Fabrication of three-dimensional carbon coating for SnO2/TiO2 hybrid anode material of lithium-ion batteries

TiO2 Hollow Spheres With Flower-Like SnO2 Shell as Anodes for Lithium-Ion Batteries

SnO₂ is a promising anode material for lithium-ion batteries due to its high theoretical specific capacity and low operation voltage. However, its poor cycling performance hinders its commercial application. In order to improve the cycling stability of SnO₂ electrodes, novel flower-like SnO₂/TiO₂ hollow spheres were prepared by facile hydrothermal method using carbon spheres as templates. Their flower-like shell and mesoporous structure highlighted a large specific surface area and excellent ion migration performance. Their TiO₂ hollow sphere matrix and 2D SnO₂ nano-flakes ensured good cycle stability. The electrochemical measurements indicated that novel flower-like SnO₂/TiO₂ hollow spheres delivered a high specific capacity, low irreversible capacity loss and superior rate performance. After 1,000 cycles at current densities of 200 mA g⁻¹, the capacity of the flower-like SnO₂/TiO₂ hollow spheres was still maintained at 720 mAh g⁻¹. Their rate capacity reached 486 mAh g⁻¹ when the current densities gradually increase to 2,000 mA g⁻¹.

Tin dioxide-based nanomaterials as anodes for lithium-ion batteries

The development of new electrode materials for lithium-ion batteries (LIBs) has attracted significant attention because commercial anode materials in LIBs, like graphite, may not be able to meet the increasing energy demand of new electronic devices. Tin dioxide (SnO2) is considered as a promising alternative to graphite due to its high specific capacity. However, the large volume changes of SnO2 during the lithiation/delithiation process lead to capacity fading and poor cycling performance. In this review, we have summarized the synthesis of SnO2-based nanomaterials with various structures and chemical compositions, and their electrochemical performance as LIB anodes. This review addresses pure SnO2 nanomaterials, the composites of SnO2 and carbonaceous materials, the composites of SnO2 and transition metal oxides, and other hybrid SnO2-based materials. By providing a discussion on the synthesis methods and electrochemistry of some representative SnO2-based nanomaterials, we aim to demonstrate that electrochemical properties can be significantly improved by modifying chemical composition and morphology. By analyzing and summarizing the recent progress in SnO2 anode materials, we hope to show that there is still a long way to go for SnO2 to become a commercial LIB electrode and more research has to be focused on how to enhance the cycling stability.

Role of Synthetic Parameters on the Structural and Optical Properties of N,Sn-Copromoted Nanostructured TiO2: A Combined Ti K-Edge and Sn L2,3-Edges X-ray Absorption Investigation

Sn-modification of TiO2 photocatalysts has been recently proposed as a suitable strategy to improve pollutant degradation as well as hydrogen production. In particular, visible light activity could be promoted by doping with Sn2+ species, which are, however, thermally unstable. Co-promotion with N and Sn has been shown to lead to synergistic effects in terms of visible light activity, but the underlying mechanism has, so far, been poorly understood due to the system complexity. Here, the structural, optical, and electronic properties of N,Sn-copromoted, nanostructured TiO2 from sol-gel synthesis were investigated: the Sn/Ti molar content was varied in the 0-20% range and different post-treatments (calcination and low temperature hydrothermal treatment) were adopted in order to promote the sample crystallinity. Depending on the adopted post-treatment, the optical properties present notable differences, which supports a combined role of Sn dopants and N-induced defects in visible light absorption. X-ray absorption spectroscopy at the Ti K-edge and Sn L2,3-edges shed light onto the electronic properties and structure of both Ti and Sn species, evidencing a marked difference at the Sn L2,3-edges between the samples with 20% and 5% Sn/Ti ratio, showing, in the latter case, the presence of tin in a partially reduced state.

Ultrafast and Stable Lithium Storage Enabled by the Electric Field Effect in Layer-Structured Tablet-Like NH4TiOF3 Mesocrystals

Design and synthesis of advanced electrode materials with fast and stable ion storage are of importance for energy storage applications. Herein, we propose that introducing the heterogeneous interface in layer-structured mesocrystals is an efficient way to greatly improve the rate capability and cycle stability of lithium-ion battery (LIB) devices. NH₄TiOF₃ mesocrystals were employed as a typical model system to demonstrate the idea. The NH₄TiOF₃ mesocrystals were obtained via the hydrothermal reaction, and the NH₄TiOF₃/TiO₂ interfaces were generated through calcining at different temperatures under an argon atmosphere. Phase composition, microstructure, and chemical analyses show that the as-prepared NH₄TiOF₃ mesocrystals possess "tablet-like" morphology, and the formation of the NH₄TiOF₃/TiO₂ interface can be controlled by the calcination temperature. When evaluated as the anode for LIBs, the optimized sample (NH₄TiOF₃ calcined at 250 °C, NTF-250) shows excellent, fast, and stable lithium storage properties. Specifically, the NTF-250 electrode holds a reversible capacity of 159.5 mA h g^-1 after 200 cycles at 0.2 A g^-1. At a high current density of 20 A g^-1, the electrode still maintains a reversible capacity of 89.6 mA h g^-1 and reaches a reversible capacity of 128.6 mA h g^-1 at a current density of 1 A g^-1 after 2000 cycles. Theoretical and experimental studies show that the synergistic effects of the heterogeneous NH₄TiOF₃/anatase TiO₂ interface in the layer-structured NH₄TiOF₃ mesocrystals lead to the upgraded electrochemical properties. Especially, the local build-in electric field induced by the nonuniform distribution of charge across the NH₄TiOF₃/anatase TiO₂ interface facilitates the charge transport during the charging and discharging cycling. The current electrode design strategy paves a new way in boosting stable ion storage and thus is of great interest in energy storage and conversion.

Carbon Nanotubes Coupled with Metal Ion Diffusion Layers Stabilize Oxide Conversion Reactions in High-Voltage Lithium-Ion Batteries

Creating new architectures combined with super diverse materials for achieving more excellent performances has attracted great attention recently. Herein, we introduce a novel dual metal (oxide) microsphere reinforced by vertically aligned carbon nanotubes (CNTs) and covered with a titanium oxide metal ion-transfer diffusion layer. The CNTs penetrate the oxide particles and buffer structural volume change while enhancing electrical conductivity. Meanwhile, the external TiO₂-C shell serves as a transport pathway for mobile metal ions (e.g., Li⁺) and acts as a protective layer for the inner oxides by reducing the electrolyte/metal oxide interfacial area and minimizing side reactions. The proposed design is shown to significantly improve the stability and Coulombic efficiency (CE) of metal (oxide) anodes. For example, the as-prepared MnO-CNTs@TiO₂-C microsphere demonstrates an extremely high capacity of 967 mA h g^-1 after 200 cycles, where a CE as high as 99% is maintained. Even at a harsh rate of 5 A g^-1 (ca. 5 C), a capacity of 389 mA h g^-1 can be maintained for thousands of cycles. The proposed oxide anode design was combined with a nickel-rich cathode to make a full-cell battery that works at high voltage and exhibits impressive stability and life span.

Role of the growth step on the structural, optical and surface features of TiO2/SnO2 composites

TiO2/SnO2 composites have attracted considerable attention for their application in photocatalysis, fuel cells and sensors. Structural, morphological, optical and surface features play a pivotal role in photoelectrochemical applications and are critically related to the synthetic route. Most of the reported synthetic procedures require high-temperature treatments in order to tailor the sample crystallinity, usually at the expense of surface hydroxylation and morphology. In this work, we investigate the role of a treatment in an autoclave at a low temperature (100°C) on the sample properties and photocatalytic performance. With respect to samples calcined at 400°C, the milder crystallization treatment promotes anatase phase, mesoporosity and water chemi/physisorption, while reducing the incorporation of heteroatoms within the TiO2 lattice. The role of Sn content was also investigated, showing a marked influence, especially on the structural properties. Notably, at a high content, Sn favours the formation of rutile TiO2 at very low reaction temperatures (100°C), thanks to the structural compatibility with cassiterite SnO2. Selected samples were tested towards the photocatalytic degradation of tetracycline in water under UV light. Overall, the low-temperature treatment enables to tune the TiO2 phase composition while maintaining its surface hydrophilicity and gives rise to well-dispersed SnO2 at the TiO2 surface.