Direct electrochemistry of covalently immobilized hemoglobin on a naphthylimidazolium butyric acid ionic liquid/MWCNT matrix

In silico study of substrate chemistry effect on the tethering of engineered antibodies for SARS-CoV-2 detection: Amorphous silica vs gold

The influence of the properties of different solid substrates on the tethering of two antibodies, IgG1-CR3022 and IgG1-S309, which were specifically engineered for the detection of SARS-CoV-2, has been examined at the molecular level using conventional and accelerated Molecular Dynamics (cMD and aMD, respectively). Two surfaces with very different properties and widely used in immunosensors for diagnosis, amorphous silica and the most stable facet of the face-centered cubic gold structure, have been considered. The effects of such surfaces on the structure and orientation of the immobilized antibodies have been determined by quantifying the tilt and hinge angles that describe the orientation and shape of the antibody, respectively, and the dihedrals that measure the relative position of the antibody arms with respect to the surface. Results show that the interactions with amorphous silica, which are mainly electrostatic due to the charged nature of the surface, help to preserve the orientation and structure of the antibodies, especially of the IgG1-CR3022, indicating that the primary sequence of those antibodies also plays some role. Instead, short-range van der Waals interactions with the inert gold surface cause a higher degree tilting and fraying of the antibodies with respect to amorphous silica. The interactions between the antibodies and the surface also affect the correlation among the different angles and dihedrals, which increases with their strength. Overall, results explain why amorphous silica substrates are frequently used to immobilize antibodies in immunosensors.

Modification of glassy carbon electrode with manganese cobalt oxide-cubic like structures incorporated graphitic carbon nitride sheets for the voltammetric determination of 2,4,6 -trichlorophenol

Novel cube-like transition metal oxide embedded on graphitic carbon nitride (MCO@GCN) formed a hybrid composite via hydrothermal assisted sonochemical synthesis. The synthesized composite was examined with various physical characterizations such as morphological SEM, EDX, XRD, and FT-IR spectroscopy. The electrocatalytic activity of MCO@GCN composite was further investigated when used  to modify a glassy carbon electrode (GCE). The electrochemical sensor was investigated using modified MCO@GCN/GCE towards environmental pollutant 2,4,6-trichlorophenol (2,4,6-TCP) detection with at a potential of (+ 0.654 V vs Ag/AgCl) in pH-7. The structural features have favored a high charge transfer ratio with excellent conductivity which showed a low detection limit (LOD) of 0.0068 μM and sensitivity of 23.57 μA·μM^-1·cm^-2 comprising a wide linear working range of 0.01-1720 μM by using differential pulse voltammetry. Besides, the MCO@GCN/GCE displayed excellent selectivity , repeatability, reproducibility, storage, and operational stability. Notably, the proposed MCO@GCN/GCE was validated with different environmental samples (tap, river, and industrial water) with RSD 0.62-2.86% and 96.51-99.66% (n = 3) recovery.

Efficient Electrochemical Detection of Hydrogen Peroxide Based on Silver-Centered Preyssler-Type Polyoxometalate Hybrids

Four polyoxometalate (POM)-based organic-inorganic hybrid compounds, namely, (H₂bimb)₆H₈[((Mn(H₂O)₃(μ-bimb))_0.5(Mn(H₂O)₄)(Mn(H₂O)₅)_0.5(AgP₅W₃₀O₁₁₀))₂]·29H₂O (1), [(Cu(Hbimb)(H₂O)₂(μ-bimb)Cu(Hbimb)(H₂O))(Cu(H₂O)₂(μ-bimb)Cu(H₂O)₃)((Cu(H₂O)₂)_0.5(μ-bimb)(Cu(H₂O)₃)_0.5)H₂(AgP₅W₃₀O₁₁₀)]·12.5H₂O (2), (H₂bimb)₂H[(Zn(Hbimb)(H₂O)₄(Zn(Hbimb)(H₂O)₂)_0.5)₂(AgP₅W₃₀O₁₁₀)]·12H₂O (3), and (H₂bimb)₃H₂[(Ag(H₂O)₂)_0.5(Ag(Hbimb)Ag(Hbimb)(μ-bimb)Ag)(Ag(H₂O)₂)_0.5(AgP₅W₃₀O₁₁₀)]·7H₂O (4) (bimb = 1,4-bis(1H-imidazol-1-yl)benzene), were hydrothermally synthesized using a silver-centered Preyssler-type POM K₁₄[AgP₅W₃₀O₁₁₀]·18H₂O (abbreviated as K-{AgP₅W₃₀}) as a precursor. In 1-4, {AgP₅W₃₀} clusters integrating the merits of Ag⁺ and {P₅W₃₀} units are modified by different transition metal (TM)-organic fragments to extend the structures into three-dimensional frameworks. As nonenzymatic electrochemical sensor materials, 1-4 show good electrocatalytic activity, high sensitivity, and a low detection limit for detecting hydrogen peroxide (H₂O₂); 4 possesses the highest sensitivity of 195.47 μA·mM^-1·cm^-2 for H₂O₂ detection. Most importantly, the average level of H₂O₂ detection of these {AgP₅W₃₀}-based materials outperforms that of Na-centered Preyssler-type {NaP₅W₃₀} and most Keggin-type POM-based materials. The performances of such {AgP₅W₃₀} materials mainly stem from the unique advantage of high-negatively charged {AgP₅W₃₀} clusters together with the good synergistic effect between {AgP₅W₃₀} and TMs. This work expands on the research of high-efficiency POM-based nonenzymatic electrochemical H₂O₂ sensors using Ag-containing POMs with high negative charges, which is also of great theoretical and practical significance to carry out health monitoring and environmental analysis.

Biorecognition of hydrogen peroxide using a novel electrochemical platform designed with Glossoscolex paulistus giant hemoglobin

The giant extracellular hemoglobin of the annelid Glossoscolex paulistus (HbGp; 3.6 MDa) is a valuable and underexplored supramolecular hemoprotein system for the biorecognition of reactive oxygen species. In this work, an efficient and simple electrochemical platform was designed for analyzing H₂O₂, using HbGp covalently immobilized on Nafion®-modified glassy carbon electrode, named as HbGp/Nafion/GCE. Voltammetric and spectroscopic studies revealed the importance of prior modification of the electrodic support with the conducting polymer to obtain satisfactory hemoglobin electroactivity, as well as a biocompatible microenvironment for its immobilization. In terms of biological activity, it was observed a greater reactivity of the biomolecule in acidic medium, enabling the detection of the analyte by a quasi-reversible mechanism, whose kinetics was limited by analyte diffusion. In the presence of H₂O₂, the native structure of hemoglobin (oxy-HbGp (Fe²⁺)) oxidizes to ferryl-HbGp (Fe⁴⁺) and this redox reaction can be monitored on HbGp/Nafion/GCE with a detection limit of 8.5 × 10^‒7  mol L^-1. In addition to high sensitivity, the electrochemical biosensor also provided reproducible, consistent, and accurate measurements. The electroanalytical method showed an appropriate performance to quantify different levels of H₂O₂ in milk samples, proving the potential of HbGp/Nafion/GCE for this purpose.