Prioritizing research for trace pollutants and emerging contaminants in the freshwater environment

A Zwitterionic Hydrogel-Based Heterogeneous Fenton Catalyst for Water Treatment

Persistent organic pollutants (POPs), including xenoestrogens and polyfluoroalkyl substances (PFAS), demand urgent global intervention. Fenton oxidation, catalyzed by iron ions, offers a cost-effective means to degrade POPs. However, numerous challenges like acid dependency, catalyst loss, and toxic waste generation hinder practical application. Efforts to create long-lasting heterogeneous Fenton catalysts, capable of simultaneously eliminating acid requirements, sustaining rapid kinetics, and retaining iron efficiently, have been unsuccessful. This study introduces an innovative heterogeneous zwitterionic hydrogel-based Fenton catalyst, surmounting these challenges in a cost-effective and scalable manner. The hydrogel, hosting individually complexed iron ions in a porous scaffold, exhibits substantial effective surface area and kinetics akin to homogeneous Fenton reactions. Complexed ions within the hydrogel can initiate Fenton degradation at neutral pH, eliminating acid additions. Simultaneously, the zwitterionic hydrogel scaffold, chosen for its resistance to Fenton oxidation, forms strong bonds with iron ions, enabling prolonged reuse. Diverging from existing designs, the catalyst proves compatible with UV-Fenton processes and achieves rapid self-regeneration during operation, offering a promising solution for the efficient and scalable degradation of POPs. The study underscores the efficacy of the approach by demonstrating the swift degradation of three significant contaminants-xenoestrogens, pesticides, and PFAS-across multiple cycles at trace concentrations.

Construction of a Conductive Polymer/AuNP/Cyanobacteria-Based Biophotovoltaic Cell Harnessing Solar Energy to Generate Electricity via Photosynthesis and Its Usage as a Photoelectrochemical Pesticide Biosensor: Atrazine as a Case Study

In this research, a cyanobacteria (Leptolyngbia sp.)-based biological photovoltaic cell (BPV) was designed. This clean energy-friendly BPV produced a photocurrent as a result of illuminating the photoanode and cathode electrodes immersed in the aqueous medium with solar energy. For this purpose, both electrodes were first coated with conductive polymers with aniline functional groups on the gold electrodes. In the cell, the photoanode was first coated with a gold-modified poly 4-(2,5-di(thiophen-2-yl)-1H-pyrrol-1-yl)benzamine polymer, P(SNS-Aniline). Thioaniline-functionalized gold nanoparticles were used to provide a cross-link formation with bis-aniline conductive bonds with the conductive polymer using electrochemical techniques. Leptolyngbia sp., one of the cyanobacteria that can convert light energy into chemical energy, was attached to this layered electrode surface. The cathode of the cell was attached to the gold electrode surface with P(SNS-Aniline). Then, the bilirubin oxidase (BOx) enzyme was immobilized on this film surface with glutaraldehyde activation. This cell, which can use light, thanks to cyanobacteria, oxidized and split water, and oxygen was obtained at the photoanode electrode. At the cathode electrode, the oxygen gas was reduced to water by the bioelectrocatalytic method. To obtain a high photocurrent from the BPV, necessary optimizations were made during the design of the system to increase electron transport and strengthen its transfer. While the photocurrent value obtained with the designed BPV in optimum conditions and in the pseudosteady state was 10 mA/m2, the maximum power value obtained was 46.5 mW/m2. In addition to storing the light energy of the system, studies have been carried out on this system as a pesticide biosensor. Atrazine biosensing via the BPV system was analytically characterized between 0.1 and 1.2 μM concentrations for atrazine, and a very low detection limit was found as 0.024 μM. In addition, response time and recovery studies related to pesticide biosensor properties of the BPV were also investigated.

Occurrence, distribution, and health risk assessment of pyrethroid and neonicotinoid insecticides in aquatic products of China

Synthetic pyrethroid insecticides (SPIs) and neonicotinoid insecticides (NEOs), now dominant in the insecticide market, are increasingly found in aquatic environments. This study focused on six SPIs and five NEOs in aquatic products from four Chinese provinces (Shandong, Hubei, Shanxi and Zhejiang) and the risk assessment of the safety for the residents was conducted. It revealed significantly higher residues of Σ6SPIs (6.27-117.19 μg/kg) compared to Σ5NEOs (0.30-14.05 μg/kg), with SPIs more prevalent in fish and NEOs in shellfish. Carnivorous fish showed higher pesticide levels. Residues of these two types of pesticides were higher in carnivorous fish than in fish with other feeding habits. In the four regions investigated, the hazard quotient and hazard index of SPIs and NEOs were all <1, indicating no immediate health risk to human from single and compound contamination of the two types of pesticides in aquatic products. The present study provides valuable information for aquaculture management, pollution control and safeguarding human health.

Occurrence of phthalic acid esters (PAEs) and active pharmaceutical ingredients (APIs) in key species of anthozoans in Mediterranean Sea

The Mediterranean Sea's biodiversity is declining due to climate change and human activities, with plastics and emerging contaminants (ECs) posing significant threats. This study assessed phthalic acid esters (PAEs) and active pharmaceutical ingredients (APIs) occurrence in four anthozoan species (Cladocora caespitosa, Eunicella cavolini, Madracis pharensis, Parazoanthus axinellae) using solid phase microextraction (SPME) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS). All specimens were contaminated with at least one contaminant, reaching maximum values of 57.3 ng/g for the ∑PAEs and 64.2 ng/g (wet weight) for ∑APIs, with dibutyl phthalate and Ketoprofen being the most abundant. P. axinellae was the most contaminated species, indicating higher susceptibility to bioaccumulation, while the other three species showed two-fold lower concentrations. Moreover, the potential adverse effects of these contaminants on anthozoans have been discussed. Investigating the impact of PAEs and APIs on these species is crucial, given their key role in the Mediterranean benthic communities.

Combination of multivariate data analysis and mixing modelling to assess tracer potential of contaminants of emerging concern in aquifers

Collected evidence has shown that contaminants of emerging concern (CECs) in conjunction with more conventional tracers (major ions, nutrients, isotopes etc.) can be used to trace pollution origin in aquatic systems. However, in highly mixed aquifer systems signals obtained from conventional tracers overlap diminishing their potential to be used as tracers. In this study, we present an approach that incorporates multivariate statistical analysis (principal component analysis (PCA) and Kohonen's Self-Organizing Map method (SOM)) and mixing modelling to identify the most suitable CECs to be employed as anthropogenic tracers. The study area is located in the Besòs River Delta (Barcelona, NE Spain) and represents the highly mixed aquifer system. A one-year monthly based monitoring campaign was performed to collect the information about the concentrations of 105 CECs as well as major and minor ions in the river and along the groundwater flow. The dimensionality of the obtained dataset was reduced to 25 CECs, based on their estimated health risk effects, for multivariate data analysis. The obtained results showed the overlap of conventional tracers' signals obtained from PCA. In case of CECs, PCA revealed differences in their distributions allowing the differentiation of the roles of natural attenuation processes, local and regional flows on their occurrence in different parts of the aquifer. This was not possible to do using solely CECs' distribution profiles. SOMs provided the lacking information about the modality of the distribution of each CECs, revealing their ability to represent factors controlling the groundwater hydrochemistry, which assist in defining their tracer potential. Based on the obtained results four identified persistent CECs, two with unimodal (lamotrigine and 5-Desamino-5-oxo-lamotrigine) and two with bimodal (carbamazepine and diazepam (higher modality was not revealed)) distributions, were selected to run a mixing model to compare their tracer performance.

Rethinking terrestrial dissolved organic matter in dam reservoirs before mixing: Linking photodegradation and biodegradation and the phenanthrene binding behavior

With the increased construction of dam reservoirs and the demand for water security, terrestrial dissolved organic matter (DOM) has received attention because of its role in regulating water quality, ecological functions, and the fate and transport of pollutants in dam reservoirs. This study investigated the transformations of soil DOM and vegetation DOM of dam reservoirs following photodegradation and biodegradation before conservative mixing, as well as the resultant effects on phenanthrene binding. Based on the results, terrestrial DOM could undergo transformation via photodegradation and biodegradation before conservative mixing in dam reservoirs. Although both processes resulted in substantial decreases in DOM concentrations, the changes in chromophoric DOM and fluorescent DOM depended on the original DOM sources. Furthermore, the photodegradation of terrestrial DOM resulted in more pronounced photobleaching than photomineralization. In addition, photodegradation of terrestrial DOM resulted in the generation of DOM-derived by-products with low molecular weight and low aromaticity, whereas the biodegradation of terrestrial DOM resulted in DOM-derived by-products with low molecular weight and high aromaticity. Subsequently, the photodegradation and biodegradation of terrestrial DOM substantially enhanced the binding affinity of phenanthrene. Soil DOM is prior to vegetation DOM when predicting the ecological risk of HOCs. These results indicate that the terrestrial DOM in dam reservoirs should be reconsidered before conservative mixing. Further studies on the coupling effects of both biogeochemical processes, as well as on the relative contributions of soil DOM and vegetation DOM after transformation to the aquatic DOM in dam reservoirs, are required. This study provides information on the environmental effects of dam construction from the perspective of biogeochemical processes.

An integrated modelling framework for multiple pollution source identification in surface water

Pollution source identification is vital in water safety management. An integrated simulation-optimization modelling framework comprising a process-based hydrodynamic water quality model, artificial neural network surrogate model and particle swarm optimization (PSO) was proposed to achieve rapid, accurate and reliable pollution source identification. In this study, the hydrodynamics and water quality processes in a straight lab-based flume were simulated to test pollution source identification under steady flow conditions. Additionally, the pollution source identification in the unsteady flow conditions was examined using a real-life estuary, specifically the Yangtze River estuary. First, we developed two process-based models to simulate hydrodynamics and water quality in the flume and estuary. Then, the data generated from the process-based models were used to develop surrogate models. Three typical artificial neural networks (ANNs) algorithms: backpropagation (BP), radial basis function (RBF) and general regression neural networks (GRNN) were selected to develop surrogates for process-based models (PBMs), and they were coupled with PSO algorithm to achieve the hybrid modelling framework for pollution source identification. Our results showed that hybrid PBM-ANNs-PSO models could be applied to identify the pollution source and quantify release intensity in spatial distribution when the discharge type was assumed as the point source with a continuous release. Multiple-performance criteria metrics, in terms of the coefficient of determination, root-mean-square error, mean absolute error, evaluated the model performance as "Excellent prediction". The BP-PSO models consistently appear to be the top-performing source identification model within the developed models, with most cases of relative error (RE) values lower than 5%. The new insights from the hybrid modelling framework would provide useful information for the local government agency to make reasonable decisions regarding pollution source identification issues.

Production of Dichloroacetonitrile from Derivatives of Isoxaflutole Herbicide during Water Treatment

The herbicide isoxaflutole has the potential to contaminate drinking water directly, as well as upon hydrolyzing to its active form diketonitrile. Diketonitrile also may impact water quality by acting as a precursor for dichloroacetonitrile (DCAN), which is an unregulated but highly toxic disinfection byproduct (DBP). In this study, we investigated the reaction of diketonitrile with free chlorine and chloramine to form DCAN. We found that diketonitrile reacts with free chlorine within seconds but reacts with chloramine on the time scale of hours to days. In the presence of both oxidants, DCAN was generated at yields up to 100%. Diketonitrile reacted fastest with chlorine at circumneutral pH, which was consistent with base-catalyzed halogenation involving the enolate form of diketonitrile present at alkaline pH and electrophilic hypochlorous acid, which decreases in abundance above its pKa (7.5). In contrast, we found that diketonitrile reacts faster with chloramine as pH values decreased, consistent with an attack on the enolate by electrophilic protonated monochloramine that increases in abundance at acidic pH approaching its pKa (1.6). Our results indicate that increasing isoxaflutole use, particularly in light of the recent release of genetically modified isoxaflutole-tolerant crops, could result in greater occurrences of a high-yield DCAN precursor during disinfection.

Contaminants of emerging concern in the urban aquifers of Barcelona: Do they hamper the use of groundwater?

Urban aquifers are an alternative to obtain freshwater, but they are frequently polluted by contaminants of emerging concern (CECs). Therefore, there is a need to ascertain whether CECs are a water management challenge as they might limit the use of groundwater as safe drinking water even at ng L-1 concentration levels. To answer this question, it is required to evaluate human health-risk effects of measured CECs in the groundwater and to understand their behaviour at a field-scale. This study compiles data about the presence of CECs in the aquifers of Barcelona and its metropolitan area, evaluates health risk effects of measured CECs in the groundwater and presents approaches implemented to identify and quantify the coupled hydro-thermo-chemical processes that govern their fate in the subsurface. Some CECs might be harmful to humans, such as 5-methyl-1H-benzotriazole and the pharmaceuticals azithromycin valsartan, valsartan acid, lamotrigine, gabapentin, venlafaxine and lidocaine, which show very high to intermediate health risk effects. The number of harmful CECs and the level of their hazard increase from the groups of adults and 14-18 years old teens to the groups of 4-8 years old and 1-2 years old children. Thus, some CECs can limit the use of groundwater in Barcelona as potential drinking water source. Finally, knowledge gaps in understanding the integration of these processes into urban water resources management plans are identified, which will help to define groundwater potential uses and to assure the adequate protection of the human health and the environment.

Impact of the Configurational Microstructure of Carboxylate-Rich Chitosan Beads on Its Adsorptive Removal of Diclofenac Potassium from Contaminated Water

A novel adsorbent-contaminant system was investigated for its ability to remove a contaminant of emerging concern, diclofenac potassium, from contaminated water. Bio-based crosslinked chitosan beads functionalized with poly(itaconic acid) side chains were examined for their potential to remove the emerging contaminant. To evaluate the impact of the polymeric microstructure on its adsorptive capacity, several adsorbent samples were prepared using different combinations of initiator and monomeric concentrations. Fourier Transform Infrared (FTIR) analysis confirmed the crosslinking of the chitosan chains and the incorporation of the carboxylic groups on the surface of the final chitosan beads. After the grafting copolymerization process, an additional peak at 1726 cm-1 corresponding to the carboxylic C=O groups of the grafted chains appeared, indicating the successful preparation of poly(IA)-g-chitosan. Thermal stability studies showed that the grafting copolymerization improved the thermal stability of the beads. X-ray and Scanning Electron Microscopy confirmed the successful grafting of the itaconic acid on the surface of the beads. The study revealed that the higher the initiator concentration, the greater the number of side chains, whereas the higher the monomeric concentration, the longer the length of these side chains. The adsorption mechanism involved hydrogen bonding to the carboxylic groups of the grafted chains along with n-π* stacking interaction between the amino group of the chitosan and the aromatic rings of diclofenac potassium. The adsorption efficiencies of diclofenac potassium onto the grafted beads were significantly improved compared to the unfunctionalized chitosan beads, reaching values above 90%. The removal efficiency of grafted chitosan increased with an increase in the concentration in the range of 10-30 ppm and then flattened out in the range of 30-50 ppm. The removal efficiencies of 1-50 ppm of DCF ranged between about 75% and 92% for the grafted chitosan and 30-45% for the crosslinked chitosan. Rapid adsorption occurred within 20 min for all grafted sample combinations, and the adsorption kinetics followed a pseudo-second-order model with qe values ranging from 28 to 44.25 g/mg and R2 values greater than 0.9915. The results highlight the potential of grafted chitosan beads in removing emerging contaminants from contaminated water without harming the environment.

Application of magnetic-nanoparticle functionalized whole-cell biosensor array for bioavailability and ecotoxicity estimation at urban contaminated sites

The bioavailability and ecotoxicity of pollutants are important for urban ecological systems and human health, particularly at contaminated urban sites. Therefore, whole-cell bioreporters are used in many studies to assess the risks of priority chemicals; however, their application is restricted by low throughput for specific compounds and complicated operations for field tests. In this study, an assembly technology for manufacturing Acinetobacter-based biosensor arrays using magnetic nanoparticle functionalization was developed to solve this problem. The bioreporter cells maintained high viability, sensitivity, and specificity in sensing 28 priority chemicals, seven heavy metals, and seven inorganic compounds in a high-throughput manner, and their performance remained acceptable for at least 20 d. We also tested the performance by assessing 22 real environmental soil samples from urban areas in China, and our results showed positive correlations between the biosensor estimation and chemical analysis. Our findings prove the feasibility of the magnetic nanoparticle-functionalized biosensor array to recognize the types and toxicities of multiple contaminants for online environmental monitoring at contaminated sites.

Twelve natural estrogens and ten bisphenol analogues in eight drinking water treatment plants: Analytical method, their occurrence and risk evaluation

Bisphenol analogues (BPs) and natural estrogens (NEs) as two important groups of endocrine-disrupting compounds (EDCs) in drinking water treatment plants (DWTPs) have been hardly investigated except bisphenol A (BPA) and three major NEs including estrone (E1), 17β-estradiol (E2) and estriol (E3). In this study, a GC-MS analytical method was firstly established and validated for trace simultaneous determination of ten BPs and twelve NEs in drinking water, which included BPA, bisphenol B (BPB), bisphenol C (BPC), bisphenol E (BPE), bsiphenol F (BPF), bsiphenol P (BPP), bisphenol S (BPS), bisphenol Z (BPZ), bisphenol AF (BPAF), bisphenol AP (BPAP), E1, E2, E3, 17α-estradiol (17α-E2), 2-hydroestrone (2OHE1), 16hydroxyestrone (16α-OHE1), 4-hydroestrone (4OHE1), 2-hydroxyesstradiol (2OHE2), 4-hydroxyestradiol (4OHE2), 17-epiestriol (17epiE3), 16-epiestriol (16epiE3) and 16keto-estraiol (16ketoE2). This investigation showed that eighteen out of twenty-two targeted compounds were detected in drinking source waters of eight DWTPs with concentrations ranging from not detected to 142.8 ng/L. Although the conventional treatment process of DWTP could efficiently remove both BPs and NEs with respective removal efficiencies of 74.1%-90.9% and 74.5%-100%, BPA, BPS, BPE, BPZ, E1, 2OHE1, and 2OHE2 were found in the finished drinking waters. Chlorination could remove part of BPs and NEs, but the efficiency varied greatly with DWTP and the reason was unknown. In the finished drinking waters of eight DWTPs, the highest chemically calculated estrogen equivalence (EEQ) derived from BPs and NEs was up to 6.11 ngE2/L, which was over 22 times that could do harm to zebrafish, indicating a potential risk to human health. Given the fact that many chlorination products of BPs and NEs likely have higher estrogenic activities, the estrogenic effect of BPs and NEs in finished drinking water should be accurately examined urgently with the inclusion of BPs, NEs as well as their main chlorinated by-products. This study shed new light on the occurrence, removal, and potential estrogenic effects of BPs and NEs in DWTPs.

Occurrence, environmental impact and fate of pharmaceuticals in groundwater and surface water: a critical review

In many nations and locations, groundwater serves as the population's primary drinking water supply. However, pharmaceuticals found in groundwater and surface waters may affect aquatic ecosystems and public health. As a result, their existence in natural raw waters are now more widely acknowledged as a concern. This review summarises the evidence of research on pharmaceuticals' occurrence, impact and fate, considering results from different water bodies. Also, various analytical techniques were reviewed to compare different pharmaceuticals' detection frequencies in water bodies. These include liquid chromatography-mass spectrometry (LC-MS), high-performance liquid chromatography (HPLC), ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS), and gas chromatography-mass spectrometry (GC-MS). However, owing to LC-MS's high sensitivity and specification, it is the most reported instrument used for analysis. The PRISMA reviewing methodology was adopted based on relevant literature in order to focus on aim of the review. Among other pharmaceuticals reviewed, sulfamethoxazole was found to be the most frequently detected drug in wastewater (up to 100% detection frequency). The most reported pharmaceutical group in this review is antibiotics, with sulfamethoxazole having the highest concentration among the analysed pharmaceuticals in groundwater and freshwater (up to 5600 ng/L). Despite extensive study and analysis on the occurrence and fate of pharmaceuticals in the environment, appropriate wastewater management and disposal of pharmaceuticals in the water environment are not still monitored regularly. Therefore, there is a need for mainstream studies tailored to the surveillance of pharmaceuticals in water bodies to limit environmental risks to human and aquatic habitats in both mid and low-income nations.

Effects of combining flow intermittency and exposure to emerging contaminants on the composition and metabolic response of streambed biofilm bacterial communities

Freshwater ecosystems are characterised by the co-occurrence of stressors that simultaneously affect the biota. Among these, flow intermittency and chemical pollution severely impair the diversity and functioning of streambed bacterial communities. Using an artificial streams mesocosm facility, this study examined how desiccation and pollution caused by emerging contaminants affect the composition of stream biofilm bacterial communities, their metabolic profiles, and interactions with their environment. Through an integrative analysis of the composition of biofilm communities, characterization of their metabolome and composition of the dissolved organic matter, we found strong genotype-to-phenotype interconnections. The strongest correlation was found between the composition and metabolism of the bacterial community, both of which were influenced by incubation time and desiccation. Unexpectedly, no effect of the emerging contaminants was observed, which was due to the low concentration of the emerging contaminants and the dominant impact of desiccation. However, biofilm bacterial communities modified the chemical composition of their environment under the effect of pollution. Considering the tentatively identified classes of metabolites, we hypothesised that the biofilm response to desiccation was mainly intracellular while the response to chemical pollution was extracellular. The present study demonstrates that metabolite and dissolved organic matter profiling may be effectively integrated with compositional analysis of stream biofilm communities to yield a more complete picture of changes in response to stressors.

Environmental Risk Assessment of Drugs in Tropical Freshwaters Using Ceriodaphnia silvestrii as Test Organism

In this study we evaluated the acute (immobility/mortality) and chronic (survival and reproduction) effects of the drugs caffeine, diclofenac sodium salt, ketoprofen, paracetamol and salicylic acid on the cladoceran Ceriodaphnia silvestrii. The environmental risks of these substances for tropical freshwaters were estimated from the risk quotient MEC/PNEC. Sensitivity in acute exposures varied up on the drug as follows: salicylic acid (EC₅₀ = 69.15 mg L^- 1) < caffeine (EC₅₀ = 45.94 mg L^- 1) < paracetamol (EC₅₀ = 34.49 mg L^- 1) < ketoprofen (EC₅₀ = 24.84 mg L^- 1) < diclofenac sodium salt (EC₅₀ = 14.59 mg L^- 1). Chronic toxicity data showed negative effects of the drugs on reproduction. Paracetamol and salicylic acid caused reduction in fecundity in concentrations starting from 10 mg L^- 1 and 35 mg L^- 1, respectively. Ketoprofen caused total inhibition at 5 mg L^- 1. MEC/PNEC values were relatively low for all drugs. The risk was estimated as low or insignificant, except for caffeine, whose MEC/PNEC value was greater than 1 (moderate risk).

Could manganate be an alternative of permanganate for micropollutant abatement?

Permanganate (MnO₄^-), an oxidant that has been applied in water treatment, has highly varied reactivity toward pollutants. In this study, we found manganate (MnO₄^2-) could destruct diverse functional groups, with oxidation rates being higher than that of permanganate under acidic and neutral conditions. Mechanistic study revealed manganate rapidly disproportionated to permanganate and colloidal MnO₂ in solution. Under acidic conditions, the in-situ formed colloidal MnO₂ possess higher reactivity than permanganate and primarily contributed to the degradation of pollutants. The reactivity of in-situ formed colloidal MnO₂ is highly sensitive to pH and decreased dramatically with increasing pH. Consequently, the contribution of MnO₂ to pollutant removal decreased with elevating pH, which also leads to the decreased degradation efficiency of micropollutants at high pH. Manganate is an intermediate produced during the manufacturing process of permanganate. This study indicates that manganate might be an alternative of permanganate for water purification under acidic and neutral conditions.

Natural manganese sand activates sodium hypochlorite to enhance ionic organic contaminants removal: Optimization, modeling, and mechanism

Although sodium hypochlorite acting as an oxidant has been investigated for the role it plays in the degradation of organic contaminants, little attention has been paid to its activation and efficient utilization. In this study, natural manganese sand (NMS) was verified to be effective for activation of sodium hypochlorite (NaClO). Due to the generation of O₂^-, the removal efficiency of ionic organic contaminants in NMS/NaClO system was 1.9-4.1 times higher than that in NMS or NaClO alone. Hence, NMS activated NaClO system performed ~96.6 % contaminants removal efficiency at a wide pH range (pH 5-9). Kinetic modeling yielded that the NMS dosage was more important than NaClO dosage. Long-term stability was observed in the presence of various salts (bicarbonate, sulfate, phosphate, and chloride). Characterization results revealed that electron transfer among NMS, NaClO, and organic contaminants was responsible for NaClO activation. Then NaClO-based Fenton-like process was proposed by tracing the degradation intermediates of methyl orange (MO) and generations of reactive oxygen species in the MO/NMS/NaClO system. This study presents the potential of NMS to activate NaClO and enhance ionic organic contaminants removal from aquatic environments.

Super-adsorbent microspheres based on a triallyl isocyanurate-maleic anhydride copolymer for the removal of organic pollutants from water

Owing to the frequent occurrence of diclofenac sodium (DS) in fresh aquatic environments and its potential toxicity towards living organisms, the effective removal of DS has attracted worldwide attention. Herein, a green and efficient strategy to fabricate crosslinked microspheres with interconnected mesoporous structures and abundant adsorption active sites was developed. With this strategy, triallyl isocyanurate (TAIC)-maleic anhydride (MAH) copolymer microspheres (TMs) with a diameter of 1.19-1.35 μm were first prepared by self-stabilized precipitation (2SP) polymerization, and the TMs possess a large amount reactive anhydride groups (62.5-71.8 mol%), a specific surface area of 51.6-182.4 m² g^-1 and a mesoporous structure (average pore size: 3.4-3.8 nm). Then the TMs were further functionalized with polyethylenimine (PEI) to give rise to cationic microspheres (Cat-TMs), which showed excellent adsorption performance to DS with a rapid adsorption rate (reached equilibrium within 30 min), a very high equilibrium adsorption capacity (1421 mg g^-1) and excellent recyclability. The pseudo-second-order model and Langmuir model were a good fit for the adsorption kinetic and isotherm process, respectively. Furthermore, due to the high cation density (4.291 mmol g^-1) and excellent pH buffer capacity of Cat-TMs, the adsorption capacity can be maintained at a high level within the pH range of 6-10. The regenerated Cat-TMs showed only a slight loss (<5%) in the adsorption capacity even after 5 adsorption-desorption cycles. In short, Cat-TMs can be considered as a highly promising adsorbent for the rapid and ultra-efficient removal of anionic organic contaminants and have significant potential to be applied in wastewater treatment.

Rapid Removal of Organic Pollutants from Aqueous Systems under Solar Irradiation Using ZrO2/Fe3O4 Nanoparticles

Pure water scarcity is an emerging, all-around problem that globally affects both the life quality and the world's economy. Heterogeneous photocatalysis under solar irradiation is a promising technique for the organic pollutants (e.g., pesticides, drugs) removal from an aqueous environment. Furthermore, the drawbacks of commercially available photocatalysts can be successfully overcome by using innovative nanoparticles, such as ZrO₂/Fe₃O₄. Four ZrO₂/Fe₃O₄ nanopowders with a different mass ratio of ZrO₂ and Fe₃O₄ were synthesized using the chemical co-precipitation method. XRD analysis showed the presence of magnetite and hematite Fe-oxide phases in all samples. The content of the magnetite phase increased with the addition of 19% ZrO₂. The efficiency of the newly synthesized ZrO₂/Fe₃O₄ nanoparticles was investigated in the rapid removal of selected pollutants under various experimental conditions. Nevertheless, the influence of the water matrix on photocatalytic degradation was also examined. The obtained data showed that using ZrO₂/Fe₃O₄ nanosystems, an appropriate removal rate of the selected pesticides and pharmaceuticals can be reached after 120 min of solar irradiation. Further, the total organic carbon measurements proved the mineralization of the target emerging pollutants. ZrO₂/Fe₃O₄ nanoparticles are economically feasible, as their removal from the suspension can be easily achieved using affordable, environmentally-friendly magnetic separation.

Hydrogeochemical characterization based water resources vulnerability assessment in India's first Ramsar site of Chilka lake

A limnological site is significantly characterized by rich biological, chemical, and physical properties of the environment and is also described as the epitome of a large aquatic ecosystem. During the last few decades, the Chilka lake Ramsar site has experienced substantial degradation of water quality with associated deterioration of aquatic biodiversity. Our study aims to quantify the VWRM of the Chilka lake Ramsar region using the most reliable MLAs, namely ANN and RF, with the help of seventeen hydro-chemical properties of lake water. The produced map is validated through six validating measures (ROC-AUC- 0.89, Sensitivity-0.90, Specificity-0.78, PPV-0.78, NPV-0.88, Taylor diagram (r)-0.94), which depict that ANN is the most reliable ML algorithm in assessing the VWRM of the concerned region followed by RF. The prepared map of our study revealed that the eastern part was remarkably high to very high vulnerable zone covered area with 22.41 % and 7.19 %, respectively.

Occurrence and Distribution of Antibiotics in the Water, Sediment, and Biota of Freshwater and Marine Environments: A Review

Antibiotics, as pollutants of emerging concern, can enter marine environments, rivers, and lakes and endanger ecology and human health. The purpose of this study was to review the studies conducted on the presence of antibiotics in water, sediments, and organisms in aquatic environments (i.e., seas, rivers, and lakes). Most of the reviewed studies were conducted in 2018 (15%) and 2014 (11%). Antibiotics were reported in aqueous media at a concentration of <1 ng/L−100 μg/L. The results showed that the highest number of works were conducted in the Asian continent (seas: 74%, rivers: 78%, lakes: 87%, living organisms: 100%). The highest concentration of antibiotics in water and sea sediments, with a frequency of 49%, was related to fluoroquinolones. According to the results, the highest amounts of antibiotics in water and sediment were reported as 460 ng/L and 406 ng/g, respectively. In rivers, sulfonamides had the highest abundance (30%). Fluoroquinolones (with an abundance of 34%) had the highest concentration in lakes. Moreover, the highest concentration of fluoroquinolones in living organisms was reported at 68,000 ng/g, with a frequency of 39%. According to the obtained results, it can be concluded that sulfonamides and fluoroquinolones are among the most dangerous antibiotics due to their high concentrations in the environment. This review provides timely information regarding the presence of antibiotics in different aquatic environments, which can be helpful for estimating ecological risks, contamination levels, and their management.

A comprehensive review of various approaches for treatment of tertiary wastewater with emerging contaminants: what do we know?

In the last few decades, environmental contaminants (ECs) have been introduced into the environment at an alarming rate. There is a risk to human health and aquatic ecosystems from trace levels of emerging contaminants, including hospital wastewater (HPWW), cosmetics, personal care products, endocrine system disruptors, and their transformation products. Despite the fact that these pollutants have been introduced or detected relatively recently, information about their characteristics, actions, and impacts is limited, as are the technologies to eliminate them efficiently. A wastewater recycling system is capable of providing irrigation water for crops and municipal sewage treatment, so removing ECs before wastewater reuse is essential. Water treatment processes containing advanced ions of biotic origin and ECs of biotic origin are highly recommended for contaminants. This study introduces the fundamentals of the treatment of tertiary wastewater, including membranes, filtration, UV (ultraviolet) irradiation, ozonation, chlorination, advanced oxidation processes, activated carbon (AC), and algae. Next, a detailed description of recent developments and innovations in each component of the emerging contaminant removal process is provided.

An experimental laboratory reactor for quantitative kinetic studies of disinfection byproduct formation using membrane inlet mass spectrometry

RATIONALE

The type and quantity of environmentally problematic disinfection byproducts (DBPs) produced during chlorination of water depend on the natural organic matter and organic contaminants that raw water contains, and on the operational conditions of the drinking water treatment process. There is a need for a fast and quantitative method that determines which DBPs are produced and monitors the chemical dynamics during a drinking water treatment.

METHODS

A small experimental chemical reactor (50 mL) was mounted directly onto the membrane inlet interface of a membrane inlet mass spectrometer (MIMS). In this setup, the membrane was the only separation between the reaction mixture in the chemical reactor and the open ion source of the mass spectrometer 2 cm away. Water samples to be chlorinated were placed in the reactor and the chlorination reaction was initiated by injection of hypochlorite. The formation of intermediates and products was monitored using either full-scan mass spectra or selected ion monitoring of relevant ions.

RESULTS

An algorithm for analyte quantification was successfully developed for analysis of the complex mixtures of phenol (a model for waterborne organic compounds), chlorinated intermediates and trihalomethane products which simultaneously pass the membrane into the mass spectrometer. The algorithm is based upon the combined use of standard addition and an internal standard, and all analytes could be quantified at nanomolar concentrations corresponding to realistic water treatment conditions. Experiments carried out in the temperature range 15-60°C showed that the reaction dynamics change with operational parameters, for example in tap versus deionized water.

CONCLUSIONS

We have successfully shown that an experimental laboratory reactor directly interfaced with a MIMS can be used for quantitative monitoring of the chemical dynamics during a water treatment. This technique could provide rapid assistance in the optimization of operating parameters for minimizing DBP production.

Interactive effects of high temperature and pesticide exposure on oxidative status, apoptosis, and renin expression in kidney of goldfish: Molecular and cellular mechanisms of widespread kidney damage and renin attenuation

One of many noteworthy consequences of increasing societal reliance on pesticides is their predominance in aquatic environments. These pernicious chemicals interact with high temperatures from global climate change, heat waves, and natural variations to create unstable environments that negatively impact organisms' health. To understand these conditions, we examined the dose-dependent effects of environmentally relevant pesticide mixtures (metolachlor, linuron, isoproturon, tebuconazole, aclonifen, atrazine, pendimethalin, and azinphos-methyl) combined with elevated temperatures (22 control vs. 32°C for 4-week exposure) on renin, dinitrophenyl protein (DNP, an indicator of reactive oxygen species, ROS), 3-nitrotyrosine protein (NTP, an indicator of reactive nitrogen species, RNS), superoxidase dismutase (SOD, an antioxidant), and catalase (CAT, an antioxidant) expressions in the kidneys of goldfish (Carassius auratus). Histopathological analysis showed widespread damage to kidney tissues in high temperature and pesticide co-exposure groups, including rupture of the epithelial layer, hemorrhaging, and degeneration of tubular epithelium. Quantitative real-time polymerase chain reaction (qRT-PCR) and immunohistochemical analyses demonstrated significant declines in renin receptor-like mRNA and protein expressions in kidney tissues under combined exposure to high temperature and pesticides compared with controls; conversely, expression of DNP, NTP, SOD, and CAT increased in kidney tissues under the same conditions. Apoptotic cells were also increased in co-exposure groups as assessed by in situ terminal deoxynucleotidyl transferase dUTP nick labeling (TUNEL) assay. The enhanced apoptosis in kidneys of heat and pesticides co-exposed fish was associated with increased caspase-3 (a protease enzyme) mRNA levels. Our results demonstrated that high temperature and pesticides induced oxidative/nitrative stress (i.e., ROS/RNS), damaged tissues, increased cellular apoptosis, and suppressed renin expression in kidneys of goldfish.

DFT insights into the degradation mechanism of carbendazim by hydroxyl radicals in aqueous solution

Advanced oxidation of carbendazim by OH radicals is a central step in its wastewater remediation. However, the understanding of the degradation mechanism of carbendazim has always been a challenge. In this paper, the degradation mechanism of carbendazim by •OH in aqueous solution has been explored using density functional theory (DFT) calculations. On account of the structural and electronic characteristics analysis, the nucleophilic aromatic substitution, dehydrogenation oxidation, and decarboxylation degradation pathways were mainly investigated. These degradation reactions may produce hydroxyl substitution products, oxidized aldehyde and carboxyl products, and decarboxylated carbamic acid products. Computational studies demonstrated that these possible degradation reactions are facile to take place kinetically and have large thermodynamic driving forces, indicating the feasibility of the relevant degradation pathways. Additionally, the ecological risk of carbendazim and its possible degradation products was evaluated, showing that the acute toxicity of degradation products decreases in varying degrees compared with that of carbendazim. The comprehensive mechanistic studies open an avenue for the understanding on the degradation of organic pollutants such as benzimidazole pollutants on molecular level.

Characteristics and growth kinetics of biomass of Citrobacter freundii strains PYI-2 and Citrobacter portucalensis strain YPI-2 during the biodegradation of Ibuprofen

Ibuprofen (IBU) is the third most commonly used analgesic drug in the world. It enters the water system as a result of human excretion-based wastewater discharges. Hence, it attracts the attention of environmentalists for its ecological fate and degradation behavior. In this study, the two IBU degrading bacterial strains, Citrobacter freundii strain PYI-2 (MT039504) and Citrobacter portucalensis strain YPI-2 (MN744335), were isolated from industrial wastewater samples using an enrichment culture method, identified, and characterized. Physiological and batch culture degradation studies have indicated that these strains involved in IBU degradation and the intermediates produced during the process were analyzed. These strains degrade IBU in the batch culture. The optimum pH was reported for degradation of the PYI2 strain (6.9) and YPI2 strain (5.8), and the optimum temperatures were 42°C and 32°C, respectively. Biomass kinetic analysis of these strains was performed based on physical parameters (temperature, pH, and rpm) and confirmed by the experimental study. As indicated in the GC-MS chromatogram peaks, viz., hydroxyibuprofen, 2-(4-hydroxyphenylpropionic acid), 1,4-hydroquinone, and 2-hydroxy-1,4-quinol various intermediates compounds of degradation pathway were observed. Finally, through the GC-MS data, the metabolic pathway for degradation was predicted. In the study, it was confirmed that Citrobacter freundii strain PYI-2 and Citrobacter portucalensis strain YPI-2 exhibit metabolic potential for the biodegradation of IBU and can be further deployed in bioremediation.

Suspected-screening assessment of the occurrence of organic compounds in sewage sludge

The profiling of emerging organic pollutants present in sludge and generated during wastewater treatment is much more limited than in water. This is mainly due to the difficulty of sludge analysis because of its high content of organic matter and interfering compounds. In this study, a generic extraction method using a mixture of buffered water (pH 4.1) and solid phase extraction (SPE) clean-up was applied to samples of sludge obtained in different treatment plants. This extraction was followed by determination of the contaminants by ultra-high performance liquid chromatography coupled to high resolution mass spectrometry (UHPLC-HRMS), using suspected screening to detect the most relevant organic compounds that access the environment through sludge application. This screening (including >3000 substances, such as, pharmaceuticals, pesticides, metabolites and industrial chemicals) tentatively identified 122 compound and assigned most probable structure to 39. The set of compounds assigned to a probable structure was increased in 14 compounds by searching in a free database of metabolites. Fifteen compounds were unequivocally confirmed against the analytical standard. Pharmaceuticals and personal care products (PPCPs), with 31 substances identified and 8 confirmed were the main group of compounds. Compounds frequently detected in all sludge samples include nucleotides such as adenosine triphosphate, amino acids such as phenylalanine, or peptides such as leu-phe. Altogether, the results of this work highlight the interest of HRMS to draw the profile of organic compounds in complex matrices.

MXene-based hybrid composites as photocatalyst for the mitigation of pharmaceuticals

Environmental contamination is a burning issue and has gained global attention in the present era. Pharmaceuticals are emerging contaminants affecting the natural environment worldwide owing to their extensive consumption particularly in developing countries where self-medication is a common practice. These pharmaceuticals or their degraded active metabolites enter water bodies via different channels and are continuous threat to the whole ecological system. There is a dire need to find efficient approaches for their removal from all environmental matrices. Photocatalysis is one of the most effective and simple approach, however, finding a suitable photocatalyst is a challenging task. Recently, MXenes (two-dimensional transition metal carbides/nitrides), a relatively new material has attracted increasing interest as photocatalysts due to their exceptional properties, such as large surface area, appreciable safety, huge interlayer spacing, thermal conductivity, and environmental flexibility. This review describes the recent advancements of MXene-based composites and their photocatalytic potential for the elimination of pharmaceuticals. Furthermore, present limitations and future research requirements are recommended to attain more benefits of MXene-based composites for the purification of wastewater.

Preparation of amino-modified cellulose aerogels and adsorption on typical diclofenac sodium contaminant

A new functional cellulose aerogel (Cell@PEI) with high adsorption efficiency was prepared for the removal of diclofenac sodium (DCF) by ammonification cross-linked polyethyleneimine (PEI) with the surface of cellulose. The fabricated Cell@PEI adsorbent was characterized using field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), X-ray photoelectron spectroscopy (XPS), etc. The results demonstrated that the Cell@PEI exhibited a distinct three-dimensional cell structure and was rich in functional groups, i.e., -OH, C = O, -NH₂, and C = C. The Cell@PEI presented a stable crystal structure and large specific surface area (241.41 m²·g^-1), which was approximately 42 times as much as bare cellulose aerogel (5.82 m²·g^-1). In addition, a series of adsorption experiments showed that the adsorbent had good adsorption performance for DCF with a maximum adsorption capacity of 294.12 mg·g^-1. Furthermore, the adsorption of DCF on Cell@PEI was well corresponded with the Langmuir isotherm and pseudo-second-order adsorption model. Thermodynamic study proved that adsorption was a spontaneous exothermic reaction. Moreover, the introduction of PEI into Cell@PEI aerogel enhanced the electrostatic interaction and hydrogen bonding, promoting DCF adsorption. Importantly, the Cell@PEI aerogel could be reused up to five times desorbed by NaOH (0.5 mol/L). Considering the above results, the fabricated aerogel material can be applied to remove organic pollutants.

Line ferries and cargo ships for the monitoring of marine contaminants of emerging concern: Application along a Europe-Arctic transect

Contaminants of emerging concern (CEC) are a focus in marine protection. Several CECs are released with wastewater effluents to coastal environments and their offshore occurrence has been recently documented. Routine monitoring is key for implementing marine protection acts, however infrastructural, financial, and technical limitations hinder this task along broad spatial transects. Here we show the efficacy of a new infrastructure enabling unmanned sampling of surface water from ships of opportunity in providing reliable and cost-effective routine monitoring of CECs along a Europe-Arctic transect. The distribution and long-range transport of several pharmaceuticals and personal care products, artificial food additives, and stimulants were assessed. Validation of operations through strict procedural and analytical quality criteria is presented. A framework to estimate a compound-specific spatial range (SR) index of marine long-range transport based on monitoring results and information on source spatial distribution, is introduced. Estimated SR values ranged 50-350 km depending on compound, yielding a ranking of long-range transport potential which reflected expectations based on degradation half-lives. SR values were used to calculate prior maps of detection probability that can be used to plan future routine monitoring in the region.

Pharmaceuticals, hormones, plasticizers, and pesticides in drinking water

Humans are exposed to endocrine disrupting compounds (EDCs) in tap water via drinking water. Currently, most of the analytical methods used to assess a long list of EDCs in drinking water have been made available only for a single group of EDCs and their metabolites, in contrast with other environmental matrices (e.g., surface water, sediments, and biota) for which more robust methods have been developed that allow detection of multiple groups. This study reveals an analytical method of one-step solid phase extraction, incorporated together with liquid chromatography-tandem mass spectrometry for the quantification of multiclass EDCs (i.e., pharmaceuticals, hormones, plasticizers, and pesticides) in drinking water. Fifteen multiclass EDCs significantly varied in amount between field samples (p < 0.05), with a maximum concentration of 17.63 ng/L observed. Daily exposure via drinking water is unlikely to pose a health risk (risk quotient < 1). This method serves as an analytical protocol for tracing multiclass EDC contamination in tap water as part of a multibarrier approach to ensure safe drinking water for good health and well-being. It represents a simpler one-step alternative tool for drinking water analysis, thereby avoiding the time-consuming and expensive multi-extraction steps that are generally needed for analyzing multiclass EDCs.

Ocean Acidification, but Not Environmental Contaminants, Affects Fertilization Success and Sperm Motility in the Sea Urchin Paracentrotus lividus

Ocean acidification poses an increasing concern for broadcast spawning species that release gametes in the water column where fertilization occurs. Indeed, the functionality of gametes and their interactions may be negatively affected by reduced pH. Susceptibility to other environmental stressors, such as pollutants, may be also altered under acidified conditions, resulting in more detrimental effects. To verify this hypothesis, combined exposures to CO2-driven acidification and environmentally relevant concentrations (0.5 µg/L) of three contaminants (caffeine, diclofenac, and PFOS, all singularly or in mixture) were carried out to highlight potential negative effects on fertilization success and motility of sperm in the sea urchin Paracentrotus lividus. Our results showed a significant reduction in the percentage of fertilized eggs when sperm were pre-exposed to reduced pH (ambient pH minus 0.4 units) compared to that of controls (ambient, pH = 8.1). Sperm speed and motility also decreased when sperm were activated and then exposed at reduced pH. Conversely, at both pH values tested, no significant effect due to the contaminants, nor of their interaction with pH, was found on any of the biological endpoints considered.

Spatiotemporal distribution, source apportionment and risk assessment of typical hormones and phenolic endocrine disrupting chemicals in environmental and biological samples from the mariculture areas in the Pearl River Delta, China

The present work studied the levels, distribution, potential sources, ecological and human health risks of typical hormones and phenolic endocrine disrupting chemicals (EDCs) in the mariculture areas of the Pearl River Delta (PRD), China. The environmental levels of 11 hormones (6 estrogens, 4 progestogens, and 1 androgen) and 2 phenolic EDCs were quantified in various matrices including water, sediment, cultured fish and shellfish. Ultrahigh performance liquid chromatography-triple quadrupole tandem mass spectrometry analyses showed that all the 13 target compounds were detected in biotic samples, whereas 10 were detected in water and sediment, respectively. The total concentrations ranged from 35.06-364.53 ng/L in water and 6.31-29.30 ng/g in sediment, respectively. The average contaminant levels in shellfish (Ostrea gigas, Mytilus edulis and Mimachlamys nobilis) were significantly higher than those in fish (Culter alburnus, Ephippus orbis and Ephippus orbis). Source apportionment revealed that the pollution of hormones and phenolic EDCs in PRD mariculture areas was resulted from the combination of coastal anthropogenic discharges and mariculture activities. The hazard quotient values of the contaminants were all less than 1, implying no immediate human health risk. Overall, the present study is of great significance for scientific mariculture management, land-based pollution control, ecosystem protection, and safeguarding human health.

Which Micropollutants in Water Environments Deserve More Attention Globally?

Increasing chemical pollution of aquatic environments is a growing concern with global relevance. A large number of organic chemicals are termed as "micropollutants" due to their low concentrations, and long-term exposure to micropollutants may pose considerable risks to aquatic organisms and human health. In recent decades, numerous treatment methods and technologies have been proposed to remove micropollutants in water, and typically several micropollutants were chosen as target pollutants to evaluate removal efficiencies. However, it is often unclear whether their toxicity and occurrence levels and frequencies enable them to contribute significantly to the overall chemical pollution in global aquatic environments. This review intends to answer an important lingering question: Which micropollutants or class of micropollutants deserve more attention globally and should be removed with higher priority? Different risk-based prioritization approaches were used to address this question. The risk quotient (RQ) method was found to be a feasible approach to prioritize micropollutants in a large scale due to its relatively simple assessment procedure and extensive use. A total of 83 prioritization case studies using the RQ method in the past decade were compiled, and 473 compounds that were selected by screening 3466 compounds of three broad classes (pharmaceuticals and personal care products (PPCPs), pesticides, and industrial chemicals) were found to have risks (RQ > 0.01). To determine the micropollutants of global importance, we propose an overall risk surrogate, that is, the weighted average risk quotient (WARQ). The WARQ integrates the risk intensity and frequency of micropollutants in global aquatic environments to achieve a more comprehensive priority determination. Through metadata analysis, we recommend a ranked list of 53 micropollutants, including 36 PPCPs (e.g., sulfamethoxazole and ibuprofen), seven pesticides (e.g., heptachlor and diazinon), and 10 industrial chemicals (e.g., perfluorooctanesulfonic acid and 4-nonylphenol) for risk management and remediation efforts. One caveat is that the ranked list of global importance does not consider transformation products of micropollutants (including disinfection byproducts) and new forms of pollutants (including antibiotic resistance genes and microplastics), and this list of global importance may not be directly applicable to a specific region or country. Also, it needs mentioning that there might be no best answer toward this question, and hopefully this review can act as a small step toward a better answer.

The efficient removal of diclofenac sodium and bromocresol green from aqueous solution by sea urchin-like Ni/Co-BTC bimetallic organic framework: adsorption isotherms, kinetics and mechanism

A novel adsorbent based on nanostructured Ni/Co-BTC bimetallic organic framework (namely Ni/Co-BTC MOF) was successfully prepared by a simple solvothermal method. Adsorption experiments showed that the optimal molar ratio of...

Occurrence of Pharmaceutical and Pesticide Transformation Products in Freshwater: Update on Environmental Levels, Toxicological Information and Future Challenges

Pharmaceuticals and pesticides are recognized micropollutants in freshwater systems. Their ever-increasing frequency of detection, levels found and little information available about their effects on non-target organisms, make them emerging contaminants. However, parental compounds are not the only substances of concern. Their metabolites and degradation products, hereby referred to as transformation products, are increasingly detected in freshwater samples and wastewater effluents. In the past years, a wealth of publications provided concentration levels detected in freshwater and some toxicological data, which required critical systematization. This review identified concentrations for 190 transformation products (92 from pesticides and 98 from pharmaceuticals) in water bodies and wastewater effluents. A concentration heatmap was produced to easily spot the substances found at higher levels and plan future research. The very limited available toxicological data link exposure to transformation products to adverse outcomes in humans (genotoxicity and alteration in detoxification processes) and aquatic species (mostly related to apical endpoints). Overall, environmental levels of these transformation products may pose a severe threat to aquatic organisms and need to be further investigated in sound experimental designs, testing for the effects of the single substances as well as of their mixtures. Such toxicological information is highly needed to improve both water treatment technologies and monitoring programmes.

Bi-functional water-purification materials derived from natural wood modified TiO2 by photothermal effect and photocatalysis

As one of the sustainable and renewable materials, the carbonization of natural wood is generally considered as a low-cost, environmentally friendly method to fabricate carbon materials. Natural wood, by surficial carbonization, can possess an excellent photothermal effect, low heat loss, and easy water transportation in the solar water desalination process based on the unique structures, leading to high solar water desalination performance. Here, we design and construct a composite of commercial P25 nanocrystal-loaded semi-spherical wood with surficial carbonization at the semi-spherical end (P25/wC-s-s), which is beneficial for light harvesting and water evaporation due to the semi-spherical structure-induced large surface area. The composite displays bi-functions of high solar-to-vapour energy efficiency and an intriguing photo-degradation efficiency for organic pollutants in the solar water purification process. The research provides a novel approach to engineering an efficient, stable, and low-cost bi-functional device for the photothermal/photoelectronic conversion of water treatment.

A bifunctional water-purification material is designed by surficial carbonization of the semi-spherical end of a natural wood block and loading of P25 on the lateral surfaces of wood domains.

Clearance of methylene blue by CdS enhanced composite hydrogel materials

Hydrogel material is considered to be one of the effective adsorbents widely used to remove organic pollutants. However, the poor mechanical properties of some hydrogels limit their applications. Herein, we prepared composite hydrogels, for which acrylic acid (AA) and acrylamide (AM) were cross-linked and polymerised as the main substrate with adsorption function, while CdS nanoparticles were mainly used as reinforced material. Scanning electron microscope (SEM), Fourier transform infrared spectrometer (FTIR), two-dimensional infrared vibrational echo spectroscopy (2D-IR), and thermal gravimetric analyzer (TGA) were used to determine the physical and chemical structures of the hydrogels. The effects of the composition of AA, AM, and CdS on the mechanical properties and adsorption behaviours of the hydrogels were investigated. Besides, based on the great potential photocatalytic application value for wastewater remediation under the sunlight of CdS, the influence of the CdS doping amount on the photocatalytic property was also studied. As a result, when the mass ratio of AA to AM was 5:5, the hydrogel showed the best mechanical properties, and along with increasing the amount of CdS, the mechanical strength of the hydrogel was significantly enhanced from 0.445 MPa to 1.014 MPa. Besides, the composite hydrogels showed high adsorption and photocatalytic degradation synergistic clearance effect on methylene blue. Thus, the introduction of CdS photocatalytic nanoparticles may be an efficient and economical approach towards bifunctional hydrogel materials with enhanced mechanical property and photocatalytic degradation for wastewater remediation.

Modification of cyclodextrin and use in environmental applications

Water pollution, which has become a global problem in parallel with environmental pollution, is a problem that needs to be solved urgently, considering the gradual depletion of water resources. The inadequacy of the water treatment methods and the materials used somehow directed the researchers to look for dual character structures such as biocompatible and biodegradable β-cyclodextrin (β-CD). β-CD, which is normally insoluble in water, is used in demanding wastewater applications by being modified with the help of different agents to be water soluble or transformed into polymeric adsorbents as a result of co-polymerization via cross-linkers. In this way, in addition to the host-guest interactions offered by β-CD, secondary forces arising from these interactions provide advantages in terms of regeneration and reusability. However, the adsorption efficiency and synthesis steps need to be improved. Based on the current studies presented in this review, in which cross-linkers and modification methods are also mentioned, suggestions for novel synthesis methods of new-generation β-CD-based materials, criticisms, and recent methods of removal of micropollutants such as heavy metals, industrial dyes, harmful biomolecules, and pharmaceutics wastes are mentioned.

Data Analytics Determines Co-occurrence of Odorants in Raw Water and Evaluates Drinking Water Treatment Removal Strategies

A complex dataset with 140 sampling events was generated using triple quadrupole gas chromatography-mass spectrometer to track the occurrence of 95 odorants in raw and finished water from 98 drinking water treatment plants in 31 cities across China. Data analysis identified more than 70 odorants with concentrations ranging from not detected to thousands of ng/L. In raw water, Pearson correlation analysis determined that thioethers, non-oxygen benzene-containing compounds, and pyrazines were classes of chemicals that co-occurred, and geosmin and p(m)-cresol, as well as cyclohexanone and benzaldehyde, also co-occurred, indicating similar natural or industrial sources. Based on classification and regression tree analysis, total dissolved organic carbon and geographical location were identified as major factors affecting the occurrence of thioethers. Indoles, phenols, and thioethers were well-removed through conventional and advanced treatment processes, while some aldehydes could be generated. For other odorants, higher removal was achieved by ozonation-biological activated carbon (39.3%) compared to the conventional treatment process (14.5%). To our knowledge, this is the first study to systematically identify the major odorants in raw water and determine suitable treatment strategies to control their occurrence by applying data analytics and statistical methods to the complex dataset. These provide informative reference for odor control and water quality management in drinking water industry.