imprinted polymer-based solid-phase extraction has been widely applied to separation, clean up and/or preconcentration of target analytes in various kinds of real samples. In this article, after a brief introduction, the recent developments and applications of molecularly imprinted polymer-based solid-phase extraction for determination of different analytes in complicated real samples during the 2015-2020 are reviewed systematically, including the solid-phase extraction modes, molecularly imprinted adsorbent types and their preparations, and the practical applications of solid-phase extraction to various real samples (environmental, food, biological, and pharmaceutical samples). Finally, the challenges and opportunities of using molecularly imprinted polymer-based solid-phase extraction for real sample analysis are discussed.