Performance assessment of a direct borohydride-peroxide fuel cell with Pd-impregnated faujasite X zeolite as anode electrocatalyst

LTA and FAU-X Iron-Enriched Zeolites: Use for Phosphate Removal from Aqueous Medium

Hydrothermally synthesized Linde type A (LTA) and faujasite X (FAU-X) zeolites are low-cost and environmentally benign inorganic carriers for environmental applications. In this study, (oxy)hydroxides were incorporated onto LTA and FAU-X zeolites to promote the phosphate adsorption. The performance of LTA-Fe and FAU-X-Fe was evaluated through batch adsorption assays. A complete evaluation was performed to recover phosphate from synthetic wastewater. The effect of pH, concentration, equilibrium, and kinetic parameters on phosphate adsorption and its further reuse in sorption-desorption cycles were evaluated. LTA-Fe and FAU-X-Fe are effective for adsorption of phosphate at neutral (e.g., pH 7.0 ± 0.2) and in a broad range of phosphate concentrations. Higher ratios of adsorption capacities were obtained by synthetic zeolites enriched with iron in comparison to their parent forms. The phosphate adsorption occurred through hydrogen bonding and complexation reactions between protonated iron hydroxyl groups and phosphate anions. The phosphate monolayer adsorption was followed by diffusion through the internal pores and 80% of the equilibrium adsorption was reached within 50 min. The LTA-Fe and FAU-X-Fe can be used for phosphate recovery from wastewater treatment plants. The use of LTA-Fe and FAU-X-Fe in a tertiary wastewater treatment stage could allow to reduce the phosphate-phosphorous content, reaching the regulatory levels (equal 1 mg L^-1 total phosphorous). The phosphate adsorption using LTA-Fe and FAU-X-Fe does not require pH adjustment, and it is endothermic. The reusability of both iron zeolites is limited, and they can be finally disposed for soil amendment applications.

Carbon-Supported Trimetallic Catalysts (PdAuNi/C) for Borohydride Oxidation Reaction

The synthesis of palladium-based trimetallic catalysts via a facile and scalable synthesis procedure was shown to yield highly promising materials for borohydride-based fuel cells, which are attractive for use in compact environments. This, thereby, provides a route to more environmentally friendly energy storage and generation systems. Carbon-supported trimetallic catalysts were herein prepared by three different routes: using a NaBH₄-ethylene glycol complex (PdAuNi/C_SBEG), a NaBH₄-2-propanol complex (PdAuNi/C_SBIPA), and a three-step route (PdAuNi/C_3-step). Notably, PdAuNi/C_SBIPA yielded highly dispersed trimetallic alloy particles, as determined by XRD, EDX, ICP-OES, XPS, and TEM. The activity of the catalysts for borohydride oxidation reaction was assessed by cyclic voltammetry and RDE-based procedures, with results referenced to a Pd/C catalyst. A number of exchanged electrons close to eight was obtained for PdAuNi/C_3-step and PdAuNi/C_SBIPA (7.4 and 7.1, respectively), while the others, PdAuNi/C_SBEG and Pd/C_SBIPA, presented lower values, 2.8 and 1.2, respectively. A direct borohydride-peroxide fuel cell employing PdAuNi/C_SBIPA catalyst in the anode attained a power density of 47.5 mW cm⁻² at room temperature, while the elevation of temperature to 75 °C led to an approximately four-fold increase in power density to 175 mW cm⁻². Trimetallic catalysts prepared via this synthesis route have significant potential for future development.

Novel electrocatalysts for borohydride fuel cells: enhanced power generation by optimizing anodic core–shell nanoparticles on reduced graphene oxide

C_Ni–S_Pd exhibits an excellent performance and rGO is a superior support compared with Vulcan and MWCNTs.

P. Oliveira R, Stoševski I, Krstić J, Hercigonja R, Miljanić Š, Santos DMF, Šljukić B. Evaluation of silver-incorporating zeolites as bifunctional electrocatalysts for direct borohydride fuel cells

Low cost zeolites with incorporated silver show high activity for both oxygen reduction and borohydride oxidation reaction.