Modulating the photoelectrochemical response of titanium dioxide (TiO2) photoelectrodes using gold (Au) nanoparticles excited at different wavelengths

Laser-Treated MXene as an Electrochemical Agent to Boost Properties of Semitransparent Photoelectrode Based on Titania Nanotubes

In this study, Ti3C2Tx underwent laser treatment to reshape it, resulting in the formation of a TiO2/Ti3C2Tx heterojunction. The interaction with laser light induced the formation of spherical TiO2 composed of an anatase-rutile phase on the Ti3C2Tx surface. Such a heterostructure was loaded over a titania nanotube (TNT) layer, and the surface area was enhanced through immersion in a TiCl4 solution followed by thermal treatment. Consequently, the photon-to-electron conversion efficiency exhibits a 10-fold increase as compared to bare TNT. Moreover, for the sample produced with optimized conditions, five times higher photoactivity is observed in comparison to bare TNT. It was shown that under visible light irradiation the most photoactive heterojunction based on the tubular layer reveals a substantial drop in the charge transfer resistance of about 32% with respect to the dark condition. This can be attributed to the narrower band gaps of the modified material and improvement of the separation efficiency of the photogenerated electron-hole pairs. Overall results suggest that this investigation underscores TiO2/Ti3C2Tx as a promising noble-metal-free material that enhances both the electrochemical and photoelectrochemical performances of electrode materials based on TNT that can be further used in light-harvesting applications.

Investigating the use of titanium dioxide (TiO2) nanoparticles on the amount of protection against UV irradiation

In this study, three samples of commercial titanium dioxide nanoparticles (TiO₂) in different sizes were used to investigate their effect on the formulation of sunscreen creams. The aim was to evaluate their role in the performance of sunscreens (i.e. SPF, UVAPF, and critical wavelength). Then the particle size of these samples was determined by photon correlation spectroscopy methods. As a result, the size of primary particles was reduced by using milling and homogenization methods at different times. The results showed that the particle size of samples TA, TB, and TC in the ultrasonic homogenizer decreased from 966.4, 2745.8, and 2471.6 nm to 142.6, 254.8, and 262.8 nm, respectively. These particles were used in the pristine formulation. Then the functional characteristics of each formulation were determined by standard methods. TA had the best dispersion in cream compared to other samples due to its smaller size (i.e. 142.6 nm). For each formulation, two important parameters, including pH and TiO₂ dosage, were investigated in different states. The results showed that the formulations prepared with TA had the lowest viscosity compared to formulations containing TB and TC. SPSS 17 statistical software analysis of variance showed that the performance of SPF, UVAPF and λc in formulations containing TA had the highest levels. Also, the sample containing TAU with the lowest particle size values had the highest protection against UV rays (SPF). According to the photocatalytic functionality of TiO₂, the photodegradation of methylene blue in the presence of each nanoparticle of TiO₂ was studied. The results showed that smaller nanoparticles (i.e. TA) had more photocatalytic activity under UV-Vis irradiation during 4 h (TA (22%) > TB (16%) > TC (15%)). The results showed that titanium dioxide can be used as a suitable filter against all types of UVA and UVB rays.

In-depth interpretation of aptamer-based sensing on electrode: Dual-mode electrochemical-photoelectrochemical sensor for the ratiometric detection of patulin

Electrochemical aptasensors have been extensively used to quantify food contaminants (e.g., mycotoxin) by using high-affinity aptamer for target recognition. Yet, analytical performance of aptasensors using different aptamers can be varied for the same target. Here, four aptamers with different sequences (i.e., A22, A34, A42, and A45) of patulin (PAT) were selected to estimate sensing behaviors at electrodes with electrochemical (EC) and photoelectrochemical (PEC) assays. Synergistic effect of steric hindrance and electron transfer distance was found to significantly affect EC and PEC response for PAT at aptasensors fabricated with A22, A34, A42, or A45. Eventually, A22 emerged to be the optimal aptamer for aptasensing, despite the highest affinity of A42 to PAT. The A22-based EC-PEC dual-mode ratiometric aptasensor offered a linear range of 50 fg mL^-1 - 500 ng mL^-1 with a detection limit of 30 fg mL^-1 for PAT, and it was applied to apple product (i.e., juice, puree) analysis.

A universal bacterial sensor created by integrating a light modulating aptamer complex with photoelectrochemical signal readout

Photoelectrochemical (PEC) signal transduction is of great interest for ultrasensitive biosensing; however, signal-on PEC assays that do not require target labeling remain elusive. In this work, we developed a signal-on biosensor that uses nucleic acids to modulate PEC currents upon target capture. Target presence removes a biorecognition probe from a DNA duplex carrying a gold nanoparticle, bringing the gold nanoparticle in direct contact to the photoelectrode and increasing the PEC current. This assay was used to develop a universal bacterial detector by targeting peptidoglycan using an aptamer, demonstrating a limit-of-detection of 82 pg/mL (13 pM) in buffer and 239 pg/mL (37 pM) in urine for peptidoglycan and 1913 CFU/mL forEscherichia coliin urine. When challenged with a panel of unknown targets, the sensor identified samples with bacterial contamination versus fungi. The versatility of the assay was further demonstrated by analyzing DNA targets, which yielded a limit-of-detection of 372 fM.