Synthesis and characterization of tannic acid pillared bentonite composite for the efficient adsorption of aflatoxins

Zn@TA assisted dual cross-linked 3D printable glycol grafted chitosan hydrogels for robust antibiofilm and wound healing

Rapid regeneration of the injured tissue or organs is necessary to achieve the usual functionalities of the damaged parts. However, bacterial infections delay the regeneration process, a severe challenge in the personalized healthcare sector. To overcome these challenges, 3D-printable multifunctional hydrogels of Zn/tannic acid-reinforced glycol functionalized chitosan for rapid wound healing were developed. Polyphenol strengthened intermolecular connections, while glutaraldehyde stabilized 3D-printed structures. The hydrogel exhibited enhanced viscoelasticity (G'; 1.96 × 104 Pa) and adhesiveness (210 kPa). The dual-crosslinked scaffolds showed remarkable antibacterial activity against Bacillus subtilis (∼81 %) and Escherichia coli (92.75 %). The hydrogels showed no adverse effects on human dermal fibroblasts (HDFs) and macrophages (RAW 264.7), indicating their superior biocompatibility. The Zn/TA-reinforced hydrogels accelerate M2 polarization of macrophages through the activation of anti-inflammatory transcription factors (Arg-1, VEGF, CD163, and IL-10), suggesting better immunomodulatory effects, which is favorable for rapid wound regeneration. Higher collagen deposition and rapid re-epithelialization occurred in scaffold-treated rat groups vis-à-vis controls, demonstrating superior wound healing. Taken together, the developed multifunctional hydrogels have great potential for rapidly regenerating bacteria-infected wounds in the personalized healthcare sector.

Novel Schiff's base-assisted synthesis of metal-ligand nanostructures for multi-functional applications: Detection of catecholamines/antibiotics, removal of tetracycline, and antifungal treatment against plant pathogens

The development of nanozymes (NZ) for the simultaneous detection of multiple target chemicals is gaining paramount attention in the field of food and health sciences, and waste management industries. Nanozymes (NZ) effectively compensate for the environmental vulnerability of natural enzymes. Considering the development gap of NZ with diverse applications, we synthesized versatile Schiff's base ligands following a facile route and readily available starting reagents (glutaraldehyde, aminopyridines). DPDI, one of the synthesized ligands, readily reacted with transition metal ions (Cu+2, Ag+1, Zn+2 in specific) under ambient conditions, yielding the corresponding nanoparticles/MOF. The structures of ligands and their products were confirmed using various analytical techniques. The enzymatic efficacy of DPDI-Cu (km 0.25 mM=, Vmax = 10.75 µM/sec) surpassed Tremetese versicolor laccase efficacy (km 0. 5 mM=, Vmax = 2.15 µM/sec). Additionally, DPDI-Cu proved resilient to changing pH, temperature, ionic strength, organic solvent, and storage time compared to laccase and provided reusability. DPDI-Cu proved promising for colorimetric detection of dopamine, epinephrine, catechol, tetracycline, and quercetin. The mechanism of oxidative detection of TC was studied through LC/MS analysis. DPDI-Cu-bentonite composite efficiently adsorbed tetracycline with maximum Langmuir adsorption of 208 mg/g. Moreover, DPDI/Cu and DPDI-Ag nanoparticles possessed antifungal activity exhibiting a minimum inhibitory concentration of 400 µg/mL and 3.12 µg/mL against Aspergillus flavus. Florescent dye tracking and SEM/TEM analysis confirmed that DPDI-Ag caused disruption of the plasma membrane and triggered ROS generation and apoptosis-like death in fungal cells. The DPDI-Ag coating treatment of wheat seeds confirmed the non-phytotoxicity of Ag-NPs.

The mitigative role of novel aflatoxin-degrading enzymes in diverse broiler performance indicators and gut microbiota following the consumption of diets contaminated with aflatoxins

BACKGROUND

This study aims to explore both the toxic effects of aflatoxins (AFs) and the protective effects of degrading enzymes (DE) on broilers exposed to AFs.

RESULTS

The findings reveal that a diet contaminated with 69.15 μg kg-1 of aflatoxin B1 had significant adverse effects on broilers. Specifically, it led to a reduction in average daily gain, dressed yield percentage, half-eviscerated yield with giblet yield percentage, eviscerated yield percentage, as well as serum superoxide dismutase (SOD), glutathione peroxidase activity and liver SOD activity (P < 0.05). Conversely, the diet increased the feed conversion ratio, liver index, serum glutamic oxaloacetic transaminase levels and malondialdehyde levels in both serum and liver (P < 0.05). Additionally, AFs disrupted the intestinal microflora significantly (P < 0.05), altering the relative abundance of Enterococcus, Lactobacillus and Escherichia in broiler jejunum. The addition of DE to AF-contaminated feed mitigated these negative effects and reduced the residues of aflatoxin B1, aflatoxin B2 and aflatoxin M1 in the liver and duodenum (P < 0.05). We also observed that broilers fed the diet pelleted at 80 °C exhibited improved dressing percentage and water holding capacity compared to those on the 75 °C diet.

CONCLUSION

In summary, DE serves as an effective feed additive for mitigating AF contamination in poultry production. © 2024 Society of Chemical Industry.

One stone two birds: Recycling of an agri-waste to synthesize laccase-immobilized hierarchically porous magnetic biochar for efficient degradation of aflatoxin B1 in aqueous solutions and corn oil

Aflatoxin B1 (AFB1) contamination of oils is a serious concern for the safety of edible oil consumers. Enzyme-assisted detoxification of AFB1 is an efficient and safe method for decontaminating oils, but pristine enzymes are unstable in oils and require modifications before use. Therefore, we designed a novel and magnetically separable laccase-carrying biocatalyst containing spent-mushroom-substrate (SMS)-derived biochar (BF). Laccase was immobilized on NH2-activated magnetic biochar (BF-NH2) through covalent crosslinking, which provided physicochemical stability to the immobilized enzyme. After 30 days of storage at 4 °C, the immobilized laccase (product named "BF-NH2-Lac") retained ~95 % of its initial activity, while after five repeated cycles of ABTS oxidation, ~85 % activity retention was observed. BF-NH2-Lac was investigated for the oxidative degradation of AFB1, which exhibited superior performance compared to free laccase. Among many tested natural compounds as mediators, p-coumaric acid proved the most efficient in activating laccase for AFB1 degradation. BF-NH2-Lac demonstrated >90 % removal of AFB1 within 5.0 h, while the observed degradation efficiency in corn oil and buffer was comparable. An insight into the adsorptive and degradative removal of AFB1 revealed that AFB1 removal was governed mainly by degradation. The coexistence of multi-mycotoxins did not significantly affect the AFB1 degradation capability of BF-NH2-Lac. Investigation of the degradation products revealed the transformation of AFB1 into non-toxic AFQ1, while corn oil quality remained unaffected after BF-NH2-Lac treatment. Hence, this study holds practical importance for the research, knowledge-base and industrial application of newly proposed immobilized enzyme products.

Synthesis of 2-amino-terephthalic acid crosslinked chitosan/bentonite hydrogel; an efficient adsorbent for anionic dyes and laccase

This research article presents the fabrication of NH2-terephthalic acid crosslinked chitosan-bentonite composite, which adopted a facile synthesis approach and offered efficient adsorption capacity for organic dyes. A novel hydrogel material named CB 5:1 demonstrated remarkable adsorption for anionic dyes (Congo red (CR) and brilliant blue (BB)) while showing a negligible affinity for cationic dyes. Adsorption isotherm studies revealed the adsorption capacity of 4950 mg/g and 2053 mg/g (per g of composite's dry weight) for CR and BB following the Langmuir adsorption model. Kinetics and thermodynamic studies were also conducted while the adsorption of anionic dyes in the presence of metal ions, cationic dyes, anionic dyes, and in simulated water remained unaffected. Laccase, an industrially important enzyme, was also immobilized on CB 5:1 to achieve enzyme stability and reusability, resulting in a staggering immobilization capacity (4782 mg/g) at pH 6.0. Laccase immobilized product was employed to perform dye degradation (> 90 % for CR and > 75 % for BB), and the reusability was tested. Overall, our crosslinked product proved appealing for removing high concentrations of anionic organic dyes from polluted water and could be envisaged for practical use.

A Magnetic Reduced Graphene Oxide Nanocomposite: Synthesis, Characterization, and Application for High-Efficiency Detoxification of Aflatoxin B1

(1) Background: Safety problems associated with aflatoxin B1 (AFB1) contamination have always been a major threat to human health. Removing AFB1 through adsorption is considered an attractive remediation technique. (2) Methods: To produce an adsorbent with a high AFB1 adsorption efficiency, a magnetic reduced graphene oxide composite (Fe3O4@rGO) was synthesized using one-step hydrothermal fabrication. Then, the adsorbent was characterized using a series of techniques, such as SEM, TEM, XRD, FT-IR, VSM, and nitrogen adsorption-desorption analysis. Finally, the effects of this nanocomposite on the nutritional components of treated foods, such as vegetable oil and peanut milk, were also examined. (3) Results: The optimal synthesis conditions for Fe3O4@rGO were determined to be 200 °C for 6 h. The synthesis temperature significantly affected the adsorption properties of the prepared material due to its effect on the layered structure of graphene and the loading of Fe3O4 nanoparticles. The results of various characterizations illustrated that the surface of Fe3O4@rGO had a two-dimensional layered nanostructure with many folds and that Fe3O4 nanoparticles were distributed uniformly on the surface of the composite material. Moreover, the results of isotherm, kinetic, and thermodynamic analyses indicated that the adsorption of AFB1 by Fe3O4@rGO conformed to the Langmuir model, with a maximum adsorption capacity of 82.64 mg·g-1; the rapid and efficient adsorption of AFB1 occurred mainly through chemical adsorption via a spontaneous endothermic process. When applied to treat vegetable oil and peanut milk, the prepared material minimized the loss of nutrients and thus preserved food quality. (4) Conclusions: The above findings reveal a promising adsorbent, Fe3O4@rGO, with favorable properties for AFB1 adsorption and potential for food safety applications.

Removal of aflatoxin B1 from contaminated milk and water by nitrogen/carbon-enriched cobalt ferrite -chitosan nanosphere: RSM optimization, kinetic, and thermodynamic perspectives

In view of the feed/foods inevitably contaminated by toxic and carcinogenic aflatoxin B1 (AFB1), efficient mesoporous metformin-chitosan/silica‑cobalt ferrite nanospheres (Mt-CS/CFS NSs) was prepared to remove AFB1 from aqueous/non-aqueous media. The morphological, functional, and structural characteristics and adsorption properties of C/N-enriched CS/CFS were investigated systematically. The interactive operating variables (temperature (5.0-35 °C); time (10-100 min); AFB1 dose (50-100 μg/mL); and Mt-CS/CFS dosage (0.5-3.5 mg) were optimized via the Box-Behnken design (BBD), which demonstrated good agreement between the experimental data and proposed model. The adsorption efficiency in artificially contaminated cow's milk as well as aqueous environment reached over 91.0 % in a wide pH range (3.0-9.0), without significant change in the nutritional value of milk. Freundlich isotherm and second-order adsorption kinetics were regarded as the most suitable models to fit the adsorption results, and the adsorption rate is dominated by the intra-particle diffusion and boundary layer diffusion. Thermodynamic analyses proved that the process was spontaneous and exothermic. The adsorption mechanism could be explained as physisorption via hydrogen bonding, n-π interaction, and hydrophobic/hydrophilic interactions. The porous Mt-CS/CFS NS derived from chitosan nanoparticles is therefore outstanding adsorbent, offering great adsorptive performance and recycabilities, which impedes economic losses in the food industry.

Barium hexaferrite nanoplatelets with polyphenol coatings for versatile applications as a stable, magnetic, and antimicrobial colloid

Colloidal stabilization of magnetic nanoparticles is one of the most important steps in the preparation of magnetic nanoparticles for potential biomedical applications. A special kind of magnetic nanoparticle are barium hexaferrite nanoplatelets (BSHF NPLs) with a hexagonal shape and a permanent magnetic moment. One strategy for the stabilization of BHF in aqueous media is to use coatings. In our research, we used an eco-friendly tannic acid, as a coating on BSHF NPLs. As-prepared BSHF NPLs coated with tannic acid were examined with transmission electron microscopy, infrared and UV-Vis spectroscopy, electro-kinetic measurements, and their room-temperature magnetic properties were measured. Stable colloids were tested in two biological complex media and antimicrobial properties of the material were examined. To enhance the antimicrobial properties of our material, we used tannic acid as a platform for the in-situ production of silver on BSHF NPLs. New hybrid material with silver also possesses magnetic properties and excellent antimicrobial activity against Escherichia coli and Staphylococcus aureus.

Effects of Chinese Gallnut Tannic Acid on Growth Performance, Blood Parameters, Antioxidative Status, Intestinal Histomorphology, and Cecal Microbial Shedding in Broilers Challenged with Aflatoxin B1

The objective of the present study was to investigate the effects of tannic acid (TA) on growth performance, blood parameters, antioxidant capacity, and intestinal health in broilers challenged with aflatoxin B1 (AFB1). A total of 480 1-d-old broilers were randomly allotted into 4 treatments: 1) CON, control diet, 2) AF, CON + 60 μg/kg AFB1 of feed during d 1 to 21, CON + 120 μg/kg AFB1 of feed during d 22 to 42, 3) TA1, AF +250 mg/kg TA, 4) TA2, AF +500 mg/kg TA. Average daily gain (ADG) and average daily feed intake (ADFI) were increased in the TA1 during d 1 to 21, d 22 to 42 and d1 to 42 compared with CON and AF treatments (P < 0.05). Broilers fed the TA2 diet had greater ADG and ADFI than those fed the CON and AF diets during the finisher and the whole period (P < 0.05). Administration of TA decreased the relative weight of liver and kidney compared with broilers fed the AF diet on d 42 (P < 0.05). The blood activity of alanine transferase (ALT) and gamma-glutamyl transferase (GGT) was increased in the AF treatment compared with the CON (P < 0.05). Broilers fed the TA1 decreased the ALT content on d 21, and the level of ALT and GGT was decreased in the TA2 compared with the AF group on d 42 (P < 0.05). The activity of total superoxide dismutase (T-SOD) and glutathione peroxidase (GSH-Px) in plasma, and the hepatic glutathione S-transferase (GST) was decreased in the AF group compared with the CON group (P < 0.05). The TA decreased plasma malondialdehyde concentration, and increased plasma T-SOD, GSH-Px, total antioxidant capacity, and hepatic GST activity compared to the AF (P < 0.05). The crypt depth of jejunum was decreased in the TA1 treatment on d 21, and the villus height of ileum was increased in the TA2 group on d 42 compared with the AF treatment (P < 0.05). The cecal Lactobacillus counts on d 21 was tended to increase in the TA treatments compared with the AF (P = 0.061). In conclusion, dietary inclusion of 250 mg/kg and 500 mg/kg TA could improve the growth, antioxidant capacity, and partially protected the intestinal health of broilers challenged with AFB1.