Mechanical and chemical studies on EPS from Sulfobacillus thermosulfidooxidans : from planktonic to biofilm cells

Humic acid-mediated mechanism for efficient biodissolution of used lithium batteries

Resource recovery of valuable metals from spent lithium batteries is an inevitable trend for sustainable development. In this study, external regulation was used to enhance the tolerance and stability of strains in the leaching of spent lithium batteries to radically improve the bioleaching efficiency. The leaching of Li, Ni, Co and Mn increased to 100 %, 85.06 %, 74.25 % and 69.44 % respectively after targeted cultivation with HA as compared to the undomesticated strain. In the process of microbial leaching of spent lithium batteries, the metabolites in the Ⅰ, Ⅳ, and Ⅴ regions of the metabolism of the undomesticated bacterial colony had a positive correlation to the dissolution of spent lithium batteries. The metabolites of Ⅰ, Ⅱ, and Ⅴ regions were directly affected by the HA domesticated flora on the dissolution of spent lithium batteries. The excess metabolism of protein substances can significantly promote the reduction of Ni, Co, Mn leaching, and at the same time in the role of a large number of humic substances complexed the toxic metal ions in the system, to ensure the activity of the bacterial colony. It can be seen that the bacteria were domesticated by humic acid, which promoted the bacteria's own metabolism, and the super-metabolised EPS promoted the solubilisation of spent lithium batteries.

Inhibition of iron oxidation in Acidithiobacillus ferrooxidans by low-molecular-weight organic acids: Evaluation of performance and elucidation of mechanisms

The catalytic role of Acidithiobacillus ferrooxidans (A. ferrooxidans) in iron biooxidation is pivotal in the formation of Acid Mine Drainage (AMD), which poses a significant threat to the environment. To control AMD generation, treatments with low-molecular-weight organic acids are being studied, yet their exact mechanisms are unclear. In this study, AMD materials, organic acids, and molecular methods were employed to gain a deeper understanding of the inhibitory effects of low-molecular-weight organic acids on the biooxidation of iron by A. ferrooxidans. The inhibition experiments of A. ferrooxidans on the oxidation of Fe2+ showed that to attain a 90 % inhibition efficacy within 72 h, the minimum concentrations required for formic acid, acetic acid, propionic acid, and lactic acid are 0.5, 6, 4, and 10 mmol/L, respectively. Bacterial imaging illustrated the detrimental effects of these organic acids on the cell envelope structure. This includes severe damage to the outer membrane, particularly from formic and acetic acids, which also caused cell wall damage. Coupled with alterations in the types and quantities of protein, carbohydrate, and nucleic acid content in extracellular polymeric substances (EPS), indicate the mechanisms underlying these inhibitory treatments. Transcriptomic analysis revealed interference of these organic acids with crucial metabolic pathways, particularly those related to energy metabolism. These findings establish a comprehensive theoretical basis for understanding the inhibition of A. ferrooxidans' biooxidation by low-molecular-weight organic acids, offering a novel opportunity to effectively mitigate the generation of AMD at its source.

Research on the decomposition mechanisms of lithium silicate ores with different crystal structures by autotrophic and heterotrophic bacteria

Ores serve as energy and nutrient sources for microorganisms. Through complex biochemical processes, microorganisms disrupt the surface structure of ores and release metal elements. However, there is limited research on the mechanisms by which bacteria with different nutritional modes act during the leaching process of different crystal structure ores. This study evaluated the leaching efficiency of two types of bacteria with different nutritional modes, heterotrophic bacterium Bacillus mucilaginosus (BM) and autotrophic bacterium Acidithiobacillus ferrooxidans (AF), on different crystal structure lithium silicate ores (chain spodumene, layered lepidolite and ring elbaite). The aim was to understand the behavioral differences and decomposition mechanisms of bacteria with different nutritional modes in the process of breaking down distorted crystal lattices of ores. The results revealed that heterotrophic bacterium BM primarily relied on passive processes such as bacterial adsorption, organic acid corrosion, and the complexation of small organic acids and large molecular polymers with metal ions. Autotrophic bacterium AF, in addition to exhibiting stronger passive processes such as organic acid corrosion and complexation, also utilized an active transfer process on the cell surface to oxidize Fe2+ in the ores for energy maintenance and intensified the destruction of ore lattices. As a result, strain AF exhibited a greater leaching effect on the ores compared to strain BM. Regarding the three crystal structure ores, their different stacking modes and proportions of elements led to significant differences in structural stability, with the leaching effect being highest for layered structure, followed by chain structure, and then ring structure. These findings indicate that bacteria with different nutritional modes exhibit distinct physiological behaviors related to their nutritional and energy requirements, ultimately resulting in different sequences and mechanisms of metal ion release from ores after lattice damage.

Biooxidation of hydrogen sulfide to sulfur by moderate thermophilic acidophilic bacteria

The copper industry utilizes significant amounts of sulfuric acid in its processes, generating sulfate as waste. While sulfate-reducing bacteria can remove sulfate, it produces hydrogen sulfide (H2S) as a byproduct. This study examined the capability of a consortium consisting of Sulfobacillus thermosulfidooxidans and Sulfobacillus acidophilus to partially oxidize H2S to S° at a temperature of 45 °C. A fixed-bed bioreactor, with glass rings as support material and sodium thiosulfate as a model electron donor, was inoculated with the consortium. Formation of biofilms was crucial to maintain the bioreactor's steady state, despite high flow rates. Afterward, the electron donor was changed to H2S. When the bioreactor was operated continuously and with high aeration, H2S was fully oxidized to SO42-. However, under conditions of low aeration and at a concentration of 0.26 g/L of H2S, the consortium was able to oxidize H2S to S° with a 13% yield. S° was discovered attached to the glass rings and jarosite. The results indicate that the consortium could oxidize H2S to S° with a 13% yield under low aeration and at a concentration of 0.26 g/L of H2S. The findings highlight the capability of a Sulfobacillus consortium to convert H2S into S°, providing a potential solution for addressing environmental and safety issues associated with sulfate waste generated by the mining industry.

Comprehensive review on recent trends and perspectives of natural exo-polysaccharides: Pioneering nano-biotechnological tools

Exopolysaccharides (EPSs), originating from various microbes, and mushrooms, excel in their conventional role in bioremediation to showcase diverse applications emphasizing nanobiotechnology including nano-drug carriers, nano-excipients, medication and/or cell encapsulation, gene delivery, tissue engineering, diagnostics, and associated treatments. Acknowledged for contributions to adsorption, nutrition, and biomedicine, EPSs are emerging as appealing alternatives to traditional polymers, for biodegradability and biocompatibility. This article shifts away from the conventional utility to delve deeply into the expansive landscape of EPS applications, particularly highlighting their integration into cutting-edge nanobiotechnological methods. Exploring EPS synthesis, extraction, composition, and properties, the discussion emphasizes their structural diversity with molecular weight and heteropolymer compositions. Their role as raw materials for value-added products takes center stage, with critical insights into recent applications in nanobiotechnology. The multifaceted potential, biological relevance, and commercial applicability of EPSs in contemporary research and industry align with the nanotechnological advancements coupled with biotechnological nano-cleansing agents are highlighted. EPS-based nanostructures for biological applications have a bright future ahead of them. Providing crucial information for present and future practices, this review sheds light on how eco-friendly EPSs derived from microbial biomass of terrestrial and aquatic environments can be used to better understand contemporary nanobiotechnology for the benefit of society.

Lithium extraction from typical lithium silicate ores by two bacteria with different metabolic characteristics: Experiments, mechanism and significance

Microorganisms obtain inorganic nutrients or energy from specific minerals to selectively weather minerals, but few studies on the differences in metabolic components of different functional bacteria lead to different weathering effects. This study evaluated the leaching effects of two bacteria with distinct metabolic characteristics on lithium silicate minerals with different structures. We aimed to understand the microscopic mechanism of crystal destruction of lithium silicate minerals with different structures under the action of microorganisms. The results showed that the metabolites produced by an acid producing silicate strain Raoultella sp. Z107 (strain Z107) had a high content of organic acids, among which lactic acid was up to about 11 g/L. Bacillus mucilaginosus 21,699 (strain BM) secreted capsular polysaccharide with a high content of 14.84 mg/L. The metabolic activities of the two strains were significantly different. Through the analysis of the leaching residue, it was found that the lithium silicate minerals were acid etched, interlayer domains expanded, crystallinity decreased, and metal bonds were broken under the action of bacteria. The dissolution of lithium silicate minerals by bacteria is a combination of bacterial adsorption, organic acid corrosion, and complexation of small molecular organic acids and macromolecular polymers with metal ions. The acid erosion and complexation effects of organic acids are greater than the single complexation of capsular polysaccharides, and the layered lepidolite is more likely to be decomposed by the weathering of bacterial metabolites than the chain structure spodumene. These results indicate that the diversity of metabolic activity of bacteria from different sources and the sequence and decomposition mechanism of metal ions released from minerals after lattice destruction are also different. Microorganisms decompose minerals for energy and nutrients, and eventually become the main players in the transformation of elements in biogeology.

Bioleaching performance of vanadium-bearing smelting ash by Acidithiobacillus ferrooxidans for vanadium recovery

The bioleaching process is widely used in the treatment of ores or solid wastes, but little is known about its application in the treatment of vanadium-bearing smelting ash. This study investigated bioleaching of smelting ash with Acidithiobacillus ferrooxidans. The vanadium-bearing smelting ash was first treated with 0.1 M acetate buffer and then leached in the culture of Acidithiobacillus ferrooxidans. Comparison between one-step and two-step leaching process indicated that microbial metabolites could contribute to the bioleaching. The Acidithiobacillus ferrooxidans demonstrated a high vanadium leaching potential, solubilizing 41.9% of vanadium from the smelting ash. The optimal leaching condition was determined, which was 1% pulp density, 10% inoculum volume, an initial pH of 1.8, and 3 Fe²⁺g/L. The compositional analysis showed that the fraction of reducible, oxidizable, and acid-soluble was transferred into the leaching liquor. Therefore, as the alternative to the chemical/physical process, an efficient bioleaching process was proposed to enhance the recovery of vanadium from the vanadium-bearing smelting ash.

Advances in bioleaching of waste lithium batteries under metal ion stress

In modern societies, the accumulation of vast amounts of waste Li-ion batteries (WLIBs) is a grave concern. Bioleaching has great potential for the economic recovery of valuable metals from various electronic wastes. It has been successfully applied in mining on commercial scales. Bioleaching of WLIBs can not only recover valuable metals but also prevent environmental pollution. Many acidophilic microorganisms (APM) have been used in bioleaching of natural ores and urban mines. However, the activities of the growth and metabolism of APM are seriously inhibited by the high concentrations of heavy metal ions released by the bio-solubilization process, which slows down bioleaching over time. Only when the response mechanism of APM to harsh conditions is well understood, effective strategies to address this critical operational hurdle can be obtained. In this review, a multi-scale approach is used to summarize studies on the characteristics of bioleaching processes under metal ion stress. The response mechanisms of bacteria, including the mRNA expression levels of intracellular genes related to heavy metal ion resistance, are also reviewed. Alleviation of metal ion stress via addition of chemicals, such as spermine and glutathione is discussed. Monitoring using electrochemical characteristics of APM biofilms under metal ion stress is explored. In conclusion, effective engineering strategies can be proposed based on a deep understanding of the response mechanisms of APM to metal ion stress, which have been used to improve bioleaching efficiency effectively in lab tests. It is very important to engineer new bioleaching strains with high resistance to metal ions using gene editing and synthetic biotechnology in the near future.

The biofilm matrix: multitasking in a shared space

The biofilm matrix can be considered to be a shared space for the encased microbial cells, comprising a wide variety of extracellular polymeric substances (EPS), such as polysaccharides, proteins, amyloids, lipids and extracellular DNA (eDNA), as well as membrane vesicles and humic-like microbially derived refractory substances. EPS are dynamic in space and time and their components interact in complex ways, fulfilling various functions: to stabilize the matrix, acquire nutrients, retain and protect eDNA or exoenzymes, or offer sorption sites for ions and hydrophobic substances. The retention of exoenzymes effectively renders the biofilm matrix an external digestion system influencing the global turnover of biopolymers, considering the ubiquitous relevance of biofilms. Physico-chemical and biological interactions and environmental conditions enable biofilm systems to morph into films, microcolonies and macrocolonies, films, ridges, ripples, columns, pellicles, bubbles, mushrooms and suspended aggregates - in response to the very diverse conditions confronting a particular biofilm community. Assembly and dynamics of the matrix are mostly coordinated by secondary messengers, signalling molecules or small RNAs, in both medically relevant and environmental biofilms. Fully deciphering how bacteria provide structure to the matrix, and thus facilitate and benefit from extracellular reactions, remains the challenge for future biofilm research.

Extracellular DNA plays a key role in the structural stability of sulfide-based denitrifying biofilms

Sulfide-based biofilm processes are increasingly used for wastewater denitrification, yet little is known about the extracellular polymeric substance (EPS) composition of sulfide-oxidizing biofilms. This can have an important impact on biofilm mechanical strength and stability. In this research, the properties and roles of EPS components in biofilm stability were investigated. Weak biofilm stability characterized by high roughness and numerous "needle" structures was visualized by optical coherence tomography (OCT) and microscopy. A high abundance of extracellular DNA (eDNA) and a low protein to polysaccharide ratio were found in the biofilm. The roles of eDNA, protein and polysaccharide in biofilm cohesion and adhesion were identified through enzyme treatment and atomic force microscopy (AFM). The enzymatic hydrolysis of eDNA increased the elastic modulus of biofilms by 57 times and reduced the adhesion energy by 96%. The hydrolysis of proteins led to an increase of elastic modulus by 27 times and a loss of adhesion energy by 95.5%. The enzymatic hydrolysis of polysaccharides caused minimal changes in elastic modulus and adhesion energy. These results suggest that eDNA was the key EPS component for biofilm cohesion and adhesion, possibly because it provided special binding sites and can form strong cross-linking with magnesium or other multivalent cations. This study provided new insights into the role of eDNA in biofilm stability and shed light on the development of sulfide-based denitrifying biofilms.

Denitrification strategy of Pantoea sp. MFG10 coupled with microbial dissimilatory manganese reduction: Deciphering the physiological response based on extracellular secretion

In this study, the manganese (Mn) reduction-coupled denitrification strategy of dissimilatory Mn reducing bacteria was insightfully investigated. Different parameters (MnO₂ level, pH, and temperature) were optimized by kinetic fitting to improve denitrification and Mn reduction effects. The 300 mg L^-1 MnO₂ addition achieved 98.72% NO₃^--N removal in 12 h, which was 54.62% higher than blank group without MnO₂. Scale-up studies showed that the metabolic activity of the bacteria was effectively enhanced by the addition of MnO₂. Besides the deepening of humification in the system, tryptophan-like protein and polysaccharide as potential electron donor precursors revealed remarkable contributions to the extracellular secretion-dependent denitrification process of DMRB. The effect of EPS on Mn reduction depends mainly on the capture of MnO₂ by the LB-EPS layer versus its dissolution in the TB-EPS layer. Ultimately, the EPS possess a dual effect of accelerated denitrification and Mn reduction efficiency due to the enhanced EET process.

Insights into the polysaccharides and proteins production from Penicillium citrinum during bioleaching of spent coin cells

The essential role of polysaccharides and proteins of extracellular polymeric substances (EPS) has been well known in the bioleaching process. However, there is no information on the role of these compositions in the bioleaching of spent coin cells (SCCs). This study investigated protein and polysaccharide production as biological macromolecules during the bioleaching of SCCs at various pulp densities using adapted Penicillium citrinum. The adaptation improved the tolerance index of fungi for the bioleaching up to a pulp density of 30 g/L. The EPS analysis indicated that loosely bound EPS (LB-EPS) contained a high concentration of polysaccharides. Instead, the most protein content was concentrated at tightly bound EPS (TB-EPS). Both protein and polysaccharide keep growing up to 20 g/L of pulp density during the entire period of bioleaching, and the maximum binding rate of Mn and Li to EPS was 43% and 15%, respectively. Pearson correlation indicated the positive correlation of the protein and the polysaccharides content on bioleaching efficiencies. From the FTIR spectroscopy, the principal functional groups on Mn and Li binding were OH and carboxyl. The FE-SEM analysis revealed the deformation of EPS at 30 g/L of pulp density, which suggested the toxic effect of this pulp density.

Bioleaching of rare earths elements from phosphate rock using Acidothiobacillus ferrooxidans

Phosphate rock containing rare earth elements (REEs) is considered one of the most promising potential secondary sources of REEs, as evidenced by large tonnages of phosphate rock mined annually. The bioleaching of REEs from phosphate rock using A. ferrooxidans was done for the first time in this study, and it was found to be greater than abiotic leaching and was more environmentally friendly. The result showed that the total leaching rate of REEs in phosphate rock was 28.46% under the condition of 1% pulp concentration and pH=2, and the leaching rates of four key rare earths, Y, La, Ce, and Nd, were 35.7%, 37.03%, 27.92%, and 32.53%, respectively. The bioleaching process was found to be accomplished by bacterial contact and Fe²⁺ oxidation. The blank control group which contained Fe²⁺ was able to leach some of the rare earths, indicating that the oxidation of Fe²⁺ may affect the leaching of rare earths. X-Ray Diffraction (XRD)analysis showed that the minerals were significantly altered and the intensity of the diffraction peaks of dolomite and apatite decreased significantly after microbial action compared to the blank control, and it was observed that bacteria adhere to the mineral surface and the minerals become smooth and angular after bioleaching by Scanning electron microscope (SEM), indicating that bacteria have a further effect on the rock based on Fe²⁺ oxidation.Finally.Fourier Transform infrared spectroscopy (FTIR) and three-dimensional excitation-emission matrix (3DEEM) fluorescence spectra analysis showed that extracellular polymeric substances (EPS) participate in the bioleaching process.

Recent progress in understanding the ecology and molecular genetics of soil mineral weathering bacteria

Mineral weathering bacteria play essential roles in nutrient cycling and plant nutrition. However, we are far from having a comprehensive view of the factors regulating their distribution and the molecular mechanisms involved. In this review, we highlight the extrinsic factors (i.e., nutrient availability, carbon source) and the intrinsic properties of minerals explaining the distribution and functioning of these functional communities. We also present and discuss the progress made in understanding the molecular mechanisms and genes that are used by bacteria during the mineral weathering process, or regulated during their interaction with minerals, that have been recently unraveled by omics approaches.

A designed moderately thermophilic consortia with a better performance for leaching high grade fine lead-zinc sulfide ore

Unwieldy fine sulfide ores are produced during mining; without being appropriately disposed of, they can cause environmental pollution and waste resources. This study investigated the leaching performance of a moderately thermophilic consortia (Leptospirillum ferriphilum + Acidithiobacillus caldus + Sulfobacillus benefaciens) for fine lead-zinc sulfide raw ore. The results showed this microbial community created a low pH, high ORP, and high cell concentration environment for mineral leaching, improving bioleaching efficiency. Under the action of this consortia, the zinc leaching rate reached 96.44 in 8 days, and reached 100% after 12 days. EPS analysis indicated that the consortia could mediate the secretion of more polysaccharides to ensure leaching efficiency. EPS levels and amino acids were the main factors affecting bioleaching. An analysis of mineral surface characteristics showed the consortia effectively leached pyrite and sphalerite from the fine sulfide ore, and prevented the mineral surface forming the jarosite that could hinder bioleaching. This study found that bioleaching reduced the potential environmental toxicity of the minerals, providing an important reference for guiding the bioleaching of unwieldy fine sulfide raw ore.

Effect of diurnal temperature range on bioleaching of sulfide ore by an artificial microbial consortium

Temperature is considered to be one of the main factors affecting bioleaching, but few studies have assessed the effects of diurnal temperature range (DTR) on the bioleaching process. This study investigates the effects of different bioleaching temperatures (30 and 40 °C) and DTR on the bioleaching of metal sulfide ores by microbial communities. The results showed that DTR had an obvious inhibitory effect on the bioleaching efficiency of the artificial microbial community, although this effect was mainly concentrated in the early and middle stages (0-18 days) of exposure, gradually decreasing until almost disappearing in the late stage (18-24 days). Extracellular polymeric substance (EPS) analysis showed that DTR did not change the composition of the EPS matrix (humic acid-like substances, polysaccharides and protein-like substances), but had a significant effect on the generative behavior of EPS, inhibiting the secretion of EPS during the early and middle stages of the bioleaching process. However, the continual increase in EPS secretion in the bioleaching system gradually reduced the adverse effects of DTR on mineral dissolution. X-ray diffraction (XRD), Fourier transform infrared (FTIR) and Scanning electron microscopy- energy dispersive spectrometry (SEM-EDS) analysis of the bioleached residue showed that DTR had no obvious effect on the mineralogical characteristics of sulfide ore. Therefore, in industrial sulfide ore bioleaching applications, in order to accelerate the artificial microbial community start-up process, temperature control measures should be increased in the bioleaching process to reduce the adverse effects of DTR on mineral dissolution.

Low concentration of Tween-20 enhanced the adhesion and biofilm formation of Acidianus manzaensis YN-25 on chalcopyrite surface

Although Tween-20 was used as an important catalyst to increase chalcopyrite bioleaching rate by acidophiles, the effect of Tween-20 on initial adhesion and biofilm development of acidophiles on chalcopyrite has not been explored until now. Herein, the role of Tween-20 in early attachment behaviors and biofilm development by Acidianus manzaensis strain YN-25 were investigated by adhesion experiments, adhesion force measurement, visualization of biofilm assays and a series of analyses including extended Derjaguin Landau Verwey Overbeek (DLVO) theory, scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). The bacterial adhesion experiments showed that 2 mg/L of Tween-20 increased the adhesion percentage (by 8%) of A. manzaensis YN-25. Tween-20 could promote the early adhesion of A. manzaensis YN-25 by changing the Lewis acid-base interaction and electrostatic force to increase total interaction energy and adhesion force. Besides, the functional groups on the surface of cells (carboxyl, hydroxyl and amino functional groups) contributed to the adhesion of A. manzaensis YN-25 on chalcopyrite. Furthermore, the promotion of biofilm formation by Tween-20 was mainly attributed to the reduction of S⁰ passivation layer formation and complexing more Fe³⁺ on chalcopyrite surface, contributing to the erosion of chalcopyrite and creating more corrosion pits. Live/dead staining showed low live/dead ratio (ranged from 0.35 to 1.32) during the biofilm development process. This report offers a better understanding of the effects of Tween-20 on attachment and biofilm development of acidophilic microorganisms and would lay a theoretical foundation for the better application of catalyst in bioleaching.

Acid resistance system CadBA is implicated in acid tolerance and biofilm formation and is identified as a new virulence factor of Edwardsiella tarda

Edwardsiella tarda is a facultative intracellular pathogen in humans and animals. The Gram-negative bacterium is widely considered a potentially important bacterial pathogen. Adaptation to acid stress is important for the transmission of intestinal microbes, so the acid-resistance (AR) system is essential. However, the AR systems of E. tarda are totally unknown. In this study, a lysine-dependent acid resistance (LDAR) system in E. tarda, CadBA, was characterized and identified. CadB is a membrane protein and shares high homology with the lysine/cadaverine antiporter. CadA contains a PLP-binding core domain and a pyridoxal phosphate-binding motif. It shares high homology with lysine decarboxylase. cadB and cadA are co-transcribed under one operon. To study the function of the cadBA operon, isogenic cadA, cadB and cadBA deletion mutant strains TX01ΔcadA, TX01ΔcadB and TX01ΔcadBA were constructed. When cultured under normal conditions, the wild type strain and three mutants exhibited the same growth performance. However, when cultured under acid conditions, the growth of three mutants, especially TX01ΔcadA, were obviously retarded, compared to the wild strain TX01, which indicates the important involvement of the cadBA operon in acid resistance. The deletion of cadB or cadA, especially cadBA, significantly attenuated bacterial activity of lysine decarboxylase, suggesting the vital participation of cadBA operon in lysine metabolism, which is closely related to acid resistance. The mutations of cadBA operon enhanced bacterial biofilm formation, especially under acid conditions. The deletions of the cadBA operon reduced bacterial adhesion and invasion to Hela cells. Consistently, the deficiency of cadBA operon abated bacterial survival and replication in macrophages, and decreased bacterial dissemination in fish tissues. Our results also show that the expression of cadBA operon and regulator cadC were up-regulated upon acid stress, and CadC rigorously regulated the expression of cadBA operon, especially under acid conditions. These findings demonstrate that the AR CadBA system was a requisite for the resistance of E. tarda against acid stress, and played a critical role in bacterial infection of host cells and in host tissues. This is the first study about the acid resistance system of E. tarda and provides new insights into the acid-resistance mechanism and pathogenesis of E. tarda.

Ag+ significantly promoted the biofilm formation of thermoacidophilic archaeon Acidianus manzaensis YN-25 on chalcopyrite surface

Silver ion (Ag⁺) is an important catalyst to improve chalcopyrite bio-dissolution, but its effects on initial adhesion behaviors and biofilm formation of acidophiles onto metal sulfide were still unknown. In this study, initial attachment behavior and adhesion force in the presence of Ag⁺ (0, 1, 2, 5, 10 and 20 mg/L) were comparatively analyzed for Acidianus manzaensis YN-25. Biofilm was observed by fluorescent images in the presence of 0, 1 and 2 mg/L Ag⁺. X-ray photoelectron spectroscopy (XPS) corroborated the catalytic mechanisms of Ag⁺ to biofilm formation. Results showed that Ag⁺ could significantly promote the attachment of cells on chalcopyrite, and the optimum concentration of Ag⁺ was 2 mg/L with the biggest percentage of attached cells (74%), followed by 5 mg/L (71%), whereas that for the control (0 mg/L) was only 61%. Ag⁺ significantly increased the interaction force between A. manzaensis YN-25 and chalcopyrite. Compared with the control, larger coverage of biofilm (up to 40% versus 32%) and more corrosion pits were observed on chalcopyrite in the presence of 2 mg/L Ag⁺. Moreover, Ag⁺ catalyzed chalcopyrite corrosion and accelerated biofilm formation by producing a loose porous Ag₂S layer and Ag⁰ to decrease the resistivity. The live/dead ratio was small with a range of 0.31-1.38, suggesting that dead cells were a great slice during the whole life-cycle of biofilm on chalcopyrite. This report offers a profound insight into the promotion mechanism of Ag⁺ on adhesion behaviors and biofilm formation by thermoacidophilic archaeon under extremely acidic conditions.

Generation behavior of extracellular polymeric substances and its correlation with extraction efficiency of valuable metals and change of process parameters during bioleaching of spent petroleum catalyst

The vital functions of extracellular polymeric substances (EPS) have been well recognized in bioleaching of sulfide ores. However, no report is available about the role of EPS in bioleaching of spent catalyst. To completely and deeply understand the functions of EPS in bioleaching of spent catalyst, the generation behavior of EPS at various pulp densities during bioleaching was characterized by three-dimensional excitation-emission matrix (3DEEM), and its relevance with bioleaching performance and process parameters were analyzed using mathematical means. The results showed that the EPS contain humus-like substances as main component (>70%) and protein-like substances as minor component (<30%). Both total EPS and humus-like substances mainly keep growing over the whole duration of bioleaching at low pulp density of 5.0% or lower; whereas total EPS and humus-like fraction keep declining at high pulp density of 7.5% or higher. Among the total EPS and its components, humus-like substances only have a positive significant correlation with bioleaching efficiencies of both Co and Mo and affect bioleaching process more greatly due to greater correlation coefficient. Biofilm appears at the spent catalyst surface under 2.5% of pulp density mediated by EPS while no biofilm occurs at 10% of pulp density due to shortage of EPS, accounting for the great difference in bioleaching efficiencies between high and low pulp densities which are 48.3% for Mo and 50.0% for Co at 10% of pulp density as well as 75.9% for Mo and 78.8% for Co at 2.5% of pulp density, respectively.

Simultaneously enhance iron/sulfur metabolism in column bioleaching of chalcocite by pyrite and sulfur oxidizers based on joint utilization of waste resource

In chalcocite (Cu₂S) bioleaching, the lack of iron metabolism is a key restricting factor. As the most common sulfide mineral, pyrite (FeS₂) can release Fe(Ⅱ) and compensate for the iron metabolism deficiency in chalcocite bioleaching. The bioleaching of chalcocite in an imitated industrial system was improved by enhancing the iron-sulfur metabolism simultaneously using pyrite and sulfur oxidizers based on the joint utilization of waste resources, while the bioleaching performance and community structure in the leachate were systematically investigated. Due to the active sulfur/iron metabolism, the pH reached 1.2, and Fe³⁺ was increased by 77.78%, while the biomass of planktonic cells was improved to 2.19 × 10⁷ cells/mL. Fourier transform infrared reflection (FTIR) and X-ray diffraction (XRD) analysis results showed that more iron-sulfur crystals were produced due to more active iron-sulfur metabolism. Scanning electron microscopy (SEM) revealed that many derivative particles and corrosion marks appeared on the surface of the ore, implying that the mineral-microbe interaction was strengthened. Confocal laser scanning microscopy (CLSM) showed the accumulation of cells and extracellular polymeric substances (EPS) on the ore surface, indicating a stronger contact leaching mechanism. Furthermore, the community structure and canonical correspondence analysis (CCA) demonstrated that the introduction of sulfur-oxidizing bacteria and pyrite could maintain the diversity of dominant leaching microorganisms at a high level. Sulfobacillus (27.75%) and Leptospirllillum (20.26%) were the dominant sulfur-oxidizing and iron-oxidizing bacteria during the bioleaching process. With the accumulation of multiple positive effects, the copper ion leaching rate was improved by 44.8%. In general, this new type of multiple intervention strategy can provide an important guide for the bioleaching of low-grade ores.

Bioleaching for detoxification of waste flotation tailings: Relationship between EPS substances and bioleaching behavior

The production of large volumes of waste flotation tailings results in environmental pollution and presents a major ecological and environmental risk. This study investigates bioleaching of waste flotation tailings using Acidithiobacillus ferrooxidans. The experiments were performed with 5.00% solid concentration, pH 2.0 with 100 mL medium for 25 d in the lab. The pH, OPR, metal concentration, dissolved organic matter (DOM) in leachate and extracellular polymeric substances (EPS) were recorded. Bioleaching tailing materials were finally characterized. Results showed that microorganisms, acclimating with mine tailings, effectively accelerated the bioleaching process, achieving maximum Zn and Fe extraction efficiencies of 95.45% and 83.98%, respectively, after 25 days. Compared with raw mine tailings, bioleaching could reduce 96.36% and 95.84% leachable Zn and Pb, and Pb presented a low risk (4.13%), while Zn, Cu, and Cr posed no risk (0.34%, 0.64%, and 0%). Toxicity and environmental risk analysis revealed bioleaching process significantly reduced the environmental risk associated with mine tailings. EPS analysis indicated that the loosely-bound EPS (LB-EPS) and tightly-bound EPS (TB-EPS) fractions contained different organic substances, which played different roles in the bioleaching process. Pearson correlation analysis revealed that EPS was highly correlated with bioleaching behavior (p < 0.05), and EPS was the main factor affecting the bioleaching process, promoting bioleaching in the LB-EPS and TB-EPS fractions.

Newly Isolated Acidithiobacillus sp. Ksh From Kashen Copper Ore: Peculiarities of EPS and Colloidal Exopolysaccharide

A novel strain of an iron- and sulfur-oxidizing bacterium was isolated from a natural biotope at Kashen copper ore (Martakert Province, Republic of Artsakh). The strain is able to grow and oxidize ferrous ions in the range of pH 1.4-2.6 with optimal pH 2.0. The optimal temperature for growth is 35°C. Acidithiobacillus sp. Ksh has shown the highest activity for pyrite oxidation among other strains. It also demonstrated high activity in oxidation for copper and copper-gold bearing ores (Armenia). The isolate Acidithiobacillus sp. Ksh was identified as Acidithiobacillus ferrooxidans based on phylogenetic and physiological studies. Comparative studies of EPS production by cells grown on ferrous ions or pyrite were carried out. The chemical composition of capsular and colloidal EPS produced by Acidithiobacillus (At.) ferrooxidans Ksh were revealed to be proteins and carbohydrates. Exosaccharide produced by At. ferrooxidans Ksh is present mainly as polysaccharide in contrast to Leptospirillum (L.) ferriphilum CC, which is oligosaccharide. The structural difference of colloidal particles of these polysaccharides was due to the degree of hydration of the saccharide molecules.

A new strategy on biomining of low grade base-metal sulfide tailings

This study investigated the effect of designed microbial consortia on biomining of low grade base-metal sulfide tailings. The results show the amount of recycled metals were equal if the tailings were leached by mixed cultures of Leptospirillum ferriphilum and Acidithiobacillus thiooxidans at three different ratios or by pure culture of L. ferriphilum, which was better than the pure culture of Acidithiobacillus ferrooxidans. qPCR (quantitative polymerase chain reaction) demonstrated only L. ferriphilum functioned in the mixtures at initial stage. The results of extracellular polymeric substances (EPS) via three-dimensional excitation-emission matrix combined with parallel factor analysis (3DEEM-PARAFAC) collected from mixed or pure cultures indicated there were no interactions between two strains. Secondary minerals were formed, but did not influence the leaching process. A new strategy for tailings biomining was proposed: only ferrous oxidizers should be added during the initial and middle biomining stage, while sulfur oxidizers should be added at the end.

Enhanced "contact mechanism" for interaction of extracellular polymeric substances with low-grade copper-bearing sulfide ore in bioleaching by moderately thermophilic Acidithiobacillus caldus

In order to enhance the "contact mechanism" governing the interaction of extracellular polymeric substances (EPS) with low-grade copper-bearing sulfide ore for the bioleaching of copper, moderately thermophilic Acidithiobacillus caldus was subjected to exogenous intervention with iron and sulfur. The enhancement of the contact mechanism was systematically investigated by evaluating the attached cells/EPS dynamics, intracellular adenosine triphosphate (ATP), cell functional groups, gene transcriptional level, and ore characteristics. Confocal laser scanning microscopy (CLSM) revealed that exogenous intervention with iron and sulfur led to the production of a denser EPS layer and faster adsorption of the attached cells to the ore based on differential fluorescence staining, which indicated enhancement of the "contact mechanism". The increased intracellular ATP content of the attached cells in the exogenous substrate system provided the required energy for the adsorption processes associated with the "contact mechanism". Fourier-transform infrared spectroscopic (FTIR) analysis of the attached cells and the ore showed a dramatic shift of the NH and COS peaks (associated with EPS formation), whereas the FTIR peaks of SO and SO₄^2- associated with sulfur metabolism were also significantly influenced. Moreover, reverse transcription polymerase chain reaction (RT-PCR) analysis revealed that the expression of genes related to cellular energy metabolism (nuoB, nuoC, atpE, atpF), sulfur metabolism (sor, sqr, sdo, soxA), biofilm formation (pgaA, pgaB), and cell colonization (acfA, acfB, acfC, acfD) was up-regulated after exogenous intervention, verifying enhancement of the "contact mechanism" at the transcriptional level. In addition, scanning electron microscopy (SEM) indicated more obvious adsorption traces on the ore surface. X-ray diffraction (XRD) indicated the presence of more complex derivatives, such as Fe₃(SO₄)₄, FeSO₄, Fe₂(SO₄)₃, and Cu₂S, which is suggestive of more active iron/sulfur metabolism with addition of the exogenous iron and sulfur. Overall, a model for bioleaching of low-grade copper-bearing sulfide ore by moderately thermophilic A. caldus was constructed. The results of this investigation should provide a guide for similar industrial bioleaching processes.

Insight Into Interactions of Thermoacidophilic Archaea With Elemental Sulfur: Biofilm Dynamics and EPS Analysis

Biooxidation of reduced inorganic sulfur compounds (RISCs) by thermoacidophiles is of particular interest for the biomining industry and for environmental issues, e.g., formation of acid mine drainage (AMD). Up to now, interfacial interactions of acidophiles with elemental sulfur as well as the mechanisms of sulfur oxidation by acidophiles, especially thermoacidophiles, are not yet fully clear. This work focused on how a crenarchaeal isolate Acidianus sp. DSM 29099 interacts with elemental sulfur. Analysis by Confocal laser scanning microscopy (CLSM) and Atomic force microscopy (AFM) in combination with Epifluorescence microscopy (EFM) shows that biofilms on elemental sulfur are characterized by single colonies and a monolayer in first stage and later on 3-D structures with a diameter of up to 100 μm. The analysis of extracellular polymeric substances (EPS) by a non-destructive lectin approach (fluorescence lectin-barcoding analysis) using several fluorochromes shows that intial attachment was featured by footprints rich in biofilm cells that were embedded in an EPS matrix consisting of various glycoconjugates. Wet chemistry data indicate that carbohydrates, proteins, lipids and uronic acids are the main components. Attenuated reflectance (ATR)-Fourier transformation infrared spectroscopy (FTIR) and high-performance anion exchange chromatography with pulsed amperometric detection (HPAE-PAD) indicate glucose and mannose as the main monosaccharides in EPS polysaccharides. EPS composition as well as sugar types in EPS vary according to substrate (sulfur or tetrathionate) and lifestyle (biofilms and planktonic cells). This study provides information on the building blocks/make up as well as dynamics of biofilms of thermoacidophilic archaea in extremely acidic environments.

Specific mechanism of Acidithiobacillus caldus extracellular polymeric substances in the bioleaching of copper-bearing sulfide ore

This study aimed to reveal the specific mechanism of extracellular polymeric substances (EPS) in the bioleaching of copper-bearing sulfide ore by moderately thermophilic bacterium Acidithiobacillus caldus. The bioleaching performance of blank control (BC), planktonic cell deficient (PD), attached cell deficient (AD), and EPS deficient (ED) systems were compared, to investigate the specific functions of "non-contact" and "contact" (including direct contact and, EPS-mediated contact) mechanisms. The detailed mechanics of bioleaching were studied using μx of cell growth, scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The μx of cell growth demonstrated that EPS favors planktonic and attached cell growth. SEM observation revealed that intensive micro-pores on slag benefitted from the "EPS-mediated contact" mechanism. XRD identification indicated that additional chemical derivatives were produced via "EPS-mediated contact" mechanism, because of the active iron/sulfur metabolism. FTIR analysis revealed that the absorption peaks of C-O-S, sulfate, and S = O, which are closely associated with sulfur metabolism, have significant influences of EPS secretion. Taken together, the "EPS-mediated contact" mechanism contributed to almost half of the "contact" mechanism efficiency and a quarter of the total bioleaching efficiency. The proposed specific mechanism of EPS can deepen our understanding of similar bioleaching processes.

Adhesion to Mineral Surfaces by Cells of Leptospirillum, Acidithiobacillus and Sulfobacillus from Armenian Sulfide Ores

Bioleaching of metal sulfides is an interfacial process where adhesion and subsequent biofilm formation are considered to be crucial for this process. In this study, adhesion and biofilm formation by several acidophiles (Acidithiobacillus, Leptospirillum and Sulfobacillus) isolated from different biotopes with sulfide ores in Armenia were studied. Results showed that: (1) these bacteria adhere to pyrite surfaces to various extents. A correlation between pyrite biooxidation and adhesion of S. thermosulfidooxidans 6, L. ferriphilum CC, L. ferrooxidans ZC on pyrite surfaces is shown. It is supposed that bioleaching of pyrite by S. thermosulfidooxidans 6, L. ferriphilum CC, L. ferrooxidans ZC occurs by means of indirect leaching: by ferric iron of bacterial origin; (2) cells of At. ferrooxidans 61, L. ferrooxidans ZC and St. thermosulfidooxidans 6 form a monolayer biofilm on pyrite surfaces. The coverage of pyrite surfaces varies among these species. The order of the biofilm coverage is: L. ferrooxidans ZC ≥ At. ferrooxidans 61 > St. thermosulfidooxidans 6; (3) the extracellular polymeric substances (EPS) analysis indicates that the tested strains produce EPS, if grown either on soluble ferrous iron or solid pyrite. EPS are mainly composed of proteins and carbohydrates. Cells excrete higher amounts of capsular EPS than of colloidal EPS. In addition, cells grown on pyrite produce more EPS than ones grown on ferrous iron.

Impact of biological clogging on the barrier performance of landfill liners

The durability of landfill mainly relies on the anti-seepage characteristic of liner system. The accumulation of microbial biomass is effective in reducing the hydraulic conductivity of soils. This study aimed at evaluating the impact of the microorganism on the barrier performance of landfill liners. According to the results, Escherichia coli. produced huge amounts of extracellular polymeric substances and coalesced to form a confluent plugging biofilm. This microorganism eventually resulted in the decrease of soil permeability by 81%-95%. Meanwhile, the increase of surface roughness inside the internal pores improved the adhesion between microorganism colonization and particle surface. Subsequently, an extensive parametric sensitivity analysis was undertaken for evaluating the contaminant transport in landfill liners. Decreasing the hydraulic conductivity from 1 × 10^-8 m/s to 1 × 10^-10 m/s resulted in the increase of the breakthrough time by 345.2%. This indicates that a low hydraulic conductivity was essential for the liner systems to achieve desirable barrier performance.

Comparative Analysis of Attachment to Chalcopyrite of Three Mesophilic Iron and/or Sulfur-Oxidizing Acidophiles

Adhesion plays an important role in bacterial dissolution of metal sulfides, since the attached cells initiate the dissolution. In addition, biofilms, forming after bacterial attachment, enhance the dissolution. In this study, interactions between initial adhesion force, attachment behavior and copper recovery were comparatively analyzed for Acidithiobacillus ferrooxidans, Acidithiobacillus thiooxidans, and Leptospirillum ferrooxidans during bioleaching of chalcopyrite. The adhesion forces between bacteria and minerals were measured by atomic force microscopy (AFM). L. ferrooxidans had the largest adhesion force and attached best to chalcopyrite, while A. ferrooxidans exhibited the highest bioleaching of chalcopyrite. The results suggest that the biofilm formation, rather than the initial adhesion, is positively correlated with bioleaching efficiency.

In situ characterization of change in superficial organic components of thermoacidophilic archaeon Acidianus manzaensis YN-25

For the first time, synchrotron radiation (SR) -based carbon K-edge X-ray absorption near edge structure (XANES) spectroscopy in-situ characterization was conducted to evaluate the evolution of superficial (about 10 nm) organic components of extracellular polymeric substances (EPS) of thermoacidophilic archaeon Acidianus manzaensis YN-25 acclimated with different energy substrates (FeS₂, CuFeS₂, S⁰, FeSO₄). The atomic force microscopy (AFM) morphology scanning showed that the strain acclimated with different energy substrates varied a lot in EPS amount. XANES results showed clear associations between the energy substrates and the changes in organic composition in terms of typical function groups (CO, CO and CN). The chalcopyrite- and pyrite-acclimated cells contained higher proportion of proteins but less proportion of polysaccharides than the S⁰-acclimated cells. The FeSO₄-acclimated cells contained the highest proportion of proteins, while the S⁰-acclimated cells contained more lipids and polysaccharides. The results of linear-combination and peak fitting of the K-edge XANES for the extracellular superficial organic component C is consistent with the trend in comparison with the results of FTIR and spectrophotometric determination, but there are significant differences in the values. These differences are caused by the inconsistencies of measurement depth between XANES and the latter two characterization methods.

The Role of Oral Cavity Biofilm on Metallic Biomaterial Surface Destruction-Corrosion and Friction Aspects

Metallic biomaterials in the oral cavity are exposed to many factors such as saliva, bacterial microflora, food, temperature fluctuations, and mechanical forces. Extreme conditions present in the oral cavity affect biomaterial exploitation and significantly reduce its biofunctionality, limiting the time of exploitation stability. We mainly refer to friction, corrosion, and biocorrosion processes. Saliva plays an important role and is responsible for lubrication and biofilm formation as a transporter of nutrients for microorganisms. The presence of metallic elements in the oral cavity may lead to the formation of electro-galvanic cells and, as a result, may induce corrosion. Transitional microorganisms such as sulfate-reducing bacteria may also be present among the metabolic microflora in the oral cavity, which can induce biological corrosion. Microorganisms that form a biofilm locally change the conditions on the surface of biomaterials and contribute to the intensification of the biocorrosion processes. These processes may enhance allergy to metals, inflammation, or cancer development. On the other hand, the presence of saliva and biofilm may significantly reduce friction and wear on enamel as well as on biomaterials. This work summarizes data on the influence of saliva and oral biofilms on the destruction of metallic biomaterials.