Arthroscopic Bone Block Cerclage Technique Using a Tricortical Scapular Spine Autograft for Glenoid Reconstruction in Patients With Anterior Shoulder Instability

Arthroscopic Posterior Bone Block Stabilization Using a Tricortical Autograft of the Ipsilateral Scapular Spine

Posterior bone grafting represents an emerging therapeutic approach for addressing recurrent instability in the posterior shoulder, particularly when coupled with substantial glenoid bone loss. Although not as prevalent as anterior instability, recent years have witnessed the development of numerous open and arthroscopic bony reconstruction methods. A technical gold standard for posterior bone grafting remains undefined, leading to ongoing advancements in bone grafting techniques. In response to past challenges associated with screw fixation, metal-free arthroscopic fixation procedures have been introduced to the realm of bone grafting. These metal-free methods often entail intricate transglenoid drilling, which poses potential surgical complexities and risks to both posterior and anterior soft tissues, as well as neurovascular structures. Therefore, we introduce an arthroscopic approach to posterior bone grafting using PEEK (polyether ether ketone) anchors with interconnected sutures and a scapular spine autograft. This method overcomes previous hurdles by facilitating the restoration of the posterior glenoid bone stock with precise positioning and secure fixation of the tricortical scapular spine bone autograft.

Clinical Outcomes and Graft Resorption After Metal-Free Bone Block Suture Tape Cerclage Fixation for Recurrent Anterior Shoulder Instability: A Computed Tomography Analysis

BACKGROUND

Glenoid reconstruction with a bone block for anterior glenoid bone loss (GBL) has shown excellent outcomes. However, fixation techniques that require metal implants are associated with metal-related complications and bone graft resorption.

HYPOTHESIS

Arthroscopic glenoid reconstruction using a tricortical iliac crest bone graft (ICBG) and metal-free suture tape cerclage fixation can safely and effectively restore the glenoid surface area in patients with recurrent anterior shoulder instability and anterior GBL.

STUDY DESIGN

Case series; Level of evidence, 4.

METHODS

Adult patients (≥18 years) of both sexes with recurrent anterior shoulder instability and anterior GBL ≥15% were enrolled. These patients underwent arthroscopic glenoid reconstruction with ICBGs and metal-free suture tape cerclage fixation. The effectiveness and clinical outcomes with this technique were evaluated at 24 months using functional scores. Resorption of the graft articular surface was assessed by computed tomography, with the graft surface divided into 6 square areas aligned in 2 columns. Descriptive analysis was conducted.

RESULTS

A total of 23 consecutive patients met inclusion criteria (22 male, 1 female; mean age, 30.5 ± 7.9 years). The mean preoperative GBL was 19.7% ± 3.4%, and there were 15 allograft and 8 autograft ICBGs. All patients exhibited graft union at 3 months. The median follow-up was 38.5 months (interquartile range, 24-45 months). The Western Ontario Shoulder Instability Index, Rowe, Constant-Murley, and Subjective Shoulder Value scores improved from preoperatively (35.1%, 24.8, 83.1, and 30.9, respectively) to postoperatively (84.7%, 91.1, 96.0, and 90.9, respectively) (P < .001). No differences in clinical scores were observed between the graft types. One surgical wound infection was reported, and 2 patients (8.7% [95% CI, 2.4%-26.8%]) required a reoperation. The mean overall glenoid surface area increased from 80.3% ± 3.5% to 117.0% ± 8.3% immediately after surgery before subsequently reducing to 98.7% ± 6.2% and 95.0% ± 5.7% at 12 and 24 months, respectively (P < .001). The mean graft resorption rate was 18.1% ± 7.9% in the inner column and 80.3% ± 22.4% in the outer column. Additionally, 3 patients treated with an allograft (20.0% [95% CI, 7.1%-45.2%]), including the 2 with clinical failures, exhibited complete graft resorption at the last follow-up.

CONCLUSION

Arthroscopic glenoid reconstruction using an ICBG and metal-free suture tape cerclage fixation was safe and effective, yielding excellent clinical outcomes. Resorption of the graft articular surface predominantly affected the nonloaded areas beyond the best-fit circle perimeter.

Free Bone Block Procedures for Glenoid Reconstruction in Anterior Shoulder Instability

Advances in the understanding and management of bone loss in shoulder instability have led to the development of free bone block techniques as an alternative to the Latarjet procedure. These techniques have been proposed as a theoretically safer option to Latarjet, and there is growing clinical enthusiasm in their use. The purpose of this article was to contextualize the utilization of free bone block procedures in the current treatment paradigm of anterior shoulder instability and to review the history and common types of bone autograft (eg, iliac crest, distal clavicle, scapular spine) and allograft (eg, distal tibia, preshaped blocks) techniques and approaches, as well as their clinical effectiveness and safety.

Assessment of micromotion at the bone-bone interface after coracoid and scapular-spine bone-block augmentation for the reconstruction of critical anterior glenoid bone loss-a biomechanical cadaver study

BACKGROUND

Glenoid bone loss is among the most important risk factors for recurrent anterior shoulder instability, and a bony reconstruction is recommended in cases of critical bone loss (> 15%). The commonly used surgical techniques, including coracoid transfer, are associated with considerable complications. The aim of this study was to assess the motion at the glenoid-bone-block interface after coracoid and spina-scapula bone-block reconstruction of the anterior glenoid.

METHODS

Twelve cadaveric shoulders were tested. A 20% bone defect of the anterior glenoid was created, and the specimens were randomly assigned for glenoid augmentation using a coracoid bone block (n = 6) or a scapular spine bone block (n = 6). The glenoid-bone interface was cyclically loaded for 5000 cycles with a force of 170 N. The micromotion was tracked using an optical measurement system (GOM ARMIS) and was evaluated with the GOM Correlate Pro software.

RESULTS

The most dominant motion component was medial irreversible displacement for the spina-scapula (1.87 mm; SD: 1.11 mm) and coracoid bone blocks (0.91 mm; SD: 0.29 mm) (n.s.). The most medial irreversible displacement took place during the first nine cycles. The inferior reversible displacement was significantly greater for spina-scapula bone blocks (0.28 mm, SD: 0.16 mm) compared to coracoid bone blocks (0.06 mm, SD: 0.10 mm) (p = 0.02).

CONCLUSIONS

The medial irreversible displacement is the dominant motion component in a bone-block reconstruction after a critical bone loss of the anterior glenoid. The spina-scapula and coracoid bone blocks are comparable in terms of primary stability and extent of motion. Thus, spina-scapula bone blocks may serve as alternatives in bony glenoid reconstruction from a biomechanical point of view.

Arthroscopic Xenograft With Cerclage Fixation: A Method for Glenoid Bone Loss Reconstruction With Cerclage Fixation Using a Specific Posterior Guide

Large glenoid bone defects are closely associated with high failure rates after arthroscopic Bankart repair in chronic anterior shoulder instability; therefore nowadays the glenoid bone grafting reconstruction procedure is strictly recommended. On the contrary, the optimal grafting procedure is still controversial because there is considerable concern about the resorption rate of allografts, donor site morbidity of the autografts, and sequelae caused by the use of metal fixation devices in proximity of the shoulder joint. We describe an all-arthroscopic technique for anatomic reconstruction of the glenoid that uses a previously shaped xenograft assembled with a metal-free fixation device using 2 ultra-high-strength sutures (FiberTape Cerclage System; Arthrex, Naples, FL), using a specific posterior guide (Arthrex, Naples, FL) in combination with upper third subscapularis augmentation.

Association Between Preoperative Glenoid Bone Loss and Postoperative Outcomes After Coracoid Transfer Combined With Open Bankart Repair: Comparison of the Bristow and Latarjet Techniques

Background

Whether the extent of glenoid bone loss (GBL) affects clinical outcome after coracoid process transfer (CPT) is still unclear.

Purpose

To evaluate postoperative outcomes after CPT combined with open Bankart repair in young rugby players in terms of the extent of GBL and between the Bristow and Latarjet techniques.

Study Design

Cohort study; Level of evidence, 3.

Methods

The authors investigated 101 shoulders in 91 competitive rugby players who underwent CPT combined with open Bankart repair by the Bristow (group B; 66 shoulders) or Latarjet (group L; 35 shoulders) procedure between 2007 and 2017. The extent of GBL was calculated from the en face view of the glenoid on preoperative 3-dimensional computed tomography scans and was used to categorize shoulders into 4 grades (grade 0, 0%; grade 1, >0% and ≤10%; grade 2, >10% and ≤20%; grade 3, >20%). At the minimum 2-year follow-up, the authors analyzed the relationship between GBL or GBL grade and postoperative outcome scores (American Shoulder and Elbow Surgeons score, Rowe score, Western Ontario Shoulder Instability Index, and patient satisfaction), return-to-play (RTP) times, graft failure (insufficient union or translocation), and recurrence.

Results

The mean GBL in all shoulders was 10.9% ± 9.2% and was not significantly different between the 2 groups. There were no significant correlations between GBL and any outcome measure in either group. The mean RTP time was significantly shorter in group L versus group B (4.8 ± 1.1 vs 5.8 ± 1.8 months, respectively; P = .002), but it was not associated with GBL. In group B, the rate of graft failure was not significantly higher in shoulders with grade 0 or 1 GBL versus grade 2 or 3 GBL (8 [25.0%] vs 4 [11.8%], respectively; P = .21). In group B, graft failure was confirmed in 12 shoulders (18.2%), compared with 1 shoulder (2.9%) in group L. Postoperative recurrence occurred in significantly fewer shoulders in group B than in group L (2 [3.0%] vs 5 [14.3%], respectively; P = .047).

Conclusion

The extent of GBL did not affect outcome scores after CPT, regardless of operative procedure.

Morphometric and Biomechanical Comparison of the Scapular Spine and Coracoid Graft in Anterior Shoulder Instability

BACKGROUND

The scapular spine has been described as a relatively new bone graft alternative used in glenoid augmentation. The classic Latarjet procedure, which transfers the coracoid as a graft, is regarded as the gold standard. The comparison of these 2 techniques has not been fully reported.

PURPOSE

To compare the anatomic and biomechanical properties of glenoid augmentation using scapular spine graft or coracoid graft.

STUDY DESIGN

Controlled laboratory study.

METHODS

The study used 20 fresh-frozen human cadaveric shoulders. A 25% anterior glenoid defect was created, and the specimens were divided randomly to receive glenoid augmentation by scapular spine or coracoid grafts. For both procedures, the grafts were secured to the glenoid defect with 2 screws. Morphometric data, including the glenoid articular area, amount of restoration, and graft dimensions, were obtained. A biomechanical test was conducted in a direct-loading scenario. The construct stiffness, cyclic displacement, and ultimate failure of each specimen were collected.

RESULTS

No significant difference was found in glenoid articular restoration between the scapular spine group and the coracoid group (31% vs 33%, respectively; P = .311). Morphometric analysis indicated that coracoid grafts exhibited significantly greater thickness and height than scapular spine grafts. In biomechanical results, the scapular spine group exhibited significantly greater construct stiffness than the coracoid group (206.3 ± 58.8 vs 148.3 ± 76.0 N/mm, respectively; P = .023). The average failure load in the scapular spine group was not significantly higher than that in the coracoid group. No significant differences in cyclic displacement were found between the 2 techniques.

CONCLUSION

In a simulated 25% anterior glenoid bony defect, a scapular spine graft was comparable with the classic Latarjet procedure in restoring the glenoid articular dimension and exhibited superior construct stiffness in a cadaveric model.

CLINICAL RELEVANCE

The scapular spine may serve as an alternative graft choice in glenoid augmentation surgery considering the amount of articular restoration and initial fixation stability.

Early Treatment of Shoulder Pathology Is Necessary but Not Enough Is Being Performed

Delayed treatment of shoulder instability results in bone loss requiring more-complicated surgery, in turn resulting in less-optimal outcomes. Similarly, delayed treatment of repairable rotator cuff tears results in irreparable tears requiring more-complicated surgery and resulting in less-optimal outcomes. Delayed treatment of shoulder pathology is a problem. Solutions include education and research investigation.