Controllable disintegration of temperature-responsive self-assembled multilayer film based on polybetaine

Colloidal assembly of polydisperse particle blends during drying

In this work, we synthesize a polydisperse aqueous colloidal system composed of small and large zwitterionic particles, as well as medium sized standard acrylic particles. By assembling these dispersions into films by drying, we show using atomic force microscopy (AFM) how their top surfaces can be mostly covered by zwitterionic groups for a wide range of evaporation rates. We probe underneath the top film surface using Fourier-transform infrared (FTIR) spectroscopy - attenuated total reflection (ATR), observing that the content in zwitterionic particles of the film upper layer increases for faster evaporation rates. We show how polydisperse systems hold great potential to overcome the evaporation rate dependence of size segregation processes in drying colloidal blends, and we provide further insights into the assembly mechanisms involved. Polydisperse blends enhance the robustness of such processes for application in coatings and other soft products where evaporation rate can not be tuned.

Biologically Functional Ultrathin Films Made of Zwitterionic Block Copolymer Micelles

We report the preparation of ultrathin coatings of zwitterionic block copolymer micelles and a comparison of their protein adsorption, adhesiveness, and antibacterial properties. Zwitterionic block copolymer micelles were obtained through pH-induced self-assembly of poly[3-dimethyl(methacryloyloxyethyl)ammonium propanesulfonate- b-2-(diisopropylamino)ethyl methacrylate] (βPDMA- b-PDPA) at pH 7.5. βPDMA- b-PDPA micelles with zwitterionic βPDMA-corona and pH-responsive PDPA-core were then used as building blocks to prepare layer-by-layer (LbL) assembled multilayer films together with hyaluronic acid (HA), tannic acid (TA), or poly(sodium 4-styrenesulfonate) (PSS). Protein adsorption tests showed that 3-layer βPDMA- b-PDPA micelles/HA films were the most effective to reduce the adhesion of BSA, lysozyme, ferritin, and casein. In contrast, βPDMA- b-PDPA micelles/TA films were the most attractive surfaces for protein adsorption. Bacterial antiadhesive tests against a model Gram-negative bacterium, Escherichia coli, and a model Gram-positive bacterium, Staphylococcus aureus, were in good agreement with the protein adsorption properties of the films. The differences in the antiadhesive properties between these three different film systems are discussed within the context of chemical nature and the functional chemical groups of the polyanions, layer number, and surface morphology of the films. Multilayers were found to lose their antiadhesiveness in the long term. However, by taking advantage of the pH-responsive hydrophobic micellar cores, we show that an antibacterial agent could be loaded into the micelles and multilayers could exhibit antibacterial activity in the long term especially at moderately acidic conditions. In contrast to antiadhesive properties, no significant differences were recorded in the antibacterial properties between the different film types.

Preparation of Vascular Endothelial Cadherin Loaded-Amphoteric Copolymer Decorated Coronary Stents for Anticoagulation and Endothelialization

A new strategy for preparation of blood-contact materials, with their short-term anticoagulation depending on zwitterionic structure and long-term hemocompatibility based on endothelialization, was proposed, performed, and proved. The copolymer made of sulfonamide zwitterionic and acrylic acid was designed and synthesized, and grafted to the surface of the bare metal coronary stent. Then, the vascular endothelial cadherin (VE-Cad), one of the specific antibodies of endothelial progenitor cells (EPCs), was fixed onto the copolymer chain. Finally, it is proved by in vitro blood tests that the coronary stent decorated with VE-Cad loaded-amphoteric copolymer displayed good platelet anti-adhesion characteristic. This anti-adhesion characteristic was attributed to the zwitterionic structure and the biofunctionality of specifically capturing EPCs confirmed by the results that the antibody-decorated coronary stent was trapped with EPCs. Finally, the in vivo implantation experiments of the antibody-decorated coronary stent in rabbit for 4 weeks were carried out. Results indicated that the endothelium and smooth surface of the antibody-loaded stent was found to be due to the covered effect of EPCs, without obvious intimal hyperplasia. The strategy we proposed has great potential in the design and preparation of blood-contact biomedical materials and devices.

Highly Stable, Protein-Resistant Surfaces via the Layer-by-Layer Assembly of Poly(sulfobetaine methacrylate) and Tannic Acid

Zwitterionic materials have received great attention because of the non-fouling property. As a result of the electric neutrality of zwitterionic polymers, their layer-by-layer (LBL) assembly is generally conducted under specific conditions, such as very low pH values or ionic strength. The formed multilayers are unstable at high pH or in a high ionic strength environment. Therefore, the formation of highly stable multilayers of zwitterionic polymers via the LBL assembly process is still challenging. Here, we report the LBL assembly of poly(sulfobetaine methacrylate) (PSBMA) with a polyphenol, tannic acid (TA), for protein-resistant surfaces. The assembly process was monitored by a quartz crystal microbalance (QCM) and variable-angle spectroscopic ellipsometry (VASE), which confirms the formation of thin multilayer films. We found that the (TA/PSBMA)n multilayers are stable over a wide pH range of 4-10 and in saline, such as 1 M NaCl or urea solution. The surface morphology and chemical composition were characterized by specular reflectance Fourier transform infrared spectroscopy (FTIR/SR), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). Furthermore, (TA/PSBMA)n multilayers show high hydrophilicity, with a water contact angle lower than 15°. A QCM was used to record the dynamic protein adsorption process. Adsorption amounts of bovine serum albumin (BSA), lysozyme (Lys), and hemoglobin (Hgb) on (TA/PSBMA)20 multilayers decreased to 0.42, 52.9, and 37.9 ng/cm(2) from 328, 357, and 509 ng/cm(2) on a bare gold chip surface, respectively. In addition, the protein-resistance property depends upon the outmost layer. This work provides new insights into the LBL assembly of zwitterionic polymers.

Building polyzwitterion-based multilayers for responsive membranes

We systematically investigate the assembly of multilayers based on a polyzwitterion (PSBMA) and a polycation (PDADMAC) for the development of ionic strength responsive membranes. Although the polyzwitterion is essentially charge neutral, we show that specific electrostatic interactions with the PDADMAC allow for the formation of stable multilayers. The growth of this LbL system is monitored on model surfaces (silica) via optical reflectometry for different pH values and ionic strengths. While no effect of pH on the layer growth is observed, we did observe a strong dependence on the ionic strength. Upon increasing the ionic strength during deposition from 0.005 to 0.5 M NaCl, the adsorbed amount is significantly decreased, a behavior that is opposite to classical LbL systems. Similar results to those obtained on silica are also observed on top of classical LbL systems and on polymeric membranes. This demonstrates that the growth of the polyzwitterion multilayers is independent of the substrate. Coating these polyzwitterion multilayers on hollow fiber membranes via dip-coating yields membranes that are stimuli responsive toward the ionic strength of the filtration solution, with an increase in permeability of up to 108% from 0 to 1.5 M NaCl. We show that the fabrication of the polyzwitterion multilayers is an easy and controlled way to provide surfaces, such as membranes, with the specific functionalities of polyzwitterions.

Use of Amphoteric Copolymer Films as Sacrificial Layers for Constructing Free-Standing Layer-by-Layer Films

The present paper reports the use of an amphoteric copolymer, poly(diallylamine-co-maleic acid) (PDAMA), as a component of precursor layers (or sacrificial layers) for constructing free-standing layer-by-layer (LbL) films. A PDAMA-poly(styrenesulfonate) (PSS) film or PDAMA-poly(dimethyldiallylammonium chloride) (PDDA) film was coated on the surface of a quartz slide at pH 4.0 or 8.0, respectively, as a sacrificial layer that can be removed by changing the pH. The surface of the sacrificial layer was further covered with LbL films composed of poly(allylamine hydrochloride) (PAH) and PSS. The PAH-PSS films were released from the substrate upon immersing the film-coated quartz slide in acidic or neutral/basic solution, respectively, as a result of the pH-induced dissolution of the PDAMA-PDDA or PDAMA-PSS sacrificial layer. Thus, PDAMA-based sacrificial layers have been demonstrated to dissolve in both acidic and neutral solutions, depending on the type of counter polymer. The thicknesses of the sacrificial layers and released LbL films are crucial factors for constructing free-standing LbL films. The releasing kinetics also depended on the thickness of the crucial layers. The free-standing PAH-PSS films obtained were stable in water or in air in the dry state. PDAMA-based sacrificial layers may be useful in constructing free-standing LbL films containing biomolecules with limited pH stability.