Thiol-functionalized silica colloids, grains, and membranes for irreversible adsorption of metal(oxide) nanoparticles

Designing Nanoparticles and Nanoalloys for Gas-Phase Catalysis with Controlled Surface Reactivity Using Colloidal Synthesis and Atomic Layer Deposition

Supported nanoparticles are commonly applied in heterogeneous catalysis. The catalytic performance of these solid catalysts is, for a given support, dependent on the nanoparticle size, shape, and composition, thus necessitating synthesis techniques that allow for preparing these materials with fine control over those properties. Such control can be exploited to deconvolute their effects on the catalyst's performance, which is the basis for knowledge-driven catalyst design. In this regard, bottom-up synthesis procedures based on colloidal chemistry or atomic layer deposition (ALD) have proven successful in achieving the desired level of control for a variety of fundamental studies. This review aims to give an account of recent progress made in the two aforementioned synthesis techniques for the application of controlled catalytic materials in gas-phase catalysis. For each technique, the focus goes to mono- and bimetallic materials, as well as to recent efforts in enhancing their performance by embedding colloidal templates in porous oxide phases or by the deposition of oxide overlayers via ALD. As a recent extension to the latter, the concept of area-selective ALD for advanced atomic-scale catalyst design is discussed.

Concise, Single-Step Synthesis of Sulfur-Enriched Graphene: Immobilization of Molecular Clusters and Battery Applications

The concise synthesis of sulfur-enriched graphene for battery applications is reported. The direct treatment of graphene oxide (GO) with the commercially available Lawesson's reagent produced sulfur-enriched-reduced GO (S-rGO). Various techniques, such as X-ray photoelectron spectroscopy (XPS), confirmed the occurrence of both sulfur functionalization and GO reduction. Also fabricated was a nanohybrid material by using S-rGO with polyoxometalate (POM) as a cathode-active material for a rechargeable battery. Transmission electron microscopy (TEM) revealed that POM clusters were individually immobilized on the S-rGO surface. This battery, based on a POM/S-rGO complex, exhibited greater cycling stability for the charge-discharge process than a battery with nanohybrid materials positioned between the POM and nonenriched rGO. These results demonstrate that the use of sulfur-containing groups on a graphene surface can be extended to applications such as the catalysis of electrochemical reactions and electrodes in other battery systems.

Dye-doped silica nanoparticles: synthesis, surface chemistry and bioapplications

Background

Fluorescent silica nanoparticles have been extensively utilised in a broad range of biological applications and are facilitated by their predictable, well-understood, flexible chemistry and apparent biocompatibility. The ability to couple various siloxane precursors with fluorescent dyes and to be subsequently incorporated into silica nanoparticles has made it possible to engineer these fluorophores-doped nanomaterials to specific optical requirements in biological experimentation. Consequently, this class of nanomaterial has been used in applications across immunodiagnostics, drug delivery and human-trial bioimaging in cancer research.

Main body

This review summarises the state-of-the-art of the use of dye-doped silica nanoparticles in bioapplications and firstly accounts for the common nanoparticle synthesis methods, surface modification approaches and different bioconjugation strategies employed to generate biomolecule-coated nanoparticles. The use of dye-doped silica nanoparticles in immunoassays/biosensing, bioimaging and drug delivery is then provided and possible future directions in the field are highlighted. Other non-cancer-related applications involving silica nanoparticles are also briefly discussed. Importantly, the impact of how the protein corona has changed our understanding of NP interactions with biological systems is described, as well as demonstrations of its capacity to be favourably manipulated.

Conclusions

Dye-doped silica nanoparticles have found success in the immunodiagnostics domain and have also shown promise as bioimaging agents in human clinical trials. Their use in cancer delivery has been restricted to murine models, as has been the case for the vast majority of nanomaterials intended for cancer therapy. This is hampered by the need for more human-like disease models and the lack of standardisation towards assessing nanoparticle toxicity. However, developments in the manipulation of the protein corona have improved the understanding of fundamental bio–nano interactions, and will undoubtedly assist in the translation of silica nanoparticles for disease treatment to the clinic.

Extending Surface-Enhanced Raman Spectroscopy to Liquids Using Shell-Isolated Plasmonic Superstructures

Plasmonic superstructures (PS) based on Au/SiO₂ were prepared for Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) in liquid phase applications. These superstructures are composed of functionalized SiO₂ spheres with plasmonic Au nanoparticles (NPs) on their surface. Functionalization was performed with (3-aminopropyl)trimethoxysilane, (3-mercaptopropyl)trimethoxysilane and poly(ethylene-imine) (PEI). Of these three, PEI-functionalized spheres showed the highest adsorption density of Au NPs in TEM, UV/Vis and dynamic light scattering (DLS) experiments. Upon decreasing the Au NP/SiO₂ sphere size ratio, an increase in adsorption density was also observed. To optimize plasmonic activity, 61 nm Au NPs were adsorbed onto 900 nm SiO₂ -PEI spheres and these PS were coated with an ultrathin layer (1-2 nm) of SiO₂ to obtain Shell-Isolated Plasmonic Superstructures (SHIPS), preventing direct contact between Au NPs and the liquid medium. Zeta potential measurements, TEM and SHINERS showed that SiO₂ coating was successful. The detection limit for SHINERS using SHIPS and a 638 nm laser was around 10^-12  m of Rhodamine (10^-15  m for uncoated PS), all with acquisition settings suitable for catalysis applications.

Surface Functionalisation of Upconversion Nanoparticles with Different Moieties for Biomedical Applications

Lanthanide ion-doped upconversion nanoparticles (UCNPs) that can convert low-energy infrared photons into high-energy visible and ultraviolet photons, are becoming highly sought-after for advanced biomedical and biophotonics applications. Their unique luminescent properties enable UCNPs to be applied for diagnosis, including biolabeling, biosensing, bioimaging, and multiple imaging modality, as well as therapeutic treatments including photothermal and photodynamic therapy, bio-reductive chemotherapy and drug delivery. For the employment of the inorganic nanomaterials into biological environments, it is critical to bridge the gap in between nanoparticles and biomolecules via surface modifications and subsequent functionalisation. This work reviews the various ways to surface modify and functionalise UCNPs so as to impart different functional molecular groups to the UCNPs surfaces for a broad range of applications in biomedical areas. We discussed commonly used base functionalities, including carboxyl, amino and thiol moieties that are typically imparted to UCNP surfaces so as to provide further functional capacity.

Room temperature growth of ultrathin Au nanowires with high areal density over large areas by in situ functionalization of substrate

Although ultrathin Au nanowires (∼2 nm diameter) are expected to demonstrate several interesting properties, their extreme fragility has hampered their use in potential applications. One way to improve the stability is to grow them on substrates; however, there is no general method to grow these wires over large areas. The existing methods suffer from poor coverage and associated formation of larger nanoparticles on the substrate. Herein, we demonstrate a room temperature method for growth of these nanowires with high coverage over large areas by in situ functionalization of the substrate. Using control experiments, we demonstrate that an in situ functionalization of the substrate is the key step in controlling the areal density of the wires on the substrate. We show that this strategy works for a variety of substrates ranging like graphene, borosil glass, Kapton, and oxide supports. We present initial results on catalysis using the wires grown on alumina and silica beads and also extend the method to lithography-free device fabrication. This method is general and may be extended to grow ultrathin Au nanowires on a variety of substrates for other applications.

Controlling the nano-bio interface to build collagen-silica self-assembled networks

Bio-hybrid networks are designed based on the self-assembly of surface-engineered collagen-silica nanoparticles. Collagen triple helices can be confined on the surface of sulfonate-modified silica particles in a controlled manner. This gives rise to hybrid building blocks with well-defined diameters and surface potentials. Taking advantage of the self-assembling properties of collagen, collagen-silica networks are further built-up in solution. The structural and specific recognition properties of the collagen fibrils are well-preserved within the hybrid assembly. A combination of calorimetry, dynamic light scattering, zetametry and microscopy studies indicates that network formation occurs via a surface-mediated mechanism where pre-organization of the protein chains on the particle surface favors the fibrillogenesis process. These results enlighten the importance of the nano-bio interface on the formation and properties of self-assembled bionanocomposites.

Biochemical investigation of the formation of three-dimensional networks from DNA-grafted large silica particles

DNA is used to rationally build up networks of silica nanoparticles (SiNPs) based on the molecular recognition properties of complementary sequences. Network self-assembly is controlled from DNA covalently grafted at the surface of chemically modified SiNPs. Two strategies are compared, where grafted DNA sequences are designed in a three-strand system using noncomplementary sequences and an extra DNA linker, or in a two-strand approach for direct hybridization. In this paper, both systems are compared in terms of DNA hybridization stability, network size, and three-dimensional organization using a combination of dynamic light scattering and electron microscopy. The observed differences are discussed in terms of hybridization interactions between DNA sequences in particle-free systems through fluorescence, circular dichroism, and UV spectroscopy techniques.

Direct assembly of hydrophobic nanoparticles to multifunctional structures

We present a general process that allows convenient production of multifunctional composite particles by direct self-assembly of hydrophobic nanoparticles on host nanostructures containing high-density surface thiol groups. Hydrophobic nanoparticles of various compositions and combinations can be directly assembled onto the host surface through the strong coordination interactions between metal cations and thiol groups. The resulting structures can be further conveniently overcoated with a layer of normal silica to stabilize the assemblies and render them highly dispersible in water for biomedical applications. As the entire fabrication process does not involve complicated surface modification procedures, the hydrophobic ligands on the nanoparticles are not disturbed significantly so that they retain their original properties such as highly efficient luminescence. Many complex composite nanostructures with tailored functions can be efficiently produced by using this versatile approach. For example, multifunctional nonspherical nanostructures can be efficiently produced by using mercapto-silica coated nano-objects of arbitrary shapes as hosts for immobilizing functional nanoparticles. Multilayer structures can also be achieved by repeating the mercapto-silica coating and nanoparticle immobilization processes. Such assembly approach will provide the research community a highly versatile, configurable, scalable, and reproducible process for the preparation of various multifunctional structures.

Formation mechanism and size control in one-pot synthesis of mercapto-silica colloidal spheres

Mercapto-silica spheres with controllable size from ∼150 nm to ∼3.5 μm and narrow size distribution have been prepared in water using a one-pot synthesis, in which 3-mercaptopropyltrimethoxysilane (MPS) was used as the sole silica source and ammonia as the base catalyst. The hydrolysis of MPS at the early stage of the reaction produces amphiphilic silicate species which initiate the self-emulsification of the system and lead to the formation of oil-in-water emulsion droplets. Further hydrolysis and condensation promote the nucleation and growth of the mercapto-silica spheres inside the emulsion droplets. These mercapto-silica spheres are both structurally and functionally different from typical silica particles prepared from silicon alkoxides. Understanding the formation mechanism allows systematic tuning of the size of mercapto-silica spheres in a wide range by changing the amount of precursor, the concentration of ammonia, the amount of additional surfactants, and the reaction time. We find that Ostwald ripening may occur quickly if the spheres are kept in the reaction solution, resulting in significant broadening of the particle size distribution. In order to obtain uniform and stable samples, it is important to quench the growth of the mercapto-silica spheres by separating them from the original reaction mixture and then storing them in solvents that can prevent further ripening.

Enhanced visible light photocatalysis through fast crystallization of zinc oxide nanorods

Hydrothermally grown ZnO nanorods have inherent crystalline defects primarily due to oxygen vacancies that enhance optical absorption in the visible spectrum, opening up possibilities for visible light photocatalysis. Comparison of photocatalytic activity of ZnO nanorods and nanoparticle films on a test contaminant methylene blue with visible light irradiation at 72 kilolux (klx) showed that ZnO nanorods are 12-24% more active than ZnO nanoparticulate films. This can be directly attributed to the increased effective surface area for adsorption of target contaminant molecules. Defects, in the form of interstitials and vacancies, were intentionally created by faster growth of the nanorods by microwave activation. Visible light photocatalytic activity was observed to improve by ≈8% attributed to the availability of more electron deficient sites on the nanorod surfaces. Engineered defect creation in nanostructured photocatalysts could be an attractive solution for visible light photocatalysis.

Solid phase adsorption of crystal violet lactone on silica nanoparticles to probe mechanochemical surface modification

The solid phase adsorption of crystal violet lactone (CVL) on five types of Stober silica nanopowders with BET specific surface areas in the range of 50-800 m2/g under dry milling conditions was described for the first time. The hydrogen bonding between surface silanol and the carboxylate of the ring-opened triphenylmethane dye (CVL+) led to the formation of monolayers of CVL+ in a flat-laid configuration. The lambda max of CVL+ in diffusive reflection visible spectra was influenced by the particle size of silica powders, suggesting that the microenvironmental polarity of adsorbed CVL+ is considerably reduced along with the decrease of the particle size. The solid phase adsorption of CVL obeyed Langmuir adsorption isotherms to give a saturated amount of CVL+ for every silica nanoparticle. The surface concentration of CVL+ on nanoparticles at the saturation was estimated to be 0.31 mg/m2 on average, disclosing that about 52% of the surface can be covered by CVL+ under the assumption that the BET-specific surface areas are equivalent to the real surfaces active for the CVL adsorption. The generation of the blue color of CVL provided a convenient means to estimate qualitative and quantitative analysis of the surface coverage with surface-active reagents, which conceal surface silanols. Subsequently, silica nanoparticles were milled with a surface modifier, followed by milling with CVL to observe the intensity of the blue color in order to disclose that the surface coverage with oligo- and polyethylene glycols as well as with nonionic surfactants by dry milling was specifically determined by the number of repeating oxyethylene units. Although the surface-active reagents were easily desorbed in water, the desorption was notably suppressed by milling with CVL, suggesting that the surface-modified particles with the surface-active reagents are covered with ultrathin films of CVL.

Growth of ZnO nanowires on nonwoven polyethylene fibers

We report the growth of ZnO nanowires on nonwoven polyethylene fibers using a simple hydrothermal method at a temperature below the boiling point of water. The ZnO nanowires were grown from seed ZnO nanoparticles affixed onto the fibers. The seed ZnO nanoparticles, with diameters of about 6-7 nm, were synthesized in isopropanol by reducing zinc acetate hydrate with sodium hydroxide. The growth process was carried out in a sealed chemical bath containing an equimolar solution of zinc nitrate hexahydrate and hexamethylene tetramine at a temperature of 95 °C over a period of up to 20 h. The thickness and length of the nanowires can be controlled by using different concentrations of the starting reactants and growth durations. A 0.5 mM chemical bath yielded nanowires with an average diameter of around 50 nm, while a 25 mM bath resulted in wires with a thickness of up to about 1 μm. The length of the wires depends both on the concentration of the precursor solution as well as the growth duration, and in 20 h, nanowires as long as 10 μm can be grown. The nonwoven mesh of polyethylene fibers covered with ZnO nanowires can be used for novel applications such as water treatment by degrading pollutants by photocatalysis. Photocatalysis tests carried out on standard test contaminants revealed that the polyethylene fibers with ZnO nanowires grown on them could accelerate the photocatalytic degradation process by a factor of 3.

Unfolding of ribonuclease A on silica nanoparticle surfaces

This paper reports on the unfolding behavior of ribonuclease A (RNase A) on silica nanoparticle surfaces and quantitively demonstrates that nanoscale size and surface curvature play key roles in influencing the stability of adsorbed proteins. Urea denaturation analyses showed that the thermodynamic stability of RNase A decreased upon adsorption onto the nanoparticles, with greater decrease on larger nanoparticles. The stability changes of RNase A correlate well with the changes in the protein-nanoparticle interactions, which increase as the surface contact area and surface charge interaction increases. This study, therefore, provides fundamental information on the effect of nanoscale surfaces on protein structure and function.