Electrochemical myoglobin biosensor based on graphene–ionic liquid–chitosan bionanocomposites: Direct electrochemistry and electrocatalysis

Ionogels for flexible conductive substrates and their application in biosensing

Ionogels are highly conductive gels made from ionic liquids dispersed in a matrix made of organic or inorganic materials. Ionogels are known for high ionic conductivity, flexibility, high thermal and electrochemical stability. These characteristics make them suitable for sensing and biosensing applications. This review discusses about the two main constituents, ionic liquids and matrix, used to make ionogels and effect of these materials on the characteristics of ionogels. Here, the material properties like mechanical, electrochemical and stability are discussed for both polymer matrix and ionic liquid. We have briefly described about the fabrication methods like 3D printing, sol-gel, blade coating, spin coating, aerosol jet printing etc., used to make films or coating of these ionogels. The advantages and disadvantages of each method are also briefly summarized. Finally, the last section provides a few examples of application of flexible ionogels in areas like wearables, human-machine interface, electronic skin and detection of biological molecules.

Ionic Liquid-Based Polymer Nanocomposites for Sensors, Energy, Biomedicine, and Environmental Applications: Roadmap to the Future

Current interest toward ionic liquids (ILs) stems from some of their novel characteristics, like low vapor pressure, thermal stability, and nonflammability, integrated through high ionic conductivity and broad range of electrochemical strength. Nowadays, ionic liquids represent a new category of chemical-based compounds for developing superior and multifunctional substances with potential in several fields. ILs can be used in solvents such as salt electrolyte and additional materials. By adding functional physiochemical characteristics, a variety of IL-based electrolytes can also be used for energy storage purposes. It is hoped that the present review will supply guidance for future research focused on IL-based polymer nanocomposites electrolytes for sensors, high performance, biomedicine, and environmental applications. Additionally, a comprehensive overview about the polymer-based composites' ILs components, including a classification of the types of polymer matrix available is provided in this review. More focus is placed upon ILs-based polymeric nanocomposites used in multiple applications such as electrochemical biosensors, energy-related materials, biomedicine, actuators, environmental, and the aviation and aerospace industries. At last, existing challenges and prospects in this field are discussed and concluding remarks are provided.

Laccase bioconjugate and multi-walled carbon nanotubes-based biosensor for bisphenol A analysis

Bisphenol A (BPA) is an endocrine disruptor compound that has been detected in aquatic ecosystems. In this work, the development of an electrochemical biosensor for BPA determination based on laccase from Trametes versicolor is reported. A bioconjugate was optimized to maximize the biosensor electrocatalytic activity and stability, which for the first time involved the synergistic effect of this specific enzyme (6.8 UmL-1), chitosan (5 mgmL-1) and the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate in an optimum 5:5:2 (v/v/v) proportion. This bioconjugate was deposited onto a screen-printed carbon electrode previously modified with multi-walled carbon nanotubes (MWCNTs). Nanostructuration with MWCNTs enlarged the electrocatalytic activity and surface area, thus improving the biosensor performance. The BPA electrochemical reaction follows an EC mechanism at the optimum pH value of 5.0. Linearity up to 12 µM, a sensitivity of (6.59 ± 0.04) × 10-2 μAμM-1 and a detection limit of 8.4 ± 0.3 nM were obtained coupled with high reproducibility (relative standard deviations lower than 6%) and stability (87% of the initial response after one month). The developed biosensor was employed to the analysis of BPA in river water displaying appropriate accuracy (94.6-97.9%) and repeatability (3.1 to 6% relative standard deviations) proving its high potential applicability for in situ environmental analysis.

When graphene meets ionic liquids: a good match for the design of functional materials

Graphene is an attractive material that is characterized by its exceptional properties (i.e. electrical, mechanical, thermal, optical, etc.), which have pushed researchers to attach high interest to its production and functionalization processes to meet applications in different fields (electronics, electromagnetics, composites, sensors, energy storage, etc.). The synthesis (bottom-up) of graphene remains long and laborious, at the same time expensive, and it is limited to the development of this material in low yield. Hence, the use of graphite as a starting material (top-down through exfoliation or oxidation) seems a promising and easy technique for producing a large quantity of graphene or graphene oxide (GO). On the one hand, GO has been extensively studied due to its ease of synthesis, processing and chemical post-functionalization. One the other hand, "pristine" graphene sheets, obtained through exfoliation, are limited in processability but present enhanced electronic properties. Both types of materials have been of great interest to design functional nanomaterials. Ionic liquids (ILs) are task-specific solvents that exhibit tunable physico-chemical properties. ILs have many advantages as compared with conventional solvents, such as high thermal and chemical stability, low volatility, excellent conductivity and inherent polarity. In the last decade, ILs have been widely employed for the preparation and stabilization of various nanomaterials. In particular, the combination of ILs and graphene, including GO and pristine graphene sheets, has been of growing interest for the preparation, processing and functionalization of hybrid nanomaterials. Understanding the structure and properties of the graphene/IL interface has been of considerable interest for a large panel of applications ranging from tribology to energy storage.

Myoglobin- and Hydroxyapatite-Doped Carbon Nanofiber-Modified Electrodes for Electrochemistry and Electrocatalysis

In this paper, a hydroxyapatite (HAp)-doped carbon nanofiber (CNF)-modified carbon ionic liquid electrode (CILE) was prepared and used for the investigation on the direct electrochemistry and electrocatalysis of myoglobin (Mb). HAp nanoparticles were mixed within a polyacrylonitrile (PAN) solution, and a HAp@PAN nanofiber was synthesized by electrospinning process, which was further controlled by carbonization at 800 °C for 2 h in a nitrogen atmosphere to get a HAp@CNF nanocomposite. Various techniques were used to check the physicochemical properties of HAp@CNF. Mb was mixed with a HAp@CNF dispersion solution and casted on the surface of CILE to obtain an electrochemical sensing platform. The direct electrochemistry of Mb on the modified electrode was checked when a pair of enhanced redox waves appeared, indicating the direct electron transfer of Mb. HAp@CNF exhibited high conductivity, good biocompatibility, and large surface area, which was beneficial for Mb immobilization. The modified electrode showed excellent electrocatalytic activity toward the reduction of trichloroacetic acid and sodium nitrite, which was further used to establish a new electroanalytical method. Real samples were analyzed by the proposed method with satisfactory results.

Recent Advances on Electrochemical Sensors for the Detection of Organic Disinfection Byproducts in Water

Irreversible organ damage or even death frequently occurs when humans or animals unknowingly drink contaminated water. Therefore, in many countries drinking water is disinfected to ensure removal of harmful pathogens from drinking water. If upstream water treatment prior to disinfection is not adequate, disinfection byproducts (DBPs) can be formed. DBPs can exist as wide variety of compounds, but up until now, only several typical compounds have drinking water standards attributed to them. However, it is apparent that the range of DBPs present in water can comprise hundreds of compounds, some of which are at high enough concentrations to be toxic or potentially carcinogenic. Hence, it becomes increasingly significant and urgent to develop an accessible, affordable, and durable sensing platform for a broader range and more sensitive detection of DBPs. Compared with well-established laboratory detection techniques, electrochemical sensing has been identified as a promising alternative that will provide rapid, affordable, and sensitive DBP monitoring in remote water sources. Therefore, this Review covers current state-of-the-art development (within the past decade) in electrochemical sensing to detect organic DBPs in water, which covered three major aspects: (1) recognition mechanism, (2) electrodes with signal amplification, and (3) signal read-out techniques. Moreover, comprehensive quality assessments on electrochemical biosensors, including linear detection range, limit of detection (LoD) and recovery, have also been summarized.

Voltammetric sensing performances of a carbon ionic liquid electrode modified with black phosphorene and hemin

A black phosphorene (BPE) and poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) hybrid was used for the immobilization of hemin on a carbon ionic liquid electrode (CILE). BPE inside the PEDOT:PSS film was stable without adverse effects of water and oxygen. The hemin-modified electrode facilitates electrochemical communication with a couple of well-shaped and enhanced redox waves. Therefore BPE exhibits an accelerating function to the electron movement. This sensor exhibits excellent electrocatalytic effects on the reduction of various substrates including trichloroacetic acid (TCA), nitrite and H₂O₂. As for TCA, the reduction current at -0.36 V (vs. Ag/AgCl) increases linearly in the concentration range from 2.0 to 180 mmol·L^-1 with a detection limit of 0.67 mmol·L^-1 (at 3σ). As for nitrite, the reduction current at -0.59 Vis linear in the 1.0 to 10.5 mmol·L^-1 concentration range, and the detection limit is 0.33 mmol·L^-1 (at 3σ). As for H₂O₂, the reduction current at -0.033 V (vs. Ag/AgCl) is linear in the concentration range from 4.0 to 35.0 mmol·L^-1 and the detection limit is 1.3 mmol·L^-1 (at 3σ). The real sample was analyzed with satisfactory results, which indicated that BPE had potential applications in the field of electrochemical biosensor. Graphical abstract Photos of (a) black phosphorene (BPE) solution, (b) poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS), (c) BPE-PEDOT:PSS (1:5) dispersion, and the fabrication procedure of this electrochemical sensor. It was applied to the determination of trichloroacetic acid, nitrite and hydrogen peroxide.

Electrochemical performance of myoglobin based on TiO2-doped carbon nanofiber decorated electrode and its applications in biosensing

A new biosensing strategy based on a TiO2-doped carbon nanofiber (CNF) composite modified electrode was developed. TiO2@CNF was prepared by electrospinning with further carbonization, before being characterized by various methods and used for electrode modification on the surface of carbon ionic liquid electrode (CILE). Myoglobin (Mb) was further immobilized on the modified electrode surface. The results of ultraviolet-visible (UV-vis) and Fourier transform infrared (FT-IR) spectroscopy showed that Mb maintained its native structure without denaturation in the composite film. Direct electron transfer and the electrocatalytic properties of Mb on the electrode surface were further investigated. A pair of quasi-reversible redox peaks appeared on the cyclic voltammogram, indicating that direct electrochemistry of Mb was realized in the nanocomposite film. This could be attributed to the specific properties of TiO2@CNF nanocomposite, including a large surface-to-volume ratio, good biocompatibility and high conductivity. Nafion/Mb/TiO2@CNF/CILE exhibited an excellent electrochemical catalytic ability in the reduction of trichloroacetic acid, NaNO2 and H2O2. All results demonstrated potential applications of TiO2@CNF in third-generation electrochemical biosensors.

A graphene modified carbon ionic liquid electrode for voltammetric analysis of the sequence of the Staphylococcus aureus nuc gene

The authors describe a voltammetric method for the detection of the nuc ssDNA sequence originating from Staphylococcus aureus by using a carbon ionic liquid electrode modified with electrodeposited three-dimensional graphene (3DGR). Probe ssDNA was electrostatically adsorbed on the modified electrode by a potentiostatic method. The porous structure and large surface area of 3DGR greatly increase the amount of immobilized probe ssDNA on the interface, which is beneficial for the reaction with target ssDNA. By using Methylene Blue (MB) as the electrochemical probe, the reduction peak current of MB (best measured at -0.30 V vs. SCE) can be used for detecting hybridization. The differential pulse voltammetric current of MB increases linearly in the 1.0 × 10^-12 mol L^-1 to 1.0 × 10^-6 mol L^-1 nuc concentration range, and the detection limit is 3.3 × 10^-13 mol L^-1 (at 3σ). The DNA sensor was successfully applied to the determination of the PCR product of the gene in pork. Graphical abstract Response of an electrochemical DNA biosensor based on the use of a carbon ionic liquid electrode modified with three-dimensional graphene. It enables sensitive voltammetric detection of the specific sequence of the Staphylococcus aureus nuc gene.

Application of three-dimensional reduced graphene oxide-gold composite modified electrode for direct electrochemistry and electrocatalysis of myoglobin

In this paper a three-dimensional (3D) reduced graphene oxide (RGO) and gold (Au) composite was synthesized by electrodeposition and used for the electrode modification with carbon ionic liquid electrode (CILE) as the substrate electrode. Myoglobin (Mb) was further immobilized on the surface of 3D RGO-Au/CILE to obtain an electrochemical sensing platform. Direct electrochemistry of Mb on the modified electrode was investigated with a pair of well-defined redox waves appeared on cyclic voltammogram, indicating the realization of direct electron transfer of Mb with the modified electrode. The results can be ascribed to the presence of highly conductive 3D RGO-Au composite on the electrode surface that accelerate the electron transfer rate between the electroactive center of Mb and the electrode. The Mb modified electrode showed excellent electrocatalytic activity to the reduction of trichloroacetic acid in the concentration range from 0.2 to 36.0 mmol/L with the detection limit of 0.06 mmol/L (3σ).

Magnetic Fe3O4 carbon aerogel and ionic liquid composite films as an electrochemical interface for accelerated electrochemistry of glucose oxidase and myoglobin

Synthesized magnetic ferroferric oxide carbon aerogel (Fe₃O₄-CA) was characterized by scanning electron microscope (SEM), atomic force microscopy (AFM) and N₂ adsorption–desorption isotherm measurements.

An ionic liquid-modified graphene based molecular imprinting electrochemical sensor for sensitive detection of bovine hemoglobin

A novel kind of molecular imprinted polymers based on ionic liquid-functionalized graphene (MIPs/IL/GR) was prepared by electro-polymerization, which was applied as a molecular recognition element to modify glassy carbon electrode (GCE) to construct an electrochemical sensor (MIPs/IL/GR/GCE) for sensitive detection of bovine hemoglobin (BHb). The fabrication conditions that affect the performance of the imprinted sensor, such as pyrrole concentration, scan cycles and scan rates, have been discussed. Under the optimized conditions, the prepared molecular imprinting electrochemical sensor showed a fast rebinding dynamics, which was successfully applied to BHb detection with a wide linear range from 1.0 × 10(-10) to 1.0 × 10(-3)g/L (R=0.998) and a detection limit of 3.09 × 10(-11)g/L. Moreover, the fabricated sensor possessed a good selectivity and stability, providing a promising tool for immunoassays and clinical applications.

Electrochemical biosensors on platforms of graphene

In recent years, graphene, the two-dimensional closely packed honeycomb carbon lattice, has been attracting much attention in the field of electrochemistry due to its intrinsic properties and merits. Efforts to create novel graphene based electrochemical biosensors have led to the establishment of effective strategies for diverse bioassays, from simple molecules to complex biotargets. In this Feature Article, we provide an overview of electrochemical biosensing with graphene related materials, and discuss the role of graphene in different sensing protocols.

Prospects and challenges of graphene in biomedical applications

Graphene materials have entered a phase of maturity in their development that is characterized by their explorative utilization in various types of applications and fields from electronics to biomedicine. Herein, we describe the recent advances made with graphene-related materials in the biomedical field and the challenges facing these exciting new tools both in terms of biological activity and toxicological profiling in vitro and in vivo. Graphene materials today have mainly been explored as components of biosensors and for construction of matrices in tissue engineering. Their antimicrobial activity and their capacity to act as drug delivery platforms have also been reported, however, not as coherently. This report will attempt to offer some perspective as to which areas of biomedical applications can expect graphene-related materials to constitute a tool offering improved functionality and previously unavailable options.