Multifunctional satellite Fe3O4-Au@TiO2 nano-structure for SERS detection and photo-reduction of Cr(VI)

A sensitive surface-enhanced resonance Raman scattering sensor with bifunctional negatively charged gold nanoparticles for the determination of Cr(VI)

Hexavalent chromium (Cr(VI)) pollution in the water system has seriously endangered human health and the environment. Herein, we propose a rapid, simple and sensitive surface-enhanced resonance Raman scattering (SERRS) sensor with the bifunctional negatively charged gold nanoparticles ((-)AuNPs) which employ as not only the oxidoreductase-like nanozyme but also the substrate to determine Cr(VI). (-)AuNPs effectively promoted the conversion of 3,3',5,5'-tetramethylbenzidine (TMB) into the blue product of 3,3',5,5'-tetramethylbenzidine diamine (oxTMB) in the presence of Cr(VI) and generated a strong SERRS signal at 1611 cm^-1. According to this principle, the Raman intensity difference at 1611 cm^-1 exhibited a satisfactory linear relationship with the logarithm of the Cr(VI) concentration from 10^-5 to 10^-9 M with a low limit of detection (LOD) of 0.4 nM. In addition, the possible SERRS enhancement mechanism, selectivity and reproducibility were also investigated. What's more, the SERRS platform was successfully applied in the complicated water samples, which was anticipated to become a promising analytical method for monitoring of Cr(VI) in the environment.

Application of sand particles modified with NH2-MIL-101(Fe) as an efficient visible-light photocatalyst for Cr(VI) reduction

This study presented chemical immobilization of an iron(III)-based metal-organic framework [NH₂-MIL-101(Fe)] on the surface of sand particles and its application for Cr(VI) photocatalytic reduction using visible light. The surface of sand particles was functionalized with (3-chloropropyl)trimethoxy silane to provide the active sites for bond formation with MOF particles. Using a heat treatment step, MOF particles were bonded on the surface of sand particles, thereby providing a photocatalyst more applicable in real environments. The presence of amino-functional groups in MOF was influential in bond formation. Furthermore, they are effective in the activation of the photocatalyst under visible-light irradiation. The photocatalyst properties were investigated by FESEM, FTIR, XPS, EDS, and DRS analysis. The impact of various parameters, such as light power, irradiation and contact time, TDS impact, and pH, was examined. The composite produced by immobilization of NH₂-101(Fe) on the surface of sand-Cl showed the high Cr(VI) removal efficiency (80% at 20 mg L^-1) as a result of the strong chemical bond formation through the suitable functional groups incorporated in materials. Under the optimum conditions, the reduction rate reached more than 99% using irradiation by 1000 W visible light for 30 min.

Core-shell magnetic Ag-molecularly imprinted composite for surface enhanced Raman scattering detection of carbaryl

Surface-enhanced Raman scattering (SERS) is a promising technique for rapid detection of pesticide residues. However, conventional SERS substrates require extraction processes which are time consuming and they also lack selectivity, stability and reproducibility. Herein, we present a multifunctional stable zero-valent iron based core-shell substrate. It combines magnetic separation, selective adsorption by molecular imprinting technique and sensitive detection of carbaryl by SERS. The core-shell substrate was successfully prepared by immobilizing silver on the surface of zero-valent iron microspheres. Subsequent molecular imprinting on the bimetallic magnetic silver microspheres ensured selective removal and detection. The substrate exhibited magnetization saturation of 8.89 emu/g providing efficient analyte separation. It showed high sensitivity and selectivity toward carbaryl detection to nanomolar concentration level. Linear regression models for peaks at Raman shift 1599 cm^-1 and 2233 cm^-1 demonstrated a good linear fit with R²=0.9738 and R²=0.8952 respectively. The composite was successfully applied on spiked water samples resulting in average recovery rate of 89%. The findings of this study demonstrate great substrate potential for application in separation and detection of trace quantities of chemical contaminants for environment safety and protection.

In situ SERS monitoring of photocatalysts by Au-decorated Fe3O4@TiO2 nanocomposites: novel perspectives and insights

The design and preparation of multifunctional nanomaterials are very important for photocatalytic research.

Photoreduction and Removal of Cadmium Ions over Bentonite Clay-Supported Zinc Oxide Microcubes in an Aqueous Solution

Cadmium ion is toxic to organisms and shows persistence because of its nondegradability. Photoreduction of the cadmium ion (Cd(II)) was studied using a bentonite-supported Zn oxide (ZnO/BT) photocatalyst in an aqueous medium under ultraviolet light. The prepared ZnO/BT photocatalyst was characterized by diffuse reflectance spectroscopy, field-emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, photoluminescence spectroscopy, transmission electron microscopy, energy-dispersive spectroscopy, and Brunauer-Emmett-Teller/Barrett-Joyner-Halenda analysis. The effects of main parameters including pH, contact time, initial concentration of cadmium(II) ion, light intensity, temperature, and the photocatalyst dosage were investigated for obtaining appreciate reduction/removal efficiency. The maximum reduction/removal efficiency of 74.8% was obtained at optimized values which were found to be at pH 5, 6 h contact time, 6 ppm Cd(II) ion, 200 W UV light, 45 °C temperature, and 4 g/L of ZnO/BT. Reduction/removal of Cd(II) was significantly affected by light intensity so that the increment in UV intensity from 0 to 200 increased the reduction/removal efficiency from 61.2 to 76.8%. This study reports an inexpensive and environmentally friendly photocatalyst for Cd²⁺ reduction in real samples and prospective photoelectric materials.

Applications of magnetic nanoparticles in surface-enhanced Raman scattering (SERS) detection of environmental pollutants

Environmental pollution, a major problem worldwide, poses considerable threat to human health and ecological environment. Efficient and reliable detection technologies, which focus on the appearance of emerging environmental and trace pollutants, are urgently needed. Surface-enhanced Raman scattering (SERS) has become an attractive analytical tool for sensing trace targets in environmental field because of its inherent molecular fingerprint specificity and high sensitivity. In this review, we focused on the recent developments in the integration of magnetic nanoparticles (MNPs) with SERS for facilitating sensitive detection of environmental pollutants. An overview and classification of different types of MNPs for SERS detection were initially provided, enabling us to categorize the huge amount of literature that was available in the interdisciplinary research field of MNPs based SERS technology. Then, the basic working principles and applications of MNPs in SERS detection were presented. Subsequently, the detection technologies integrating MNPs with SERS that eventually were used for the detection of various environmental pollutions were reviewed. Finally, the advantages of MNP-basedSERS detection technology for environmental pollutants were concluded, and the current challenges and future outlook of this technology in practical applications were highlighted. The application of the MNPs-basedSERS techniques for environmental analysis will be significantly advanced with the great progresses of the nanotechnologies, optics, and materials.

Facile synthesis of core-shell nanocomposites Au catalysts towards abatement of environmental pollutant Rhodamine B

Magnetically recoverable Au nanoparticles immobilized/stabilized on core-shell nanocomposites are synthesized by the combination of suspension polymerization as well as surface initiator atom transfer radical polymerization (SI-ATRP) methods. The magnetic core-shell supported Au nanocatalysts are namely Fe₃O₄-PAC-AuNPs, Fe₃O₄-PVBC-g-PAC-AuNPs, Fe₃O₄-HEA-AuNPs, and Fe₃O₄-PVBC-g-HEA-AuNPs. Among all the catalysts, Fe₃O₄-PVBC-g-PAC-Au NPs exhibited an excellent activity in the reduction of Rhodamine B with an apparent rate constant of 10.77 × 10^-3 s^-1 and TOF value of 47.62 × 10^-3 s^-1 under pseudo-first order reaction condition. Further, Fe₃O₄-PVBC-g-PAC-Au NPs has an outstanding activity and recyclability without applying any external magnetic field. This new approach provides an exciting potential way in the preparation of recyclable metal nano-catalysts with high catalytic activity.

Physicochemical analysis of individual atmospheric fine particles based on effective surface-enhanced Raman spectroscopy

Fine particles associated with haze pollution threaten the health of more than 400 million people in China. It is therefore of great importance to thoroughly investigate and understand their composition. To determine the physicochemical properties in atmospheric fine particles at the micrometer level, we described a sensitive and feasible surface-enhanced Raman scattering (SERS) method using Ag foil as a substrate. This novel method enhanced the Raman signal intensities up to 10,000 a.u. for ν(NO₃^-) in fine particles. The SERS effect of Ag foil was further studied experimentally and theoretically and found to have an enhancement factor of the order of ~10⁴. Size-fractionated real particle samples with aerodynamic diameters of 0.4-2.5 μm were successfully collected on a heavy haze day, allowing ready observation of morphology and identification of chemical components, such as soot, nitrates, and sulfates. These results suggest that the Ag-foil-based SERS technique can be effectively used to determine the microscopic characteristics of individual fine particles, which will help to understand haze formation mechanisms and formulate governance policies.