Left Ventricular Outflow Tract: Intraoperative Measurement and Changes Caused by Mitral Valve Surgery

Is There a Correlation Between Left Ventricular Outflow Tract Velocity Time Integral and Stroke Volume Index in Patients Undergoing Cardiac Surgery?

Introduction

Left ventricular outflow tract velocity time integral (LVOT VTI) is a promising surrogate for stroke volume (SV). However, there is controversy in the literature regarding its correlation with thermodilution or newer cardiac output measurement techniques. This study was conducted to determine the correlation between LVOT VTI determined by transesophageal echocardiography (TEE) with stroke volume index (SVI) calculated by thermodilution.

Methods

Consecutive patients older than 17 years undergoing elective cardiac surgery with pulmonary artery catheter (PAC) and TEE monitoring between September 2021 and February 2022 were included in this prospective, descriptive, single-center study. LVOT VTI was measured using TEE after induction of anesthesia but before skin incision and at least four hours after initial LVOT VTI measurement. SVI was simultaneously measured using the continuous thermodilution technique with a PAC. The correlation between LVOT VTI and SVI was determined with Pearson’s correlation index.

Results

Twelve patients were included and 21 paired measurements were compared. Mean SVI was 31.62 ± 10.71 mL/m² and mean LVOT VTI was 14.74 ± 4.79 cm. The Pearson's correlation index for the two measurements was r = 0.257, p = 0.262.

Conclusion

This prospective study demonstrated a weak correlation between LVOT VTI and SVI in patients undergoing cardiac surgery.

Intraoperative transesophageal echocardiography following mitral valve repair: a systematic review

OBJECTIVE

We aimed to examine the recent evidence and search for novel assessments on intraoperative TEE following mitral valve repair that can impact short and long-term outcomes.

METHODS

The Ovid MEDLINE, PubMed, and EMBASE databases were searched from January 1, 2008, until January 27, 2021, for studies on patients with severe Mitral Valve Regurgitation (MR) undergoing Mitral Valve (MV) repair surgery with intraoperative Transesophageal Echocardiography (TEE) performed after the repair. Additional searches were conducted using Google search engine, Web of Science, and Cochrane Library.

RESULTS

After reviewing 302 records, 8 retrospective and 22 prospective studies were included (n = 30). Due to clinical and methodological diversity, these studies are noncomparable and data were not amenable to quantitative synthesis.

CONCLUSION

Although technological advances allowed the objective assessment of geometric and dynamic alterations of the MV, the impact of the use of these technologies on short- or long-term outcomes was not studied. There is uncertainty and conflicting evidence on the ideal method and metrics to evaluate MV patency post-repair. Few isolated studies validated methods to assess coaptation surface and LV function post-repair.

Morphology display and hemodynamic testing using 3D printing may aid in the prediction of LVOT obstruction after mitral valve replacement

AIMS

Left ventricular outflow tract(LVOT) obstruction after mitral valve replacement can be life-threatening once occur. We simulated mitral valve replacement preoperatively using dynamic, three-dimensional(3D) printed models to help predict LVOT obstruction in this study.

METHODS

56 patients who underwent mitral valve replacement were included. Prediction of LVOT obstruction in vitro was based on the data from 4 sources: digital, anatomical, flexible, and dynamic model. Digital 3D models were designed based on computed tomography (CT) image dataset and printed with photopolymer resin to create a 3D anatomical model, which contributed to the morphology display. Then, flexible models were made from specialized silicone, which is similar to cardiac tissue in terms of its softness and elasticity. Dynamic function was achieved by coupling flexible models to a mock circulatory system (MCS). Besides, surgery simulation and hemodynamic testing was done using dynamic 3D printed model and patients were regrouped based on hemodynamic change. Finally, different methods for prediction of LVOT obstruction as well as classification based on two-dimensional image data and dynamic model were compared with surgical results as golden standard.

RESULTS

(1)Qualitatively, the prediction of LVOT obstruction using the dynamic 3D model was the most accurate and was consistent with clinical outcomes. In the four patients who developed LVOT obstruction after surgery, only two were at a high risk based on the other three models. (2)Quantitatively, the area of neo-LVOT predicted by the digital, anatomical, and flexible models was higher compared with the dynamic models and in-vivo after surgery. (3)Classification based on traditional criteria(two-dimensional image data) was different from surgical results. While the difference between dynamic model and surgical results was not statistically different.

CONCLUSIONS

After coupling the flexible model with the mock circulatory system, the dynamic 3D model predicted LVOT obstruction more accurately with hemodynamic testing compared with morphological evaluation. 3D printing can assist surgeons to better plan mitral valve replacement than traditional image data.

Transcatheter mitral valve replacement: latest advances and future directions

Mitral regurgitation remains the most common form of valve disease worldwide and given an aging population with a significant proportion of secondary mitral regurgitation, a transcatheter approach to mitral valve replacement has become a major goal of the transcatheter therapeutics field. Mitral regurgitation can be caused by disease of the leaflets (primary) or by diseases of the left atrium or left ventricle (LV) (secondary or functional), and may involve overlap of the two (mixed disease). The location of the mitral valve (and large size), the approach to anchoring a valve replacement, and concerns about left ventricular outflow tract (LVOT) obstruction are all issues that have made the transcatheter delivery of a valve replacement challenging. Despite these challenges, both transapical and transseptal devices are currently being developed, with several in early feasibility trials and several entering pivotal trials. As the field of transcatheter mitral valve replacement (TMVR) improves and develops, a critical part of evaluating patients with mitral valve disease will be utilizing the heart team approach to identify and individualize the most appropriate treatment for each patient.

Current Devices in Mitral Valve Replacement and Their Potential Complications

Mitral regurgitation is one of the most prevalent valvulopathies worldwide, and its surgical treatment is not feasible in all cases. The elderly and frail with several comorbidities and left ventricular dysfunction are often managed conservatively. Percutaneous treatment (repair or replacement) of the mitral valve has emerged as a potential option for those patients who are at a high risk for surgery. Mitral valve repair with the Mitraclip device proved both increased safety and mortality reduction in patients with severe mitral regurgitation. On the other hand, in the last decade, percutaneous mitral replacement opened new frontiers in the field of cardiac structural interventions. There are few mitral devices; some are in the early phase of development and some are waiting for CE mark of approval. The evolution of these devices was more complicated compared to the aortic technology due to the native mitral valve's complexity and access. This review aims to provide an overview of the current devices, their specific features, and their potential complications.

Transcatheter Mitral Valve Replacement: Rationale and Current Status

Mitral regurgitation (MR) is the most prevalent form of moderate or severe valve disease in the developed world. MR can result from impairment of any part of the mitral valve apparatus and is classified as primary (disease of the leaflets) or secondary (functional). The presence of at least moderate MR is associated with increased morbidity and mortality. With the goal of avoiding the risks of traditional surgery, transcatheter mitral valve therapies have been developed. The current transcatheter repair techniques are limited by therapeutic target and incomplete MR reduction, and thus transcatheter mitral valve replacement (TMVR) has been pursued. Several devices (both transapical and transseptal) are under development, with both early feasibility and pivotal trials under way. As this field develops, the decision to treat with TMVR will require a heart team approach that takes patient-, disease-, and device-specific factors into account.

Left Ventricular Outflow Tract Obstruction: A Potential Obstacle for Transcatheter Mitral Valve Therapy

Transcatheter mitral valve replacement is the focus of much enthusiasm as the future of therapy for mitral valve disease. Despite technological advances, left ventricular outflow tract (LVOT) obstruction from the valve prosthesis remains an important issue. In this review the authors discuss the pathophysiology of LVOT obstruction in both the surgical and transcatheter experience, imaging evaluation preprocedure, outcomes to date, and therapeutic options.

The Carpentier-Edwards Perimount Magna mitral valve bioprosthesis: intermediate-term efficacy and durability

Background

The Carpentier-Edwards Perimount Magna mitral valve bioprosthesis (Edwards Lifesciences, Irvine, CA) is a low-profile version of the earlier Perimount valve that uses the ThermaFix process for enhanced calcium removal. The Magna valve has been in use since 2008, yet no publication, until now, has verified its intermediate-term safety and efficacy.

Methods

From 2008 through 2011 (our 4-year study period), 70 Magna valves were implanted in the mitral position at a single institution (the Cleveland Clinic). Echocardiograms were prospectively interpreted. For this study, we reviewed patients’ charts; endpoints included hemodynamic measurements, in-hospital morbidity and mortality, valve-related events, resource utilization, and 5-year survival rates.

Results

The mean patient age was 68 years; 43 % of the patients had New York Heart Association (NYHA) class III or IV disease, and 51.4 % had moderately severe, or worse, mitral regurgitation (MR). For 43 % of the patients, the Magna valve implantation was a reoperation. For 83 %, the Magna valve implantation also included a concomitant cardiac procedure. The median survival rate was 4.7 years and 90 % of patients were free from significant structural valve degeneration at 5 years. Preoperative atrial fibrillation, ischemic MR, intraaortic balloon pump placement, cardiogenic shock, cardiac arrest, and renal failure were associated with increased mortality. Right ventricular systolic pressure decreased from 50 mmHg preoperatively to 40 mmHg postoperatively, according to our matched-pair analysis (P = 0.003). Per their final echocardiogram during our study period, 98 % of surviving patients had trivial or no MR, one patient had mild MR, and one patient had severe MR.

Conclusions

Our 5-year experience indicates that the Magna valve offers excellent intermediate-term durability and substantial echocardiographic improvement; its low-profile design make it ideal for reoperations and for concomitant cardiac procedures, including valve replacement.

[Application fields of intraoperative transesophageal 3D echocardiography]

Intraoperative transesophageal echocardiography (TEE) is an established diagnostic tool and has to be regarded as the standard of care for intraoperative monitoring and cardiac surgical decision-making. Furthermore, intraoperative TEE is also used for monitoring and assessment of hemodynamic changes and the detection of previously unknown pathologies. In the past few years 3D-TEE has extended the spectrum of 2D-TEE by allowing pathomorphological features to be more easily and intuitively linked to the anatomy of the heart and the great vessels. Thus, a comprehensive 2D-TEE examination is favorably complemented by focused 3D-TEE. Especially during mitral valve surgery, 3D-TEE has proven its superiority in the diagnosis of the underlying pathology as demonstrated by a large number of studies in this field. This review presents the available data about the role of intraoperative 3D-TEE echocardiography and introduces practical fields of application.

Elevated transaortic valvular gradients after combined aortic valve and mitral valve replacement: an intraoperative dilemma

High transaortic valvular gradients, after combined aortic valve and mitral valve replacement, require prompt intraoperative diagnosis and appropriate management. The presence of high transaortic valvular gradients after cardiopulmonary bypass, in this setting, can be secondary to the following conditions: prosthesis dysfunction, left ventricular outflow tract obstruction, supravalvular obstruction, prosthesis-patient mismatch, hyperkinetic left ventricle from administration of inotropes, left ventricular intracavitary gradients, pressure recovery phenomenon, and increased transvalvular blood flow resulting from hyperdynamic circulation or anemia. Transesophageal echocardiography is an extremely useful tool for timely diagnosis and treatment of this complication. We describe a case of a critically ill patient with endocarditis and acute lung injury, who presented for combined aortic valve and mitral valve replacement. Transesophageal echocardiographic assessment, post-cardiopulmonary bypass, revealed high transaortic valvular gradients due to encroachment of the mitral prosthesis strut on the left ventricular outflow tract, which was compounded by a small, hypertrophied, and hyperkinetic left ventricle. Discontinuation of inotropic support, administration of fluids, phenylephrine, and esmolol led to resolution of the high gradients and prevented further surgery.

Image quality influences the assessment of left ventricular function: an intraoperative comparison of five 2-dimensional echocardiographic methods with real-time 3-dimensional echocardiography as a reference

OBJECTIVES

Transesophageal echocardiography has become a standard tool for evaluating left ventricular function during cardiac surgery. However, the image quality varies widely between patients and examinations. The aim of this study was to investigate the influence of the image quality on 5 commonly used 2-dimensional methods.

METHODS

Transesophageal real-time 3-dimensional echocardiography (3DE) served as a reference. Left ventricular function was evaluated in 63 patients with sufficient real-time 3DE image quality. The image quality was rated using the ratio of the visualized border divided by the total endocardial border. These ratings were used to generate groups of poor (0%-40%), fair (41%-70%), and good (71%-100%) image quality. The ejection fraction (EF), end-diastolic volume, and end-systolic volume were analyzed by the Simpson method of disks (biplane and monoplane), eyeball method, Teichholz method, and speckle-tracking method. Furthermore, the fractional area change was determined. Each correlation with real-time 3DE was evaluated.

RESULTS

Correlations of the EF and volumes, respectively, as determined by long-axis view methods increased with improving image quality: the Simpson biplane method was found to be the most accurate method, with good image quality for the EF (r = 0.946) and volumes (end-diastolic volume, r = 0.962; end-systolic volume, r = 0.989). Correlations of the EF and fractional area change by short-axis view methods decreased with improving image quality, with the Teichholz EF found to be most accurate with poor (r = 0.928) in contrast to good (r = 0.699) image quality.

CONCLUSIONS

With good image quality, the Simpson biplane method is the most accurate 2-dimensional method for assessing the left ventricular EF. Short-axis view methods, especially the Teichholz method yield better correlations with poor image quality. The eyeball method was unaffected by image quality.

Assessment of left ventricular size and function during cardiac surgery. An intraoperative evaluation of six two-dimensional echocardiographic methods with real time three-dimensional echocardiography as a reference

Transesophageal echocardiography is recommended to monitor left ventricular (LV) size and function in various operations. Generally, two-dimensional (2D) methods are applied intraoperatively. The aim of this study was to compare the accuracy and feasibility of 6 commonly used 2D methods to assess LV function during surgery. LV function in 120 consecutive patients was evaluated. Real time three-dimensional transesophageal echocardiograpy (3DTEE) served as reference. End-diastolic and end-systolic volumes and ejection fraction (EF) were analyzed with Simpson's method of discs (monoplane [MP] and biplane [BP]), eyeball method, Teichholz' method, and speckle tracking (ST) methods. Furthermore, fractional area change (FAC) and peak systolic pressure rise (dP/dt) were determined. Each 2D method was evaluated regarding correlation and agreement with 3DE, intra- and interobserver variability and the time required for evaluation. Simpson BP showed the strongest correlation and best agreement with 3DE for EF (limits of agreement 3.7 ± 11.6%) and volumes. Simpson MP showed similar agreement with 3DE compared to ST (2.8 ± 14.5% vs. 2.0 ± 15.3% and 3.8 ± 14.4% vs. 1.9 ± 15.6%, respectively). Both the eyeball method and Teichholz' method showed wide limits of agreement (-1.5 ± 18.2% and 5.2 ± 22.1%, respectively). DP/dt did not correlate with 3DE. FAC and ST FAC showed similar agreement. Application of 3DE (429 ± 108 seconds) took the longest time, and the eyeball method took the shortest time (8 ± 5 seconds) for analysis. Simpson BP is the most accurate intraoperative 2D method to evaluate LV function, followed by long-axis MP evaluations. Short-axis views were less accurate but may be suited for monitoring. We do not recommend using dP/dt.

Comparison of intraoperative three-dimensional Doppler color flow mapping to assess mitral regurgitation

BACKGROUND

Three-dimensional (3D) transesophageal echocardiography (TEE) enables the determination of the vena contracta area (VCA), which is an approved parameter to quantify mitral regurgitation (MR). The aim of this study was to determine the VCA in the operative setting and to compare it to alternative 3D and standard 2D methods, with respect to different etiologies of MR.

METHODS

MR in 56 consecutive patients undergoing cardiac surgery was evaluated using 2D and 3D TEE. VCA, vena contracta (VC), and effective regurgitation orifice area (EROA) by 3D and 2D flow convergence methods were determined. The correlations among the methods and the determined areas were evaluated.

RESULTS

EROA determination using 3D flow convergence areas correlated strongly with VCA (r = 0.653), however the resulting areas were considerably smaller. VC measurements in the 3D data set correlated slightly less (r = 0.629). EROA, which was determined using 2D flow convergence areas, showed the strongest correlation among the 2D methods (r = 0.406). 2D VC measurements showed weak to no correlation with VCA. Although a correlation was detected when using the biplane method or the midesophageal long-axis view to measure VC, statistical significance was only reached in functional MR and MR due to simple prolapse.

CONCLUSIONS

Intraoperative 3D methods to determine MR were feasible and showed improved correlation with VCA compared to 2D measurements. The agreement of 2D methods with VCA declined from functional MR to MR due to prolapse. We recommend the utilization of 3D color Doppler for intraoperative evaluation of MR, especially in patients with complex mitral valve prolapses.