Topical gel of Metformin solid lipid nanoparticles: A hopeful promise as a dermal delivery system

Preparation and Characterization of Zein-Metformin/Gelatin Nanofibers by Coaxial Electrospinning

Metformin is a drug commonly used for the treatment of type 2 diabetes. However, it has been associated with damaging side effects when used over a long period of time. A potential solution to this problem is the implementation of a prolonged-release system for metformin, which would enhance the efficiency of the doses administered to patients. To achieve this, it is necessary to use materials compatible with humans. Electrospinning is an efficient technique that can be employed for this purpose, utilizing solvents that are safe for human use. Therefore, the objective of this study was to prepare and characterize a system for the prolonged release of metformin from zein and gelatin through coaxial electrospinning as well as to investigate its in vitro release. Metformin-loaded zein/gelatin coaxial nanofibers were prepared using the coaxial electrospinning technique and then characterized by morphological, structural, and thermal analysis. Morphologically, metformin-loaded zein/gelatin coaxial nanofibers were obtained with an average diameter of 322.6 ± 44.5 nm and a smooth surface. Fourier transform infrared spectroscopy (FTIR) analysis showed band shifts at a higher wavenumber due to drug-protein interactions by hydrogen bonding between N-H and C=O groups. Thermal gravimetric analysis (TGA) results suggested a possible interaction between materials due to an increase in the degradation temperatures of zein and gelatin when metformin was included. The transition of the crystallinity of metformin to the amorphous form was also confirmed by differential scanning calorimetry (DSC). Coaxial nanofibers exhibited an encapsulation efficiency of 66% and a profile release that showed an initial release of metformin (40%) in the first hour, followed by a gradual release until it reached equilibrium at 60 h and a cumulative release of 97% of metformin. It was concluded that using the coaxial electrospinning technique, it is possible to obtain nanofibers from polymeric solutions of zein and gelatin to encapsulate metformin, with a potential application as a prolonged-release system.

Development and Validation of a Robust RP-HPLC Method for the Simultaneous Analysis of Exemestane and Thymoquinone and Its Application to Lipid-Based Nanoformulations

The present study describes the development and validation of a simple and rapid HPLC method for the simultaneous quantification of exemestane and thymoquinone. The separation of both compounds was performed on a 5 μ C-18 column utilizing phase A as water/methanol (45:5 v/v) and phase B as acetonitrile (50 v/v) (total ratio of A/B = 40:60 v/v) in isocratic elution mode as the mobile phase at a flow rate of 0.8 mL/min. Further, the Box-Behnken design was used for optimizing the analytical method. The proposed method was validated for various parameters, and all parameters were found to be within an acceptable range. The simultaneous detection of both drugs was monitored at 243 nm with a retention time of 5.73 and 6.93 min, respectively. Moreover, the forced degradation studies were conducted under various stress conditions, and the relevance of the validated RP-HPLC method was further explored for the estimation of drugs from lipid-based nanoformulation. Taken together, the study construed the development of an efficient and robust method that could be used for the quantification of these agents in various in vitro as well as in vivo models.

Impact of grinding balls on the size reduction of Aprepitant in wet ball milling procedure

One of the widely used approaches for improving the dissolution of poorly water-soluble drugs is particle size reduction. Ball milling is a mechanical, top-down technique used to reduce particle size. The effect of ball number, ball size, and milling speed on the properties of milled Aprepitant is evaluated. A full factorial design was employed to investigate the influence of affecting factors on particle size reduction. The initial suspension was made by suspending the drug in distilled water using excipients followed by milling in a planetary ball mill. Ball size, ball number, and milling speed modulated particle size distribution of Aprepitant. Increasing the number of balls from minimum to maximum for each ball size led to approximately a 28% reduction in mean particle size, a 37% decrease in D90%, and a 25% decrease in the ratio of volume mean particle diameter to numeric mean particle diameter. On average, using 10 mm balls instead of 30 mm balls reduced mean particle size by 1.689 µm. As a result, ball size, ball number, and milling speed are three effective factors in the process of ball milling. By increasing the ball number and decreasing the ball size, efficient micronization of drug particles takes place and the particle size is more uniform.

Green Formulation of Spironolactone Loaded Chitosan-Coated Nano Lipid Carrier for Treatment of Acne Vulgaris: A Randomized Double-Blind Clinical Trial

Purpose

Spironolactone (SPN), which is classified as an anti-androgen, has demonstrated efficacy in treating acne. This study aimed to utilize ultrasonication to create a chitosan-coated nano lipid carrier (NLC) for enhancing the delivery of SPN to the skin and treating acne.

Methods

Various hydrophilic-lipophilic balance (HLB) values were investigated to optimize the SPN-NLCs. Photon correlation spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) were employed to characterize the solid state of SPN in nanoparticle form. Additionally, the optimized formulation was used in a double-blind, randomized clinical trial.

Results

Reducing the HLB of the surfactant mixtures resulted in a reduction in the size of SPNNLCs. The formula with the smallest particle diameter (238.4±0.74 nm) and the lowest HLB value (9.65) exhibited the highest encapsulation efficiency (EE) of 79.88±1.807%. Coating the optimized SPN-NLC with chitosan increased the diameter, polydispersity index (PDI), zeta potential (ZP), and EE. In vitro skin absorption studies demonstrated sustained release profiles for chitosan-coated SPN-NLC. In the double-blind trial, a gel containing chitosan-coated SPN-NLC effectively treated mild to moderate acne vulgaris, leading to improved healing and reduced lesion count after 8 weeks of therapy compared to the placebo. It successfully addressed both non-inflammatory and inflammatory lesions without adverse effects on the skin.

Conclusion

The findings indicate that chitosan-coated SPN-NLCs have the potential as nanoparticles for targeted SPN delivery to the skin, offering novel options for the treatment of acne vulgaris.

Metformin HCl-loaded transethosomal gel; development, characterization, and antidiabetic potential evaluation in the diabetes-induced rat model

Herein we designed, optimized, and characterized the Metformin Hydrochloride Transethosomes (MTF-TES) and incorporate them into Chitosan gel to develop Metformin Hydrochloride loaded Transethosomal gel (MTF-TES gel) that provides a sustained release, improved transdermal flux and improved antidiabetic response of MTF. Design Expert® software (Ver. 12, Stat-Ease, USA) was applied for the statistical optimization of MTF-TES. The formulation with Mean Particle Size Distribution (MPSD) of 165.4 ± 2.3 nm, Zeta Potential (ZP) of -21.2 ± 1.9 mV, Polydispersity Index (PDI) of 0.169 ± 0.033, and MTF percent Entrapment Efficiency (%EE) of 89.76 ± 4.12 was considered to be optimized. To check the chemical incompatibility among the MTF and other formulation components, Fourier Transform Infrared (FTIR) spectroscopy was performed and demonstrated with no chemical interaction. Surface morphology, uniformity, and segregation were evaluated through Transmission Electron Microscopy (TEM). It was revealed that the nanoparticles were spherical and round in form with intact borders. The fabricated MTF-TES has shown sustained release followed by a more pronounced effect in MTF-TES gel as compared to the plain MTF solution (MTFS) at a pH of 7.4. The MTF-TES has shown enhanced permeation followed by MTF-TES gel as compared to the MTFS at a pH of 7.4. In vivo antidiabetic assay was performed and results have shown improved antidiabetic potential of the MTF-TES gel, in contrast to MTF-gel. Conclusively, MTF-TES is a promising anti-diabetic candidate for transdermal drug delivery that can provide sustained MTF release and enhanced antidiabetic effect.

Eco-friendly preparation, characterization, evaluation of anti-melanogenesis/antioxidant effect and in vitro/in vivo safety profile of kojic acid loaded niosome as skin lightener preparation

In the current study, an ultrasonic approach (as green method) was utilized to prepared kojic acid niosome (kojisome) which aimed to increase the dermal delivery and improving anti-melanogenesis properties. The study's findings demonstrated that increasing cholesterol enhanced the mean particle size from 68.333 ± 5.686 nm to 325.000 ± 15.099 nm and entrapment efficiency 0% to 39.341 ± 4.126% of the kojisome. Cholesterol may enhance the number and rigidity of bilayers that induced a size enhancement and entrapment efficiency. The skin permeability test revealed that kojisome gel had more kojic acid in dermal layers (437.563 ± 29.857 μg/cm2 or 16.624 ± 1.379%) than kojic acid plain gel (161.290 ± 14.812 μg/cm2 or 6.128 ± 0.672%). The niosome's lipophilicity allowed for gradual penetration, possibly due to better contact with the skin layers. Also, the extended-release behavior of improved kojisome exhibited high safety profile and low side effect in In vitro cytotoxicity assay, dermal irritation test, and Histo-pathological evaluation. Furthermore, optimum kojisome inhibited melanin formation (53.093 ± 2.985% at 1000 µM) higher than free kojic acid (62.383 ± 1.958%) significantly (p < 0.05). In addition, Kojisome 6 inhibited L-dopa auto-oxidation greater extent (94.806 ± 2.411%) than pure kojic acid solution (72.953 ± 2.728%). Kojisome by delivering and targeting large amount of kojic acid on specific site causes high efficacy in inhibition of melanin synthesis. The observations of this study revealed that the produced kojisome might be used as a potential nano-vehicle for kojic acid dermal administration, thereby opening up innovative options for the treatment of hyperpigmentation problems.

Topical metformin 30% gel in the treatment of acne vulgaris in women, a split face, placebo-controlled study

Acne vulgaris (AV), a widely common disorder, that negatively affects the quality of life. Metformin is a relatively safe, cheap and well tolerated drug that is widely used in the treatment of Diabetes. Systemic metformin has demonstrated promising results in treating acne, while topically it was studied for melasma and recalcitrant central centrifugal cicatricial alopecia. To study the safety and efficacy of topical metformin 30% in the treatment of AV. Twenty-seven female AV patients were asked to blindly apply metformin and placebo gels to either side of the face for 12 weeks. AV lesion count was performed at baseline, at each visit and 4 weeks after end of treatment. At the end of the treatment period, the treated side showed significant improvement of comedones, papules and nodules but not pustules. Although, lesions count increased 1 month after stopping treatment, comedones and papules numbers were still significantly less on the metformin side compared to placebo. No side effects were reported. The limited number of patients studied and the limited follow-up period. The metformin effect was not studied on cellular and molecular levels. Topical metformin nanoemulsion gel can be a promising safe and effective treatment of AV.

Rivastigmine-DHA ion-pair complex improved loading in hybrid nanoparticles for better amyloid inhibition and nose-to-brain targeting in Alzheimer's

Rivastigmine hydrogen tartrate (RIV-HT) is given orally for Alzheimer's disease. However, oral therapy shows low brain bioavailability, short half-life and gastrointestinal-mediated adverse effects. RIV-HT intranasal delivery can avoid these side effects, but its low brain bioavailability remains challenging. These issues could be solved with hybrid lipid nanoparticles with enough drug loading to enhance RIV-HT brain bioavailability while avoiding oral route side effects. The RIV-HT and docosahexaenoic acid (DHA) ion-pair complex (RIV:DHA) was prepared to improve drug loading into lipid-polymer hybrid (LPH) nanoparticles. Two types of LPH, i.e., cationic (RIV:DHA LPH(+ve)) and anionic LPH (RIV:DHA LPH(-ve)) were developed. The effect of LPH surface charge on in-vitro amyloid inhibition, in-vivo brain concentrations and nose-to-brain drug targeting efficiency were investigated. LPH nanoparticles showed concentration dependant amyloid inhibition. RIV:DHA LPH(+ve) demonstrated relatively enhanced Aβ1-42 peptide inhibition. The thermoresponsive gel embedded with LPH nanoparticles improved nasal drug retention. LPH nanoparticles gel significantly improved pharmacokinetic parameters compared to RIV-HT gel. RIV:DHA LPH(+ve) gel showed better brain concentrations than RIV:DHA LPH(-ve) gel. The histological examination of nasal mucosa treated with LPH nanoparticles gel showed that the delivery system was safe. In conclusion, the LPH nanoparticle gel was safe and efficient in improving the nose-to-brain targeting of RIV, which can potentially be utilized in managing Alzheimer's.

Hyaluronic Acid-Coated Chitosan/Gelatin Nanoparticles as a New Strategy for Topical Delivery of Metformin in Melanoma

Metformin is a multipotential compound for treating diabetes II and controlling hormonal acne and skin cancer. This study was designed to enhance metformin skin penetration in melanoma using nanoparticles containing biocompatible polymers. Formulations with various concentrations of chitosan, hyaluronic acid, and sodium tripolyphosphate were fabricated using an ionic gelation technique tailored by the Box-Behnken design. The optimal formulation was selected based on the smallest particle size and the highest entrapment efficiency (EE%) and used in ex vivo skin penetration study. In vitro antiproliferation activity and apoptotic effects of formulations were evaluated using MTT and flow cytometric assays, respectively. The optimized formulation had an average size, zeta potential, EE%, and polydispersity index of 329 ± 6.30 nm, 21.94 ± 0.05 mV, 64.71 ± 6.12%, and 0.272 ± 0.010, respectively. The release profile of the optimized formulation displayed a biphasic trend, characterized by an early burst release, continued by a slow and sustained release compared to free metformin. The ex vivo skin absorption exhibited 1142.5 ± 156.3 μg/cm² of metformin deposited in the skin layers for the optimized formulation compared to 603.2 ± 93.1 μg/cm² for the free metformin. Differential scanning calorimetry confirmed the deformation of the drug from the crystal structure to an amorphous state. The attenuated total reflection Fourier transform infrared results approved no chemical interaction between the drug and other ingredients of the formulations. According to the MTT assay, metformin in nanoformulation exhibited a higher cytotoxic effect against melanoma cancer cells than free metformin (IC₅₀: 3.94 ± 0.57 mM vs. 7.63 ± 0.26 mM, respectively, P < 0.001). The results proved that the optimized formulation of metformin could efficiently decrease cell proliferation by promoting apoptosis, thus providing a promising strategy for melanoma therapy.

The effects of Lavandula angustifolia essential oil on analgesic effects and percutaneous absorption of naproxen sodium gel; an in vivo and in vitro study

The percutaneous bioavailability of naproxen is low and several technologies have been utilized to overcome the problem. Although, some studies have reported the permeation-enhancing properties of natural essential oils, no research has reflected the effectiveness of Lavandula angustifolia essential oil (LAEO) on increasing the percutaneous absorption of naproxen sodium from a topical gel. Therefore, the present study was designed to investigate whether LAEO increased the percutaneous absorption and the analgesic effects of naproxen sodium topical gel. In the present study, naproxen topical gel was formulated using carbopol 940 (a gelling agent) and several vehicles such as PEG 400, ethanol, and water and the properties of gels were measured. Percutaneous absorption-enhancing properties of LAEO were measured too. Based on our data, the essential oil-containing formulation of naproxen represented greater penetration into (222.19 ± 24.87 vs. 107.65 ± 6.38 μg/cm² ), and also across (22.07 ± 4.42 vs. 13.14 ± 2.87 μg/cm² ) skin layers compared to the naproxen gel. Additionally, a significant analgesic property was observed in the naproxen topical gel containing 0.5% essential oil during both first and late phases of formalin test, as well as the late phase of tail-flick test. It could be concluded that LAEO significantly enhanced naproxen percutaneous absorption and also its analgesic effects.

The development of a solid lipid nanoparticle (SLN)-based lacticin 3147 hydrogel for the treatment of wound infections

Chronic wounds affect millions of people globally. This number is set to rise with the increasing incidence of antimicrobial-resistant bacterial infections, such as methicillin-resistant Staphylococcus aureus (MRSA), which impair the healing of chronic wounds. Lacticin 3147 is a two-peptide chain bacteriocin produced by Lactococcus lactis that is active against S. aureus including MRSA strains. Previously, poor physicochemical properties of the peptides were overcome by the encapsulation of lacticin 3147 into solid lipid nanoparticles. Here, a lacticin 3147 solid lipid nanoparticle gel is proposed as a topical treatment for S. aureus and MRSA wound infections. Initially, lacticin 3147's antimicrobial activity against S. aureus was determined before encapsulation into solid lipid nanoparticles. An optimised gel formulation with the desired physicochemical properties for topical application was developed, and the lacticin-loaded solid lipid nanoparticles and free lacticin 3147 aqueous solution were incorporated into separate gels. The release of lacticin 3147 from both the solid lipid nanoparticle and free lacticin gels was measured where the solid lipid nanoparticle gel exhibited increased activity for a longer period (11 days) compared to the free lacticin gel (9 days). Both gels displayed potent activity ex vivo against S. aureus-infected pig skin with significant bacterial eradication (> 75%) after 1 h. Thus, a long-acting potent lacticin 3147 solid lipid nanoparticle gel with the required physicochemical properties for topical delivery of lacticin 3147 to the skin for the potential treatment of S. aureus-infected chronic wounds was developed.

Monoolein-based nanodispersions for cutaneous co-delivery of methylene blue and metformin: Thermal and structural characterization and effects on the cutaneous barrier, skin penetration and cytotoxicity

This study evaluated the potential of monoolein (MO)-based nanodispersions to promote the cutaneous co-delivery of metformin (MET) and methylene blue (MB) for the treatment of non-melanoma skin cancer. MO-based nanodispersions were obtained using Kolliphor® P407 (KP) and/or sodium cholate (CH), and characterized concerning the structure, thermal stability, ability to disrupt the skin barrier, cutaneous permeation and retention of MB and MET. Additionally, the cytotoxic effect of MO nanodispersions-mediated combination therapy using MET and MB in A431 cells was evaluated. The nanodispersions exhibited nanometric size (<200 nm) and thermal and physical stability. Small angle X-ray scattering studies revealed multiple structures depending on composition. They were able to interact with stratum corneum lipid structure, increasing its fluidity. The effect of MO-nanodispersions on topical/transdermal delivery of MB and MET was composition-dependent. Nanodispersions with low MO content (5 %) and stabilized with KP and CH (0.05-0.10 %) were the most promising, enhancing the cutaneous delivery of MB and MET by 1.9 to 2.2-fold and 1.4 to 1.7-fold, respectively, compared to control. Cytotoxic studies revealed that the most promising MO nanodispersion-mediated combination therapy using MET and MB (1:1) reduced the IC₅₀ by 24-fold, compared to MB solution, and a further reduction (1.5-fold) was observed by MB photoactivation.

Current Advances in Lipid Nanosystems Intended for Topical and Transdermal Drug Delivery Applications

Skin delivery is an exciting and challenging field. It is a promising approach for effective drug delivery due to its ease of administration, ease of handling, high flexibility, controlled release, prolonged therapeutic effect, adaptability, and many other advantages. The main associated challenge, however, is low skin permeability. The skin is a healthy barrier that serves as the body's primary defence mechanism against foreign particles. New advances in skin delivery (both topical and transdermal) depend on overcoming the challenges associated with drug molecule permeation and skin irritation. These limitations can be overcome by employing new approaches such as lipid nanosystems. Due to their advantages (such as easy scaling, low cost, and remarkable stability) these systems have attracted interest from the scientific community. However, for a successful formulation, several factors including particle size, surface charge, components, etc. have to be understood and controlled. This review provided a brief overview of the structure of the skin as well as the different pathways of nanoparticle penetration. In addition, the main factors influencing the penetration of nanoparticles have been highlighted. Applications of lipid nanosystems for dermal and transdermal delivery, as well as regulatory aspects, were critically discussed.

Development of Solid Lipid Nanoparticle-Loaded Polymeric Hydrogels Containing Antioxidant and Photoprotective Bioactive Compounds of Safflower (Carthamus tinctorius L.) for Improved Skin Delivery

Safflower (Carthamus tinctorius L.) is a potent natural antioxidant because of active compounds such as quercetin (QU) and luteolin (LU). These components prevent damage to the skin caused by free radicals from UV rays. However, due to the poor solubility and transdermal permeation, the effectiveness of the compounds in showing their activity was limited. In this study, we develop solid lipid nanoparticle (SLN)-based hydrogel formulations to enhance the solubility and penetration of two bioactive compounds found in safflower petals extract (SPE). The hot emulsification-ultrasonication method was used to produce SLNs, and to obtain high antioxidant activity, 100% v/v ethanol was used in the extraction procedure. The results showed that this approach could encapsulate >80% of both QU and LU. Moreover, Fourier transform infrared (FTIR), differential scanning calorimetry (DSC), and powder X-ray diffraction (PXRD) spectra indicated that most of the QU and LU were trapped in a lipid matrix and dispersed homogeneously at the molecular level, increasing the solubility. Additionally, SLN-hydrogel composites are able to release two lipophilic bioactive compounds for 24 h, which also demonstrated increased skin retention and penetrability of the QU and LU up to 19-fold. In vitro blood biocompatibility showed that no hemolytic toxicity was observed below 500 μg/mL. Accordingly, the formulation was considered safe for use. Sun protective factor (SPF) test shows a value above 15, showing an excellent promising application as the photoprotective agent to prevent symptoms associated with photoinduced skin aging.

The Human Dermis as a Target of Nanoparticles for Treating Skin Conditions

Skin has a preventive role against any damage raised by harmful microorganisms and physical and chemical assaults from the external environment that could affect the body's internal organs. Dermis represents the main section of the skin, and its contribution to skin physiology is critical due to its diverse cellularity, vasculature, and release of molecular mediators involved in the extracellular matrix maintenance and modulation of the immune response. Skin structure and complexity limit the transport of substances, promoting the study of different types of nanoparticles that penetrate the skin layers under different mechanisms intended for skin illness treatments and dermo-cosmetic applications. In this work, we present a detailed morphological description of the dermis in terms of its structures and resident cells. Furthermore, we analyze the role of the dermis in regulating skin homeostasis and its alterations in pathophysiological conditions, highlighting its potential as a therapeutic target. Additionally, we describe the use of nanoparticles for skin illness treatments focused on dermis release and promote the use of metal-organic frameworks (MOFs) as an integrative strategy for skin treatments.

Development of Alectinib-Suspended SNEDDS for Enhanced Solubility and Dissolution

Alectinib hydrochloride (ALH), a tyrosine kinase inhibitor, is a practically water-insoluble drug classified as BCS class IV. The present study aimed to develop novel suspended self-nanoemulsifying drug delivery system (Su-SNEDDS) to enhance the solubility and dissolution rate. The Su-SNEDDS was prepared by saturation and suspension of ALH in SNEDDS with ultrasonication energy. According to evaluation by the dispersion test and the results of particle size analysis, the selected SNEDDS composed of Kolliphor HS 15 and Capmul MCM C8 as surfactant and oil, respectively, showed a complete dissolution within 30 min. However, the SNEDDS loaded and solubilized only small amount of ALH (<0.6%, w/w). On the other hand, 10% ALH-loaded Su-SNEDDS containing small and micronized ALH particles of <5 μm had about 20-fold higher ALH-loading% than the SNEDDS and reached a 100% dissolution rate within 30 min in 1% sodium lauryl sulfate (SLS) pH 1.2 buffer. In the dispersion test and microscopic observation, micronized ALH particles in the Su-SNEDDS were readily dispersed in the dissolution medium with spontaneous nanoemulsion formation and instantly solubilized with the aid of SLS. Taken together, our results suggest that the Su-SNEDDS would be a potent oral dosage form to enhance the solubilization and dissolution rate of ALH in a new technological way.

Advances and future perspectives in epithelial drug delivery

Epithelial surfaces protect exposed tissues in the body against intrusion of foreign materials, including xenobiotics, pollen and microbiota. The relative permeability of the various epithelia reflects their extent of exposure to the external environment and is in the ranking: intestinal≈ nasal ≥ bronchial ≥ tracheal > vaginal ≥ rectal > blood-perilymph barrier (otic), corneal > buccal > skin. Each epithelium also varies in their morphology, biochemistry, physiology, immunology and external fluid in line with their function. Each epithelium is also used as drug delivery sites to treat local conditions and, in some cases, for systemic delivery. The associated delivery systems have had to evolve to enable the delivery of larger drugs and biologicals, such as peptides, proteins, antibodies and biologicals and now include a range of physical, chemical, electrical, light, sound and other enhancement technologies. In addition, the quality-by-design approach to product regulation and the growth of generic products have also fostered advancement in epithelial drug delivery systems.

Evaluation of Metformin Hydrochloride Tailoring Bilosomes as an Effective Transdermal Nanocarrier

Introduction

Metformin hydrochloride (metformin HCL), a first-line drug treating diabetes type II, was known to cause severe gastritis, so seeking a non-oral dosage form was the new trend. Bilosomes are bilayer nano-vesicles of non-ionic surfactants embodying bile salts. In our study, bilosomes were investigated as an acceptable novel carrier for active targeting transdermal delivery of metformin HCL, circumventing its side effects.

Methods

Twelve bilosome formulations were prepared with solvent evaporation method with slight modification according to a 3¹.2² full factorial design, and the optimized formulation was determined using Design -Expert 13 software (Stat-Ease, Inc., Minneapolis, Minnesota, USA) studying the effect of surfactant and bile salt types on the entrapment efficiency (EE), vesicle size (VS), polydispersity index (PDI), zeta potential (ZP), percentage of drug released within 24 h (R), and flux of drug permeated within 6 h (Jss) of vesicles. In addition, the optimized formulation was further evaluated to Fourier-transform infrared spectroscopy (FTIR), deformability index (DI), and transmission electron microscope (TEM) to ensure bilosomes formation, elasticity, and spherical shape, respectively.

Results

The resulting vesicles publicized EE from 56.21% to 94.21%, VS from 183.64 to 701.8 nm, PDI values oscillating between 0.33 and 0.53, ZP (absolute value) from 29 to 44.2 mV, biphasic release profile within 24 h from 60.62 and up to 75.28%, and permeation flux enhancement (198.79–431.91 ng cm ⁻² h⁻¹) in comparison with the non-formulated drug (154.26 ng cm ⁻² h⁻¹). Optimized formulation was found to be F8 with EE = 79.49%, VS = 237.68 nm, ZP = 40.9 mV, PDI = 0.325, R = 75.28%, Jss = 333.45 ng cm⁻² h⁻¹ and DI = 6.5 with spherical self-closed non-aggregated vesicles and non-superimposed bands of its components in the FTIR.

Conclusion

Overall results showed that bilosome incorporation of metformin HCL improved permeation and offered a new nano-carrier for active transdermal delivery.

Point your SmartPhone at the code above. If you have a QR code reader the video abstract will appear. Or use:

https://youtu.be/a-_3Fxhau2E

Potential enhancement of metformin hydrochloride in solidified reverse micellar solution-based PEGylated lipid nanoparticles targeting therapeutic efficacy in diabetes treatment

Metformin hydrochloride (MH) is a widely used oral biguanide antihyperglycemic (antidiabetic) drug with poor bioavailability which necessitates the development of novel drug delivery systems such as PEGylated solid lipid nanoparticles for improving its therapeutic activity. The aim of this study was to formulate, characterize and evaluate in vitro and in vivo pharmacodynamic properties of metformin-loaded PEGylated solid lipid nanoparticles (PEG-SLN) for improved delivery of MH. The lipid matrices (non-PEGylated lipid matrix and PEGylated lipid matrices) used in the formulation of both non-PEGylated (J0) and PEGylated SLNs (J10, J20, J40) were prepared by fusion using beeswax and Phospholipon ® 90H at 7:3 ratio with or without polyethylene glycol (PEG) 4000 (0, 10, 20 and 40% w/w), respectively. Representative lipid matrices (LM and PEG-LM) were loaded with MH by fusion and then characterized by differential scanning calorimetry (DSC) and Fourier transform infrared (FT-IR) spectroscopy. The PEG-SLNs were prepared by high shear hot homogenization using the lipid matrices (5% w/w), drug (MH) (1.0% w/w), sorbitol (4% w/w) (cryoprotectant), Tween ® 80 (2% w/w) (surfactant) and distilled water (q.s to 100% w/w) (vehicle). The non-PEGylated and PEGylated SLNs (J0, J10, J20, J40)) were characterized with respect to encapsulation efficiency (EE%), loading capacity (LC), morphology by scanning electron microscopy (SEM), mean particle size (Zav) and polydispersity indices (PDI) by photon correlation spectroscopy (PCS), compatibility by FT-IR spectroscopy and in vitro drug release in biorelevant medium. Thereafter, in vivo antidiabetic study was carried out in alloxanized rats' model and compared with controls (pure sample of MH and commercial MH- Glucophage®)). Solid state characterizations indicated the amorphous nature of MH in the drug loaded-lipid matrices. The PEG-SLNs were mostly smooth and spherical nanoformulations with Zav and PDI of 350.00 nm and 0.54, respectively, for non-PEGylated SLNs, and in the range of 386.80-783.10 nm and 0.592 to 0.752, respectively, for PEGylated SLNs. The highest EE% and LC were noted in batch J20 and were 99.28% and 16.57, respectively. There was no strong chemical interaction between the drug and excipients used in the preparation of the formulations. The PEGylated SLN (batch J40) exhibited the highest percentage drug released (60%) at 8 h. The PEGylated SLNs showed greater hyperglycemic control than the marketed formulation (Glucophage ®) after 24 h. This study has shown that metformin-loaded PEGylated solid lipid nanoparticles could be employed as a potential approach to improve the delivery of MH in oral diabetic management, thus encouraging further development of the formulations.

Formulation and assessment of hydroxyzine HCL solid lipid nanoparticles by dual emulsification technique for transdermal delivery

Hydroxyzine HCL (HHCL) is an antihistamine, used for the treatment of allergic skin conditions. The purpose of this study was to achieve a dual phase drug delivery rate across the intact skin, to enhance HHCL permeation through the stratum corneum, to assess the peripheral H₁-antihistaminic activity and the extent to which HHCL was systemically absorbed from transdermal gel loaded with solid lipid nanoparticles (SLNs), as well as to avoid its extreme bitterness. According to 2³ factorial design, eight formulations of HHCL-SLNs were prepared by the double emulsification method. Lipid type (X_A), surfactant concentration (X_B) and co-surfactant concentration (X_C) were the independent variables. All formulations were characterized for their surface morphology, particle size, entrapment efficiency and in-vitro drug release study. The optimized formula that provides greater desirability was then incorporated into the transdermal gel. In addition, the efficacy of the developed gel was tested in-vivo using 2,4-Dinitrochlorobenzene induced atopic dermatitis as lesion model in mice. F4 showed an average diameter 111 nm ± 0.03, zeta potential - 30 MV ± 2.4 and EE 75.2% ± 4.4. TEM images showed spherical, smooth morphology with uniform particles distribution. In-vivo study demonstrated potent antipruritic efficacy of transdermal gel in atopic dermatitis such as induced lesions compared to HHCL gel. Hence, HHCL solid lipid nanoparticles transdermal gel may be considered as potential for delivery of HHCL and alternatively to traditional oral use.

Nanostructured Lipid Carriers for the Formulation of Topical Anti-Inflammatory Nanomedicines Based on Natural Substances

The main function of the skin is to protect the body from the external environment. However, the skin can undergo inflammatory processes, due to genetic, hormonal, or environmental factors. When the defense system is overloaded, there is an increase in pro-inflammatory mediators and reactive oxygen species (ROS), which results in skin disorders. Among the substances used to treat these inflammatory processes, many natural substances with anti-inflammatory and antioxidant properties are being studied: nature is yet an abundant source to obtain diverse pharmacological actives. The treatment of skin diseases is usually focused on topical application, as it reduces the risk of systemic side effects and prevents drug degradation by first-pass metabolism. Thus, the properties of drug delivery vehicles can facilitate or inhibit its permeation. Due to the hydrophobic nature of the skin, a promising strategy to improve dermal drug penetration is the use of lipid-based nanoparticles, such as nanostructured lipid carriers (NLC). Therefore, in this review, we present NLC as a tool to improve dermal administration of natural substances with anti-inflammatory properties.

Innovative topical niosomal gel formulation containing diclofenac sodium (niofenac)

The purpose of this research was to enhance the transdermal delivery of diclofenac sodium niosomal formulations. To characterise the obtained niosomes, SEM, XRPD, DSC and ATR-FTIR were employed. The size of the niosomes increased from 158.00 ± 6.17 to 400.87 ± 4.99 nm when cholesterol was incorporated into the formulations. It was observed that the zeta potential of niofenac varies from -25.40 ± 1.352 to -43.13 ± 1.171 mV when the cholesterol percentage decreased from 2% to 0.2%. The higher entrapment efficiency percentage (63.70 ± 0.18%) was obtained for the formulations with larger particle sizes and higher cholesterol content. The optimised niofenac formulation showed a controlled release fashion where 61.71 ± 0.59% of the drug released within 24 h. The results showed that the value of permeated diclofenac sodium through the skin layers was higher for the niofenac gel formulation (242.3 ± 31.11 µg/cm²) compared to simple gel formulation (127.40 ± 27.80 µg/cm²). Besides, niofenac formulation outperformed the anti-inflammatory activities in the formalin test compared to the control and diclofenac simple gel group. The licking time was significantly lower in both early (40.2 ± 7.3 s) and late stages (432.4 ± 31.7 s) for niofenac compared to conventional formulation (early stage 130.4 ± 8.73 s and late stage 660.6 ± 123.73 s). This study indicates that niosomal formulations can improve drug therapeutic effects by increasing drug delivery to specific sites.

The impact of chemical engineering and technological advances on managing diabetes: present and future concepts

Monitoring blood glucose levels for diabetic patients is critical to achieve tight glycaemic control. As none of the current antidiabetic treatments restore lost functional β-cell mass in diabetic patients, insulin injections and the use of insulin pumps are most widely used in the management of glycaemia. The use of advanced and intelligent chemical engineering, together with the incorporation of micro- and nanotechnological-based processes have lately revolutionized diabetic management. The start of this concept goes back to 1974 with the description of an electrode that repeatedly measures the level of blood glucose and triggers insulin release from an infusion pump to enter the blood stream from a small reservoir upon need. Next to the insulin pumps, other drug delivery routes, including nasal, transdermal and buccal, are currently investigated. These processes necessitate competences from chemists, engineers-alike and innovative views of pharmacologists and diabetologists. Engineered micro and nanostructures hold a unique potential when it comes to drug delivery applications required for the treatment of diabetic patients. As the technical aspects of chemistry, biology and informatics on medicine are expanding fast, time has come to step back and to evaluate the impact of technology-driven chemistry on diabetics and how the bridges from research laboratories to market products are established. In this review, the large variety of therapeutic approaches proposed in the last five years for diabetic patients are discussed in an applied context. A survey of the state of the art of closed-loop insulin delivery strategies in response to blood glucose level fluctuation is provided together with insights into the emerging key technologies for diagnosis and drug development. Chemical engineering strategies centered on preserving and regenerating functional pancreatic β-cell mass are evoked in addition as they represent a permanent solution for diabetic patients.

Drug-Excipients Compatibility Studies in Proniosomal Formulation: A Case Study with Resveratrol

Proniosomal drug delivery system is one of the advancements in nanotechnology. Similarly to traditional dosage forms, chemical and physical compatibility of proniosomes components with the active ingredient(s) is a key step in the preformulation process of such systems. In this work, the compatibility of resveratrol with selected excipients in the development of proniosomal formulation was investigated by thermal and spectroscopic techniques. To evaluate the drug-excipient compatibility, different techniques such as differential scanning calorimetric study, attenuated total reflectance Fourier transform infrared spectroscopy study and powder X-ray diffraction were adopted. The results showed that the excipients used in the formulation were compatible with resveratrol.

Recent Advances in Nanomaterials for Dermal and Transdermal Applications

The stratum corneum, the most superficial layer of the skin, protects the body against environmental hazards and presents a highly selective barrier for the passage of drugs and cosmetic products deeper into the skin and across the skin. Nanomaterials can effectively increase the permeation of active molecules across the stratum corneum and enable their penetration into deeper skin layers, often by interacting with the skin and creating the distinct sites with elevated local concentration, acting as reservoirs. The flux of the molecules from these reservoirs can be either limited to the underlying skin layers (for topical drug and cosmeceutical delivery) or extended across all the sublayers of the epidermis to the blood vessels of the dermis (for transdermal delivery). The type of the nanocarrier and the physicochemical nature of the active substance are among the factors that determine the final skin permeation pattern and the stability of the penetrant in the cutaneous environment. The most widely employed types of nanomaterials for dermal and transdermal applications include solid lipid nanoparticles, nanovesicular carriers, microemulsions, nanoemulsions, and polymeric nanoparticles. The recent advances in the area of nanomaterial-assisted dermal and transdermal delivery are highlighted in this review.

Developing an analytical method by HPLC for simultaneous quantification of methylene blue and metformin applied to in vitro skin permeation and retention studies

The aim of this study was to develop an HPLC method for simultaneous quantification of metformin (MET) and methylene blue (MB) in in vitro skin permeation/retention studies, in which retention was evaluated in the different layers of the skin [stratum corneum (SC) and the viable epidermis + dermis (VE + D)]. The method was validated considering the following parameters: specificity, linearity, quantitation limit (LOQ), recovery, precision and accuracy. Calibration curves were obtained using the following six matrices: methanol, water, methanolic extracts from the SC and VE + D spiked with the drugs and drugs extracted from the SC and VE + D. The precision, accuracy and LOQ of the method were evaluated in water and in VE + D and SC, applying the drug extraction process. The results show that the method is selective and linear for both drugs. The precision and accuracy values, independent of matrix and drug, were below the limit of 15%. The LOQ of MB was defined as 0.4 μg/ml in the VE + D and SC and 0.8 μg/ml in water. The LOQ of MET was defined as 0.8 μg/ml in the VE + D and SC and 0.4 μg/ml in the water. The recovery of the method was adequate, consistent and reproducible for the concentration range of 0.4-10 μg/ml for MB (73.3-92.1%) and 0.8-10.0 μg/mL for MET (72.4-94.4%). This method has a potential application in the development of formulation for skin delivery of MB and MET.

Solid Lipid Nanoparticles for Topical Drug Delivery: Mechanisms, Dosage Form Perspectives, and Translational Status

Solid lipid nanoparticles (SLNs) have shown potential as a novel lipid-based drug delivery system for the topical applications of innumerable therapeutic compounds. However, the mechanisms governing the absorption and cellular uptake of SLNs through topical route, along with the mechanism of drug release from SLNs are still ambiguous, and require further investigation. In addition, the selection of an appropriate dosage form/formulation base is essential for ease of application of SLNs and to enhance dermal and transdermal delivery. Upscaling and regulatory approvals are other challenges that may impede the clinical translation of SLNs. Therefore, this review focusses on different mechanisms involved in skin penetration and cellular uptake of SLNs. This is followed by a comprehensive discussion on the physicochemical properties of SLNs including various formulation and dosage form factors, which might influence the absorption of SLNs through the skin. Finally, translational status with respect to scale-up and regulatory aspects are also discussed. This review will be useful to researchers with an interest in topical applications of SLNs for the efficient delivery of drugs and cosmetics.

PEG Graft Polymer Carriers of Antioxidants: In Vitro Evaluation for Transdermal Delivery

The in vitro biochemical evaluation of the applicability of polymers carrying active substances (micelles and conjugates) was carried out. Previously designed amphiphilic graft copolymers with retinol or 4-n-butylresorcinol functionalized polymethacrylate backbone and poly(ethylene glycol) (PEG) side chains that included Janus-type heterografted copolymers containing both PEG and poly(ε-caprolactone) (PCL) side chains were applied as micellar carriers. The polymer self-assemblies were convenient to encapsulate arbutin (ARB) as the selected active substances. Moreover, the conjugates of PEG graft copolymers with ferulic acid (FA) or lipoic acid (LA) were also investigated. The permeability of released active substances through a membrane mimicking skin was evaluated by conducting transdermal tests in Franz diffusion cells. The biological response to new carriers with active substances was tested across cell lines, including normal human dermal fibroblasts (NHDF), human epidermal keratinocyte (HaCaT), as well as cancer melanoma (Me45) and metastatic human melanoma (451-Lu), for comparison. These polymer systems were safe and non-cytotoxic at the tested concentrations for healthy skin cell lines according to the MTT test. Cytometric evaluation of cell cycles as well as cell death defined by Annexin-V apoptosis assays and senescence tests showed no significant changes under action of the delivery systems, as compared to the control cells. In vitro tests confirmed the biochemical potential of these antioxidant carriers as beneficial components in cosmetic products, especially applied in the form of masks and eye pads.

Topical Gel of Vitamin A Solid Lipid Nanoparticles: A Hopeful Promise as a Dermal Delivery System

Purpose: The Objective of the present investigation was to enhance the skin delivery of vitamin A (Vit A) via producing solid lipid nanoparticles (SLNs) through ultrasonication technique.

Methods: For achieving optimal skin delivery, impacts of two surfactants ratio of Tween80:Span80 on nanoparticles (NPs) features and the respective functions were examined. Powder X-ray diffractometer (PXRD), photon correlation spectroscopy, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), transmission electron microscopy (TEM), and differential scanning calorimetry (DSC) were applied for characterizing the solid state of Vit A in the SLN.

Results: Results showed that size of the NPs is usually enhanced by adding co-emulsifier (Span80). Notably, minimum NPs size (64.85±4.259 nm) was achieved while the hydrophilic-lipophilic balance (HLB) of the binary surfactants was 12.08, close to HLB of beeswax (HLB=12) as lipid matrix. Also, maximum entrapment efficiency (66.01±8.670%) was observed in the formulation. DSC thermogram indicated an amorphous form of Vit A in SLN. ATR-FTIR spectra of Vit A-SLN illustrated that prominent functional groups are found in the formulations that might be a sign of acceptable entrapment of Vit A in a lipid matrix. Moreover, ATR-FTIR studies showed no chemical interactions between Vit A and excipients. Skin irritation test proved the non-irritancy of Vit A-SLN2, when applied to the dorsal region of Wistar rats. Finally, any cellular toxicity was not seen for NPs.

Conclusion: It was found that the procured Vit A-SLNs could be utilized as potent carriers for the dermal delivery of Vit A.

Atorvastatin Solid Lipid Nanoparticles as a Promising Approach for Dermal Delivery and an Anti-inflammatory Agent

In the current research, the main focus was to overcome dermal delivery problems of atorvastatin. To this end, atorvastatin solid lipid nanoparticles (ATR-SLNs) were prepared by ultra-sonication technique. The prepared SLNs had a PDI value of ≤ 0.5, and the particle size of nanoparticles was in the range 71.07 ± 1.72 to 202.07 ± 8.40 nm. It was noticed that, when the concentration of lipid in ATR-SLNs increased, the size of nanoparticles and drug entrapment efficiency were also increased. Results showed that a reduction in the HLB of surfactants used in the preparation of SLN caused an increase in the particle size, zeta potential (better stability), and drug entrapment efficiency. Despite Tween and Span are non-ionic surfactants, SLNs containing these surfactants showed a negative zeta potential, and the absolute zeta potential increased when the concentration of Span 80 was at maximum. DSC thermograms, FTIR spectra, and x-ray diffraction (PXRD) pattern showed good incorporation of ATR in the nanoparticles without any chemical interaction. In vitro skin permeation results showed that SLN containing atorvastatin was capable of enhancing the dermal delivery of atorvastatin where a higher concentration of atorvastatin can be detected in skin layers. This is a hopeful promise which could be developed for clinical studies of the dermal delivery of atorvastatin nanoparticles as an anti-inflammatory agent.

Selection of Cryoprotectant in Lyophilization of Progesterone-Loaded Stearic Acid Solid Lipid Nanoparticles

Cryoprotectants are often required in lyophilization to reduce or eliminate agglomeration of solute or suspended materials. The aim of this study was to select a cryoprotecting agent and optimize its concentration in a solid lipid nanoparticle formulation. Progesterone-loaded stearic acid solid lipid nanoparticles (SA-P SLNs) were prepared by hot homogenization with high speed mixing and sonication. The stearic acid content was 4.6% w/w and progesterone was 0.46% w/w of the initial formulation. Multiple surfactants were evaluated, and a lecithin and sodium taurocholate system was chosen. Three concentrations of surfactant were then evaluated, and a concentration of 2% w/w was chosen based on particle size, polydispersity, and zeta potential. Agglomeration of SA-P SLNs after lyophilization was observed as measured by increased particle size. Dextran, glycine, mannitol, polyvinylpyrrolidone (PVP), sorbitol, and trehalose were evaluated as cryoprotectants by both an initial freeze–thaw analysis and after lyophilization. Once selected as the cryoprotectant, trehalose was evaluated at 5%, 10%, 15%, and 20% for optimal concentration, with 20% trehalose being finally selected as the level of choice. Evaluation by DSC confirmed intimate interaction between stearic acid and progesterone in the SA-P SLNs, and polarized light microscopy shows successful lyophilization of the trehalose/SA-P SLN. A short term 28-day stability study suggests the need for refrigeration of the final lyophilized SA-P SLNs in moisture vapor impermeable packaging.

Design, fabrication, and optimization of a dual function three-layer scaffold for controlled release of metformin hydrochloride to alleviate fibrosis and accelerate wound healing

Abnormal wound healing caused by the over-expression of collagen and fibronectin leads to fibrosis, the major complication of all treatment modalities. A three-layer nanofiber scaffold was designed, optimized, and fabricated. This scaffold comprised two supportive polycaprolactone (PCL)-chitosan layers on the sides and a polyvinyl alcohol (PVA)-metformin hydrochloride (metformin-HCl) in the middle. The physico-chemical properties of scaffold, such as mechanical characteristics, degradation, swelling, and in-vitro drug release, were evaluated. The biological tests, including cell viability in response to metformin-HCl and Tween 80, scaffold biocompatibility, cell attachment, and antibacterial activity, were further conducted. The wound healing effect of scaffold loaded with metformin-HCl (MSc+Met) was assessed in donut-shaped silicone splints in rats. Histopathological and immunohistochemical evaluation as well as mRNA expression levels of fibrosis markers were also studied. SEM images indicated a uniform, bead-less morphology and high porosity. Surface modification of scaffold by Tween 80 improved the surface hydrophilicity and enhanced the adhesion and proliferation of fibroblasts. The scar area on day 15 in MSc+Met was significantly lower than that of other groups. Histopathological and immunohistochemical evaluation revealed that group MSc+Met was the best, having significantly lower inflammation, higher angiogenesis, the smallest scar width and depth, maximum epitheliogenesis score, and the most optimal modulation of collagen density. Local administration of metformin-HCl substantially down-regulated the expression of fibrosis-involved genes: transforming growth factor (TGF-β1), collagen type 1 (Col-I), fibronectin, collagen type 3 (Col-III), and alpha-smooth muscle actin (α-SMA). Inhibiting these genes alleviates scar formation but delays wound healing; thus, an engineered scaffold was used to prevent delay in wound healing. These results provided evidence for the first time to introduce an anti-fibrogenic slow-releasing scaffold, which acts in a dual role, both alleviating fibrosis and accelerating wound healing.

Metformin loaded cholesterol-lysine conjugate nanoparticles: A novel approach for protecting HDFs against UVB-induced senescence

Cellular senescence is one of the hallmarks of aging. Since senescence of dermal fibroblasts has been reported in vivo, reduction of the deleterious effects of these cells, has been considered an important intervention to counteract skin aging. Promising anti-aging effect of metformin has been reported. However, permeation of metformin due to its high hydrophilicity through skin epidermal barriers is limited. In this study, solid lipid nanoparticles (SLNs) of metformin were designed with the newly synthesized cholesterol-lysine conjugate as lipid for topical delivery of metformin. Characterization of SLNs strongly confirmed the effect of cholesterol-lysine conjugate on increasing entrapment of metformin. The designed SLNs with particle size of 283 nm and spherical morphology represented controlled drug release up to 18 days. Fluorescent tracking of SLNs on mice skin samples showed an increase in epidermal penetration. SLNs containing metformin showed anti-senescence effects on UVB-induced senescence of human dermal fibroblasts, this effect was confirmed by senescence-associated β-galactosidase staining, RT q-PCR and cell cycle analyses. Furthermore, our drug-free SLNs showed anti-senescence effects, suggesting that they can be a suitable carrier for phytochemicals with anti-aging effect or other hydrophilic compounds which have constraints permeating skin.

Solid Lipid Nanoparticles: A Promising Nanomaterial in Drug Delivery

The solid lipid nanoparticles (SLNs) usually consists of active drug molecules along with solid lipids, surfactants, and/or co-surfactants. They possess some potential features such as nano-size, surface with a free functional group to attach ligands, and as well they prove safe homing for both lipophilic as well as hydrophilic molecules. As far as synthesis is concerned, SLNs can be prepared by employing various techniques viz., homogenization techniques (e.g., high-pressure, high-speed, cold, or hot homogenization), spray drying technique, ultrasonication, solvent emulsification, double emulsion technique, etc. Apart from this, they are characterized by different methods for determining various parameters like particle-size, polydispersity-index, surface morphology, DSC, XRD, etc. SLNs show good stability as well as the ability for surface tailoring with the specific ligand, which makes them a suitable candidate in the therapy of numerous illnesses, especially in the targeting of the cancers. In spite of this, SLNs have witnessed their application via various routes e.g., oral, parenteral, topical, pulmonary, rectal routes, etc. Eventually, SLNs have also shown great potential for delivery of gene/DNA, vaccines, as well as in cosmeceuticals. Hence, SLNs have emerged as a promising nanomaterial for efficient delivery of various Active Pharmaceutical Ingredients (APIs).

Sonication-Assisted Production of Fosetyl-Al Nanocrystals: Investigation of Human Toxicity and In Vitro Antibacterial Efficacy against Xylella Fastidiosa

Recently, there is a growing demand in sustainable phytopathogens control research. Nanotechnology provides several tools such as new pesticides formulations, antibacterial nanomaterials and smart delivery systems. Metal nano-oxides and different biopolymers have been exploited in order to develop nanopesticides which can offer a targeted solution minimizing side effects on environment and human health. This work proposed a nanotechnological approach to obtain a new formulation of systemic fungicide fosetyl-Al employing ultrasonication assisted production of water dispersible nanocrystals. Moreover, chitosan was applicated as a coating agent aiming a synergistic antimicrobial effect between biopolymer and fungicide. Fosetyl-Al nanocrystals have been characterized by morphological and physical-chemical analysis. Nanotoxicological investigation was carried out on human keratinocytes cells through cells viability test and ultrastructural analysis. In vitro planktonic growth, biofilm production and agar dilution assays have been conducted on two Xylella fastidiosa subspecies. Fosetyl-Al nanocrystals resulted very stable over time and less toxic respect to conventional formulation. Finally, chitosan-based fosetyl-Al nanocrystals showed an interesting antibacterial activity against Xylella fastidiosa subsp. pauca and Xylella fastidiosa subsp. fastidiosa.