Catalytic fuel cell used as an analytical tool for methanol and ethanol determination. Application to ethanol determination in alcoholic beverages

Improvement of Qualitative Analyses of Aliphatic Alcohols Using Direct Catalytic Fuel Cell and Chemometric Analysis Format

Direct catalytic methanol fuel cells (DCMFCs) have been studied for several years for energy conversion. Less extensive is the investigation of their analytical properties. In this paper, we demonstrate that the behavior of both the discharge and charger curves of DCMFCs depends on the chemical composition of the solution injected in the fuel cell. Their discharge and charge curves, analyzed using a chemometric data fusion method named ComDim, enable the identification of various types of aliphatic alcohols diluted in water. The results also show that the identification of alcohols can be obtained from the first portion of the discharge and charge curves. To this end, the curves have been described by a set of features related to the slope and intercept of the initial portion of the curves. The ComDim analysis of this set of features shows that the identification of alcohols can be obtained in a time that is about thirty times shorter than the time taken to achieve steady-state voltage.

A Direct Catalytic Ethanol Fuel Cell (DCEFC) Modified by LDHs, or by Catalase-LDHs, and Improvement in Its Kinetic Performance: Applications for Human Saliva and Disinfectant Products for COVID-19

In this work, it has been experimentally proven that the kinetic performance of a common Direct Catalytic Ethanol Fuel Cell (DCEFC) can be increased by introducing nanostructured (Zn^II,Al^III(OH)₂)⁺NO₃^-·H₂O Layered Double Hydroxides (LDHs) into the anode compartment. Carrying out the measurements with the open-circuit voltage method and using a kinetic format, it has been shown that the introduction of LDHs in the anodic compartment implies a 1.3-fold increase in the calibration sensitivity of the method. This improvement becomes even greater in the presence of hydrogen peroxide in a solution. Furthermore, we show that the calibration sensitivity increased by 8-times, when the fuel cell is modified by the enzyme catalase, crosslinked on LDHs and in the presence of hydrogen peroxide. The fuel cell, thus modified (with or without enzyme), has been used for analytical applications on real samples, such as biological (human saliva) and hand disinfectant samples, commonly used for the prevention of COVID-19, obtaining very positive results from both analytical and kinetic points of view on ethanol detection. Moreover, if the increase in the calibration sensitivity is of great importance from the point of view of analytical applications, it must be remarked that the increase in the speed of the ethanol oxidation process in the fuel cell can also be extremely useful for the purposes of improving the energy performance of a DCEFC.

Current State of Sensors and Sensing Systems Utilized in Beer Analysis

Beer is one of the most consumed beverages in the world. Advances in instrumental techniques have allowed the analysis and characterization of a large number of beers. However, review studies that outline the methodologies used in beer characterization are scarce. Herein, a systematic review investigating the molecular targets and sensometric techniques in beer characterization was performed following the PRISMA protocol. The study reviewed 270 articles related to beer analysis in order to provide a comprehensive summary of the recent advances in beer analysis, including methods using sensors and sensing systems. The results revealed the use of various techniques that include several technologies, such as nanotechnology and electronics, often combined with scientific data analysis tools. To our knowledge, this study is the first of its kind and provides the reader with a faithful overview of what has been done in the sensor field regarding beer characterization.

Simple Yeast-Direct Catalytic Fuel Cell Bio-Device: Analytical Results and Energetic Properties

This paper reports the analytical detection and energetic properties of a glucose-fed Direct Catalytic Fuel Cell (DCFC) operated in association with yeast cells (Saccharomyces Cerevisiae). The cell was tested in a potentiostatic mode, and the operating conditions were optimized to maximize the current produced by a given concentration of glucose. Results indicate that the DCFC is characterized by a glucose detection limit of the order to 21 mmol L⁻¹. The cell was used to estimate the “pool” of carbohydrate content in commercial soft drinks. Furthermore, the use of different carbohydrates, such as fructose and sucrose, has been shown to result in a good current yield.

Direct Catalytic Fuel Cell Device Coupled to Chemometric Methods to Detect Organic Compounds of Pharmaceutical and Biomedical Interest

Making use of a small direct methanol fuel cell device (DMFC), used as an analytical sensor, chemometric methods, organic compounds very different from one another, can be determined qualitatively and quantitatively. In this research, the following seven different organic compounds of pharmaceutical and biomedical interest, having in common only one –OH group, were considered: chloramphenicol, imipenem, methanol, ethanol, propanol, atropine and cortisone. From a quantitative point of view, the traditional approach, involving the building of individual calibration curves, which allow the quantitative determination of the corresponding organic compounds, even if with different sensitivities, was followed. For the qualitative analysis of each compound, this approach has been much more innovative. In fact, by processing the data from each of the individual response curves, obtained through the fuel cell, using chemometric methods, it is possible to directly identify and recognize each of the seven organic compounds. Since the study is a proof of concept to show the potential of this innovative methodological approach, based on the combination of direct methanol fuel cell with advanced chemometric tools, at this stage, concentration ranges that may not be the ones found in some real situations were investigated. The three methods adopted are all explorative methods with very limited computation costs, which have different characteristics and, therefore, may provide complementary information on the analyzed data. Indeed, while PCA (principal components analysis) provides the most parsimonious summary of the variability observed in the current response matrix, the analysis of the current response behavior was performed by the “slicing” method, in order to transform the current response profiles into numerical matrices, while PARAFAC (Parallel Factor Analysis) allows to obtain a finer deconvolution of the exponential curves. On the other hand, the multiblock nature of “ComDim” (Common Components and Specific Weight Analysis) has been the basis to relate the variability observed in the current response behavior with the parameters of the linear calibrations.

A Suitable Immunosensor for Chloramphenicol Determination: Study of Two Different Competitive Formats

Background:

deep analytical study was performed on two different formats based on a “competitive” ELISA-type assay to develop a suitable, sensitive and cheap immune device for chloramphenicol determination that could be advantageously applied to the analysis of real matrices (pharmaceutical, food and environmental).

Methods:

To this purpose peroxidase enzyme as a marker and an amperometric electrode for hydrogen peroxide, as a transducer, were used. Through the first competitive format, chloramphenicol determination was based on the competition between chloramphenicol and conjugated with biotin-avidinperoxidase chloramphenicol, both free in solution, for anti-chloramphenicol immobilized in the membrane, while the second competitive format was based on the competition between free in solution chloramphenicol and immobilized in membrane one, for anti-chloramphenicol biotin-avidin-peroxidase conjugated free in solution.

Results:

The immunosensor was optimized by comparing the two used different “competitive” working formats on the basis of respective Kaff values, that were found to be about 105 and 104 (mol L-1)-1. The developed immune device displayed good selectivity for Chloramphenicol and LOD (limit of detection) was of the order of 10-9 mol L-1. The immunosensor was also used to test the presence of Chloramphenicol in real matrices such as cow milk, river wastewater and pharmaceutical formulations; recovery tests, using the standard addition method, gave satisfactory results.

Conclusion:

The results proved the validity of this immune device based on the competition between chloramphenicol and conjugated chloramphenicol obtained using biotin-avidin-peroxidase format, by which it is possible to carry out the analysis of chloramphenicol in milk and in river waste-waters with a % RSD ≤ 5 and with recovery values between 96% and 103%.

Direct Methanol Catalytic Fuel Cell, for Measuring Ethanol Contents in Pharmaceutical Tinctures

Background:

In order to test real direct applicability for analytical purposes, a small and simple direct methanol (or ethanol) catalytic, enzymatic or non-enzymatic fuel cell (DMFC) was used for the analysis of ethanol-based pharmaceutical tinctures; a detailed experimental study was conducted on five different pharmaceutical tinctures available at drugstores.

Results:

The results obtained using both enzymatic and non-enzymatic devices were compared with those obtained by analyzing the same pharmaceutical samples with a conventional catalase biosensor. Finally, the results were compared with the nominal values provided by manufacturing firms.

Conclusion:

The correlations between the different experimental and nominal values considered were good in general or satisfactory and the applied statistical tests (f-test and t-test) were also very comforting. At the end of the study, the use of enzymatic DMFC proved to be better than non- enzymatic DMFC devices, because it requires shorter analysis times.

Direct Methanol (or Ethanol) Fuel Cell as Enzymatic or Non-Enzymatic Device, Used to Check Ethanol in Several Pharmaceutical and Forensic Samples

It was already demonstrated by our research group that a direct catalytic methanol (or ethanol) fuel cell (DMFC) device can be used also for analytical purposes, such as the determination of ethanol content in beverages. In the present research we extended the application to the analysis of several ethanol-based pharmaceutical products, i.e., pharmaceutical tinctures (dyes) and disinfectants. In recent work we have also shown that the use of alcohol dehydrogenase enzyme as a component of the anodic section of a direct catalytic methanol (or ethanol) fuel cell significantly improves the performance of a simple DMFC device, making it more suitable to measure ethanol (or methanol) in real samples by this cell. At the same time, we have also shown that DMFC can respond to certain organic compounds that are more complex than methanol and ethanol and having R(R')CH-OH group in the molecule. Firstly, pharmaceutical dyes were analyzed for their ethanol content using the simple catalytic DMFC device, with good accuracy and precision. The results are illustrated in the present paper. Additionally, a detailed investigation carried out on commercial denatured alcoholic samples evidenced several interferences due to the contained additives. Secondly, we hypothesized that by using the enzymatic fuel cell it would be possible to improve the determination, for instance, of certain antibiotics, such as imipenem, or else carry out determinations of ethanol content in saliva and serum (simulating forensic tests, correlated to drivers "breath test"); even if this has already been hypothesized in previous papers, the present study is the first to perform them experimentally, obtaining satisfactory results. In practice, all of the goals which we proposed were reached, confirming the remarkable opportunities of the enzymatic (or non-enzymatic) DMFC device.

Ethanol traces in natural waters checked using a new DMFC enzymatic device

The use of fuels with strong percentage of ethanol that is done in countries such as Brazil and Australia causes a more and more relevant presence of traces of ethanol in natural waters. The ethanol present in these fuels seems to contribute to increase, through various mechanisms, the concentration of hydrocarbons in the same waters and soil. The ethanol content in natural waters must therefore be monitored frequently. It was therefore proposed a very simple innovative method, based on a catalytic fuel cell with the alcohol dehydrogenase enzyme immobilized in the anodic compartment of the device. The analytical performances of this new device were then evaluated by checking traces of alcohol in different types of natural waters (rain, river, and groundwater), with a good degree of precision and with an acceptable level of accuracy.