Core-shell nanomaterials: Applications in energy storage and conversion

Cu2S/C@NiMnCe-layered double hydroxide with core-shell rods array structure as the cathode for high performance supercapacitors

The selection of highly efficient materials and the construction of advantageous structures are essential for realizing high-performance electrode materials. In this paper, electrode material Cu2S/C@NiMnCe-LDH/CF with excellent morphology and high performance has been successfully designed and prepared by simple hydrothermal and calcination techniques. First, ZIF-67 is loaded on the outer layer of Cu2S rods to obtain core-shell structured Cu2S@ZIF-67 rods, whose ZIF-67 MOF shell is carbonized to obtain Cu2S@C rods. Then, NiMnCe-LDH are epitaxially loaded on the outer layer of Cu2S@C to obtain Cu2S/C@NiMnCe-LDH rods. At a current density of 2 mA cm-2, Cu2S/C@NiMnCe-LDH/CF exhibits an area capacitance of 5176.4 mF cm-2. The mass capacitance and the energy density of the Cu2S/C@NiMnCe-LDH/CF//AC asymmetric supercapacitor (ASC) reach 150.82F g-1 at a sweep rate of 0.8 A/g and 53.62 Wh kg-1 at a power density of 639.99 W kg-1, respectively. Meanwhile, after 8000 electrochemical cycles, the specific capacitance of Cu2S/C@NiMnCe-LDH/CF//AC still has a retention rate of 86.32 %, which proves its excellent cycling stability. These results demonstrate a new strategy for the preparation of novel core-shell structured Cu2S/C@NiMnCe-LDH/CF nanocomposite material for electrode materials of energy storage devices with superb performance.

A "core-shell" structure imparting both gas barrier and UV shielding properties for a PLA/ PGA/ PBS ternary blend film

The core-shell structure enhances polymer blend systems by orderly assembly and leveraging complementary properties. This study aims to enhance the flexibility and barrier properties of polylactic acid (PLA, L) by blending it with polyglycolic acid (PGA, G) for gas barrier and polybutylene succinate (PBS, B) for flexibility. Encapsulating PGA in a core-shell structure using PBS resolves PGA's rapid hydrolysis issue. The theoretical models predicting dispersion patterns based on spreading coefficients and interfacial tensions were validated through SEM observations, confirming the formation of a core-shell structure in the 5L1G4B ternary blend. Compared to the PLA/PBS binary blend film, samples with PGA (5L1G4B and 4L1G5B) exhibit higher elongation at break and tearing strength. For instance, the elongation at break of the 5L1G4B sample increases from 272.3 % of 6L4B to 470.85 %. The 5L1G4B showed comparable oxygen and carbon dioxide barrier properties to the 6L4B sample. The 5L1G4B and 4L1G5B samples show <2 % UV transmittance in the UVA region, indicating excellent UV shielding. The 5L1G4B blend film, with its mechanical properties, oxygen barrier, UV resistance, and biodegradability, is ideal for outer layer packaging film and has the potential to replace LDPE in packaging juice and dairy product bottles.

Research progress in tumor therapy of carrier-free nanodrug

Carrier-free nanodrugs are a novel type of drug constructed by the self-assembly of drug molecules without carrier involvement. They have the characteristics of small particle size, easy penetration of various barriers, targeting tumors, and efficient release. In recent years, carrier-free nanodrugs have become a hot topic in tumor therapy as they solve the problems of low drug loading, poor biocompatibility, and low uptake efficiency of carrier nanodrugs. A series of recent studies have shown that carrier-free nanodrugs play a vital role in the treatment of various tumors, with similar or better effects than carrier nanodrugs. Based on the literature published in the past decades, this paper first summarizes the recent progress in the assembly modes of carrier-free nanodrugs, then describes common therapeutic modalities of carrier-free nanodrugs in tumor therapy, and finally depicts the existing challenges along with future trends of carrier-free nanodrugs. We hope that this review can guide the design and application of carrier-free nanodrugs in the future.

Recent Development on Transition Metal Oxides-Based Core-Shell Structures for Boosted Energy Density Supercapacitors

In recent years, nanomaterials exploration and synthesis have played a crucial role in advancing energy storage research, particularly in supercapacitor development. Researchers have diversified materials, including metal oxides, chalcogenides, and composites, as well as carbon materials, to enhance energy and power density. Balancing energy density with electrochemical stability remains challenging, driving intensified efforts in advancing electrode materials. This review focuses on recent progress in designing and synthesizing core-shell materials tailored for supercapacitors. The core-shell architecture offers advantages such as increased surface area, redox active sites, electrical conductivity, ion diffusion kinetics, specific capacitance, and cyclability. The review explores the impact of core and shell materials, specifically transition metal oxides (TMOs), on supercapacitor electrochemical behavior. Metal oxide choices, such as cobalt oxide as a preferred core and manganese oxide as a shell, are discussed. The review also highlights characterization techniques for assessing structural, morphological, and electrochemical properties of core-shell materials. Overall, it provides a comprehensive overview of ongoing TMOs-based core-shell material research for supercapacitors, showcasing their potential to enhance energy storage for applications ranging from gadgets to electric vehicles. The review outlines existing challenges and future opportunities in evolving TMOs-based core-shell materials for supercapacitor advancements, holding promise for high-efficiency energy storage devices.

Efficientand Robust Automated Segmentation of Nanoparticles and Aggregates from Transmission Electron Microscopy Images with Highly Complex Backgrounds

Morphologies of nanoparticles and aggregates play an important role in their properties for a range of applications. In particular, significant synthesis efforts have been directed toward controlling nanoparticle morphology and aggregation behavior in biomedical applications, as their size and shape have a significant impact on cellular uptake. Among several techniques for morphological characterization, transmission electron microscopy (TEM) can provide direct and accurate characterization of nanoparticle/aggregate morphology details. Nevertheless, manually analyzing a large number of TEM images is still a laborious process. Hence, there has been a surge of interest in employing machine learning methods to analyze nanoparticle size and shape. In order to achieve accurate nanoparticle analysis using machine learning methods, reliable and automated nanoparticle segmentation from TEM images is critical, especially when the nanoparticle image contrast is weak and the background is complex. These challenges are particularly pertinent in biomedical applications. In this work, we demonstrate an efficient, robust, and automated nanoparticle image segmentation method suitable for subsequent machine learning analysis. Our method is robust for noisy, low-electron-dose cryo-TEM images and for TEM cell images with complex, strong-contrast background features. Moreover, our method does not require any a priori training datasets, making it efficient and general. The ability to automatically, reliably, and efficiently segment nanoparticle/aggregate images is critical for advancing precise particle/aggregate control in biomedical applications.

Flame synthesis of nanoparticles based on high flux electrostatic atomization burner

This study presents an innovative electrostatic spray flame synthesis (ESFS) reactor that combines the advantages of electrostatic spray and flame synthesis for precise spray control and efficient single-step continuous synthesis. To overcome the limitations of conventional ESFS systems, which often suffer from low atomized precursor flux, we successfully demonstrated a high-flux disk electrostatic atomizer coupled low-swirl flame reactor, achieving a precursor flux of up to 30 ml/h about 30 times higher than that of typical ESFS devices. The atomized precursor being rapidly carried away from the burner is undergoing high-temperature pyrolysis and particle formation through lifted premixed turbulent flames. The ESFS system provides extensive control over parameters such as flame temperature, equivalence ratio, residence time, initial droplet sizes, and precursor concentrations. For illustrative purposes, the ESFS system was utilized to synthesize silica nanoparticles, demonstrating the capability of synthesizing nanoparticles with various properties. By manipulating the collection position and height, the particle size has made a substantial leap from the nanoscale to the micrometer level. This remarkable achievement underscores the system's enormous potential for precise particle size regulation and one-step synthesis of complex structured thin films.

Exploring Recent Developments in Graphene-Based Cathode Materials for Fuel Cell Applications: A Comprehensive Overview

Fuel cells are at the forefront of modern energy research, with graphene-based materials emerging as key enhancers of performance. This overview explores recent advancements in graphene-based cathode materials for fuel cell applications. Graphene's large surface area and excellent electrical conductivity and mechanical strength make it ideal for use in different solid oxide fuel cells (SOFCs) as well as proton exchange membrane fuel cells (PEMFCs). This review covers various forms of graphene, including graphene oxide (GO), reduced graphene oxide (rGO), and doped graphene, highlighting their unique attributes and catalytic contributions. It also examines the effects of structural modifications, doping, and functional group integrations on the electrochemical properties and durability of graphene-based cathodes. Additionally, we address the thermal stability challenges of graphene derivatives at high SOFC operating temperatures, suggesting potential solutions and future research directions. This analysis underscores the transformative potential of graphene-based materials in advancing fuel cell technology, aiming for more efficient, cost-effective, and durable energy systems.

NIR-II imaging-guided precise photodynamic therapy for augmenting tumor-starvation therapy by glucose metabolism reprogramming interference

Metabolic reprogramming is a mechanism by which cancer cells alter their metabolic patterns to promote cell proliferation and growth, thereby enabling their resistance to external stress. 2-Deoxy-D-glucose (2DG) can eliminate their energy source by inhibiting glucose glycolysis, leading to cancer cell death through starvation. However, a compensatory increase in mitochondrial metabolism inhibits its efficacy. Herein, we propose a synergistic approach that combines photodynamic therapy (PDT) with starvation therapy to address this challenge. To monitor the nanodrugs and determine the optimal triggering time for precise tumor therapy, a multifunctional nano-platform comprising lanthanide-doped nanoparticle (LnNP) cores was constructed and combined with mesoporous silicon shells loaded with 2DG and photosensitizer chlorin e6 (Ce6) in the mesopore channels. Under 980 nm near-infrared light excitation, the downshifted 1550 nm fluorescence signal in the second near-infrared (NIR-II, 1000-1700 nm) window from the LnNPs was used to monitor the accumulation of nanomaterials in tumors. Furthermore, upconverted 650 nm light excited the Ce6 to generate singlet oxygen for PDT, which damaged mitochondrial function and enhanced the efficacy of 2DG by inhibiting hexokinase 2 and lactate dehydrogenase A expressions. As a result, glucose metabolism reprogramming was inhibited and the efficiency of starvation therapy was significantly enhanced. Overall, the proposed NIR-II bioimaging-guided PDT-augmented starvation therapy, which simultaneously inhibited glycolysis and mitochondria, facilitated the effects of a cancer theranostic system.

Schiff Base Complex of Copper Immobilized on Core-Shell Magnetic Nanoparticles Catalyzed One-Pot Syntheses of Polyhydroquinoline Derivatives under Mild Conditions Supported by a DFT Study

We synthesized a stable and reusable Schiff base complex of copper immobilized on core-shell magnetic nanoparticles [Cu(II)-SB/GPTMS@SiO2@Fe3O4] with simple, efficient, and available materials. A variety of characterization analyses including Fourier transform infrared (FT-IR), X-ray photoelectron spectroscopy (XPS), field-emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Brunauer-Emmett-Teller (BET), thermogravimetric analysis (TGA), X-ray diffraction (XRD), vibrating-sample magnetometry (VSM), energy-dispersive X-ray spectrometry (EDX), and inductively coupled plasma (ICP) confirm that our synthesized nanocatalyst was obtained. The particle size distribution from the TEM image was obtained in the range of 42-55 nm. The existence of cupric species (Cu2+) in the catalyst was determined with XPS analysis and clearly indicated two peaks at 933.7 and 953.7 eV for Cu 2p3/2 and Cu 2p1/2, respectively. BET results showed that our catalyst synthesized with a mesoporous structure and with a specific area of 48.82 m2 g-1. After detailed characterization, the resulting nanocatalyst exhibited excellent catalytic performance for the explored catalytic reactions in the one-pot synthesis of polyhydroquinoline derivatives by the Hantzsch reaction of dimedone, ethyl acetoacetate, ammonium acetate, and various aldehydes under sustainable and mild conditions. The corresponding products 5a-l are achieved in yields of 88-97%. Additionally, density functional theory (DFT) calculations were carried out to investigate the electrostatic potential root (ESP), natural bond orbital (NBO), and molecular orbitals (MOs), drawing the reaction mechanism using the total energy of the reactant and product and the study of structural parameters.

A Surfactant-Free and General Strategy for the Synthesis of Bimetallic Core-Shell Nanocrystals on Reduced Graphene Oxide through Targeted Photodeposition

Tunable physicochemical properties of bimetallic core-shell heterostructured nanocrystals (HNCs) have shown enormous potential in electrocatalytic reactions. In many cases, HNCs are required to load on supports to inhibit catalyst aggregation. However, the introduction of supports during the process of growing core-shell HNCs makes the synthesis much more complicated and difficult to control precisely. Herein, we reported a universal photochemical synthetic strategy for the controlled synthesis of well-defined surfactant-free core-shell metal HNCs on a reduced graphene oxide (rGO) support, which was assisted by the fine control of photogenerated electrons directly transferring to the targeted metal seeds via rGO and the precisely tuned adsorption capacity of the added second metal precursors. The surface photovoltage microscopy (SPVM) platform proved that photogenerated electrons flowed through rGO to Pd particles under illumination. We have successfully synthesized 24 different core-shell metal HNCs, i.,e., M_A@M_B (M_A = Pd, Au, and Pt; M_B = Au, Ag, Pt, Pd, Ir, Ru, Rh, Ni and Cu), on the rGO supports. The as-prepared Pd@Cu core-shell HNCs showed outstanding performance in the electrocatalytic reduction of CO₂ to CH₄. This work could shed light on the controlled synthesis of more functional bimetallic nanostructured materials on diverse supports for various applications.

Nanoheterostructure by Liquid Metal Sandwich-Based Interfacial Galvanic Replacement for Cancer Targeted Theranostics

Nanoheterostructures with exquisite interface and heterostructure design find numerous applications in catalysis, plasmonics, electronics, and biomedicine. In the current study, series core-shell metal or metal oxide-based heterogeneous nanocomposite have been successfully fabricated by employing sandwiched liquid metal (LM) layer (i.e., LM oxide/LM/LM oxide) as interfacial galvanic replacement reaction environment. A self-limiting thin oxide layer, which would naturally occur at the metal-air interface under ambient conditions, could be readily delaminated onto the surface of core metal (Fe, Bi, carbonyl iron, Zn, Mo) or metal oxide (Fe₃ O₄ , Fe₂ O₃ , MoO₃ , ZrO₂ , TiO₂ ) nano- or micro-particles by van der Waals (vdW) exfoliation. Further on, the sandwiched LM layer could be formed immediately and acted as the reaction site of galvanic replacement where metals (Au, Ag, and Cu) or metal oxide (MnO₂ ) with higher reduction potential could be deposited as shell structure. Such strategy provides facile and versatile approaches to design and fabricate nanoheterostructures. As a model, nanocomposite of Fe@Sandwiched-GaIn-Au (Fe@SW-GaIn-Au) is constructed and their application in targeted magnetic resonance imaging (MRI) guided photothermal tumor ablation and chemodynamic therapy (CDT), as well as the enhanced radiotherapy (RT) against tumors, have been systematically investigated.

Metal-organic frameworks-derived layered double hydroxides: From controllable synthesis to various electrochemical energy storage/conversion applications

Over the past years, metal-organic frameworks (MOF) have been directly used as electrodes or as a precursor for MOF-derived materials in energy storage and conversion systems. In the wide range of existing MOF derivatives, MOF-derived layered double hydroxides (LDHs) are determined to be promising materials due to their unique structure and features. However, MOF-derived LDHs (MDL) materials can suffer from insufficient intrinsic conductivity and agglomeration during formation. Various techniques and approaches were designed and applied to tackle these problems, such as using ternary LDHs, ion-doping, sulphurization, phosphorylation, selenization, direct growth, and conductive substrates. All the mentioned enhancement techniques aim to create the ideal electrode materials with maximum performance. In this review, we gathered and discussed the most recent progressive advances, different synthesis methodologies, unsolved challenges, applications, and electrochemical and electrocatalytic performance of MDL materials. We hope this work will be a reliable source for future progress and synthesis of these materials.

Recent Advances of Core-Shell Cu-Based Catalysts for the Reduction of CO2 to C2+ Products

Copper is a key metal for carbon dioxide (CO₂ ) reduction reaction, which can reduce CO₂ to value-added products. The core-shell structure can effectively promote the C-C coupling process due to its strong synergistic effect originated from its unique electronic structure and interface environment. Therefore, the combination of copper and core-shell structure to design an efficient Cu-based core-shell structure catalyst is of great significance for electrocatalytic CO₂ reduction (CO₂ RR). In this review, we first briefly summarize the basic principle of CO₂ RR. In addition, we outline the advantages of core-shell structure for catalysis. Then, we review the recent research progresses of Cu-based core-shell structures for the selective reduction of multi-carbon (C₂₊ ) products. In the end, the challenges of using core-shell catalyst for CO₂ RR are described, and the future development of this field is prospected.

Engineering 2D Aligned Nanowires Assembled Porous Hetero-Membrane for Smart Ion Transport

Engineering 2D nanosheets with well-defined porous structures and their assembled heterostructure membrane is a promising method to improve osmotic energy conversion. However, it is still a great challenge to directly fabricate 2D nanosheets with regular parallel nanochannels in aqueous media. Here, the desired functional nanosheets and heterostructure membrane device are successfully prepared through a simple interfacial assembly strategy. In this method, monolayer cylindrical monomicelles closely arrange and assemble on the surfaces of graphene oxide, and the resulting nanosheets with monolayered aligned nanowire polymer arrays parallel to the substrate surfaces are then obtained. Subsequently, a heterostructured membrane is constructed by assembling these 2D nanosheets on macroporous alumina. The nanofluidic membrane device with asymmetric geometry and charge polarity exhibits smart ion transport properties, and the output osmotic power density is ≈1.22 and 1.63 times over the reported pure 2D graphene oxide and biomass-derived membranes, respectively. In addition, theoretical calculations are carried out to reveal the mechanisms for ion selectivity and salinity gradient energy conversion. This monolayered interfacial assembly approach can open up new avenues for the synthesis of functional porous low-dimensional nanomaterials and membrane devices, and expand the palette of materials selection for many applications.

Synthesis of silver core-shell nanoparticles and their influence on an experimental resin endodontic sealer: An in vitro analysis

AIM

To avoid root canal recontamination and endodontic treatment failure, endodontic sealers with antibacterial activity could be an alternative. Silver nanoparticles have antibacterial activity and this study aimed to synthesize Ag@SiO₂ nanoparticles, incorporate them into an experimental endodontic resin sealer and evaluate their influence on physicochemical and biological properties.

METHODOLOGY

Ag@SiO₂ nanoparticles were produced using the sol-gel process, based on the Stöber method. The particles were characterized in terms of their chemical structure by Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), thermogravimetric analysis (TGA), UV-Vis spectral analysis, scanning electron microscopy, and transmission electron microscopy, where the particle morphology and diameter were analysed. A dual-cured experimental endodontic resin sealer was formulated using 70 wt% UDMA, 15 wt% GDMA, and 15 wt% BisEMA. The photoinitiators were added separately in two pastes. The Ag@SiO₂ nanoparticles were incorporated into the endodontic sealer at the concentrations of 2.5 wt%, 5 wt%, and 10 wt%, and a control group without nanoparticles was also formulated. The endodontic sealers were evaluated for their flow, film thickness, degree of conversion, softening in solvent, radiopacity, cytotoxicity and antibacterial activity immediately and after 9 months in water storage.

RESULTS

Silver was detected in the chemical characterization of Ag@SiO₂ that presented a spheric regular shape and average 683.51 nm ± 93.58 diameter. Sealers presented adequate flow and film thickness while radiopacity values were below the ones required by ISO 6876. All groups underwent softening after immersion in a solvent. The 10 wt% groups showed a higher loss of subsurface hardness (∆KHN%). No reduction in cell viability was observed. Enterococcus faecalis viability in biofilm was reduced in 10 wt% groups after 24 h and 9 months.

CONCLUSION

The addition of 10 wt% Ag@SiO₂ reduced E. faecalis viability at immediate and longitudinal analysis while maintaining the physicochemical properties of developed sealers.

Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives

The unique biological and physicochemical characteristics of biogenic (green-synthesized) nanomaterials (NMs) have attracted significant interest in different fields, with applications in the agrochemical, food, medication delivery, cosmetics, cellular imaging, and biomedical industries. To synthesize biogenic nanomaterials, green synthesis techniques use microorganisms, plant extracts, or proteins as bio-capping and bio-reducing agents and their role as bio-nanofactories for material synthesis at the nanoscale size. Green chemistry is environmentally benign, biocompatible, nontoxic, and economically effective. By taking into account the findings from recent investigations, we shed light on the most recent developments in the green synthesis of nanomaterials using different types of microbes and plants. Additionally, we cover different applications of green-synthesized nanomaterials in the food and textile industries, water treatment, and biomedical applications. Furthermore, we discuss the future perspectives of the green synthesis of nanomaterials to advance their production and applications.

Mechanisms for self-templating design of micro/nanostructures toward efficient energy storage

The ever-growing demand in modern power systems calls for the innovation in electrochemical energy storage devices so as to achieve both supercapacitor-like high power density and battery-like high energy density. Rational design of the micro/nanostructures of energy storage materials offers a pathway to finely tailor their electrochemical properties thereby enabling significant improvements in device performances and enormous strategies have been developed for synthesizing hierarchically structured active materials. Among all strategies, the direct conversion of precursor templates into target micro/nanostructures through physical and/or chemical processes is facile, controllable, and scalable. Yet the mechanistic understanding of the self-templating method is lacking and the synthetic versatility for constructing complex architectures is inadequately demonstrated. This review starts with the introduction of five main self-templating synthetic mechanisms and the corresponding constructed hierarchical micro/nanostructures. Subsequently, the structural merits provided by the well-defined architectures for energy storage are elaborately discussed. At last, a summary of current challenges and future development of the self-templating method for synthesizing high-performance electrode materials is also presented.

Delicate and Independent Manipulation of Dynamic Fluorescence Behavior of Polymer Nanoparticles Based on a Core-Shell Strategy

Fluorescent polymer nanomaterials with dynamic fluorescence properties hold great potential in many advanced applications, including but not limited to information encryption, adaptive camouflage, and biosensors. The key to improving the application value of materials is to establish an accurate control strategy for dynamic fluorescence behavior. Herein, we develop a core-shell engineering strategy to precisely and independently manipulate the dynamic fluorescence behavior through the shell polymeric matrix. The core-shell fluorescent polymer nanoparticles (CS-FPNPs) are constructed through a sequential process of miniemulsion polymerization and seeded emulsion polymerization. Taking advantage of the core-shell structure, the rigid core matrix ensures the strong initial emission of AIE units, while the photoisomerization behavior of spiropyrane (SP) units is delicately and independently regulated by the rigidness of the shell matrix. Thereby, CS-FPNPs exhibit bright time-dependent reversible dynamic fluorescence behavior under alternating UV/vis irradiation. Benefited from the excellent processability and film formation ability, we have successfully applied CS-FPNPs to dynamic decorative painting, warning labels, and dynamic QR code security. Impressively, the fluorescence manipulation strategy based on core-shell engineering allows the independent regulation of specific luminescent units in complicated emission systems to accurately embody designed emission behavior.

Construction of a binder-free non-enzymatic glucose sensor based on Cu@Ni core-shell nanoparticles anchored on 3D chiral carbon nanocoils-nickel foam hierarchical scaffold

Bimetallic nanostructures composited with carbonaceous materials are the potential contenders for quantitative glucose measurement owing to their unique nanostructures, high biomimetic activity, synergistic effects, good conductivity and chemical stability. In the present work, chemical vapors deposition technique has been employed to grow 3D carbon nanocoils (CNCs) with a chiral morphology on hierarchical macroporous nickel foam (NF) to get a CNCs/NF scaffold. Following, bimetallic Cu@Ni core-shell nanoparticles (CSNPs) are effectively coupled with this scaffold through a facile solvothermal route in order to fabricate a binder-free novel Cu@Ni CSNPs/CNCs/NF hybrid nanostructure. The constructed free-standing 3D hierarchical composite electrode guarantees highly efficient glucose redox activity due to core-shell synergistic effects, enhanced electrochemical active surface area, excellent electrochemical stability, improved conductivity with better ion diffusivity and accelerated reaction kinetics. Being a non-enzymatic glucose sensor, this electrode achieves highly swift response time of 0.1 s, ultra-high sensitivity of 6905 μA mM^-1 cm^-2, low limit of detection of 0.03 μM along with potential selectivity and good storage stability. Moreover, the proposed sensor is also tested successfully for the determination of glucose concentration in human serum samples under good recovery ranging from 96.6 to 102.1 %. The 3D Cu@Ni CSNPs/CNCs/NF composite electrode with unprecedented catalytic performance can be utilized as an ideal biomimetic catalyst in the field of non-enzymatic glucose sensing.

Enhanced electro-oxidation performance of FeCoLDH to organic pollutants using hydrophilic structure

Iron-cobalt layered double hydroxides (FeCoLDH) showed superior oxygen evolution reaction (OER) performance, but the sluggish water adsorption and dissociation dynamics restrict its capacity to degrade organic pollutants by electro-oxidation. Herein, enhanced electro-oxidation performance of FeCoLDH with hydrophilic structure was designed and exhibited efficient removal efficiency of tetracycline. Theoretical calculation and characterization results consistently elucidated that the electronic structure of FeCoLDH is optimized by doping phosphorus and depositing copper nanodots (NDs). In addition, the obtained Cu NDs/P-FeCoLDH shows higher degradation ability of tetracycline in all-pH conditions than pristine FeCoLDH. That's because it owns smaller barrier with 0.6 eV to generate hydroxyl radicals (•OH) than pristine FeCoLDH. Furthermore, it can effectively degrade organic pollutants in seawater, river water and pharmaceutical wastewater samples. This work provides novel and rational electrode materials for electro-oxidation system with practical application potential, which could offer new insights into the fundamental understanding of electrochemistry.

Single Atom Catalysts: An Overview of the Coordination and Interactions with Metallic Supports

Catalyst utilization is a key economic factor in heterogeneous catalysis, particularly, when noble metals are used as the active phase. A huge saving on catalyst cost can be achieved with developing a single atomic layer of the active catalyst on a given cheap support. Besides the economic benefit, single atom catalysts (SACs) have also shown superior activity and selectivity relative to catalytic particles or nanoparticles; yet they are prone to aggregation and deactivation. The development of effective, stable, and commercially viable SACs is still a huge challenge. One of the remaining key obstacles is the ability to easily and effectively tune SACs-support interactions and coordination in a way that enables the production of robust, stable, and versatile SACs. Accordingly, the coordination and interactions between metallic supports and SACs and their impacts on SACs stability and activity are reviewed in this article.

Fabrication of nonenzymatic electrochemical sensor based on Zn@ZnO core-shell structures obtained via pulsed laser ablation for selective determination of hydroquinone

Herein, we fabricated a more sensitive nonenzymatic electrochemical sensor for the selective determination of hydroquinone as a targeted pollutant at zinc@zinc oxide (Zn@ZnO) core-shell nanostructures. The nanostructured Zn@ZnO materials were produced using pulsed laser ablation in an aqueous medium without the use of any reducing agents or surfactants. The detailed structural, morphological, elemental composition, and electrochemical voltammetric analyses revealed a significant improvement in Zn@ZnO performance for selective hydroquinone detection. A broad linear calibration response was obtained as 10-90 μM with high sensitivity of 0.5673 μA μM^-1 cm^-2 and the low detection limit was 0.10443 μM for detection of hydroquinone. The modified Zn@ZnO electrode's excellent electrochemical sensing performance was attributed to the accessibility of a high electrochemically active surface area (EASA = 0.00345 μF/cm²) and an improved electron transfer rate. Stability and antiinterference tests were also carried out. A 100 fold increase in the concentration of common cations and anions (Na⁺, Mg²⁺, Cl^-, SO₄^2-, and NO₃^-) did not affect the selective determination of HQ. As a result, the fabricated electrochemical sensor has a wide range of potential applications in environmental and biomedical science.

Self-supported metal-organic framework-based nanostructures as binder-free electrodes for supercapacitors

Metal-organic frameworks (MOFs), an interesting class of functional inorganic materials, have recently emerged as suitable electrode materials or templates/precursors of electrode materials for supercapacitors (SCs). The key in utilizing MOF-based electrode materials is to address the low electronic conductivity and poor stability issues. Therefore, the rational design and fabrication of self-supported binder-free electrodes is considered the most promising strategy to address these challenges. In this review, we summarize the recent advances in the design and manufacture of self-supported MOF-based nanostructures and their use as binderless electrodes for SCs, especially over the last five years. The synthesis strategies for constructing pristine MOFs, MOF composites and MOF derivative arrays are overviewed. By highlighting the advantages and challenges of each class of electrode materials, we hope that this review will provide some insights into the rational design of MOF-based electrode materials to promote the future development of this highly exciting field.

Influence of Spatial Dispersion on the Electromagnetic Properties of Magnetoplasmonic Nanostructures

Magnetoplasmonics based on composite nanostructures is widely used in many biomedical applications. Nanostructures, consisting of a magnetic core and a gold shell, exhibit plasmonic properties, that allow the concentration of electromagnetic energy in ultra-small volumes when used, for example, in imaging and therapy. Magnetoplasmonic nanostructures have become an indispensable tool in nanomedicine. The gold shell protects the core from oxidation and corrosion, providing a biocompatible platform for tumor imaging and cancer treatment. By adjusting the size of the core and the shell thickness, the maximum energy concentration can be shifted from the ultraviolet to the near infrared, where the depth of light penetration is maximum due to low scattering and absorption by tissues. A decrease in the thickness of the gold shell to several nanometers leads to the appearance of the quantum effect of spatial dispersion in the metal. The presence of the quantum effect can cause both a significant decrease in the level of energy concentration by plasmon particles and a shift of the maxima to the short-wavelength region, thereby reducing the expected therapeutic effect. In this study, to describe the influence of the quantum effect of spatial dispersion, we used the discrete sources method, which incorporates the generalized non-local optical response theory. This approach made it possible to account for the influence of the nonlocal effect on the optical properties of composite nanoparticles, including the impact of the asymmetry of the core-shell structure on the energy characteristics. It was found that taking spatial dispersion into account leads to a decrease in the maximum value of the concentration of electromagnetic energy up to 25%, while the blue shift can reach 15 nm.

Tuning the Nanoparticle Interfacial Properties and Stability of the Core-Shell Structure in Zn-Doped NiMoO4@AWO4

The ability to tune the interfacial region in core-shell nanocomposites with a surface reconstruction as a source for surface energy (de)stabilization is presented. We consider Zn-doped nickel molybdate (NiMoO₄) (ZNM) as a core crystal structure and AWO₄ (A = Co or Mg) as a shell surface. Based on the density-functional theory method, the interfacial models of Zn-doped NiMoO₄@AWO₄ (ZNM@AW) core@shell structures are simulated and revealed to undergo surface reconstruction on the (-110) and (-202) surfaces of the AW shells, where the surface degradation of ZNM@MW(-110) is observed. The theoretical simulation is validated against the electrochemical performance of supercapacitor studies. To verify, we synthesize the hierarchical ZNM@AW core@shell semiconductor structured nanocomposites grown on a nickel foam conductive substrate using a facile and green two-step hydrothermal method. The morphology and chemical and electrochemical properties of the hierarchically structured nanocomposites are characterized in detail. The performance of the core@shell is significantly affected by the chosen intrinsic properties of metal oxides and exhibited high performance compared to a single-component system in supercapacitors. The proposed asymmetric device, Zn-doped NiMoO₄@CoWO₄ (ZNM@CW)||activated carbon, exhibits a superior pseudo-capacitance, delivering a high areal capacitance of 0.892 F cm^-2 at a current density of 2 mA cm^-2 and an excellent cycling stability of 96% retention of its initial capacitance after 1000 charge-discharge cycles. These fundamental theoretical and experimental insights with the extent of the surface reconstruction sufficiently explain the storage properties of the studied materials.

Effect of Yttria-Stabilized Zirconia Concentration in an Electroless Bath on Microstructure and Composition of Ni/Yttria-Stabilized Zirconia Nanocomposite

The effect of the yttria-stabilized zirconia (YSZ) nanoparticle loading in an electro-less bath was considered as one of the vital synthesis variables for control Ni content and microstructure of prepared nanocomposite particles, which are two crucial factors to achieving high-performance SOFC anode. Nanocomposite particles were prepared using a simple electroless method without any expensive pretreatment of sensitizing by Sn²+ ions as well as activating by Pd²⁺ ions that are usually used to apply nickel coating on the surface of a non-conductive substrate. The process was performed by adding YSZ nanoparticles into NaOH solution, separating them from the solution by the centrifugal method, then providing several water-based nanofluids with different concentrations of activated YSZ nanoparticles, mixing them with NiCI₂ solution, followed by adding the hydrazine and then NaOH solution. X-ray diffraction and scanning electron microscopy coupled with energy dispersive X-ray analysis were used to analyze the prepared nanocomposite particles. It is observed that after adding YSZ nanoparticles into the NaOH solution, the pH of the solution varied gradually from a starting pH of 10.2 to 9. Also, by increasing the YSZ nanoparticles loading in the electroless bath from 76 mg/l to 126 mg/l, the grain size of Ni deposits, the Ni content and the average size of the prepared nanocomposite particles decreased. The electrochemical mechanism previously proposed for the nickel ion reduction was modified, and a novel analytical model was proposed for variation of the efficiency of Ni deposition with YSZ nanoparticles loading.

A Review on Metal- and Metal Oxide-Based Nanozymes: Properties, Mechanisms, and Applications

Since the ferromagnetic (Fe3O4) nanoparticles were firstly reported to exert enzyme-like activity in 2007, extensive research progress in nanozymes has been made with deep investigation of diverse nanozymes and rapid development of related nanotechnologies. As promising alternatives for natural enzymes, nanozymes have broadened the way toward clinical medicine, food safety, environmental monitoring, and chemical production. The past decade has witnessed the rapid development of metal- and metal oxide-based nanozymes owing to their remarkable physicochemical properties in parallel with low cost, high stability, and easy storage. It is widely known that the deep study of catalytic activities and mechanism sheds significant influence on the applications of nanozymes. This review digs into the characteristics and intrinsic properties of metal- and metal oxide-based nanozymes, especially emphasizing their catalytic mechanism and recent applications in biological analysis, relieving inflammation, antibacterial, and cancer therapy. We also conclude the present challenges and provide insights into the future research of nanozymes constituted of metal and metal oxide nanomaterials.

Designing of Nanomaterials-Based Enzymatic Biosensors: Synthesis, Properties, and Applications

Among the many biological entities employed in the development of biosensors, enzymes have attracted the most attention. Nanotechnology has been fostering excellent prospects in the development of enzymatic biosensors, since enzyme immobilization onto conductive nanostructures can improve characteristics that are crucial in biosensor transduction, such as surface-to-volume ratio, signal response, selectivity, sensitivity, conductivity, and biocatalytic activity, among others. These and other advantages of nanomaterial-based enzymatic biosensors are discussed in this work via the compilation of several reports on their applications in different industrial segments. To provide detailed insights into the state of the art of this technology, all the relevant concepts around the topic are discussed, including the properties of enzymes, the mechanisms involved in their immobilization, and the application of different enzyme-derived biosensors and nanomaterials. Finally, there is a discussion around the pressing challenges in this technology, which will be useful for guiding the development of future research in the area.

Improving Lithium-Ion Half-/Full-Cell Performance of WO3 -Protected SnO2 Core-Shell Nanoarchitectures

Anodes derived from SnO₂ offer a greater specific capacity comparative to graphitic carbon in lithium-ion batteries (LIBs); hence, it is imperative to find a simple but effective approach for the fabrication of SnO₂ . The intelligent surfacing of transition metal oxides is one of the favorite strategies to dramatically boost cycling efficiency, and currently most work is primarily aimed at coating and/or compositing with carbon-based materials. Such coating materials, however, face major challenges, including tedious processing and low capacity. This study successfully reports a new and simple WO₃ coating to produce a core-shell structure on the surface of SnO₂ . The empty space permitted natural expansion for the SnO₂ nanostructures, retaining a higher specific capacity for over 100 cycles that did not appear in the pristine SnO₂ without WO₃ shell. Using WO₃ -protected SnO₂ nanoparticles as anode, a coin half-cell battery was designed with Li-foil as counter-electrode. Furthermore, the anode was paired with commercial LiFePO₄ as cathode for a coin-type full cell and tested for lithium storage performance. The WO₃ shell proved to be an effective and strong enhancer for both current rate and specific capacity of SnO₂ nanoarchitectures; additionally, an enhancement of cyclic stability was achieved. The findings demonstrate that the WO₃ can be used for the improvement of cyclic characteristics of other metal oxide materials as a new coating material.

Novel Strategy for Engineering the Metal-Oxide@MOF Core@Shell Architecture and Its Applications in Cataluminescence Sensing

Cataluminescence is an attractive oxydic luminescence on the gas-solid interface, and metal-oxide@MOF core@shell architectures show great potential for cataluminescence sensing due to their integrated synergistic effect from core and shell components. However, restricting the direct nucleation and growth of metal-organic frameworks (MOFs) on the topologically distinct surface of metal oxides is a great challenge, owing to the high interface energy from the topology mismatch. Herein, for the first time, a novel liquid-phase concentration-controlled nucleation strategy is exploited to induce the direct assembly of a ZIF-8 layer on the surface of CeO₂ nanospheres without any sacrificial templates or further surface modifications. The results show that the construction of the CeO₂@ZIF-8 core@shell architecture can be accomplished within 1 min under the mediation of boosted nucleation kinetics. Furthermore, the universality of this developed strategy is demonstrated by the encapsulation of other metal-oxide cores such as magnetic Fe₃O₄ and ZnCo₂O₄ core particles with a ZIF-8 shell. Notably, compared to the pure CeO₂ and ZIF-8, the obtained CeO₂@ZIF-8 nanocomposite exhibits enhanced analytical performance for the cataluminescence sensing of propanal, in which the shell acts as the major catalytic reaction center, while the core contributes to further improving the catalytic efficiency. The proposed facile synthesis strategy with excellent simplicity, rapidity, and universality brings new insights into the engineering of core@shell advanced functional materials with mismatched topologies for catering to the diverse application demands.

Engineering Heterostructured Nanocatalysts for CO2 Transformation Reactions: Advances and Perspectives

As a conceivable route to achieving anthropological carbon looping, carbon capture and utilization (CCU) technologies employ waste CO₂ as an accessible C1 building block to generate upgraded chemicals or fuels, thereby simultaneously remedying environmental issues and energy crises. However, efficient CO₂ conversion is disfavored by both its thermodynamics and its kinetics. Heterostructured materials with well-controlled interfaces have great potential for enhanced catalytic performance in various CO₂ transformation reactions, owing to the synergistic effects among components, numerous interfacial and/or surface active sites, increased CO₂ adsorption capacity, promoted charge transfer efficiency, and unique physicochemical properties. This Review highlights the state of the art in typical heterostructures, such as core-shell, yolk-shell, Janus, hierarchical (branched and hollow), and 2D/2D layered structures, applied for CO₂ conversion with various energy inputs (radiation, electricity, heat). Fabrication methods of different heterostructures and structure-composition-performance relationships are also discussed concisely. Finally, a brief summary and prospective research directions are provided. The motivation of this Review is to offer instructive information on the applicability of inorganic heterostructures for CO₂ transformation reactions, and it is hoped that further enlightening studies in this field could emerge in the future.

Electrochemical energy storage electrodes from fruit biochar

This review investigates the electrochemical energy storage electrode (EESE) as the most important part of the electrochemical energy storage devices (EES) prepared from fruit-derived carbon. The EES devices include batteries, supercapacitors, and hybrid devices that have various regular and advanced applications. The preparation of EESE from fruit wastes not only reduce the price of the electrode but also lead to enhance the electrochemical properties of the electrode. The astonishing results of fruits biochar at electrochemical analyses guarantee the performance of these electrodes as EESE. Also, using fruit waste as the precursor of the EESE due to protect the environment and reduce environmental pollutions.

Core-shell structured cadmium sulfide nanocomposites for solar energy utilization

Solar energy utilization technologies have been widely explored to solve the global energy crisis because the inexhaustible solar energy can be converted into chemical fuel and electricity. Various semiconductors that are crucial for solar energy utilization have been extensively developed. Among them, cadmium sulfide (CdS) has attracted extensive attention due to its suitable band-gap and excellent electrical/optical properties. However, CdS is still limited by rapid charge recombination, instability and low quantum efficiency. Core-shell structures can provide great opportunities for constructing advanced structures with superior properties to overcome the remaining challenges. This review focuses on the significant advances in core-shell structured CdS nanocomposites for solar energy utilization. Initially, the synthetic methods to construct core-shell structured CdS nanocomposites are reviewed. Then the applications in solar energy utilization are discussed, including photocatalytic\photoelectrochemical water splitting, photocatalytic CO₂ reduction and solar cells. Finally, the perspectives of core-shell structured CdS nanocomposites for solar energy utilization are proposed.

Numerical method for analyzing the near-field enhancement of nonspherical dielectric-core metallic-shell particles accounting for the nonlocal dispersion

Over the last few decades, dielectric core and metallic plasmonic shell (Die@Me) nanoparticles have found a wide variety of applications. The trend to reduce the thickness of the metallic coating requires to account for the influence of the nonlocal dispersion on the spectral response of such nanoparticles. In this paper, we use the discrete sources method and the generalized nonlocal optical response model to describe the nonlocality within the plasmonic metal shell. We found that the variation of the plasmonic shell thickness and the elongation of the nonspherical core-shell particle can enlarge the near-field enhancement and the absorption cross section by an order of magnitude. Besides, we show that the nonlocal dispersion can decrease the field enhancement in the wavelength domain up to 2.5 times with a small blue-shift of about 5 nm.

Silicon-nanoparticle-based composites for advanced lithium-ion battery anodes

Lithium-ion batteries (LIBs) play an important role in modern society. The low capacity of graphite cannot meet the demands of LIBs calling for high power and energy densities. Silicon (Si) is one of the most promising materials instead of graphite, because of its high theoretical capacity, low discharge voltage, low cost, etc. However, Si shows low conductivity of both ions and electrons and exhibits a severe volume change during cycles. Fabricating nano-sized Si and Si-based composites is an effective method to enhance the electrochemical performance of LIB anodes. Using a small size of Si nanoparticles (SiNPs) is likely to avoid the cracking of this material. One critical issue is to disclose different types and electrochemical effects of various coupled materials in the Si-based composites for anode fabrication and optimization. Hence, this paper reviews diverse SiNP-based composites for advanced LIBs from the perspective of composition and electrochemical effects. Almost all kinds of materials that have been coupled with SiNPs for LIB applications are summarized, along with their electrochemical influences on the composites. The integrated materials, including carbon materials, metals, metal oxides, polymers, Si-based materials, transition metal nitrides, carbides, dichalcogenides, alloys, and metal-organic frameworks (MOFs), are comprehensively presented.

Towards Multi-Functional SiO2@YAG:Ce Core-Shell Optical Nanoparticles for Solid State Lighting Applications

This paper aims to investigate the synthesis, structure, and optical properties of SiO₂@YAG:Ce core-shell optical nanoparticles for solid state lighting applications. YAG:Ce phosphor is a key part in white light emitting diodes (LEDs), with its main functionality being the generation of yellow light. Generated yellow light from phosphor will be combined with blue light, emitted from chip, resulting in the generation of white light. Generated light in LEDs will often be scattered by SiO₂ nanoparticles. SiO₂ nanoparticles are often distributed within the optical window, aiming for a more homogeneous light output. The main idea in this research is to combine these functionalities in one core-shell particle, with its core being SiO₂ and its shell being phosphor. In this study core-shell nanoparticles with different Ce³⁺ concentrations were synthesized by a sol-gel method. Synthesized nanoparticles were characterized by X-ray diffraction (XRD), small angle X-ray scattering (SAXS) analysis, high resolution transmission electron macroscopy (HRTEM), Fourier transform infrared (FTIR), and photoluminescence spectroscopy. Luminescence characteristics of SiO₂@YAG:Ce core-shell particles were compared with that of SiO₂/YAG:Ce mixture composite, which is now used in commercial LEDs. Obtained results showed that core-shell nanoparticles have comparatively much better optical properties, compared to SiO₂/YAG:Ce mixture composite and can therefore be potentially used in LEDs.

Intelligent electrochromic-supercapacitor based on effective energy level matching poly(indole-6-carboxylicacid)/WO3 nanocomposites

A high-quality electrochromic-supercapacitor based on poly(indole-6-carboxylicacid)/WO₃ nanocomposites can intelligently monitor the energy storage state by changing the color of the device.

Carbon coated TiO2 nanoparticles prepared by pulsed laser ablation in liquid, gaseous and supercritical CO2

We report on the synthesis of TiO2 nanoparticles using nanosecond pulse laser ablation of titanium in liquid, gaseous and supercritical CO2. The produced particles were observed to be mainly anatase-TiO2 with some rutile-TiO2. In addition, the particles were covered by a carbon layer. Raman and x-ray diffraction data suggested that the rutile content increases with CO2 pressure. The nanoparticle size decreased and size distribution became narrower with the increase in CO2 pressure and temperature, however the variation trend was different for CO2 pressure compared to temperature. Pulsed laser ablation in pressurized CO2 is demonstrated as a single step method for making anatase-TiO2/carbon nanoparticles throughout the pressure and temperature ranges 5-40 MPa and 30 °C-50 °C, respectively.