Highly exfoliated GO-PPy-Ag ternary nanocomposite for electrochemical supercapacitor

Highly Electroactive Frozen-State Polymerized Polypyrrole Nanostructures for Flexible Supercapacitors

The polymerization of pyrrole in the frozen state with the presence of organic dyes (methyl orange (MO) and Acid Blue 25 (AB)) has proven to produce polypyrrole (PPy) nanostructures. Herein, we explore the electrochemical properties of PPy prepared under frozen-state conditions (-24 °C) with and without the presence of organic dyes. The electroactivity of PPy prepared with MO and AB significantly increased in all electrolytic media with a capacitance higher than this of the PPy prepared at room temperature. The highest capacitance (1914 F g-1) was obtained for PPy-MO in 0.2 M HCl solution. The impedance spectra of PPy showed a decrease in charge transfer resistance when the dyes were present. This indicates a conductivity increase of PPy. Improved electrochemical stability was observed for PPy, PPy-MO, and PPy-AB prepared at -24 °C, wherein a steady gain of capacitance was maintained during 5000 potential cycling. In addition, a PPy-based supercapacitor device was fabricated to demonstrate the energy storage characteristics of PPy, where it showed good capacitive behavior and stability. Overall, frozen-state polymerized PPy posed an impressive capacitive performance for flexible supercapacitors.

Precisely manipulated π-π stacking of catalytic exfoliated iron polyphthalocyanine/reduced graphene oxide hybrid via pyrolysis-free path

Metal macrocycles with well-defined molecular structures are ideal platforms for the in-depth study of electrochemical oxygen reduction reaction (ORR). Structural integrity of metal macrocycles is vital but remain challenging since the commonly used high-temperature pyrolysis would cause severe structure damage and unidentifiable active sites. Herein, we propose a pyrolysis-free strategy to precisely manipulate the exfoliated 2D iron polyphthalocyanine (FePPc) anchored on reduced graphene oxide (rGO) via π-π stacking using facile high-energy ball milling. A delocalized electron shift caused by π-π interaction is firstly found to be the mechanism of facilitating the remarkable ORR activity of this hybrid catalyst. The optimal FePPc@rGO-HE achieves superior half-wave potential (0.90 V) than 20 % Pt/C. This study offers a new insight in designing stable and high-performance metal macrocycle catalysts with well-defined active sites.

Cold Atmospheric Plasma-Assisted Direct Deposition of Polypyrrole-Ag Nanocomposites for Flexible Electronic Sensors

Conductive polymers and their composite materials have attracted considerable interest due to their potential applications in sensors, actuators, drug delivery systems, and energy storage devices. Despite their wide range of applications, many challenges remain primarily with respect to the complex synthesis and time-consuming manufacturing steps that are often required in the fabrication process of various devices with conductive polymers. Here, we demonstrate the novel use of cold atmospheric plasma (CAP)-assisted deposition technologies as a solvent-free and scalable approach for in situ polymerization and direct deposition of conductive polypyrrole-silver (PPy-Ag) nanocomposites onto the desired substrates under atmospheric conditions. In this study, a systematic approach with different precursor composition mixtures containing pyrrole as the monomer and AgNO₃ as the photoinitiator was investigated to assess the effect of precursor composition on the final chemical, electrical, and mechanical properties of the PPy-Ag nanocomposite thin-film coatings which were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and cyclic bending tests. The characterizations indicated the possibility of fabricating PPy-Ag nanocomposite films with tunable degrees of polymerization and Ag nanoparticle loading by simply varying the percentage of AgNO₃ in precursor composition mixtures. Finally, as a proof of concept, the potential use of the PPy-Ag nanocomposite films with different Ag nanoparticle loading percentages was assessed for humidity sensing by measuring their level of change in electrical resistance in the relative humidity range of 12-60%. It is envisioned that the developed CAP-assisted deposition technology can provide a new stepping stone toward scalable additive manufacturing of various functional nanocomposite films for different low-cost and flexible electronic applications.

Nanostructured Conducting Polymers and Their Applications in Energy Storage Devices

Due to the energy requirements for various human activities, and the need for a substantial change in the energy matrix, it is important to research and design new materials that allow the availability of appropriate technologies. In this sense, together with proposals that advocate a reduction in the conversion, storage, and feeding of clean energies, such as fuel cells and electrochemical capacitors energy consumption, there is an approach that is based on the development of better applications for and batteries. An alternative to commonly used inorganic materials is conducting polymers (CP). Strategies based on the formation of composite materials and nanostructures allow outstanding performances in electrochemical energy storage devices such as those mentioned. Particularly, the nanostructuring of CP stands out because, in the last two decades, there has been an important evolution in the design of various types of nanostructures, with a strong focus on their synergistic combination with other types of materials. This bibliographic compilation reviews state of the art in this area, with a special focus on how nanostructured CP would contribute to the search for new materials for the development of energy storage devices, based mainly on the morphology they present and on their versatility to be combined with other materials, which allows notable improvements in aspects such as reduction in ionic diffusion trajectories and electronic transport, optimization of spaces for ion penetration, a greater number of electrochemically active sites and better stability in charge/discharge cycles.

A New CuSe-TiO2-GO Ternary Nanocomposite: Realizing a High Capacitance and Voltage for an Advanced Hybrid Supercapacitor

A high capacitance and widened voltage frames for an aqueous supercapacitor system are challenging to realize simultaneously in an aqueous medium. The severe water splitting seriously restricts the narrow voltage of the aqueous electrolyte beyond 2 V. To overcome this limitation, herein, we proposed the facile wet-chemical synthesis of a new CuSe-TiO₂-GO ternary nanocomposite for hybrid supercapacitors, thus boosting the specific energy up to some maximum extent. The capacitive charge storage mechanism of the CuSe-TiO₂-GO ternary nanocomposite electrode was tested in an aqueous solution with 3 M KOH as the electrolyte in a three-cell mode assembly. The voltammogram analysis manifests good reversibility and a remarkable capacitive response at various currents and sweep rates, with a durable rate capability. At the same time, the discharge/charge platforms realize the most significant capacitance and a capacity of 920 F/g (153 mAh/g), supported by the impedance analysis with minimal resistances, ensuring the supply of electrolyte ion diffusion to the active host electrode interface. The built 2 V CuSe-TiO₂-GO||AC-GO||KOH hybrid supercapacitor accomplished a significant capacitance of 175 F/g, high specific energy of 36 Wh/kg, superior specific power of 4781 W/kg, and extraordinary stability of 91.3% retention relative to the stable cycling performance. These merits pave a new way to build other ternary nanocomposites to achieve superior performance for energy storage devices.

Stable supercapacitor electrode based on two-dimensional high nucleus silver nano-clusters as a green energy source

Atomically precise silver nanoclusters (Ag-NCs) are known as a hot research area owing to their brilliant features and they have attracted an immense amount of research attention over the last year. There is a lack of sufficient understanding about the Ag-NC synthesis mechanisms that result in optimal silver nanoclusters with an appropriate size, shape, and morphology. In addition, the coexisting flexible coordination of silver ions, the argentophilic interactions, and coordination bonds result in a high level of sophistication in the self-assembly process. Furthermore, the expansion of clusters by the organic ligand to form a high dimensional structure could be very interesting and useful for novel applications in particular. In this study, a novel two-dimensional 14-nucleus silver poly-cluster was designed and synthesized by the combination of two synthetic methods. The high nucleus silver cluster units are connected together via tetradecafluoroazelaic acid (CF₂) and this leads to the high stability of the polymer. This highly stable conductive poly-cluster, with bridging groups of difluoromethylene, displays a high energy density (372 F g^-1 at 4.5 A g^-1), excellent cycling stability, and great capacity. This nanocluster shows a high power density and long cycle life over 6000 cycles (95%) and can also tolerate a wide range of scan rates (5 mV s^-1 to 1 V s^-1), meaning it could act as a green energy source.

Thermal effect on the pseudocapacitive behavior of high-performance flexible supercapacitors based on polypyrrole-decorated carbon cloth electrodes

The electrochemical performance of flexible CC/PPy supercapacitors was systematically investigated at various surrounding temperatures.

Ice-interface assisted large-scale preparation of polypyrrole/graphene oxide films for all-solid-state supercapacitors

In this paper, large-scale, self-standing polypyrrole/graphene oxide (PPy/GO) nanocomposite films were prepared by an environmentally friendly and easy-to-operate confined polymerization method, and were also assembled as electrode materials for symmetric all-solid-state supercapacitors. In this paper, large-scale, self-standing polypyrrole/graphene oxide (PPy/GO) nanocomposite films were prepared by an environmentally friendly and easy-to-operate confined polymerization method, and were also assembled as electrode materials for symmetric all-solid-state supercapacitors. The morphology, chemical structure and electrochemical property were characterized by field emission scanning electron microscope (FESEM), Fourier transform infrared spectroscopy (FTIR), cyclic voltammetry (CV), galvanostatic charge-discharge (GCD), and electrochemical impedance spectroscopy (EIS), respectively. The lamellar structure of GO and both strong interaction with ice and pyrrole could promote polymerization of pyrrole and improve the compactness of the film. With the aid of GO, the conjugation length of PPy increased, the resistance of the material decreased, and the electrochemical energy storage of the composite film was significantly enhanced. In the case of 2.5 wt% GO, the prepared PPy/GO nanocomposite supercapacitor exhibited a high area specific capacitance of 97.3 mF cm^-2 at 1 mA cm^-2. Furthermore, the PPy/GO film supercapacitor also showed excellent cycling stability and good flexibility.

Facile fabrication of a controlled polymer brush-type functional nanoprobe for highly sensitive determination of alpha fetoprotein

As robust functional polymers, polymer brush-based hybrid nanomaterials have potential application in the highly sensitive determination of tumor markers (TMs). Currently, there are plentiful reports on the polymerization methods of functional polymer brushes. Low ppm ATRP (activators (re)generated by electron transfer for atom transfer radical polymerization (A(R)GET ATRP), initiators for continuous activator regeneration atom transfer radical polymerization (ICAR ATRP) and electrochemically mediated atom transfer radical polymerization (eATRP)) is a facile and robust methodology with the advantages of simplicity, eco-friendliness and wide applicability to prepare well-defined polymeric materials. In this work, a controlled polymer brush-type functional nanoprobe is successfully fabricated by functional AGET ATRP and used as a sandwich-type electrochemical immunosensor for precise detection of TMs (alpha-fetoprotein, AFP). Using graphene oxide (GO) as an excellent conductive matrix, a GO-based poly-heterozygosis pyridine nanomaterial (GO@PHPY) is obtained by surface-initiated AGET ATRP and photocatalytic modification. The nanoprobe is assembled using GO@PHPY and a detection antibody (Ab2) to detect AFP, in which Cu(ii) serves as a signal label to coordinate with the pyridyl group. Under optimized conditions, the electrochemical sensor exhibits a good detection effect on AFP, with a detection range of 0.1 pg mL^-1 to 100 ng mL^-1 and a low detection limit of 0.08 pg mL^-1. It is worth noting that the detection platform can be applied to the detection of real human serum samples. Thus, it is a desirable platform for AFP detection in clinical diagnosis and practical applications. Meanwhile, this work proves that designing and constructing functional polymer brushes is one of the most effective methods for developing new materials for analytical scientific applications.

Removal of Cr(VI) from Aqueous Solution by Polypyrrole/Hollow Mesoporous Silica Particles

The removal of Cr(VI) in wastewater plays an important role in human health and environment. In this work, polypyrrole/hollow mesoporous silica particle (PPy/HMSNs) adsorbents have been newly synthesized by in-situ polymerization, which prevent the aggregation of pyrrole in the process of polymerization and exhibit highly selective and powerful adsorption ability for Cr(VI). The adsorption process was in good agreement with the quasi-second-order kinetic model and the Langmuir isotherm model. And the maximum adsorption capacity of Cr(VI) was 322 mg/g at 25 °C. Moreover, the removal rate of Cr(VI) by PPy/HMSNs was ~100% in a number of binary systems, such as Cl⁻/Cr(VI), NO₃⁻/Cr(VI), SO₄²⁻/Cr(VI), Zn²⁺/Cr(VI), Fe³⁺/Cr(VI), Sn⁴⁺/Cr(VI), and Cu²⁺/Cr(VI). Thus, the PPy/HMSNs adsorbents have great potential for the removal of Cr(VI) in wastewater.

Pulse electrochemical synthesis of polypyrrole/graphene oxide@graphene aerogel for high-performance supercapacitor

A novel electroactive polypyrrole/graphene oxide@graphene aerogel (PGO@GA) was synthesized for the first time by pulse electropolymerization. The off-time in this technique allows polypyrrole (PPy) to go through a more stable structural arrangement, meanwhile its electronic transmission performance is enhanced by immobilizing graphene oxide between PPy chains. Moreover, graphene aerogel provides a three-dimensional structure with high conductivity to protect PPy from swelling and shrinking during the capacitive testing. Under these synergistic effects, PGO@GA presents exceptional capacitive performances including high specific capacitance (625 F g⁻¹ at 1 A g⁻¹), excellent rate capability (keeping 478 F g⁻¹ at 15 A g⁻¹ with retention rate of 76.5%), and excellent cycling life (retaining 85.7% of its initial value when cycling 5000 times at 10 A g⁻¹). Therefore, the strategy adopted by this research provides a good reference for preparing other PPy-based electrode materials applied in the fields of catalysis, sensing, adsorption and energy storage.

The as-prepared polypyrrole/graphene oxide@graphene aerogel by pulse electropolymerization technique presents excellent capacitive performance.

Preparation of a novel sandwich-type electrochemical immunosensor for AFP detection based on an ATRP and click chemistry technique

It is extremely important to explore the synthesis methodology and application scope of functional polymer brush-based nanocomposites.

Polyoxometalates-Based Metal-Organic Frameworks Made by Electrodeposition and Carbonization Methods as Cathodes and Anodes for Asymmetric Supercapacitors

Hybrid materials have obtained well-deserved attention for energy storage devices, because they show high capacitances and high energy densities induced by the synergistic effect between complementary components. Polyoxometalate-based metal-organic frameworks (POMOFs) possess the abundant redox-active sites and ordered structures of polyoxometalates (POMs) and metal-organic frameworks (MOFs), respectively. Here, an asymmetric supercapacitor (ASC) NENU-5/PPy/60//FeMo/C was fabricated in which both its electrodes are prepared from POMOF precursors. A typical POMOF material, NENU-5, was first connected with polypyrrole (PPy) through electrodeposition to form the cathode material NENU-5/PPy. Another representative POMOFs material, PMo₁₂ @MIL-100, was carbonized to obtain the anode material FeMo/C. Cathode NENU-5/PPy exhibited an extraordinary capacitance of 508.62 F g^-1 (areal capacitance: 2034.51 mF cm^-2 ). In addition, anode FeMo/C shows excellent cyclic stability attributed to its unique structure. Finally, benefiting from the outstanding capacitances and structural merits of the anode and cathode, assembled asymmetric supercapacitor NENU-5/PPy/60//FeMo/C achieves an energy density of 1.12 mWh cm^-3 at a power density output of 27.78 mW cm^-3 , as well as a notable life of 10 000 cycles with an capacity retention of 80.62 %. Thus, the unique ASC is strongly competitive in high capacitance, long cycle life, and high energy-required energy storage devices.

Protection of Mild Steel by Waterborne Epoxy Coatings Incorporation of Polypyrrole Nanowires/Graphene Nanocomposites

Polypyrrole nanowires/graphene (PPyNG) nanocomposites as anticorrosive fillers were prepared by in situ polymerization in order to improve the anticorrosion performance of waterborne epoxy coatings. Field emission scanning electron microscope (FESEM) and Fourier transform infrared spectroscopy (FTIR) characterized the morphologies and structures of the synthesized PPyNG. The polypyrrole nanowires with about 50 nm in diameter were obtained. Conjugation length of PPy was increased with the addition of graphene. Open circuit potential (OCP) measurements, Tafel polarization curves, and electrochemical impedance spectroscopy (EIS) using an electrochemical workstation evaluated the anticorrosion properties of the waterborne epoxy/PPyNG coatings (EPPyNG). The studied nanocomposite coating possessed superior corrosion protection performance when the graphene content of the filler was 2 wt %. Its corrosion rate was about 100 times lower than that of neat epoxy coating. The higher barrier properties of nanocomposite coating and passivation effect of polypyrrole nanowires were beneficial in corrosion protection.

Novel electrochemical sensors from poly[N-(ferrocenyl formacyl) pyrrole]@multi-walled carbon nanotubes nanocomposites for simultaneous determination of ascorbic acid, dopamine and uric acid

Novel multi-walled carbon nanotubes coated with poly[N-(ferrocenyl formacyl) pyrrole] (MWCNTs@PFFP) nanocomposites were prepared through the in situ oxidation polymerization reaction of N-(ferrocenyl formacyl) pyrrole in the presence of MWCNTs. The MWCNTs@PFFP nanocomposites were characterized by FT-IR, Raman, TGA, XRD, XPS, SEM and TEM techniques. The MWCNTs@PFFP nanocomposites were fabricated into novel electrochemical sensors for simultaneous determination of ascorbic acid (AA), dopamine (DA) and uric acid (UA). The electrochemical behavior of the MWCNTs@PFFP/GCE sensors was examined, and the parameters that influence electrochemical signals were optimized. The experimental results showed that the fabricated modified electrode sensors exhibited good sensitivity, selectivity, specificity, repeatability and a long lifetime, remaining the initial current of at least 92.5% after 15 days storage in air. The sensors possessed a linear response concentration range over 200-400 μM for AA, 2-16 μM for both DA and UA, and a limit of detection as low as 40.0, 1.1 and 7.3 × 10-1 μM for AA, DA and UA, respectively. They are expected to be used as a potential tool for the simultaneous detection of DA, AA and UA in the human body.

Efficient optical limiting of polypyrrole ternary nanohybrids co-functionalized with peripherally substituted porphyrins and axially coordinated metal-porphyrins

Herein, three polypyrrole-based nanohybrids were designed and prepared via a nucleophilic substitution reaction, i.e., peripherally substituted porphyrin-functionalized PPy (TPP-PPy), axially coordinated metal-porphyrin-functionalized PPy (SnTPP-PPy), and polypyrrole ternary nanohybrids co-functionalized with peripherally substituted porphyrins and axially coordinated metal-porphyrins (TPP-PPy-SnTPP). The TPP-PPy, SnTPP-PPy and TPP-PPy-SnTPP nanohybrids exhibited improved nonlinear optical and optical limiting performances when compared to the individual PPy and porphyrins under 4 ns, 532 nm laser pulses. Their improved optical nonlinearities were ascribed to a combination of mechanisms and efficient charge transfer effect between the porphyrins and PPy. The charge transfer effect between the porphyrins and PPy was confirmed by UV-vis absorption, fluorescence and electrochemical impedance spectroscopy. The TPP-PPy-SnTPP ternary nanohybrid exhibited the best nonlinear absorption, nonlinear refraction and optical limiting performances because of more effective charge transfer effect, which provides a new avenue for the development of polypyrrole-porphyrin systems in the fields of nonlinear optics and optoelectronic devices.

Developing a novel sensor based on ionic liquid molecularly imprinted polymer/gold nanoparticles/graphene oxide for the selective determination of an anti-cancer drug imiquimod

Despite its useful properties, imiquimod (IMQ), known as an anti-cancer drug, can be harmful to the skin at high concentrations. Therefore, we have developed a novel electrochemical sensor to determine IMQ, for the first time. A glassy carbon electrode (GCE) was modified by a new composite comprising of ionic liquid-based molecularly imprinted polymer (MIP) and gold nanoparticles/graphene oxide (Au/GO). The MIP/Au/GO nanocomposite was synthesized through non-covalent imprinting process in the presence of IMQ, as template molecule and characterized by SEM and FT-IR. The square wave voltammetry technique (SWV) was applied for IMQ determination in 0.1 M phosphate buffer solution (PBS) at pH 7.0. Several parameters affecting the IMQ quantification were evaluated and optimized. Under the optimized conditions, the sensor presented a linear range of 0.02-20.0 μM, a limit of quantification and detection of 0.02 μM and 0.006 μM, respectively. Low RSD values indicate the good repeatability and reproducibility of the modified electrodes in preparation and determination procedures. The satisfactory results indicated that the proposed sensor could be successfully applied for IMQ determination in real samples.

Polypyrrole Nanowires with Ordered Large Mesopores: Synthesis, Characterization and Applications in Supercapacitor and Lithium/Sulfur Batteries

In this work, we report the preparation of polypyrrole nanowires with ordered large mesopores (OMPW) by a simple chemical polymerization method from dual templates synthesized by self-assembling silica nanospheres in porous anodic aluminum oxide (AAO) membrane channels. The obtained OMPW showed a large surface area (231.5 m² g⁻¹), high aspect ratio, and interconnected large mesopores (~23 nm). The OMPW was tested as a supercapacitor electrode and showed a specific capacitance of 453 F g⁻¹ at 0.25 A g⁻¹. A sulfur/OMPW (S/OMPW) cathode was fabricated via a simple solution method and a heat-treatment process for lithium/sulfur batteries (LSBs). The S/OMPW composite delivered a large discharge capacity reaching 1601 mAh g⁻¹ at the initial cycle, retaining 1014 mAh g⁻¹ at the 100th cycle at 0.1 C. The great electrochemical performances of the OMPW capacitor electrode and S/OMPW composite were attributed to the large specific surface areas and interconnected mesopores that could supply more active sites for the electrochemical reaction and facilitate mass transfer.

Rational design of a polypyrrole-based competent bifunctional magnetic nanocatalyst

The combination of conducting polymers with semiconductors for the fabrication of organic/inorganic hybrid nanocatalysts is one of the most promising research areas for many applications. In this work, the synthesized nanocomposite combines several advantages such as the photoresponse shift from the UV region toward visible light by narrowing the band gap of the semiconductor, magnetic separation ability and dual applications including the catalytic reduction of p-nitrophenol (PNP) and the photocatalytic degradation of methylene blue (MB) dye. In addition to the core magnetite nanoparticles (NPs), the synthesized nanocomposite contains polypyrrole (PPY) and TiO₂ shells that are decorated with silver metal NPs to prevent electron–hole recombination and to enhance the catalytic performance. Indeed, the catalytic PNP reduction experiments reveal that the synthesized nanocomposite exhibits significantly high catalytic activity with a rate constant of 0.1169 min⁻¹. Moreover, the photocatalytic experiments show that the synthesized nanophotocatalyst has a boosting effect toward MB dye degradation under normal daytime visible light irradiation with a rate constant of 6.38 × 10⁻² min⁻¹. The synergetic effect between silver NPs, PPY and TiO₂ is thought to play a fundamental role in enhancing the photocatalytic activity.

An efficient method to synthesize a magnetic nanocomposite with dual catalytic activities with a synergetic effect between Ag nanoparticles, polypyrrole and TiO₂ is described.

Nanocellulose/polypyrrole aerogel electrodes with higher conductivity via adding vapor grown nano-carbon fibers as conducting networks for supercapacitor application

Nanocellulose-based conductive materials have been widely used as supercapacitor electrodes. Herein, electrode materials with higher conductivity were prepared by in situ polymerization of polypyrrole (PPy) on cellulose nanofibrils (CNF) and vapor grown carbon fiber (VGCF) hybrid aerogels. With increase in VGCF content, the conductivities of CNF/VGCF aerogel films and CNF/VGCF/PPy aerogel films increased. The CNF/VGCF₂/PPy aerogel films exhibited a maximum value of 11.25 S cm⁻¹, which is beneficial for electron transfer and to reduce interior resistance. In addition, the capacitance of the electrode materials was improved because of synergistic effects between the double-layer capacitance of VGCF and pseudocapacitance of PPy in the CNF/VGCF/PPy aerogels. Therefore, the CNF/VGCF/PPy aerogel electrode showed capacitances of 8.61 F cm⁻² at 1 mV s⁻¹ (specific area capacitance) and 678.66 F g⁻¹ at 1.875 mA cm⁻² (specific gravimetric capacitance) and retained 91.38% of its initial capacitance after 2000 cycles. Furthermore, an all-solid-state supercapacitor fabricated by the above electrode materials exhibited maximum energy and power densities of 15.08 W h Kg⁻¹, respectively. These electrochemical properties provide great potential for supercapacitors or other electronic devices with good electrochemical properties.

The electrochemical performances of nanocellulose-based electrode materials were improved via building nano-carbon conducting networks.

Supercapacitor with high cycling stability through electrochemical deposition of metal–organic frameworks/polypyrrole positive electrode

Through electrochemical deposition, a novel positive electrode comprising ZIF-67 and polypyrrole, showing ultrahigh cycling stability (100.7%, 40 000 cycles), was fabricated.