Effect of [CTAB]–[SiO2] ratio on the formation and stability of hexadecane/water emulsions in the presence of NaCl

Covalent Bond Interfacial Recognition of Polysaccharides/Silica Reinforced High Internal Phase Pickering Emulsions for 3D Printing

Significant challenges remain in designing sufficient viscoelasticity polysaccharide-based high internal phase Pickering emulsions (HIPPEs) as soft materials for 3D printing. Herein, taking advantage of the interfacial covalent bond interaction between modified alginate (Ugi-OA) dissolved in the aqueous phase and aminated silica nanoparticles (ASNs) dispersed in oil, HIPPEs with printability were obtained. Using multitechniques coupling a conventional rheometer with a quartz crystal microbalance with dissipation monitoring, the correlation between interfacial recognition coassembly on the molecular scale and the stability of whole bulk HIPPEs on the macroscopic scale can be clarified. The results showed that Ugi-OA/ASNs assemblies (NPSs) were strongly retargeted into the oil-water interface due to the specific Schiff base-binding between ASNs and Ugi-OA, further forming thicker and more rigid interfacial films on the microscopic scale compared with that of the Ugi-OA/SNs (bared silica nanoparticles) system. Meanwhile, flexible polysaccharides also formed a 3D network that suppressed the motion of the droplets and particles in the continuous phase, endowing the emulsion with appropriately viscoelasticity to manufacture a sophisticated "snowflake" architecture. In addition, this study opens a novel pathway for the construction of structured all-liquid systems by introducing an interfacial covalent recognition-mediated coassembly strategy, showing promising applications.

3D core-shell Fe3O4@SiO2@MoS2 composites with enhanced microwave absorption performance

In this work, a 3D ternary core-shell Fe₃O₄@SiO₂@MoS₂ composite is synthesized by a hydrothermal technique and a modified Stöber method, where magnetic Fe₃O₄@SiO₂ microsphere with the core of raspberry-like Fe₃O₄ nanoparticles is completely coated by the flower-like MoS₂. Herein, the electromagnetic parameters of the composites are effectively tuned by the combination of magnetic Fe₃O₄ with dielectric SiO₂ and MoS₂. The obtained ternary composites exhibit remarkable enhancement of microwave absorption. The measurement results indicate that the minimum reflection loss (RL) of Fe₃O₄@SiO₂@MoS₂ composites reaches -62.98 dB at 1.83 mm with the effective absorption bandwidth (RL < -10 dB) of 5.76 GHz (from 11.28 to 17.04 GHz) at 1.92 mm, much higher than those of pure Fe₃O₄ particles and Fe₃O₄@SiO₂ microsphere. It is believed that the improved performances come from the specific structural design and the plentiful interfacial construction. Further, the synergistic effect of the dielectric and magnetic loss as well as the promoted impedance matching also help to enhance the microwave absorption of the composites. The microwave absorption behavior of the composites conforms to the quarter-wavelength cancellation theory. Our study offers an effective and promising strategy in the structural design and interfacial construction of the novel magnetic/dielectric composites with high-efficiency microwave absorption.

Effect of cetyltrimethyl-ammonium bromide on the properties of hydroxyapatite nanoparticles stabilized Pickering emulsion and its cured poly(L-lactic acid) materials

Hydroxyapatite (HAp) nanoparticles stabilized Pickering emulsions were prepared by dichloromethane (CH₂ Cl₂ ) dissolved poly(L-lactic acid) (PLLA) as the oil phase and the deionized water with different concentrations of cetyltrimethyl-ammonium bromide (CTAB) as the aqueous phase. Effect of CTAB concentration on emulsions type and stability were studied. The emulsion type underwent a two-phase inversion, and emulsion stability increased first and then decreased with increasing CTAB concentrations. Besides, effect of CTAB concentration on zeta potential, aggregate size, contact angle of HAp nanoparticles and the oil-water interfacial tension were studied. The results indicated that zeta potential value of HAp nanoparticles changed from negative to positive, and the contact angle increased to over 80° initially and then decreased to below 40° rapidly. The distribution of HAp nanoparticles on the surface of emulsion droplets with different concentrations of CTAB (5 and 20 mM) was characterized using laser-induced confocal microscope. It revealed the distribution of HAp nanoparticles changed with different CTAB concentrations. The cured PLLA materials were obtained after the solvent being volatilized using as-received emulsions as templates. Scanning electron microscope images showed both microspheres and porous materials with interconnected pore structure were obtained. In conclusion, the microstructure of microspheres or porous PLLA materials is controllable by adjusting the property of HAp nanoparticles stabilized Pickering emulsions with appropriate amount of CTAB.

Size-dependent adsorption and its application in determining the number of surfactant molecule adsorbed on multimodal SiO2 particles by 2D-DCS

One and two-layered adsorption of CTAB molecules onto silica NPs with multi-modal dispersion is quantitatively determined by 2D-DCS.