Preparation and characterization of chitosan/sodium alginate (CSA) microcapsule containing Cortex Moutan

Fabrication of thermo-responsive multicore microcapsules using a facile extrusion process

A process employing extrusion was used to produce multicore microcapsules composed of multiple beads. The inner beads were made from κ-carrageenan (κ-c), a thermo-responsive linear sulphated polymer whose gelling temperature ranges at 40-60 °C, depending on the concentration of κ-c polymer and the amount of potassium chloride used for gelation. The resulting beads were then enveloped by chitosan through gelation with sodium triphosphate. The pesticide ammonium glufosinate was encapsulated in the κ-c/chitosan multicore microcapsules for demonstration of controlled release of the encapsulant. It was found that in response to an external stimulus, such as elevated temperature or solar simulation, the microcapsules exhibit the gradual release of encapsulated pesticide molecules from multicore microcapsules, compared with beads only. This process of making multicore microcapsules can be extended to other polymer pairs based on applications. This work is relevant to agriculture, where the controlled-release of the pesticides or fertilizers could be triggered by the sun and/or temperature changes, thus extending the residual period of the chemicals as well as decreasing the extent of pollution by leaching of abundant chemicals.

Enhanced antifouling and antibacterial performances of novel UV-curable polysiloxane/microcapsules/Ag composite coatings for marine applications

Marine biological fouling is a widespread phenomenon encountered by various oceanic ships and naval vessels, resulting in enormous economic losses. Herein, novel 4,5-dichloro-2-octyl-isothiazolone@sodium alginate/chitosan microcapsules (DCOIT@ALG/CS) were prepared through composite gel method using DCOIT as core materials, ALG and CS as shells, and CaCl2 as the cross-linking agent. The formed microcapsules (MCs) with Ag nanoparticles (AgNPs) were then filled in UV-curable polysiloxane (UV-PDMS), followed by UV irradiation to yield UV-PDMS/microcapsules/AgNPs (UV-PDMS/MCs/Ag) composite coatings. The constructed micro-nano dual-scale surface using the MCs and AgNPs improved the antifouling and antibacterial properties of UV-PDMS/MCs/Ag coatings. The as-obtained UV-PDMS/MCs/Ag coatings exhibited a static contact angle of about 160°, shear strength of 2.24 MPa, tensile strength of 3.32 MPa and elongation at break of 212%. The synergistic bacteriostatic effects of DCOIT and AgNPs in UV-PDMS/MCs/Ag coatings resulted in a bactericidal rate of 200 μg ml-1 towards Escherichia coli and Staphylococcus aureus with saturation at 100% within 10 min. In sum, the proposed composite coatings look promising for future marine transportation, pipeline networks and undersea facilities.

Co-encapsulation of Shirazi thyme (Zataria multiflora) essential oil and nisin using caffeic acid grafted chitosan nanogel and the effect of this nanogel as a bio-preservative in Iranian white cheese

The current study aims to co-encapsulate Shirazi thyme (Zataria multiflora) essential oil (ZEO) and nisin into chitosan nanogel as an antimicrobial and antioxidant agent to enhance the shelf-life of cheese. Chitosan-caffeic acid (CS-CA) nanogel was produced to co-encapsulate Zataria multiflora essential oil and nisin. This nanogel was characterized by dynamic light scattering (DLS), Fourier Transform Infrared (FTIR) spectroscopic analysis, X-ray diffraction (XRD) analysis, and scanning electron microscopy (SEM) images. The effect of free (TFZN) and encapsulated ZEO-nisin in chitosan nanogel (TCZN) on the chemical and microbiological properties of Iranian white cheese was assessed. The particle size, polydispersity index value (PDI), zeta potential, antioxidant activity, and encapsulation efficiency of the optimal chitosan-ZEO-nisin nanogel were 421.6 nm, 0.343, 34.0 mV, 71.06%-82.69%, and 41.3 ± 0.5%, 0.79 ± 0.06 mg/mL. respectively. FTIR and XRD approved ZEO and nisin entrapment within chitosan nanogel. The chitosan nanogel showed a highly porous surface with an irregular shape. The bioactive compounds of ZEO and nisin decreased the pH changes in cheese. On the 60th day of storage, the acidity of treated samples was significantly lower than that of control. Although the lowest anisidine index value was observed in samples treated with sodium nitrate (NaNO3) (TS), there was no significant difference between this sample and TCZN. The lowest microbial population was observed in TCZN and TS. After 60 days of ripening, Coliforms were not detected in the culture medium of TCZN and TS. The results can contribute to the development of a natural preservative with the potential for application in the dairy industry.

Chitosan-based drug delivery systems for skin atopic dermatitis: recent advancements and patent trends

Atopic dermatitis (AD) is a complex, relapsing inflammatory skin disease with a considerable social and economic burden globally. AD is primarily characterized by its chronic pattern and it can have important modifications in the quality of life of the patients and caretakers. One of the fastest-growing topics in translational medicine today is the exploration of new or repurposed functional biomaterials into drug delivery therapeutic applications. This area has gained a considerable amount of research which produced many innovative drug delivery systems for inflammatory skin diseases like AD. Chitosan, a polysaccharide, has attracted attention as a functional biopolymer for diverse applications, especially in pharmaceutics and medicine, and has been considered a promising candidate for AD treatment due to its antimicrobial, antioxidative, and inflammatory response modulation properties. The current pharmacological treatment for AD involves prescribing topical corticosteroid and calcineurin inhibitors. However, the adverse reactions associated with the long-term usage of these drugs such as itching, burning, or stinging sensation are also well documented. Innovative formulation strategies, including the use of micro- and nanoparticulate systems, biopolymer hydrogel composites, nanofibers, and textile fabrication are being extensively researched with an aim to produce a safe and effective delivery system for AD treatment with minimal side effects. This review outlines the recent development of various chitosan-based drug delivery systems for the treatment of AD published in the past 10 years (2012-2022). These chitosan-based delivery systems include hydrogels, films, micro-, and nanoparticulate systems as well as chitosan textile. The global patent trends on chitosan-based formulations for the AD are also discussed.

Extraction kinetic model of polysaccharide from Codonopsis pilosula and the application of polysaccharide in wound healing

The crude polysaccharide (CPNP) of Codonopsis pilosula was obtained by hot-water extraction technology. The extraction kinetic model established according to Fick's first law of diffusion and related parameters of polysaccharide was studied. CPNP microcapsules were prepared by blending with sodium alginate, Ca2+ ions and crude CPNP. The quality control (Drug loading rate, embedding rate and release rate, etc) of CPNP microcapsules were analyzed by pharmacopeas standards. The structure feature of CPNP microcapsules also were determined with various methods. The wound healing ability of CPNP microcapsules loading with different concentration of CPNP was evaluated using the rat wound model. The activity of various enzymes and the expression levels of pro-inflammatory factors in the model skin tissue also were determined by enzyme linked immunosorbent assay (ELISA). Hematoxylin-eosin staining (HE), Masson, immunohistochemistry were used to investigate the external application effect of CPNP microcapsules on skin wound repair. The extraction kinetics of CPNP was established with the linear correlation coefficient (R2) of 0.83-0.93, implied that the extraction process was fitted well with the Fick's first law of diffusion. The CPNP has good compatibility with sodium alginate and Ca2+ ions by SEM and TEM observation, and the particle size of CPNP microcapsules was 21.25±2.84 μm with the good degradation rate, loading rate (61.59%) and encapsulation rate (55.99%), maximum swelling rate (397.380 ±25.321%). Compared with control group, the redness, and swelling, bleeding, infection, and exudate of the damaged skin decreased significantly after CPNP microcapsules treatment, and the CPNP microcapsules groups exhibited good wound healing function with less inflammatory cell infiltration. The pathological structure showed that in the CPNP microcapsules group, more newborn capillaries, complete skin structure, and relatively tight and orderly arrangement of collagen fibers were observed in the skin of rats. CPNP microcapsules could effectively inhibit the high expression of pro-inflammatory factors in damaged skin, and significantly increase the contents of related enzymes (GSH-Px, T-AOC, LPO) and collagen fibers. The relative expression levels of genes (VEGF and miRNA21) in the CPNP microcapsules group were higher than those in the model group and the negative group. The above results suggested that the CPNP microcapsules could controlled-release the CPNP to the wound surface, and then played a better role in antibacterial, anti-inflammatory and skin wound repair.

Preparation, characterization and wound healing effect of alginate/chitosan microcapsules loaded with polysaccharides from Nostoc Commune Vaucher

Biologically active coating materials could promote the growth of granulation tissue as auxiliary materials, while natural polysaccharides could promote vascular regeneration and wound healing. Therefore, in this study, ultrasound-assisted extract of Nostoc commune Vaucher polysaccharides (UAP) yield after the process optimization was 12.89 ± 0.24%, which was used to prepare microcapsules by emulsification and cross-linking. The effect of alginate/chitosan-UAP composite materials on wound healing in an experimental rat model for 14 d and its physical properties were evaluated. In vitro experiments indicated that the UAP microcapsule material had a porous and loose three-dimensional network structure, and had good biocompatibility and swelling properties as a wound healing material. Animal experiments indicated that UAP microcapsules could extremely significantly promote wound healing (P < 0.01), and wound closure rate reached 79.16 ± 3.91% on 14th day. Meanwhile UAP microcapsules might promote angiogenesis and granulation growth by enhancing immunity and increasing the expression of VEGF and miR-21. Therefore, the composites of UAP microcapsules have shown encouraging results as a potential dressing for wound healing.

Effective passivation of lead by phosphate solubilizing bacteria capsules containing tricalcium phosphate

Phosphate solubilizing bacteria (PSBs) shows high potential to be used for lead passivation in sediments due to the abilities of releasing phosphate and the subsequent formation of insoluble Pb-phosphate compounds. In this research, microbial capsules implemented with sodium alginate and CaCl₂, containing Leclercia adecarboxylata L15 (a lead resistant PSB) and Ca₃(PO₄)₂, were developed and the performance on lead passivation under different conditions was examined. The optimal concentrations of sodium alginate and CaCl₂ for formulating the capsules were determined to be 0.3% and 10%, respectively. The removal efficiency of Pb²⁺ by capsules containing L15 and Ca₃(PO₄)₂ was up to 98% with a capsule dosage of 2%, initial Pb²⁺ concentration of 1mM and pH of 3.0, which was better than that of free L15 (18%) and capsules containing only L15 (34%). Lead was immobilized via the formation of Pb₅(PO₄)₃Cl on the surface and Pb₃(PO₄)₂ in the interior of the capsules. The simulated sediment remediation experiments showed that the acid soluble fraction of lead reduced from 28% to 14% and transformed into more stable fractions after 10 days. The experiment results indicated that PSBs capsules coupled with phosphate materials have a great promise for application in remediation of lead contaminated sediments.

Micro-Polluted Surface Water Treated by Yeast-Chitosan Bio-Microcapsules

Ammonia nitrogen and natural organic matter (NOM) seriously degrade the quality of surface waters. In this study, the optimum preparation conditions of a yeast-chitosan bio-microcapsule of the Candida tropicalis strain, used to treat micro-polluted surface water, were investigated. Fourier transform infrared spectroscopy and scanning electron microscopy were used to characterize the bio-microcapsules. A continuous laboratory-scale reaction apparatus was built to evaluate the engineering applications of the bio-microcapsules and their treatment efficiency for major pollutants in micro-polluted raw water. The yeast-chitosan bio-microcapsules were found to rapidly and effectively remove suspended solids and ammonia nitrogen. Moreover, the bio-microcapsule pre-treatment process was capable of resisting impact loads and fluctuations in water quality. Even at low temperatures (12 °C), the removal rate of ammonia nitrogen still reached 79%. The treatment did not lead to a temporary increase in nitrite concentration, nor to the excessive accumulation of nitrogen. The application of bio-microcapsules is simple; it only requires aeration and certain nutrient substrates, and can be adapted to treat raw drinking water with a poor nutrient substrate, therefore showing promise for future use in engineering applications.

Novel Controlled Release Microspheric Soil Conditioner Based on the Temperature and pH Dual-Stimuli Response

A novel type of temperature and pH dual-stimuli-responsive microspheric soil conditioner was prepared for the controlled release of urea. First, poly(N-isopropylacrylamide-co-methacrylic acid) [P(NIPAM-co-MAA)] was synthesized, and the microspheric soil conditioner was prepared on the basis of chitosan-coated P(NIPAM-co-MAA) via the emulsion cross-linking method. The structure and morphology of the microsphere were characterized by Fourier transform infrared spectroscopy, hydrogen nuclear magnetic resonance, polarization optical microscopy, and scanning electron microscopy. The microsphere showed controlled release behavior in different temperature and pH conditions, indicating good stimuli responsiveness. The plant experiment revealed that the microsphere can effectively promote plant growth in acidified soil and high-temperature conditions, and the pH value of acidified soil could be improved. In addition, the microsphere possessed good biodegradation property in the soil. Therefore, the multi-responsive microspheric soil conditioner owns a great potential value to amend soil conditions and promote plant growth in agriculture applications.

Bio-Functional Textiles: Combining Pharmaceutical Nanocarriers with Fibrous Materials for Innovative Dermatological Therapies

In the field of pharmaceutical technology, significant attention has been paid on exploiting skin as a drug administration route. Considering the structural and chemical complexity of the skin barrier, many research works focused on developing an innovative way to enhance skin drug permeation. In this context, a new class of materials called bio-functional textiles has been developed. Such materials consist of the combination of advanced pharmaceutical carriers with textile materials. Therefore, they own the possibility of providing a wearable platform for continuous and controlled drug release. Notwithstanding the great potential of these materials, their large-scale application still faces some challenges. The present review provides a state-of-the-art perspective on the bio-functional textile technology analyzing the several issues involved. Firstly, the skin physiology, together with the dermatological delivery strategy, is keenly described in order to provide an overview of the problems tackled by bio-functional textiles technology. Secondly, an overview of the main dermatological nanocarriers is provided; thereafter the application of these nanomaterial to textiles is presented. Finally, the bio-functional textile technology is framed in the context of the different dermatological administration strategies; a comparative analysis that also considers how pharmaceutical regulation is conducted.

Fabrication of Quaternized Chitosan Nanoparticles Using Tripolyphosphate/Genipin Dual Cross-Linkers as a Protein Delivery System

Various amounts of 2-((acryloyloxy)ethyl)trimethylammonium chloride were grafted onto chitosan (CS) via redox polymerization method to obtain water-soluble quaternized CS (QCS). The QCS nanoparticles loaded with bovine serum albumin (BSA) were then produced by ionic gelation with tripolyphosphate (TPP) and further covalently cross-linked with genipin. The formation of QCS nanoparticles was optimized as a function of monomer grafting yield, QCS/TPP weight ratio, and QCS/genipin weight ratio by Box-Behnken design and response surface methodology. The results showed that QCS nanoparticles prepared with a grafting yield of 50%, QCS/TPP weight ratio of 7.67, and QCS/genipin weight ratio of 60 had a particle size of 193.68 ± 44.92 nm, polydispersity of 0.232, zeta potential of +23.97 mV and BSA encapsulation efficiency of 46.37 ± 2.89%, which were close to the predicted values from mathematical models. In vitro drug release studies at pH 1.2 and pH 7.4 exhibited that the release rate of BSA was significantly decreased and the release period was significantly prolonged after QCS nanoparticles cross-linking with genipin. Therefore, QCS nanoparticles cross-linked with TPP/genipin dual cross-linkers may be a promising protein drug carrier for a prolonged and sustained delivery.

Thermoresponsive Hydrogels and Their Biomedical Applications: Special Insight into Their Applications in Textile Based Transdermal Therapy

Various natural and synthetic polymers are capable of showing thermoresponsive properties and their hydrogels are finding a wide range of biomedical applications including drug delivery, tissue engineering and wound healing. Thermoresponsive hydrogels use temperature as external stimulus to show sol-gel transition and most of the thermoresponsive polymers can form hydrogels around body temperature. The availability of natural thermoresponsive polymers and multiple preparation methods of synthetic polymers, simple preparation method and high functionality of thermoresponsive hydrogels offer many advantages for developing drug delivery systems based on thermoresponsive hydrogels. In textile field applications of thermoresponsive hydrogels, textile based transdermal therapy is currently being applied using drug loaded thermoresponsive hydrogels. The current review focuses on the preparation, physico-chemical properties and various biomedical applications of thermoresponsive hydrogels based on natural and synthetic polymers and especially, their applications in developing functionalized textiles for transdermal therapies. Finally, future prospects of dual responsive (pH/temperature) hydrogels made by these polymers for textile based transdermal treatments are mentioned in this review.

Functionalized Textile Based Therapy for the Treatment of Atopic Dermatitis

Atopic dermatitis (AD) is a common chronic inflammatory skin condition characterized by intense puritus and skin dryness. The pathogenesis for AD has not been fully understood to date. Complementary therapies are very popular as effective treatment for AD among clinical practitioners. This study presents a comprehensive review of published works associated with textiles-based complementary therapies for AD treatment such as wet-wrap dressing, functionalized textiles, and the application of hydrogel techniques in the textile industry to provide a better understanding of the development and design of new textiles-based transdermal therapies.

Dual-functional transdermal drug delivery system with controllable drug loading based on thermosensitive poloxamer hydrogel for atopic dermatitis treatment

The treatment of atopic dermatitis (AD) has long been viewed as a problematic issue by the medical profession. Although a wide variety of complementary therapies have been introduced, they fail to combine the skin moisturizing and drug supply for AD patients. This study reports the development of a thermo-sensitive Poloxamer 407/Carboxymethyl cellulose sodium (P407/CMCs) composite hydrogel formulation with twin functions of moisture and drug supply for AD treatment. It was found that the presence of CMCs can appreciably improve the physical properties of P407 hydrogel, which makes it more suitable for tailored drug loading. The fabricated P407/CMCs composite hydrogel was also characterized in terms of surface morphology by field emission scanning electron microscopy (FE-SEM), rheological properties by a rheometer, release profile in vitro by dialysis method and cytotoxicity test. More importantly, the findings from transdermal drug delivery behavior revealed that P407/CMCs showed desirable percutaneous performance. Additionally, analysis of cytotoxicity test suggested that P407/CMCs composite hydrogel is a high-security therapy for clinical trials and thus exhibits a promising way to treat AD with skin moisturizing and medication.

Preparation of ALG-g-Lys and its application as a novel drug carrier

In order to improve alginate microbead stability and further broaden the application of alginate in biomaterials, a new biomaterial, ALG-g-Lys, was prepared and its possibility as a novel drug carrier investigated.