Ex vivo permeation characteristics of venlafaxine through sheep nasal mucosa

Comprehensive evaluation of xylometazoline hydrochloride formulations: Ex-vivo and in-vitro studies

Xylometazoline is a well-established nasal decongestant that has been used alone and in combination with dexpanthenol as an over the counter (OTC) medicine. Considering the possibility of further improvement of xylometazoline nasal formulations, hyaluronic acid (HA) was evaluated as an additional ingredient. The aim of this study was to investigate the permeation, mucosal retention, and mucoadhesion properties of a new xylometazoline-HA [Xylo-HA] formulation ex vivo and to explore the potential benefits of incorporating HA in the formulation in vitro. Sheep nasal mucosa was used in the ex vivo study, where Xylo-HA was compared with xylometazoline alone [Xylo-Mono], and in combination with dexpanthenol [Xylo-Dex] to understand the impact of formulation changes. The permeation of xylometazoline was generally low (Xylo-Mono 11.14 ± 4.75 %, Xylo-HA 14.57 ± 5.72 % and Xylo-Dex 11.00 ± 3.05 % of the applied dose). The steady state fluxes of xylometazoline were determined as 12.64 ± 3.52 μg/cm2h, 14.94 ± 3.38 μg/cm2h and 12.19 ± 2.05 μg/cm2h for Xylo-Mono, Xylo-HA and Xylo-Dex, respectively. No significant differences were observed between the formulations in the permeation nor mucosal retention studies (p > 0.05 for all), while Xylo-HA exhibited superior mucoadhesive proprieties (p < 0.05 for all). The effects on wound healing and barrier integrity of the three xylometazoline formulations were tested in vitro on HaCaT cells. To better elucidate the role of HA, an additional HA formulation without xylometazoline was prepared (HA-Mono). A scratch test was performed to evaluate wound healing, revealing that the test formulations did not achieve complete wound closure within 72 h and demonstrated a similar effect at the end of the testing period. To assess the effect on barrier integrity, cells were treated for 5 days with daily measurements of transepithelial electrical resistance (TEER). At the end of the experiment, Xylo-Dex showed a moderate 14 % increase in TEER, while Xylo-Mono did not significantly affect this parameter. TEER rose by 951 % in the Xylo-HA, and by 10497 % in the HA group, suggesting that incorporating HA led to enhanced barrier function. Further clinical studies are recommended to better understand the clinical implications and efficacy of the Xylo-HA formulation, with particular focus on the role of HA.

Customized Intranasal Hydrogel Delivering Methylene Blue Ameliorates Cognitive Dysfunction against Alzheimer's Disease

The accumulation of hyperphosphorylated tau protein aggregates is a key pathogenic event in Alzheimer's disease (AD) and induces mitochondrial dysfunction and reactive oxygen species overproduction. However, the treatment of AD remains challenging owning to the hindrance caused by the blood-brain barrier (BBB) and the complex pathology of AD. Nasal delivery represents an effective means of circumventing the BBB and delivering drugs to the brain. In this study, black phosphorus (BP) is used as a drug carrier, as well as an antioxidant, and loaded with a tau aggregation inhibitor, methylene blue (MB), to obtain BP-MB. For intranasal (IN) delivery, a thermosensitive hydrogel is fabricated by cross-linking carboxymethyl chitosan and aldehyde Pluronic F127 (F127-CHO) micelles. The BP-MB nanocomposite is incorporated into the hydrogel to obtain BP-MB@Gel. BP-MB@Gel could be injected intranasally, providing high nasal mucosal retention and controlled drug release. After IN administration, BP-MB is continuously released and delivered to the brain, exerting synergistic therapeutic effects by suppressing tau neuropathology, restoring mitochondrial function, and alleviating neuroinflammation, thus inducing cognitive improvements in mouse models of AD. These findings highlight a potential strategy for brain-targeted drug delivery in the management of the complex pathologies of AD.

Development of favipiravir dry powders for intranasal delivery: An integrated cocrystal and particle engineering approach via spray freeze drying

The therapeutic potential of pharmaceutical cocrystals in intranasal applications remains largely unexplored despite progressive advancements in cocrystal research. We present the application of spray freeze drying (SFD) in successful fabrication of a favipiravir-pyridinecarboxamide cocrystal nasal powder formulation for potential treatment of broad-spectrum antiviral infections. Preliminary screening via mechanochemistry revealed that favipiravir (FAV) can cocrystallize with isonicotinamide (INA), but not nicotinamide (NCT) and picolinamide (PIC) notwithstanding their structural similarity. The cocrystal formation was characterized by differential scanning calorimetry, Fourier-transform infrared spectroscopy, and unit cell determination through Rietveld refinement of powder X-ray analysis. FAV-INA crystalized in a monoclinic space group P21/c with a unit cell volume of 1223.54(3) Å3, accommodating one FAV molecule and one INA molecule in the asymmetric unit. The cocrystal was further reproduced as intranasal dry powders by SFD, of which the morphology, particle size, in vitro drug release, and nasal deposition were assessed. The non-porous flake shaped FAV-INA powders exhibited a mean particle size of 19.79 ± 2.61 μm, rendering its suitability for intranasal delivery. Compared with raw FAV, FAV-INA displayed a 3-fold higher cumulative fraction of drug permeated in Franz diffusion cells at 45 min (p = 0.001). Dose fraction of FAV-INA deposited in the nasal fraction of a customized 3D-printed nasal cast reached over 80 %, whereas the fine particle fraction remained below 6 % at a flow rate of 15 L/min, suggesting high nasal deposition whilst minimal lung deposition. FAV-INA was safe in RPMI 2650 nasal and SH-SY5Y neuroblastoma cells without any in vitro cytotoxicity observed. This study demonstrated that combining the merits of cocrystallization and particle engineering via SFD can propel the development of advanced dry powder formulations for intranasal drug delivery.

Intranasal administration of innovative triamcinolone acetonide encapsulated cubosomal in situ gel: formulation and characterization

AIM

The primary objective of the research was to develop a cubosomal in situ gel encapsulated with Triamcinolone acetonide (TCA) in order to enhance its penetration through the blood-brain barrier (BBB) when administered via the intranasal route, thus enabling efficient and rapid action.

METHOD

Cubosomes were formulated by top-down approach using glyceryl monooleate (GMO), using pluronics127 (PF127) and polyvinyl alcohol (PVA) in varying proportions based on the Box-Behnken design. High resolution transmission electron microscopy (HR-TEM) analysis confirmed the morphology of the cubosomes. The in situ gel was formulated and optimized. Experiments involving ex vivo permeation and histopathology analyses were undertaken to evaluate drug permeation and tissue effects.

RESULTS

The cubosomes exhibited a particle size (PS) of 197.9 nm, zeta potential (ZP) of -31.11 mV, and entrapment efficacy (EE) of 84.31%, with low deviation. Batch F4 (19% PF127) showed favorable results. In vitro and ex vivo permeation studies revealed drug release of 78.59% and 76.65%, respectively, after 8 h. Drug release followed the Hixson Crowell model of release kinetics. The histopathological examination revealed no signs of toxicity or adverse effects on the nasal mucosa of the sheep. The formulation exhibited short-term stability, maintaining its integrity and properties when stored at room temperature.

CONCLUSION

The utilization of an intranasal cubosomal in situ gel encapsulated with TCA was anticipated to lower intracranial pressure and improve patient adherence by offering effective relief for individuals suffering from Brain edema. This efficacy is attributed to its rapid onset of action and its safe and well-tolerated dosage form.

Quality by design for sumatriptan loaded nano-ethosomal mucoadhesive gel for the therapeutic management of nitroglycerin induced migraine

Migraine is a progressive neurological condition often accompanied by nausea and vomiting. Various drugs have recently been used in the treatment of migraine, including sumatriptan (SUT). However, SUT has poor pharmacological effects mainly due to its reduced permeability, blood brain barrier (BBB) effect, half-life and bioavailability. Herein, we developed SUT loaded nano-ethosomes (SUT-NEs) for intranasal (IN) delivery, after their incorporation into chitosan based mucoadhesive gel (SUT-NEsG). The observed mean particle size of SUT-NEs was 109.45 ± 4.03 nm with spherical morphology, mono dispersion (0.191 ± 0.001), negatively charged (-20.90 ± 1.98 mV) and with excellent entrapment efficiency (96.90 ± 1.85 %). Fourier-transform infrared (FTIR) spectra have depicted the compatibility of the components. Moreover, SUT-NEsG was homogeneous having suitable viscosity and mucoadhesive strength. In vitro release and ex vivo permeation analysis showed sustained release and improved permeation of the SUT-NEsG, respectively. Additionally, histopathological studies of nasal membrane affirmed the safety of SUT-NEsG after IN application. In vivo pharmacokinetic study demonstrated improved brain bioavailability of SUT-NEsG as compared to orally administered sumatriptan solution (SUT-SL). Furthermore, significantly enhanced pharmacological effect of SUT-NEsG was observed in behavioral and biochemical analysis, immunohistochemistry for NF-κB, and enzyme linked immuno assay (ELISA) for IL-1β and TNF-α in Nitroglycerin (NTG) induced migraine model. It can be concluded that migraine may be successfully managed through IN application of SUT-NEsG owing to the direct targeted delivery to the brain.

Propranolol-Loaded Limonene-Based Microemulsion Thermo-Responsive Mucoadhesive Nasal Nanogel: Design, In Vitro Assessment, Ex Vivo Permeation, and Brain Biodistribution

Propranolol is the first-line drug for managing migraine attacks. D-limonene is a citrus oil known for its neuroprotective mechanism. Thus, the current work aims to design a thermo-responsive intranasal limonene-based microemulsion mucoadhesive nanogel to improve propranolol efficacy. Microemulsion was fabricated using limonene and Gelucire^® as the oily phase, Labrasol^®, Labrafil^®, and deionized water as the aqueous phase, and was characterized regarding its physicochemical features. The microemulsion was loaded in thermo-responsive nanogel and evaluated regarding its physical and chemical properties, in vitro release, and ex vivo permeability through sheep nasal tissues. Its safety profile was assessed via histopathological examination, and its capability to deliver propranolol effectively to rats' brains was examined using brain biodistribution analysis. Limonene-based microemulsion was of 133.7 ± 0.513 nm diametric size with unimodal size distribution and spheroidal shape. The nanogel showed ideal characteristics with good mucoadhesive properties and in vitro controlled release with 1.43-fold enhancement in ex vivo nasal permeability compared with the control gel. Furthermore, it displayed a safe profile as elucidated by the nasal histopathological features. The nanogel was able to improve propranolol brain availability with C_max 970.3 ± 43.94 ng/g significantly higher than the control group (277.7 ± 29.71 ng/g) and with 382.4 % relative central availability, which confirms its potential for migraine management.

Nose-to-brain delivery of paliperidone palmitate poloxamer-guar gum nanogel: Formulation, optimization and pharmacological studies in rats

Oral delivery of paliperidone palmitate (PPD), a potent antipsychotic agent, has been reported with a potential risk of very serious drug-induced adverse events such as tachycardia, hyperprolactinemia, sexual dysfunction, and neutropenia. Alternatively, the potential of nasal delivery has also been explored to treat CNS complications by delivering the medicines directly to the brain bypassing the blood-brain barrier. Hence, the objectives of current work were to formulate, design, optimize, and investigate the therapeutic potency of PPD-loaded intranasal in-situ gel (PPGISG) in the treatment of schizophrenia. PPD-nanoemulsion (PNE) was fabricated using water titration technique, was further optimized via Box-Behnken design. Furthermore, the optimized PNE was evaluated for parameters such as globule size, polydispersity index, zeta potential, and % entrapment efficiency were found to be 21.44±1.58nm, 0.268±0.02, -25.56±1.6mV, and 99.89±0.25%, respectively. PNE was further converted to PPGISG utilizing two polymers, poloxamer, and guar gum. Simultaneously, ex-vivo permeation for PNE, PPGISG, and PPD-suspension was found to be 211.40±4.8, 297.89±3.9 and 98.66±1.6μg/cm², respectively. While PPGISG nanoparticles showed 1.58 and 5.65-folds more J_ss than PNE and PPD-suspension. Behavioral studies confirmed that no extrapyramidal symptoms were observed in experimental animals post intranasal administration. Finally, the outcomes of the in-vivo hemato-compatibility study proved that intranasal formulation did not cause any alteration in leukocytes, RBCs, and neutrophils count. Therefore, intranasal delivery of PPGISG can be considered a novel tool for the safe delivery of PPD in schizophrenic patients.

Self-Assembling Lecithin-Based Mixed Polymeric Micelles for Nose to Brain Delivery of Clozapine: In-vivo Assessment of Drug Efficacy via Radiobiological Evaluation

Purpose

The research objective is to design intranasal brain targeted CLZ loaded lecithin based polymeric micelles (CLZ- LbPM) aiming to improve central systemic CLZ bioavailability.

Methods

In our study, intranasal CLZ loaded lecithin based polymeric micelles (CLZ- LbPM) were formulated using soya phosphatidyl choline (SPC) and sodium deoxycholate (SDC) with different CLZ:SPC:SDC ratios via thin film hydration technique aiming to enhance drug solubility, bioavailability and nose to brain targeting efficiency. Optimization of the prepared CLZ-LbPM using Design-Expert® software was achieved showing that M6 which composed of (CLZ:SPC: SDC) in respective ratios of 1:3:10 was selected as the optimized formula. The optimized formula was subjected to further evaluation tests as, Differential Scanning Calorimetry (DSC), TEM, in vitro release profile, ex vivo intranasal permeation and in vivo biodistribution.

Results

The optimized formula with the highest desirability exhibiting (0.845), small particle size (12.23±4.76 nm), Zeta potential of (-38 mV), percent entrapment efficiency of > 90% and percent drug loading of 6.47%. Ex vivo permeation test showed flux value of 27 μg/cm².h and the enhancement ratio was about 3 when compared to the drug suspension, without any histological alteration. The radioiodinated clozapine ([¹³¹I] iodo-CLZ) and radioiodinated optimized formula ([¹³¹I] iodo-CLZ-LbPM) were formulated in an excellent radioiodination yield more than 95%. In vivo biodistribution studies of [¹³¹I] iodo-CLZ-LbPM showed higher brain uptake (7.8%± 0.1%ID/g) for intranasal administration with rapid onset of action (at 0.25 h) than the intravenous formula. Its pharmacokinetic behavior showed relative bioavailability, direct transport percentage from nose to brain and drug targeting efficiency of 170.59%, 83.42% and 117% respectively.

Conclusion

The intranasal self-assembling lecithin based mixed polymeric micelles could be an encouraging way for CLZ brain targeting.

In vitro and ex vivo experimental models for evaluation of intranasal systemic drug delivery as well as direct nose-to-brain drug delivery

The intranasal route of administration provides a noninvasive method to deliver drugs into the systemic circulation and/or directly into the brain. Direct nose-to-brain drug delivery offers the possibility to treat central nervous system diseases more effectively, as it can evade the blood-brain barrier. In vitro and ex vivo intranasal models provide a means to investigate physiological and pharmaceutical factors that could play a role in drug delivery across the nasal epithelium as well as to determine the mechanisms involved in drug absorption from the nose. The development and implementation of cost-effective pharmacokinetic models for intranasal drug delivery with good in vitro-in vivo correlation can accelerate pharmaceutical drug product development and improve economic and ecological aspects by reducing the time and costs spent on animal studies. Special considerations should be made with regard to the purpose of the in vitro/ex vivo study, namely, whether it is intended to predict systemic or brain delivery, source and site of tissue or cell sampling, viability window of selected model, and the experimental setup of diffusion chambers. The type of model implemented should suit the relevant needs and requirements of the project, researcher, and interlaboratory. This review aims to provide an overview of in vitro and ex vivo models that have been developed to study intranasal and direct nose-to-brain drug delivery.

Development of favipiravir loaded PLGA nanoparticles entrapped in in-situ gel for treatment of Covid-19 via nasal route

In 2019 the emergence of SARS-COV-2 caused pandemic situation worldwide and claimed ∼6.4 M lives (WHO 2022). Favipiravir (FAV) is recommended as a therapy for Covid-19 which belongs to BCS class III with a short half-life of 2-5.5h. Thus, the objective of current study was the development of favipiravir loaded PLGA nanoparticles (NPs) by box-behnken design. Moreover, these NPs were entrapped in thermosensitive gel to increase the permeation through nasal route. The nanoparticles exhibit particle size of 175.6 ± 2 nm with >70 ± 0.5 %EE. NPs showed PDI (0.130) and zeta potential (-17.1 mV) suggesting homogeneity and stability of NPs. DSC, XRD, and FTIR studies concluded absence of any interaction of FAV and the excipients. SEM and AFM studies demonstrated spherical morphology of NPs with smooth surface. The NPs entrapped in-situ gel showed clarity and pH 5.5-6.1. The gelation temperature of NPs dispersed in-situ gel was found in the range of 35 °C -37 °C. The gel has viscosity in range of 34592-4568 cps. The texture analysis profile of gel showed good gelling properties. Dissolution study suggested a sustained release of FAV from NPs (24h) and NPs dispersed gel (32h) as compared to FAV solution (4h). The gel showed good mucoadhesion properties (9373.9 dyne/cm²). Ex-vivo permeation through nasal mucosa of goat elucidated NPs dispersed gel demonstrated significantly higher permeation than solution and NPs. Therefore, it would be a prospective formulation to combat Covid-19 infection with high patient compliance.

Formulation of Chitosan Microparticles for Enhanced Intranasal Macromolecular Compound Delivery: Factors That Influence Particle Size during Ionic Gelation

Therapeutic macromolecules (e.g., protein and peptide drugs) present bioavailability challenges via extravascular administration. The nasal route presents an alternative non-invasive route for these drugs, although low bioavailability remains challenging. Co-administration of permeation enhancers is a promising formulation approach to improve the delivery of poorly bioavailable drugs. The aim of this study was to prepare and characterize chitosan microparticulate formulations containing a macromolecular model compound (fluorescein isothiocyanate dextran 4400, FD-4) and a bioenhancer (piperine). Ionic gelation was used to produce chitosan microparticle delivery systems with two distinct microparticle sizes, differing one order of magnitude in size (±20 µm and ±200 µm). These two microparticle delivery systems were formulated into thermosensitive gels and their drug delivery performance was evaluated across ovine nasal epithelial tissues. Dissolution studies revealed a biphasic release pattern. Rheometry results demonstrated a sol-to-gel transition of the thermosensitive gel formulation at a temperature of 34 °C. The microparticles incorporating piperine showed a 1.2-fold increase in FD-4 delivery across the excised ovine nasal epithelial tissues as compared to microparticles without piperine. This study therefore contributed to advancements in ionic gelation methods for the formulation of particulate systems to enhance macromolecular nasal drug delivery.

Formulation-by-Design of Efinaconazole Spanlastic Nanovesicles for Transungual Delivery Using Statistical Risk Management and Multivariate Analytical Techniques

As regulatory and technical landscapes for pharmaceutical formulation development are rapidly evolving, a risk-management approach using multivariate analysis is highly essential for designing a product with requisite critical quality attributes (CQA). Efinaconazole, a newly approved poorly water-soluble antifungal triazole drug has poor permeability. Spanlastics, new-generation surfactant nanovesicles, being fluidic, help improve the permeability of drugs. Therefore, we optimized efinaconazole spanlastics using the concepts of Formulation-by-Design (FbD) and explored the feasibility of transungual delivery for the management of onychomycosis. Using the Ishikawa fishbone diagram, the risk factors that may have an impact on the CQA of efinaconazole spanlastic vesicles were identified. Application of the Plackett–Burman experimental design facilitated the screening of eight different formulation and process parameters influencing particle size, transmittance, relative deformability, zeta potential, entrapment efficiency, and dissolution efficiency. With the help of Pareto charts, the three most significant factors were identified, viz., vesicle builder (Span), edge activator (Tween), and mixing time. The levels of these three critical variables were optimized by FbD to reduce the particle size and maximize the transparency, relative deformability, encapsulation efficiency, and dissolution efficiency of efinaconazole spanlastic nanovesicles. Bayesian and Lenth’s analysis and mathematical modeling of the experimental data helped to quantify the critical formulation attributes required for getting the formulation with optimum quality features. The optimized efinaconazole-loaded spanlastic vesicles had a particle size of 197 nm, transparency of 91%, relative deformability of 12.5 min, and dissolution efficiency of 81.23%. The spanlastic formulation was incorporated into a gel and explored ex vivo for transungual delivery. This explorative study provides an example of the application of principles of risk management, statistical multivariate analysis, and the FbD approach in developing efinaconazole spanlastic nanovesicles.

Chitosan Nanoparticles for Meloxicam Ocular Delivery: Development, In Vitro Characterization, and In Vivo Evaluation in a Rabbit Eye Model

Eye inflammation is considered one of the most common co-morbidities associated with ocular disorders and surgeries. Conventional management of this condition with non-steroidal anti-inflammatory drugs as eye drops is associated with low corneal bioavailability and ocular irritancy. In the current study, we first investigated the capacity of different solvent systems to enhance the solubility of Meloxicam (MLX). Then, we prepared chitosan nanoparticles loaded with meloxicam (MLX-CS-NPs) through electrostatic interaction between the cationic chitosan and the anionic MLX using either 100% v/v polyethylene glycol 400 or 0.25% w/v tripolyphosphate solution as solvents based on the MLX solubility data. In further studies, MLX-CS-NPs were characterized in vitro and assessed for their ex vivo corneal and scleral permeability. The morphology, average particle size (195–597 nm), zeta potential (25–54 mV), and percent entrapment efficiencies (70–96%) of the prepared MLX-CS-NPs were evaluated. The in vitro release study of MLX from the selected MLX-CS-NPs showed a sustained drug release for 72 h with accepted flux and permeation through the cornea and sclera of rabbits. In the in vivo studies, MLX-CS-NPs eye drop dispersion showed enhanced anti-inflammatory activity and no ocular irritancy compared to MLX-eye drop solution. Our findings suggest the potential for using chitosan nanotechnology for ocular delivery of MLX with high contact time and activity.

Development of Lomustine and n-Propyl Gallate Co-Encapsulated Liposomes for Targeting Glioblastoma Multiforme via Intranasal Administration

This work aimed to develop lomustine (LOM) and n-propyl gallate (PG)-loaded liposomes suitable for targeting glioblastoma multiforme (GBM) via the auspicious nose-to-brain drug delivery pathway. The therapeutical effect of LOM, as a nitrosourea compound, can be potentiated by PG suitable for enhanced anti-cancer therapy. Nose-to-brain delivery of PG and LOM combined in liposomes can overcome the poor water solubility, absorption properties, and toxicity issues in the systemic circulation. Optimization and characterization of the liposomal carrier with binary drug contents were carried out in order to achieve adequate encapsulation efficiency, loading capacity, drug release, and ex vivo permeation. The optimized liposome co-encapsulated with both drugs showed suitable Z-average (127 ± 6.9 nm), size distribution (polydispersity index of 0.142 ± 0.009), zeta potential (−34 ± 1.7 mV), and high encapsulation efficacy (63.57 ± 1.3% of PG and 73.45 ± 2.2% of LOM, respectively) meeting the acceptance criteria of nose-to-brain transport for both drugs. MTT assays of PG-LOM formulations were also conducted on NIH/3T3 (murine embryonic fibroblast), U87 (glioblastoma), and A2780 (ovarian cancer) cell lines indicating reduced an antiproliferative effect on all types of cells. Our results supported the use of this novel combination of LOM and PG in a liposomal formulation as a promising carrier for glioblastoma targeting via the intranasal route.

Abdelgawad M, Ghoneim MM, Abdou EM. Assessment of Nasal-Brain-Targeting Efficiency of New Developed Mucoadhesive Emulsomes Encapsulating an Anti-Migraine Drug for Effective Treatment of One of the Major Psychiatric Disorders Symptoms

Migraine is one of the major symptoms of many psychiatric and mental disorders like depression and anxiety. Eletriptan Hydrobromide (EH) is a well-tolerated drug in migraine treatment, but suffers from low oral bioavailability and low brain targeting after oral delivery. New nasal mucoadhesive EH-emulsomes development could be a new means to direct the drug from the nose-to-brain to achieve rapid onset of action and high drug concentration in the brain for acute migraine treatment. Eletriptan mucoadhesive emulsomes formulations were prepared using thin-film hydration method and 2³ full factorial design was adopted to study different formulation factors’ effect on the emulsomes characters. The emulsomes were characterized for entrapment efficiency (EE%), zeta potential (ZP), particle size (PS), morphology, and ex-vivo permeation through the nasal mucosa. The selected formula was evaluated in mice for its in-vivo bio-distribution in comparison with EH intranasal and intravenous solutions. Drug targeting efficacy (DTE%) and nose-to-brain direct transport percentage (DTP%) were calculated. The optimization formulation showed a nanoparticle size of 177.01 nm, EE 79.44%, and ZP = 32.12 ± 3.28 mV. In addition, in-vitro permeability studies revealed enhanced drug permeability with suitable mean residence time up to 120 ± 13 min. EH-emulsomes were stable under different storage conditions for three months. In vivo examination and pharmacokinetic drug targeting parameters revealed EH transport to the CNS after EH nanoparticle nasal administration. Histopathology study showed no ciliotoxic effect on the nasal mucosa. From the results, it can be confirmed that the emulsomes formulation of EH proved safe direct nose-to-brain transport of EH after nasal administration of EH emulsomes.

Clozapine-Encapsulated Binary Mixed Micelles in Thermosensitive Sol-Gels for Intranasal Administration

(1) Background: Clozapine is the most effective antipsychotic. It is, however, associated with many adverse drug reactions. Nose-to-brain (N2B) delivery offers a promising approach. This study aims to develop clozapine-encapsulated thermosensitive sol-gels for N2B delivery. (2) Methods: Poloxamer 407 and hydroxypropyl methylcellulose were mixed and hydrated with water. Glycerin and carbopol solutions were added to the mixture and stirred overnight at 2-8 °C. Clozapine 0.1% w/w was stirred with polysorbate 20 (PS20) or polysorbate 80 (PS80) at RT (25 °C) before being added to the polymer solution. The final formulation was made to 10 g with water, stirred overnight at 2-8 °C and then adjusted to pH 5.5. (3) Results: Formulations F3 (3% PS20) and F4 (3% PS80) were selected for further evaluation, as their gelation temperatures were near 28 °C. The hydrodynamic particle diameter of clozapine was 18.7 ± 0.2 nm in F3 and 20.0 ± 0.4 nm in F4. The results show a crystallinity change in clozapine to amorphous. Drug release studies showed a 59.1 ± 3.0% (F3) and 53.1 ± 2.7% (F4) clozapine release after 72 h. Clozapine permeated after 8 h was 20.8 ± 3.0% (F3) and 17.8 ± 3.1% (F4). The drug deposition was higher with F4 (144.8 ± 1.4 µg/g) than F3 (110.7 ± 2.7 µg/g). Both sol-gels showed no phase separation after 3 months. (4) Conclusions: Binary PS80-P407 mixed micelles were more thermodynamically stable and rigid due to the higher synergism of both surfactants. However, binary mixed PS20-P407 micelles showed better drug permeation across the nasal mucosa tissue and may be a preferable carrier system for the intranasal administration of clozapine.

Comparison of RPMI 2650 cell layers and excised sheep nasal epithelial tissues in terms of nasal drug delivery and immunocytochemistry properties

Nasal drug administration has been identified as a potential alternative to oral drug administration, especially for systemic delivery of large molecular weight compounds. Major advantages of nasal drug delivery include high vascularity and permeability of the epithelial membranes as well as circumvention of first-pass metabolism. RPMI 2650 cell layers (in vitro cell model) and excised sheep nasal mucosal tissues (ex vivo sheep model) were evaluated with regard to epithelial thickness, selected tight junction protein expression (i.e. claudin-1, F-actin chains, zonula occludin-1), extent of p-glycoprotein (P-gp) related efflux of a model compound (Rhodamine-123, R123) and paracellular permeation of a large molecular weight model compound (FITC-dextran 4400, FD4). The cell model grown under liquid cover conditions (LCC) was thinner (24 ± 4 μm) than the epithelial layer of the sheep model (53 ± 4 μm), whereas the thickness of cell model grown under air liquid interface (ALI) conditions (53 ± 8 μm) compared well with that of the sheep model. Although the location and distribution of tight junction proteins and F-actin differed to some extent between the cell model grown under ALI conditions and the sheep model, the extent of paracellular permeation of FD4 was similar (P_app = 0.48 × 10^-6 cm.s^-1 and 0.46 × 10^-6 cm.s^-1, respectively). Furthermore, the bi-directional permeation of R123 yielded the same efflux ratio (ER = 2.33) in both models. The permeation results from this exploratory study indicated similarity in terms of compound permeation between the RPMI 2650 nasal epithelial cell line and the excised sheep nasal epithelial tissue model.

Nose-to-brain delivery of amisulpride-loaded lipid-based poloxamer-gellan gum nanoemulgel: In vitro and in vivo pharmacological studies

Unfavorable side effects of available antipsychotics limit the use of conventional delivery systems, where limited exposure of the drugs to the systemic circulation could reduce the associated risks. The potential of intranasal delivery is gaining interest to treat brain disorders by delivering the drugs directly to the brain circumventing the tight junctions of the blood-brain barrier with limited systemic exposure of the entrapped therapeutic. Therefore, the present research was aimed to fabricate, optimize and investigate the therapeutic efficacy of amisulpride (AMS)-loaded intranasal in situ nanoemulgel (AMS-NG) in the treatment of schizophrenia. In this context, AMS nanoemulsion (AMS-NE) was prepared by employing aqueous-titration method and optimized using Box-Behnken statistical design. The optimized nanoemulsion was subjected to evaluation of globule size, transmittance, zeta potential, and mucoadhesive strength, which were found to be 92.15 nm, 99.57%, -18.22 mV, and 8.90 g, respectively. The AMS-NE was converted to AMS-NG using poloxamer 407 and gellan gum. Following pharmacokinetic evaluation in Wistar rats, the brain C_max for intranasal AMS-NG was found to be 1.48-folds and 3.39-folds higher when compared to intranasal AMS-NE and intravenous AMS-NE, respectively. Moreover, behavioral investigations of developed formulations were devoid of any extrapyramidal side effects in the experimental model. Finally, outcomes of the in vivo hematological study confirmed that intranasal administration of formulation for 28 days did not alter leukocytes and agranulocytes count. In conclusion, the promising results of the developed and optimized intranasal AMS-NG could provide a novel platform for the effective and safe delivery of AMS in schizophrenic patients.

Ion-Triggered In Situ Gelling Nanoemulgel as a Platform for Nose-to-Brain Delivery of Small Lipophilic Molecules

Background: Intranasal route offers a direct nose-to-brain delivery via olfactory and trigeminal nerves and minimizes the systemic exposure of the drug. Although reliable and non-invasive, intranasal administration of lipophilic neuroprotective agents for brain targeting is still challenging. Literature focuses on naturally-derived compounds as a promising therapeutics for chronic brain diseases. Naringin, a natural flavonoid obtained from citrus fruits possesses neuroprotective effects. By regulating multiple crucial cellular signaling pathways, naringin acts on several therapeutic targets that make it suitable for the treatment of neurodegenerative diseases like Alzheimer’s disease and making it a suitable candidate for nasal administration. However, the hydrophobicity of naringin is the primary challenge to formulate it in an aqueous system for nasal administration. Method: We designed a lipid-based nanoemulsifying drug delivery system of naringin using Acrysol K140 as an oil, Tween 80 as a surfactant and Transcutol HP as a cosolvent, to improve solubility and harness the benefits of nanosizing like improved cellular penetration. Intranasal instillations of therapeutic agents have limited efficacy due to drug washout and inadequate adherence to the nasal mucosa. Therefore, we reconstituted the naringin self-emulsifying system in a smart, biodegradable, ion-triggered in situ gelling hydrogel and optimized for desirable gel characteristics. The naringin-loaded composition was optimized and characterized for various physicochemical and rheological properties. Results: The formulation showed a mean droplet size 152.03 ± 4.6 nm with a polydispersity index <0.23. Ex vivo transmucosal permeation kinetics of the developed formulation through sheep nasal mucosa showed sustained diffusion and enhanced steady-state flux and permeability coefficient. Scanning and transmission electron microscopy revealed the spherical shape of emulsion droplets and entrapment of droplets in a gel structure. The formulation showed excellent biocompatibility as analyzed from the viability of L929 fibroblast cells and nasal mucosa histopathology after treatment. In vivo biodistribution studies revealed significantly higher drug transport and brain targeting efficiency. Conclusion: In situ gelling system with nanoemulsified naringin demonstrated a safe nasal delivery providing a new dimension to the treatment of chronic neurodegenerative diseases using small hydrophobic phytoconstituents with minimization of dose and related systemic adverse effects.

The Development of an In Vitro Horizontal Diffusion Cell to Monitor Nasal Powder Penetration Inline

The development of in vitro investigation models could be important using sensitive and fast methods during formulation. Intranasal applied drugs (meloxicam, lamotrigine, and levodopa) avoid the gastrointestinal tract and can achieve higher bioavailability, therefore a penetration extent is a key property. In this study, the in vitro adaptability of a modified horizontal diffusion cell was tested by using these model active pharmaceutical ingredients (APIs). The special factors consisted of the volume of the chambers, the arrangement of the stirrers, the design of probe input for real-time analysis and decreased membrane area. Membranes were impregnated by isopropyl myristate and by using phosphate buffer to evaluate the effect of API hydrophilicity on the diffusion properties. The lipophilicity of the API was proportional to the penetration extent through isopropyl myristate-impregnated membranes compared with buffer-soaked membranes. After evaluating the arithmetic mean of standard relative deviations and the penetrated extent of APIs at 15 min, Metricel^® could be suggested for levodopa and meloxicam, and Whatman™ for lamotrigine. The modified model is suitable for inline, real-time detection, at nasal conditions, using small volumes of phases, impregnated membrane, to monitor the diffusion of the drug and to determine its concentration in the acceptor and donor phases.

Design, development and in-vitro/in-vivo evaluation of intranasally delivered Rivastigmine and N-Acetyl Cysteine loaded bifunctional niosomes for applications in combinative treatment of Alzheimer's disease

The present investigation explores the potential of novel dual drug-loaded niosomes for nasal delivery of Rivastigmine (RIV) and N-Acetyl Cysteine (NAC) to the brain. The dual niosomes showed a particle size of 162.4 nm and % entrapment efficiencies of 97.7% for RIV and 85.9% for NAC. The niosomes were statistically validated using Box-Behnken experimental design (BBD) with good significance. Ultrastructural and chemical characterization of the niosomes using various analytical techniques like Fourier Transform Infrared spectroscopy (FTIR), Differential scanning calorimetry (DSC), Transmission electron microscopy (TEM) showcased drug-excipient compatibility and robust stability of 6 months in a liquid state at 4-8 °C. The dual drug-loaded niosomes showed a sustained drug release pattern up to 2 days. Acetylcholinesterase (AChE) and DPPH (1, 1-diphenyl-2- picrylhydrazyl) enzyme inhibition assays showed a better combinative effect than the free drug solutions. A 2-day nasal permeation proved the effectiveness and biocompatibility of the niosomes. In-vivo pharmacokinetic and organ biodistribution studies revealed a better drug profile and greater distribution of the niosomes in the brain compared to other organs, thereby indicating a direct nose-to-brain delivery of the niosomes.

Novel lipid-polymer hybrid nanoparticles incorporated in thermosensitive in situ gel for intranasal delivery of terbutaline sulphate

AIM

The present work aimed to improve the bioavailability of terbutaline sulphate (TS) and to prolong its nasal residence time for the treatment of asthma.

METHODS

Chitosan/pectin polyelectrolyte complex nanoparticles (CS/PC) were prepared by ionic gelation method and coated with phospholipid (PL) and then incorporated into optimised thermosensitive in situ gel.

RESULTS

The optimal PL-coated nanoparticle formulation (LP1) showed the smallest particle size (345.5 nm), the highest zeta potential (32.9 mV) and the greatest percent drug released after 6 h (71%). The optimum in situ gel loaded with LP1 (NG3) showed three times greater permeation through nasal mucosa than aqueous solution of TS and revealed about 94% and 92% of the effect of IV injection of drug solution on tidal volume and peak expiratory flow in histamine treated rats, respectively.

CONCLUSION

The developed PL-coated CS/PC/in situ gel could be considered as a promising intranasal formulation of TS for asthma management.

Stimuli-responsive In situ gelling system for nose-to-brain drug delivery

The diagnosis and treatment of neurological ailments always remain an utmost challenge for research fraternity due to the presence of BBB. The intranasal route appeared as an attractive and alternative route for brain targeting of therapeutics without the intrusion of BBB and GI exposure. This route directly and effectively delivers the therapeutics to different regions of the brain via olfactory and trigeminal nerve pathways. However, shorter drug retention time and mucociliary clearance curtail the efficiency of the intranasal route. The in situ mucoadhesive gel overthrow the limitations of direct nose-to-brain delivery by not only enhancing nasal residence time but also minimizing the mucociliary clearance and enzymatic degradation. This delivery system further improves the nasal absorption as well as bioavailability of drugs in the brain. The in situ mucoadhesive gel is a controlled and sustained release system that facilitates the absorption of various proteins, peptides and other larger lipophilic and hydrophilic moieties. Owing to multiple benefits, in situ gelling system has been widely explored to target the brain via nasal route. However, very few review works are reported which explains the application of in situ nasal gel for brain delivery of CNS acting moieties. Hence, in this piece of work, we have initially discussed the global statistics of neurological disorders reported by WHO and other reputed organizations, nasal anatomy, mechanism and challenges of nose-to-brain drug delivery. The work mainly focused on the use of different stimuli-responsive polymers, specifically thermoresponsive, pH-responsive, and ion triggered systems for the development of an effective and controlled dosage form, i.e., in situ nasal gel for brain targeting of bioactives. We have also highlighted the origin, structure, nature and phase transition behavior of the smart polymers found suitable for nasal administration, including poloxamer, chitosan, EHEC, xyloglucan, Carbopol, gellan gum and DGG along with their application in the treatment of neurological disorders. The article is aimed to gather all the information of the past 10 years related to the development and application of stimuli-responsive in situ nasal gel for brain drug delivery.

Intranasal Niosomal In Situ Gel as a Promising Approach for Enhancing Flibanserin Bioavailability and Brain Delivery: In Vitro Optimization and Ex Vivo/In Vivo Evaluation

Flibanserin (FLB) is a multifunctional serotonergic agent that was recently approved by the FDA for the oral treatment of premenopausal women with hypoactive sexual desire disorder. FLB is a centrally acting drug that has a low oral bioavailability of 33% owing to its exposure to the hepatic first-pass effect, as well as its pH-dependent solubility, which could be an obstacle hindering the drug dissolution and absorption via mucosal barriers. Thus, this work aimed at overcoming the aforementioned drawbacks and promoting the nose-to-brain delivery of FLB via the formulation of an intra-nasal in situ niosomal gel. The Box-Behnken design was employed to study the impact of Span® 85 concentration (X1), hydration time (X2), and pH of the hydrating buffer (X3) on the vesicle size and drug entrapment. The optimized formulation exhibited a spherical shape with a vesicular size of 46.35 nm and entrapment efficiency of 92.48%. The optimized FLB niosomes integrated into gellan gum-based in situ gel exhibited enhanced ex vivo permeation and improved plasma and brain concentrations after nasal administration in rats compared to raw FLB. These findings highlight the capability of the proposed intra-nasal FLB niosomal in situ gel to boost the drug bioavailability and to promote its direct delivery to the brain.

Nano-emulgel: Emerging as a Smarter Topical Lipidic Emulsion-based Nanocarrier for Skin Healthcare Applications

BACKGROUND

In recent decades, enormous efforts for different drug discovery processes have led to a number of drug molecules available today to overcome different challenges of the health care system. Unfortunately, more than half of these drugs are listed in either BCS (biopharmaceutical classification system) class II/ IV or both are eliminated from the development pipeline due to their limited clinical use. A nanotechnological approach bears much hope and lipoidal fabrication is found to be suitable for the delivery of such drugs. Nanoemulsion based gel i.e. nanoemulgel out of different nanolipoidal formulations has been found to be a suitable approach to successful drug delivery through topical routes. In past few years many herbal and synthetic active pharmaceutical ingredients (APIs) has been patented as nano sized emulsified gel for various therapeutic activities.

METHODS

Nanoemulgel is basically an emulsion-based topical gel formulation, where nanosized emulsion globules can be prepared with the help of high energy or low energy methods and further converted into nanoemulgel by adding a suitable gelling agent. Nanoemulgel fabrication enlists various kinds of polymeric materials, surfactants and fatty substances of natural, synthetic and semi-synthetic nature with a globule size range from 5 to 500 nm.

RESULTS

Nanoemulgel can be applicable to various acute and chronic diseases through topical routes.

CONCLUSION

Nanoemulgel preparations of many recently approved drugs are being used successfully in different areas of health care and have re-defined the significance of topical route of delivery as compared to other routes. However, along with various improvements in the current state of the delivery system, the safety factor needs to be taken into account by toxicological studies of the materials used in such formulations.

Thermoresponsive systems composed of poloxamer 407 and HPMC or NaCMC: mechanical, rheological and sol-gel transition analysis

Poloxamer 407 (polox407) is widely studied as thermogelling polymer, transitioning to a gel state when warmed Polox407 forms weak hydrogels with rapid dissolution in excess solvent. This study reports the development of binary systems composed of polox407 and hydroxypropyl methylcellulose (HPMC) or sodium carboxymethylcellulose (NaCMC) aiming to improve the rheological and mechanical properties of the hydrogel. The interaction between polox407 and cellulose derivatives was studied, and their interaction with biological surfaces predicted. The carbohydrates affected the mechanical and rheological behavior of polox407 in different ways, dependent on polymer type, concentration, and temperature. T_sol/gel and rheological interaction parameters were useful to select the most suitable formulations for topical or local application. Most of the binary systems exhibited plastic behavior, thixotropy and viscoelastic properties. Appropriate formulations were identified for local application, such as 17.5/3; 17.5/4; 20/3 and 20/4 (%, w/w) for polox407/HPMC; and 17.5/1; 17.5/1.5; 20/1 and 20/1.5 (%, w/w) for polox407/NaCMC.

Investigating the potential of utilizing glycerosomes as a novel vesicular platform for enhancing intranasal delivery of lacidipine

Lacidipine is a potent dihydropyridine calcium channel blocker used for management of hypertension and atherosclerosis. The drug has low and fluctuating oral bioavailability owing to its extensive hepatic first-pass metabolism and reduced water solubility. Accordingly, this work aimed at overcoming the aforementioned challenges through the formulation of intranasal nano-sized lacidipine glycerosomes. Box-Behnken was successfully employed for the formulation and in vitro optimization of the glycerosomes. Statistical analysis revealed that cholesterol concentration exhibited a significant effect on the vesicle size, while Phospholipon® 90G and glycerol concentrations exhibited significant effects on both entrapment efficiency and deformability index. The optimized formulation showed spherical shape, good deformability, vesicular size of 220.25 nm, entrapment efficiency of 61.97%, and enhanced ex vivo permeation by 3.65 fold compared to lacidipine suspension. Confocal laser scattering microscope revealed higher penetration depth via nasal mucosa for rhodamine labelled glycerosomes (up to 60 µm) in comparison to rhoadamine dye solution (26 µm). In addition, the optimized lacidipine glycerosomes caused significant reduction in methylprednisolone acetate-induced hypertension in rats for up to 24 h in comparison to oral drug suspension. Histopathological assessment showed intact nasal mucosal epithelial lining with no signs of inflammation or necrosis confirming the safety and tolerability of the proposed glycerosomes. The declared results highlights the potential of utilizing the proposed glycerosomes as safe and effective platform for intranasal delivery of lacidipine.

In vivo biodistribution of venlafaxine-PLGA nanoparticles for brain delivery: plain vs. functionalized nanoparticles

Background: Actually, no drugs provide therapeutic benefit to approximately one-third of depressed patients. Depression is predicted to become the first global disease by 2030. So, new therapeutic interventions are imperative.Research design and methods: Venlafaxine-loaded poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) were surface functionalized with two ligands against transferrin receptor to enhance access to brain. An in vitro blood-brain barrier model using hCMEC/D3 cell line was developed to evaluate permeability. In vivo biodistribution studies were performed using C57/bl6 mice. Particles were administered intranasal and main organs were analyzed.Results: Particles were obtained as a lyophilized powder easily to re-suspend. Internalization and permeability studies showed the following cell association sequence: TfRp-NPs>Tf-NPs>plain NPs. Permeability studies also showed that encapsulated VLF was not affected by P-gP pump efflux increasing its concentration in the basolateral side after 24 h. In vivo studies showed that 25% of plain NPs reach the brain after 30 min of one intranasal administration while less than 5% of functionalized NPs get the target.Conclusions: Plain NPs showed the highest ability to reach the brain vs. functionalized NPs after 30 min by intranasal administration. We suggest plain NPs probably travel via direct nose-to-brian route whereas functionalized NPs reach the brain by receptor-mediated endocytosis.

Efavirenz-loaded intranasal microemulsion for crossing blood-CNS interfaces in neuronal-AIDS: pharmacokinetic and in vivo safety evaluation

Purpose: Development of delivery tool for the existing antiretroviral drugs against the neuronal-AIDS in itself is a big challenge because of blood-brain-barrier (BBB). Aim of present research is to formulate efavirenz (EFV) based mucoadhesive microemulsion (EMME) and investigates its efficiency through intranasal delivery.Methods: The EFV microemulsion (EME) was formulated by aqueous titration method. The formulation was screened for globule size, zeta potential and encapsulation efficiency. Bio-distribution of EFV was performed by gamma scintigraphy. Safety of optimized formulation was demonstrated using biochemical, hematological and histopathological data.Results: Experimental data demonstrate that optimized formulation showed significant size (19.04 nm), zeta potential (-32.2 mV) and entrapment efficiency (98.39%). The results of C_max value suggested that intranasal (i.n.) ^99mTc-EMME is able to improve the brain uptake of EFV around 2 folds more than i.n. ^99mTC-EME and intravenous (i.v.) ^99mTC-EME administrations. The drug targeting index (DTI= 10), drug targeting efficiency (DTE = 1000%) and direct transport percentage (DTP = 89%) were found highly significant for EMME (i.n.) than EME (i.n.). In vivo safety evaluation studies on experimental animals for biochemical, hematological and histopathological parameters remain unchanged.Conclusions: Hence, the intranasal delivery of EMME can be safe and effective tool in the treatment of neuronal-AIDS.

Acrylated Eudragit® E PO as a novel polymeric excipient with enhanced mucoadhesive properties for application in nasal drug delivery

Eudragit® E PO (EPO) is a terpolymer based on N,N-dimethylaminoethyl methacrylate with methylmethacrylate and butylmethacrylate, produced by Evonik Industries AG as a pharmaceutical excipient. In this work, EPO was chemically modified through reaction with acryloyl chloride. The successful modification of EPO was confirmed by FTIR, NMR-spectroscopy, elemental and thermal analysis. The degree of acrylation was determined by permanganatometric titration. The slug mucosal irritation test was used to demonstrate non-irritant nature of EPO and its acrylated derivatives (AEPO). The mucoadhesive properties of EPO and AEPO were evaluated using freshly excised sheep nasal mucosa and it was demonstrated that acrylated polymers facilitated greater retention of sodium fluorescein on mucosal surfaces compared to solution mixture of this dye solution with EPO as well as free dye.

How to characterize a nasal product. The state of the art of in vitro and ex vivo specific methods

Nasal delivery offers many benefits over other conventional routes of delivery (e.g. oral or intravenous administration). Benefits include, among others, a fast onset of action, non-invasiveness and direct access to the central nervous system. The nasal cavity is not only limited to local application (e.g. rhinosinusitis) but can also provide direct access to other sites in the body (e.g. the central nervous system or systemic circulation). However, both the anatomy and the physiology of the nose impose their own limitations, such as a small volume for delivery or rapid mucociliary clearance. To meet nasal-specific criteria, the formulator has to complete a plethora of tests, in vitro and ex vivo, to assess the efficacy and tolerance of a new drug-delivery system. Moreover, depending on the desired therapeutic effect, the delivery of the drug should target a specific pathway that could potentially be achieved through a modified release of this drug. Therefore, this review focuses on specific techniques that should be performed when a nasal formulation is developed. The review covers both the tests recommended by regulatory agencies (e.g. the Food and Drug Administration) and other complementary experiments frequently performed in the field.

Nanostructured lipid carriers engineered for intranasal delivery of teriflunomide in multiple sclerosis: optimization and in vivo studies

BACKGROUND

Multiple sclerosis (MS) is one of the most severe autoimmune disorder of the central nervous system (CNS).

OBJECTIVE

The present research work was aimed to formulate and investigate teriflunomide (TFM)-loaded intranasal (i.n.) nanostructured lipid carriers (NLC) for the treatment of multiple sclerosis (MS).

METHODS

The TFM-loaded NLC (TFM-NLC) nanoparticles were prepared by melt emulsification ultrasonication method using biodegradable and biocompatible polymers. The Box-Behnken statistical design was applied to optimize the formulation. The optimized NLC formulation was subjected to evaluate for particle size, entrapment efficiency (%), in vitro and ex vivo permeation. The safety and efficacy of optimized formulations were demonstrated using pharmacodynamic, subacute toxicity and hepatotoxicity data.

RESULTS

Experimental data demonstrated that optimized NLC formulation (F17) showed significant size (99.82 ± 1.36 nm), zeta potential (-22.29 ± 1.8 mV) and % entrapment efficiency (83.39 ± 1.24%). Alternatively, ex vivo permeation of TFM mucoadhesive NLC (TFM-MNLC) and TFM-NLC was observed 830 ± 7.6 and 651 ± 9.8 µg/cm², respectively. Whereas, TFM-MNLC shows around 2.0-folds more J_ss than the TFM-NLC. Finally, TFM-MNLC (i.n.) formulation produced the rapid remyelination in cuprizone-treated animals and decreases the number of entries in open compartment of EPM when compared with negative control and TFM-NLC (oral) animals. Simultaneously, the nanoformulation did not reflect any gross changes in hepatic biomarkers and subacute toxicity when compared with control.

CONCLUSIONS

Hence it can be inferred that the nose-to-brain delivery of TFM-MNLC can be considered as effective and safe delivery for brain disorders.

Ultrasound-Assisted Facile Synthesis of Nanostructured Hybrid Vesicle for the Nasal Delivery of Indomethacin: Response Surface Optimization, Microstructure, and Stability

This work is devoted to design a novel nanostructured hybrid vesicle (NHV) made of lecithin and an acrylate/C10-C30 alkyl acrylate for the nasal delivery of a model active indomethacin (IND), and further to probe its microstructure, intermolecular interactions, drug release behavior, ex vivo permeation, and stability. NHVs were prepared by cavitation technology employing RSM-based central composite design (CCD). Amount of lecithin (X₁), power of ultrasound (X₂), and sonication time (X₃) were selected as three independent variables while the studied response included Z-Avg (nm), polydispersity index (PDI), and zeta potential (mV). The designed system (NHV) was investigated through dynamic (DLS) and electrophoretic light scattering (ELS), attenuated total reflectance (ATR-FTIR), oscillatory measurement (stress and frequency sweep), and transmission electron microscopy (TEM). CCD was found useful in optimizing NHV. An optimized formulation (S6) had Z-Avg 80 nm, PDI 0.2, and zeta potential of - 43.26 mV. Morphology investigation revealed spherical vesicles with smaller TEM diameters (the largest particle being 52.26 nm). ATR analysis demonstrated significant intermolecular interactions among the drug (IND) and the components of vesicles. The designed vesicles had an elastic predominance and displayed supercase II (n > 1) type of drug release. Besides, the vesicles possessed potential to transport IND across the nasal mucosa with the steady-state flux (μg/cm²/h) and permeability coefficient (cm/h) of 26.61 and 13.30 × 10^-3, respectively. NHV exhibited an exceptional stability involving a combination of electrostatic and steric interactions while the histopathology investigation confirmed their safety for nasal administration.

Updates on thermosensitive hydrogel for nasal, ocular and cutaneous delivery

Thermosensitive hydrogels are in situ gelling systems composed of hydrophilic homopolymers or block copolymers which remain as solutions at room temperature and form gels after administration into the body. Its application in advanced drug delivery has gained significant attention in recent years. The tunable characteristics of thermosensitive hydrogels make them versatile and capable of incorporating both hydrophilic and lipophilic compounds and macromolecules. The drug molecules can be included as free molecules or preformulated into nano- or micro-particles or liposomes. Although there were several reviews on the materials of thermosensitive hydrogels, the compatibility between the drug and thermosensitive material as well as its in vitro release mechanisms and in vivo performance have barely been investigated. The current review is proposed aiming to not only provide an update on the recent development in thermosensitive hydrogel formulations for nasal, ocular and cutaneous deliveries, but also identify the relationship between the drug characteristics and the loading strategies, and their impacts on the release mechanisms and the in vivo performance. Our current update for the first time highlights the essential features for successful development of in situ thermosensitive hydrogels to facilitate nasal, ocular or cutaneous drug deliveries.

Agranulocytosis-Protective Olanzapine-Loaded Nanostructured Lipid Carriers Engineered for CNS Delivery: Optimization and Hematological Toxicity Studies

Potential risk of agranulocytosis is one of the drug-induced adverse effects of the second-generation antipsychotic agents. The present investigation aimed to formulate and investigate olanzapine (OLZ)-loaded nanostructured lipid carriers (OLZ-NLCs) via intranasal (i.n.) route. The NLC was prepared by melt emulsification method and optimized by Box-Behnken design. Mucoadhesive NLC was prepared by using 0.4% Carbopol 974P (OLZ-MNLC (C)) and the combination of 17% poloxamer 407 and 0.3% of HPMC K4M (OLZ-MNLC (P+H)). The particle size, zeta potential, and entrapment efficiency were found to be 88.95 nm ± 1.7 nm, - 22.62 mV ± 1.9 mV, and 88.94% ± 3.9%, respectively. Ex vivo permeation of OLZ-NLC, OLZ-MNLC (P+H), and OLZ-MNLC (C) was found to be 545.12 μg/cm² ± 12.8 μg/cm², 940.02 μg/cm² ± 15.5 μg/cm², and 820.10 μg/cm² ± 11.3 μg/cm², respectively, whereas the OLZ-MNLC (P+H) formulation showed rapid drug permeation than the OLZ-NLC and OLZ-MNLC (C) formulations. The OLZ-MNLC (P+H) formulation was shown to have 13.57- and 27.64-fold more J_ss than the OLZ-MNLC (C) and OLZ-NLC formulations. The OLZ nanoformulations showed sustained release of up to 8 h. Finally, the brain C_max of technetium-99m (^99mTc)-OLZ-MNLC (i.n.) and ^99mTc-OLZ-NLC (i.v.) was found to be 936 ng and 235 ng, respectively, whereas the C_max of i.n. administration was increased 3.98-fold more than the C_max of i.v. administration. The in vivo hematological study of OLZ-MNLC (P+H) confirmed that the i.n. formulation did not reflect any variation in leukocyte, RBC and platelet counts. Hence, it can be concluded that the nose-to-brain delivery of OLZ-MNLC (P+H) can be considered as an effective and safe delivery for CNS disorders.

Intranasal niosomes of nefopam with improved bioavailability: preparation, optimization, and in-vivo evaluation

OBJECTIVE

One of the greatest challenges drug formulation is facing is poor bioavailability via oral route. In this regard, nasal drug delivery has been commonly used as an alternative route to improve drug bioavailability. Nefopam hydrochloride (NF) is an analgesic drug that suffers from poor bioavailability due to extensive metabolism in liver. Accordingly, the goal of the present study was to improve NF bioavailability via niosomal-based formulation designed for intranasal delivery.

MATERIALS AND METHODS

Vesicles were developed by mixing surfactants (Span 20, Span 40, Span 80, and Span 85) at four molar ratios of 1:1, 1:2, 1:3, and 1:4 of cholesterol to surfactant. Entrapment efficiency, particle size, zeta potential, release percentage, ex-vivo permeation parameters, and niosomes' stability were determined. Also, the pharmacokinetic parameters of the optimized formula in in-situ gel base were measured in rats.

RESULTS

Niosomes showed entrapment efficiency .80%, particle size ,550 nm, and zeta potential ranging from -16.8±0.13 to -29.7±0.15. The produced vesicles showed significantly higher amounts of drug permeated across nasal mucosa (2.5 folds) and prolonged NF release compared with NF solution. Stability studies of optimum formula showed nonsignificant changes in niosomes parameters over a storage period of 6 months. The in-vivo studies showed a 4.77-fold increase in bioavailability of optimized nasal niosomes compared with oral solution of drug.

CONCLUSION

The obtained results revealed the great ability of the produced NF-loaded nio-somes to enhance drug penetration through nasal mucosa and improve its relative bioavailability compared with NF oral solution.

N,N,N‑trimethyl chitosan modified flaxseed oil based mucoadhesive neuronanoemulsions for direct nose to brain drug delivery

Here we fabricated flaxseed oil-based neuronanoemulsions (NNEs) which were further surface-modified with a mucoadhesive polymer, N,N,N‑trimethyl chitosan (TMC) to form mucoadhesive neuronanoemulsions (mNNEs). The NNEs were loaded with high partitioning ropinirole-dextran sulfate (ROPI-DS) nanoplex and fabricated using hot high-pressure homogenization (HPH) technique. NNEs were optimized using Central Composite experimental design. TMC modified mNNE have not been prepared yet for direct nose to brain drug delivery. Here, an objective to provide controlled drug release with prolonged residence on the nasal mucosa for the treatment of Parkinson's disease (PD) is at prime consideration. Enhanced brain targeting through BBB bypass drug delivery, improved therapeutic efficacy through enhanced retention of mNNE formulation over nasal mucosal membrane, reduced dose and frequency of administration, and safety were further expected outcomes of this experiment. The mNNE formulation was subjected to 6 month stability assessment. The mNNE formulation was administered to the Swiss albino mice model via intranasal route and both, the plasma and brain pharmacokinetics were estimated. The in vivo studies performed on mice exhibited high brain targeting efficiency of mNNE formulation through nose to brain delivery via olfactory pathway. The prepared intranasal mNNEs could be on the clinics, if investigated more for behavioral and neurotoxicity studies.

Development and Evaluation of pH-Responsive Cyclodextrin-Based in situ Gel of Paliperidone for Intranasal Delivery

Paliperidone (PLPD) is approved for treatment and management of schizophrenia. The current study demonstrates the potential of in situ gel of PLPD for nasal delivery. The permeation of drug through sheep nasal mucosa was analyzed since the nose-to-brain pathway has been indicated for delivering drugs to the brain. The carbopol 934 (CP)- and hydroxypropyl methyl cellulose K4M (HPMC)-based in situ gels containing 0.2% CP and 0.4% w/v HPMC were optimized using experimental design software. The use of hydroxypropyl-β-cyclodextrin (HP-β-CD) in nasal permeation of drug was investigated. Transmucosal permeation of PLPD was examined using sheep nasal mucosa. The in situ gels of PLPD exhibited satisfactory mucoadhesion and showed sustained drug release. The mucocilliary toxicity and histopathological examination confirmed that the nasal mucosa architecture remains unaffected after treatment with PLPD in situ gel. The formulation containing HP-β-CD complex of PLPD exhibited higher rate of drug permeation through sheep nasal mucosa revealing the role of HP-β-CD as nasal absorption enhancer. Thus, CP- and HPMC-based pH-triggered in situ gel containing HP-β-CD-drug inclusion complex demonstrates a novel nasal delivery of PLPD.

Formulation and ex vivo-in vivo evaluation of pH-triggered brimonidine tartrate in situ gel for the glaucoma treatment using application of 32 factorial design

CONTEXT

Short residence time, poor bioavailability and poor permeability are the major problems for conventional eye drops treatment.

OBJECTIVE

The aim of this article is to develop, optimize and ex vivo-in vivo investigation of brimonidine tartrate in situ gel as compared to marketed eye drops for the treatment of glaucoma.

MATERIALS AND METHODS

The effect of independent variables, namely concentrations of polymers, on various dependent variables like viscosity at physiological pH and in vitro drug release were studied by using 3² factorial design. Further the optimized formulation was characterized for ex vivo and in vivo study.

RESULTS AND DISCUSSION

Experimental data demonstrated that optimized in situ gel formulation (F8) showed in vitro-ex vivo sustained release profile with polymer composites carbopol 974P and HPMC K4M. After 5 h of ex vivo transcorneal permeation study, the amount recovered from the corneal surface on the donor chamber 12.40% (124 ug) and the amount collected from the receptor chamber 76.8% (760 ug) of the initial dose 1 mg. The total amount recovered from the permeation experiment was 89.2%. Bioadhesive carbopol 974P and viscosity HPMC K4M composites optimized formulation (F 8) produce greater influence on the duration of drug action and improved intraocular pressure reduction activity as compared to marketed eye drop solution in in vivo study.

CONCLUSION

The developed in situ gelling system as a promising ophthalmic formulation to prolong the drug lowering effect on the intraocular pressure.