Nanoindentation of clay colloidosomes

Design of a double-layered material as a long-acting moisturizing hydrogel-elastomer and its application in the field protection of elephant ivories excavated from the Sanxingdui Ruins

The sudden change in the environment from a dark, low-oxygen, low-temperature, high-humidity underground stable environment to an environment with much-improved temperature and humidity, a high oxygen content, enhanced light exposure, and increased harmful organisms has greatly affected the stability of the ivory unearthed from the Sanxingdui site. Therefore, the implementation of an effective emergency protection strategy for ivory excavated at Sanxingdui is imperative and urgently needed. However, the current gauze technique used at many archaeological sites suffers from short timescales, poor transparency of the material, and susceptibility to reverse osmosis of the ivory. Therefore, in this study, a transparent poly(acrylamide-acrylic acid) (P(AM-AA)) hydrogel-poly(dimethylsiloxane) (PDMS) elastomer bilayer was designed for the effective protection of excavated ivory. In this system, a hydrophobic PDMS elastomer was constructed on the surface of the hydrogel by the introduction of a silane coupling agent to inhibit the loss of water from the hydrogel to the external environment, thus prolonging the preservation of ivory by the protective material. The covalent interface between the hydrogel and the elastomer allowed the double-layer composite to exhibit excellent interfacial bonding. In addition, the double-layer material demonstrated a high mechanical strength of 1.2 MPa and a water binding ratio of ∼31%, which allowed it to form strong hydrogen bonds with the silanol structure. When the hydrogel was placed in an air environment (temperature: 25 °C; relative humidity: 65% RH), the water-retention rate of the double-layer material was still more than 60% after 5 days, thus the double-layer material showed excellent performance. Meanwhile, the double-layer material had a transmittance of more than 90% and exhibited a high degree of transparency, which makes it possible to promptly observe the changes occurring on the surface of the ivory. The combination of the aforementioned properties makes the bilayer a promising material for moisturizing and protecting excavated ivory in situ. Based on these properties, we used the prepared P(AM-AA)/PDMS double-layer material directly for wrapping the K8 ivory with the highest water content at Sanxingdui. The weight retention rate of the ivory was around 70% after 50 days of placement (temperature: 25 °C; relative humidity: 60% RH), the macroscopic morphology did not change significantly and the mechanical properties of the wrapped ivory were basically unchanged, which indicated that the double-layer material has an excellent on-site protection effect on the ivory excavated from Sanxingdui. This work provides new ideas and methods for the temporary conservation of wet heritage.

Influence of medium structure on the physicochemical properties of aging colloidal dispersions investigated using the synthetic clay LAPONITE®

Physical aging in colloidal dispersions manifests as a reduction in kinetic freedom of the colloids. In aqueous dispersions of charged clay colloids, the role of interparticle electrostatic interactions in determining the aging dynamics has been evaluated extensively. Despite water being the dispersion medium, the influence of water structure on the physicochemical properties of aging clay dispersions has, however, not been considered before. In this work, we use LAPONITE®, a model hectorite clay mineral that acquires surface charges when dispersed in water, to study the relative contributions of dispersion medium structure and interparticle electrostatic interactions on the physicochemical properties of aging hectorite clay dispersions. The structure of the dispersion medium is modified either by incorporating dissociating/non-dissociating kosmotropic (structure-inducing) or chaotropic (structure-disrupting) molecules or by changing dispersion temperature. Photon correlation spectroscopy, rheological measurements and particle-scale imaging are employed to evaluate the physicochemical properties of the dispersions. Our experiments involving incorporation of external additives demonstrate a strong influence of dispersion medium structure on the dispersion properties when the interparticle electrostatic interactions are weak. We introduce a new temperature dependent measurement protocol, wherein the temperature of the medium is fixed before adding the clay particles, to manipulate the hydrogen bonds in the aqueous medium in the absence of external additives. Accelerated aging, observed upon raising the temperature regardless of the experimental thermal histories, is attributed to increased interparticle electrostatic interactions as in the room temperature experiments with ionic additives. Our study identifies that in the presence of weak interparticle electrostatic interactions, changes in the physicochemical properties of charged clay dispersions can be driven by manipulating hydrogen bond populations in aqueous medium.

Clay nanolayer encapsulation, evolving from origins of life to future technologies

Clays are the siblings of graphite and graphene/graphene-oxide. There are two basic ways of using clays for encapsulation of sub-micron entities such as molecules, droplets, or nanoparticles, which is either by encapsulation in the interlayer space of clay nanolayered stacked particles ("the graphite way"), or by using exfoliated clay nanolayers to wrap entities in packages ("the graphene way"). Clays maybe the prerequisites for life on earth and can also be linked to the natural formation of other two-dimensional materials such as naturally occurring graphite and its allotropes. Here we discuss state-of-the-art in the area of clay-based encapsulation and point to some future scientific directions and technological possibilities that could emerge from research in this area.

The potential of magnetic heating for fabricating Pickering-emulsion-based capsules

Pickering emulsions (particle-stabilized emulsions) have been widely explored due to their potential applications, one of which is using them as precursors for the formation of colloidal capsules that could be utilized in, among others, the pharmacy and food industries. Here, we present a novel approach to fabricating such colloidal capsules by using heating in the alternating magnetic field. When exposed to the alternating magnetic field, magnetic particles, owing to the hysteresis and/or relaxation losses, become sources of nano- and micro-heating that can significantly increase the temperature of the colloidal system. This temperature rise was evaluated in oil-in-oil Pickering emulsions stabilized by both magnetite and polystyrene particles. When a sample reached high enough temperature, particle fusion caused by glass transition of polystyrene was observed on surfaces of colloidal droplets. Oil droplets covered with shells of fused polystyrene particles were proved to be less susceptible to external stress, which can be evidence of the successful formation of capsules from Pickering emulsion droplets as templates.

Direction-Specific Release from Capsules with Homogeneous or Janus Shells Using an Ultrasound Approach

A variety of approaches have been developed to release contents from capsules, including techniques that use electric or magnetic fields, light, or ultrasound as a stimulus. However, in the majority of the known approaches, capsules are disintegrated in violent way and the liberation of the encapsulated material is often in a random direction. Thus, the controllable and direction-specific release from microcapsules in a simple and effective way is still a great challenge. This greatly limits the use of microcapsules in applications where targeted and directional release is desirable. Here, we present a convenient ultrasonic method for controllable and unidirectional release of an encapsulated substance. The release is achieved by using MHz-frequency ultrasound that enables the inner liquid stretching, which imposes mechanical stress on the capsule's shell. This leads to the puncturing of the shell and enables smooth liberation of the liquid payload in one direction. We demonstrate that 1-4.3 MHz acoustic waves with the intensity of a few W/cm² are capable of puncturing of particle capsules with diameters ranging from around 300 μm to 5 mm and the release of the encapsulated liquid in a controlled manner. Various aspects of our route, including the role of the capsule size, ultrasound wavelength, and intensity in the performance of the method, are studied in detail. We also show that the additional control of the release can be achieved by using capsules having patchy shells. The presented method can be used to facilitate chemical reactions in micro- and nanolitre droplets and various small-scale laboratory operations carried in bulk liquids in microenvironment. Our results may also serve as an entry point for testing other uses of the method and formulation of theoretical modeling of the presented ultrasound mechanism.

Methods for producing microstructured hydrogels for targeted applications in biology

Hydrogels have been broadly studied for applications in clinically motivated fields such as tissue regeneration, drug delivery, and wound healing, as well as in a wide variety of consumer and industry uses. While the control of mechanical properties and network structures are important in all of these applications, for regenerative medicine applications in particular, matching the chemical, topographical and mechanical properties for the target use/tissue is critical. There have been multiple alternatives developed for fabricating materials with microstructures with goals of controlling the spatial location, phenotypic evolution, and signaling of cells. The commonly employed polymers such as poly(ethylene glycol) (PEG), polypeptides, and polysaccharides (as well as others) can be processed by various methods in order to control material heterogeneity and microscale structures. We review here the more commonly used polymers, chemistries, and methods for generating microstructures in biomaterials, highlighting the range of possible morphologies that can be produced, and the limitations of each method. With a focus in liquid-liquid phase separation, methods and chemistries well suited for stabilizing the interface and arresting the phase separation are covered. As the microstructures can affect cell behavior, examples of such effects are reviewed as well. STATEMENT OF SIGNIFICANCE: Heterogeneous hydrogels with enhanced matrix complexity have been studied for a variety of biomimetic materials. A range of materials based on poly(ethylene glycol), polypeptides, proteins, and/or polysaccharides, have been employed in the studies of materials that by virtue of their microstructure, can control the behaviors of cells. Methods including microfluidics, photolithography, gelation in the presence of porogens, and liquid-liquid phase separation, are presented as possible strategies for producing materials, and their relative advantages and disadvantages are discussed. We also describe in more detail the various processes involved in LLPS, and how they can be manipulated to alter the kinetics of phase separation and to yield different microstructured materials.