Biodegradation of nonylphenol during aerobic composting of sewage sludge under two intermittent aeration treatments in a full-scale plant

The unexpected effect of the compound microbial agent NP-M2 on microbial community dynamics in a nonylphenol-contaminated soil: the self-stability of soil ecosystem

Background

Nonylphenol (NP) is widely recognized as a crucial environmental endocrine-disrupting chemical and persistent toxic substance. The remediation of NP-contaminated sites primarily relies on biological degradation. Compound microbial products, as opposed to pure strains, possess a greater variety of metabolic pathways and can thrive in a wider range of environmental conditions. This characteristic is believed to facilitate the synergistic degradation of pollutants. Limited research has been conducted to thoroughly examine the potential compatibility of compound microbial agents with indigenous microflora, their ability to function effectively in practical environments, their capacity to enhance the dissipation of NP, and their potential to improve soil physicochemical and biological characteristics.

Methods

In order to efficiently eliminate NP in contaminated soil in an eco-friendly manner, a simulation study was conducted to investigate the impact of bioaugmentation using the functional compound microbial agent NP-M2 at varying concentrations (50 and 200 mg/L) on the dynamics of the soil microbial community. The treatments were set as follows: sterilized soil with 50 mg/kg NP (CK50) or 200 mg/kg NP (CK200); non-sterilized soil with 50 mg/kg NP (TU50) or 200 mg/kg NP (TU200); non-sterilized soil with the compound microbial agent NP-M2 at 50 mg/kg NP (J50) or 200 mg/kg NP (J200). Full-length 16S rRNA analysis was performed using the PacBio Sequel II platform.

Results

Both the indigenous microbes (TU50 and TU200 treatments) and the application of NP-M2 (J50 and J200 treatments) exhibited rapid NP removal, with removal rates ranging from 93% to 99%. The application of NP-M2 further accelerated the degradation rate of NP for a subtle lag period. Although the different treatments had minimal impacts on the soil bacterial α-diversity, they significantly altered the β-diversity and composition of the bacterial community. The dominant phyla were Proteobacteria (35.54%-44.14%), Acidobacteria (13.55%-17.07%), Planctomycetes (10.78%-11.42%), Bacteroidetes (5.60%-10.74%), and Actinobacteria (6.44%-8.68%). The core species were Luteitalea_pratensis, Pyrinomonas_methylaliphatogenes, Fimbriiglobus_ruber, Longimicrobium_terrae, and Massilia_sp003590855. The bacterial community structure and taxon distribution in polluted soils were significantly influenced by the activities of soil catalase, sucrase, and polyphenol oxidase, which were identified as the major environmental factors. Notably, the concentration of NP and, to a lesser extent, the compound microbial agent NP-M2 were found to cause major shifts in the bacterial community. This study highlights the importance of conducting bioremediation experiments in conjunction with microbiome assessment to better understand the impact of bioaugmentation/biostimulation on the potential functions of complex microbial communities present in contaminated soils, which is essential for bioremediation success.

Removal of nonylphenol ethoxylate surfactant in batch reactors: emphasis on methanogenic potential and microbial community characterization under optimized conditions

ABSTRACTNonylphenol ethoxylate (NPE) is an endocrine-disrupting chemical that has bioaccumulative, persistent and toxic characteristics in different environmental matrices and is difficult to remove in sewage treatment plants. In this study, the effects of the initial concentration of NPE (0.2 ± 0.03 - 3.0 ± 0.02 mg. L-1) and ethanol (73.9 ± 5.0-218.6 ± 10.6 mg. L-1) were investigated using factorial design. Assays were carried out in anaerobic batch reactors, using the Zinder basal medium, yeast extract (200 mg. L-1), vitamin solution and sodium bicarbonate (10% v/v). The optimal conditions were 218.56 mg.L-1 of ethanol and 1596.51 µg.L-1 of NPE, with 92% and 88% of NPE and organic matter removal, respectively, and methane yield (1689.8 ± 59.6 mmol) after 450 h of operation. In this condition, bacteria potentially involved in the degradation of this surfactant were identified in greater relative abundance, such as Acetoanaerobium (1.68%), Smithella (1.52%), Aminivibrio (0.91%), Petrimonas (0.57%) and Enterobacter (0.47%), as well as archaea Methanobacterium and Methanoregula, mainly involved in hydrogenotrophic pathway.

Molecular insights into the chemodiversity of dissolved organic matter and its interactions with the microbial community in eco-engineered bauxite residue

Dissolved organic matter (DOM) plays an important role in the biogeochemical function development of bauxite residue. Nevertheless, the DOM composition at the molecular level and its interaction with microbial community during soil formation of bauxite residue driven by eco-engineering strategies are still relatively unknown. In the present study, the DOM composition at the molecular level and its interactions with the microbial community in amended and revegetated bauxite residue were explored. The results showed that the amendment applications and revegetation enhanced the accumulation of unsaturated molecules with high values of double bond equivalent (DBE) and nominal oxidation of carbon (NOSC) and aromatic compounds with high values of modified aromaticity index (AI_mod) as well as the reduction of average weighted molecular mass of DOM molecules. Significant correlations between DOM molecules and the microbial community and Fe/Al oxides were found. DOM molecules were decomposed by the microbial community and sequestered onto Fe/Al oxides, which were the main driving factors that changed DOM chemodiversity in the amended and revegetated bauxite residue. These findings are beneficial for understanding the biogeochemical behaviours of DOM and providing a critical basis for the development of eco-engineering strategies towards soil formation and the sustainable revegetation of bauxite residue.

Review of inventory data for the biological treatment of sewage sludge

The biological treatment of municipal sewage sludge, including anaerobic digestion and composting, was reviewed with the purpose of establishing inventory data to address all the inputs and outputs related to sludge treatment. We identified 193 scientific papers, resulting in 64 datasets on anaerobic digestion and 35 datasets on composting. For anaerobic digestion, biogas production varied significantly (up to a factor of four) depending on the sludge. A useful correlation was identified between the amount of methane produced and the degradation of volatile solids. According to statistical tests, no significant differences were found in biogas production for mesophilic and thermophilic digesters. In addition, methane content varied significantly, and very few data were available for digestate composition or for energy consumption and recovery. For composting, accurate estimates relating to the degradation of sewage sludge could not be made, since organic bulking materials were part of the final composted product. Data on emissions to air are currently scarce, which points to the need for more published information. The inventory data evaluated herein are useful in the feasibility assessment of the biological treatment of sewage sludge, for comparing technologies, for example in LCA studies and as a basis for evaluating the performance of a specific biological sludge treatment plant. However, a great deal of the reviewed data originated from laboratory and pilot-scale studies, and so there is a need for more complete datasets on the performance of full-scale technologies, in order to establish full inventories and identify differences in technologies and operational conditions.

Pyrolysis of Aesculus chinensis Bunge Leaves as for Extracted Bio-Oil Material

Biomass rapid pyrolysis technology is easy to implement in continuous production and industrial application, and has become one of the leading technologies in the field of world renewable energy development. Agricultural and forestry waste is an important resource of renewable energy in China. In general, abandoned leaves in forest areas cause serious waste of resources. Its utilization may help to settle the problems of energy deficiency and environment pollution. In this study, Aesculus chinensis Bunge leaves (A. Bunge) are used as the research object to study the pyrolysis and extract. The results showed that there are a lot of bioactive components in A. Bunge leaves extract, including acetamide, 5-hydroxymethylfurfural, R-limonene, d-mannose, and dihydroxyacetone. The active components of A. Bunge leaves supply scientific evidence for the exploration and exploitation of this plant. The pyrolysis products of A. Bunge leaves are rich in organic acids, aldehydes, and ketones, which means that A. Bunge leaves can be used as a crude material for the manufacturing of bio-oil or bio-fuel. The pyrolysis products include batilol, pregnenolone, benzoic acid, butyrolactone, and propanoic acid, which can be used in biological medicine, chemical crude materials, and industrial raw material reagents. Therefore, A. Bunge leaves can be used as a good crude material for bio-oil or biofuel production. Combining A. Bunge leaves and fast pyrolysis methods can effectively solve the problem of forestry and agricultural residues in the future.

Novel nonylphenol-degrading bacterial strains isolated from sewage sludge: Application in bioremediation of sludge

Nonylphenol (NP) is an anthropogenic pollutant frequently found in sewage sludge due to the insufficient degrading effectiveness of conventional WWTPs and has attracted attention as an endocrine disruptor. The aim of this study was to isolate specific NP-degrading bacteria from sewage sludge to be used in the degradation of this contaminant through bioaugmentation processes in aqueous solution and sewage sludge. Up to eight different bacterial strains were isolated, six of them not previously described as NP degraders. Bacillus safensis CN12 presented the best NP degradation in solution, and glucose used as an external carbon source increased its effect, reaching DT₅₀ degradation values (time to decline to half the initial concentration of the pollutant) of only 0.9 days and a complete degradation in <7 days. Four NP metabolites were identified throughout the biodegradation process, showing higher toxicity than the parent contaminant. In sewage sludge suspensions, the endogenous microbiota was capable of partially degrading NP, but a part remained adsorbed as bound residue. Bioaugmentation was used for the first time to remove NP from sewage sludge to obtain more environmentally friendly biosolids. However, B. safensis CN12 was not able to degrade NP due to its high adsorption on sludge, but the use of a cyclodextrin (HPBCD) as availability enhancer allowed us to extract NP and degrade it in solution. The addition of glucose as an external carbon source gave the best results since the metabolism of the sludge microbiota was activated, and HPBCD was able to remove NP from sewage sludge to the solution to be degraded by B. safensis CN12. These results indicate that B. safensis CN12 can be used to degrade NP in water and sewage sludge, but the method must be improved using consortia of B. safensis CN12 with other bacterial strains able to degrade the toxic metabolites produced.

Immobilization of Zn and Cu in Conditions of Reduced C/N Ratio during Sewage Sludge Composting Process

In this paper we present results of research on the transformation of chemical forms of two elements (Cu, Zn) that occurred at the highest concentration in sewage sludge being processed in a composting process. The factor that had impact on the direction of the observed transformation was the amount of straw added to the mix with sewage sludge at the batch preparation stage including elimination of an additional source of organic carbon (straw). The analysis of contents of Cu and Zn chemical forms was performed applying Tessiere’s methodology. It was ascertained that reduction of supplementation has positive impact on the allocation of tested elements in organic (IV) and residual (V) fractions with a simultaneous decrease of heavy metals mobile forms share in bioavailable fractions, mostly ion exchangeable (I) and carbonate (II). Using an artificial neural network (ANN), a tool was developed to classify composts based on Austrian standards taking into account only I ÷ IV fractions treated as a labile, potentially bioavailable, part of heavy metals bound in various chemical forms in compost. The independent variables that were predictors in the ANN model were the composting time, C/N, and total content of the given element (total Cu, Zn). The sensitivity coefficients for three applied predictors varied around 1, which proves their significant impact on the final result. Correctness of the predictions of the generated network featuring an MLP 3-5-3 structure for the test set was 100%.

New insight into the impact of moisture content and pH on dissolved organic matter and microbial dynamics during cattle manure composting

Composting is an effective way to treat agricultural waste, whereas inappropriate initial conditions could cause lower maturity and system instability. In this study, the dissolved organic matter dynamics and microbial community succession of cattle-manure composting were investigated under different initial moisture content (MC) and pH of raw material. The results indicated that the extended duration of thermophilic phase and the highest GI (germination index) value of final product were observed at matrix 60% MC and pH 8.5 (AT2 treatment). Microbial analysis showed that the succession of bacterial and fungal community was significantly influenced by total carbon (TN), pH and MC (P < 0.05). The relationship between microbial community and fluorescence regional integration (FRI) parameters demonstrated that Thermobifida (bacterial genus), Mycothermus and Thermomyces (fungal genera) were positively correlated with P_{V, n} (the integral aera of Region V). This study could provide a potential strategy for large-scale industrial application of compost.

Fate and biodegradation characteristics of triclocarban in wastewater treatment plants and sewage sludge composting processes and risk assessment after entering the ecological environment

Triclocarban (TCC) has a high detection frequency in soil, rivers, sediments, and organisms, and its ecological risks have attracted substantial attention. In this study, we analyzed the fate of TCC in four wastewater treatment plants (WWTPs) in Zhengzhou, China, the biodegradation characteristics during the composting process, and the ecological risks of TCC when entering different environmental compartments. The concentration of TCC in the influent was 731.1-812.4 ng/L. More than 53.4% of TCC was biodegraded during the wastewater treatment process, and less than 2.5% was retained in the effluent. TCC was effectively removed through microbial degradation and sewage sludge absorption, and there were only minor differences in the different wastewater treatment processes. It is worth noting that more than 38% of TCC was enriched in sewage sludge (1430.1-1663.8 ng/g). The corresponding biodegradation rates of TCC were 65.7% and 82.8% in sewage sludge after 17 days of composting treatment with sawdust and straw as bulking agents, respectively. The estimated results showed that effluent discharge into the city rivers was safe. Composting could effectively degrade TCC and decrease the ecological risk of TCC when applied to sewage sludge.

Occurrence and dissipation mechanism of organic pollutants during the composting of sewage sludge: A critical review

Sewage sludge contains various classes of organic pollutants, limiting its land application. Sludge composting can effectively remove some organic pollutants. This review summarizesrecent researches on concentration changes and dissipation of different organic pollutants including persistent organic pollutants during sludge composting, and discusses their dissipation pathways and the current understanding on dissipation mechanism. Some organic pollutants like PAHs and phthalates were removed mainly through biodegradation or mineralization, and their dissipation percentages were higher than those of PCDD/Fs and PCBs. Nevertheless, some recalcitrant organic pollutants could be sequestrated in organic fractions of sludge mixtures, and their levels and ARG abundance even increased after sludge composting in some studies, posing potential risks for land application. This review demonstrated that microbial community and their corresponding degradation for organic pollutants were influenced by different pollutants, bulking agents, composting methods and processes. Further research perspectives on removing organic pollutants during sludge composting were highlighted.

Preferential and efficient degradation of phenolic pollutants with cooperative hydrogen-bond interactions in photocatalytic process

Phenolic pollutants as highly toxic and hazardous organics are widely generated from industrial and domestic process. Phenolic pollutants with different hydroxyl position (catechol, resorcinol, hydroquinone, phenol) were preferentially and efficiently oxidized in photocatalytic process (PC) by designing boron-doped TiO₂ (B-TiO₂).The key role for enhancing the photocatalytic activity of B-TiO₂ was the formation of abundant Ti³⁺ species. The formation of Ti³⁺-O weakened the competitive adsorption of H₂O in aqueous solution and favored the formation of cooperative hydrogen bond on the surface of B-TiO₂, leading to enhanced adsorption of phenolic pollutants. The degradation rate constant of B-TiO₂ (k_B-TiO2) was regardless of the corresponding oxidation potential of phenolic pollutants. The k_B-TiO2 for catechol in photocatalytic process was as high as 3.46 min^-1, which was 18.2, 1.6 times higher than that of biodegradation and ozonation methods, respectively. Of note, the preferential removal mechanism of phenolic pollutants was elucidated by in-situ attenuated total reflectance (ATR)-IR and density functional theory calculation (DFT). The results were helpful for developing new preferential oxidation technologies in HO∙-mediated process for selectively removing low concentration but highly toxic pollutants.

Linking microbial community structure with molecular composition of dissolved organic matter during an industrial-scale composting

This study explored the interactions between dissolved organic matter (DOM) composition and microbial community structure during an industrial-scale composting by Fourier transform ion cyclotron resonance mass spectrometry and 16S rRNA sequencing analysis. The results revealed that DOM from matured compost contained primarily lignins/carboxylic-rich alicyclic molecules (73.6%), the higher double bond equivalent (5.97) and aromaticity index (0.18), indicating that the molecular composition of DOM had changed substantially. Drastic changes in microbial community structure were also observed along with the DOM transformation process of composting. Network analysis further indicated that Caldicoprobacter, Bacillus, and Dechloromonas were associated with the most DOM subcategories. Caldicoprobacter could degrade carbohydrates, Bacillus accelerated the humification by transforming N-containing compounds, and Dechloromonas could degrade polycyclic aromatic hydrocarbons distributed in low O/C. These findings are helpful for understanding the molecular mechanisms of DOM transformation and humification of sludge composting.

Effects of biochar on catalysis treatment of 4-nonylphenol in estuarine sediment and associated microbial community structure

The effect of pyrolysis temperature on the generation of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge biochar (SSB) and the removal of hazardous chemicals from esturine sediments by SSB and sodium percarbonate (SPC), exemplified by 4-nonylphenol (4-NP) were studied. SSB synthesized at 500 °C (SSB500) achieved the highest 4-NP degradation efficiency of 73%, at pH₀ 9.0 in 12 h of reaction time. The enhanced 4-NP degradation was attributed to the SSB500 activation activation of SPC that produced sufficient •OH and CO₃^-• due to electron-transfer interaction on the Fe-Mn redox pairs. The microbial community diversity and composition of the treated sediment were compared using high-throughput sequencing. Results showed SSB/SPC treatment increased the microbial diversity and richness in the sediments. Proteobacteria were the keystone phylum, while Thioalkalispira genera were responsible for 4-NP degradation in the SSB/SPC treatment. Over all, results revealed the change in the bacterial community during the environmental applications of SSB, which provided essential information for better understanding of the monitoring and improvement of sustainable sediment ecosystems.

Process type is the key driver of the fate of organic micropollutants during industrial scale treatment of organic wastes

Organic micropollutants (OMPs) such as polycyclic aromatic hydrocarbons, nonylphenols and pharmaceutical products are ubiquitous in organic wastes generated by most human activities. Those wastes are mainly recycled by land spreading, most often after treatments, such as liming, dewatering, composting or anaerobic digestion. It has been shown essentially at lab scales that biological treatments have an effect on the removal of some OMPs. However, less is known on the role of each step of industrial treatment lines combining physico-chemical and biological treatments on the OMP fate and removal. The present study focuses on the impact of waste treatment on the fate of 53 OMPs along 10 industrial treatment lines treating urban, agricultural wastes or mixtures. The combination of studying a diversity of organic wastes and of OMPs with different characteristics (solubility, ionic charges, hydrophobicity etc.), sampling in situ industrial sites, quantifying native OMP concentrations and looking at each step of complete treatment lines allows for a global and representative view of the OMP fate in the French organic waste treatment sector. Less studied wastes, i.e. territorial mixtures, revealed intermediate OMP contents and compositions, between urban and agricultural wastes. Dewatering and liming, usually dismissed, had a noticeable effect on concentrations. Anaerobic digestion and composting had significant effects on the removal of all pollutant families. Combination of processes enhanced most OMP dissipation. Here we showed for the first time that the process type rather than the waste origin affects dissipation of organic micropollutants. Such data could be used to build and validate dynamic models for the fate of OMPs on solid waste treatment plants.

Mechanistic insight to mycoremediation potential of a metal resistant fungal strain for removal of hazardous metals from multimetal pesticide matrix

Fungi have an exceptional capability to flourish in presence of heavy metals and pesticide. However, the mechanism of bioremediation of pesticide (lindane) and multimetal [mixture of cadmium (Cd), chromium (Cr), copper (Cu), nickel (Ni), lead (Pb), zinc (Zn)] by a fungus is little understood. In the present study, Aspergillus fumigatus, a filamentous fungus was found to accumulate heavy metals in the order [Zn(98%)>Pb(95%)>Cd(63%)>Cr(62%)>Ni(46%)>Cu(37%)] from a cocktail of 30 mg L^-1 multimetal and lindane (30 mg L^-1) in a composite media amended with 1% glucose. Particularly, Pb and Zn uptake was enhanced in presence of lindane. Remarkably, lindane was degraded to 1.92 ± 0.01 mg L^-1 in 72 h which is below the permissible limit value (2.0 mg L^-1) for the discharge of lindane into the aquatic bodies as prescribed by European Community legislation. The utilization of lindane as a cometabolite from the complex environment was evident by the phenomenal growth of the fungal pellet biomass (5.89 ± 0.03 g L^-1) at 72 h with cube root growth constant of fungus (0.0211 g^1/3 L^-1/3 h^-1) compared to the biomasses obtained in case of the biotic control as well as in presence of multimetal complex without lindane. The different analytical techniques revealed the various stress coping strategies adopted by A. fumigatus for multimetal uptake in the simultaneous presence of multimetal and pesticide. From the Transmission electron microscope coupled energy dispersive X-ray analysis (TEM-EDAX) results, uptake of the metals Cd, Cu and Pb in the cytoplasmic membrane and the accumulation of the metals Cr, Ni and Zn in the cytoplasm of the fungus were deduced. Fourier-transform infrared spectroscopy (FTIR) revealed involvement of carboxyl/amide group of fungal cell wall in metal chelation. Thus A. fumigatus exhibited biosorption and bioaccumulation as the mechanisms involved in detoxification of multimetals.

Perlite as the partial substitute for organic bulking agent during sewage sludge composting

Composting is an efficient and cost-effective technology for sewage sludge treatment, and bulking agents are essential in sewage sludge composting. In this study, perlite was chosen as inorganic bulking agent to partially substitute for the organic bulking agent. Variations in the temperature, bulk density, moisture content, pH, electrical conductivity, organic carbon, nitrogen, phosphorus and potassium were detected during sewage sludge composting. The treatment with a mass ratio of spent mushroom substrate to perlite at 3:1 exhibited the highest pile temperature and the best effect on reducing bulk density and moisture content. In addition, Fourier transform infrared spectra showed that perlite promotes the degradation of organic matter during the composting process, and the germination index showed that the compost from all treatments was safe for agricultural application. When the mass ratios of spent mushroom substrate and perlite at 3:1 and 2:2 were chosen as bulking agents, the sewage sludge compost product could be used to produce plant cultivation substrate, and economic benefits could be obtained from sewage sludge composting according to comprehensive cost analysis.

From Laboratory Tests to the Ecoremedial System: The Importance of Microorganisms in the Recovery of PPCPs-Disturbed Ecosystems

The presence of a wide variety of emerging pollutants in natural water resources is an important global water quality challenge. Pharmaceuticals and personal care products (PPCPs) are known as emerging contaminants, widely used by modern society. This objective ensures availability and sustainable management of water and sanitation for all, according to the 2030 Agenda. Wastewater treatment plants (WWTP) do not always mitigate the presence of these emerging contaminants in effluents discharged into the environment, although the removal efficiency of WWTP varies based on the techniques used. This main subject is framed within a broader environmental paradigm, such as the transition to a circular economy. The research and innovation within the WWTP will play a key role in improving the water resource management and its surrounding industrial and natural ecosystems. Even though bioremediation is a green technology, its integration into the bio-economy strategy, which improves the quality of the environment, is surprisingly rare if we compare to other corrective techniques (physical and chemical). This work carries out a bibliographic review, since the beginning of the 21st century, on the biological remediation of some PPCPs, focusing on organisms (or their by-products) used at the scale of laboratory or scale-up. PPCPs have been selected on the basics of their occurrence in water resources. The data reveal that, despite the advantages that are associated with bioremediation, it is not the first option in the case of the recovery of systems contaminated with PPCPs. The results also show that fungi and bacteria are the most frequently studied microorganisms, with the latter being more easily implanted in complex biotechnological systems (78% of bacterial manuscripts vs. 40% fungi). A total of 52 works has been published while using microalgae and only in 7% of them, these organisms were used on a large scale. Special emphasis is made on the advantages that are provided by biotechnological systems in series, as well as on the need for eco-toxicological control that is associated with any process of recovery of contaminated systems.

Preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH2PO4 and FeSO4

Composting is an effective method for treating sewage sludge. The aim of this work was to study preservation of nitrogen and sulfur and passivation of heavy metals during sewage sludge composting with KH₂PO₄ and FeSO₄. The results show the loss rate of N decreased by 27.5% while that of S was increased by 32.1% compared with the control treatment during composting when KH₂PO₄ and FeSO₄ were added. X-ray absorption near-edge structure spectra show that S was converted to a highly oxidizable state during sewage sludge composting with added KH₂PO₄. The mobility factors of Cu, Zn, and Pb after composting were found to decrease by 13.6%, 21.6%, and 3.8%, respectively, compared with those before composting when KH₂PO₄ was added. Adding these two materials to Cu and Zn inhibits Zn₃(PO₄)₂(H₂O)₄ and Cu₅(PO₄)₂(OH)₄ from transforming into more mobile forms, while adding these materials to Pb promotes Pb₃(PO₄)₂ formation.

Removal of triclosan during wastewater treatment process and sewage sludge composting-A case study in the middle reaches of the Yellow River

Triclosan (TCS) is widely used as an antibacterial disinfectant in personal care products, especially in rapidly-urbanizing countries, such as China. Almost all TCS enters wastewater treatment plants (WWTPs), but the fate of the TCS in the WWTPs is unclear. TCS may be present in sewage sludge or in effluent, and the discharge of TCS into an ecosystem can pose environmental risks. In the present study, influent, effluent, and sewage sludge were collected from four typical urban WWTPs, and the fate of TCS in the plants was investigated. The study was conducted in Zhengzhou, a city in the middle reaches of the Yellow River in China. The sewage sludge was used for aerobic composting to study the influences of different ventilation treatments on the biodegradation effects of TCS and the changes in the microbial community during the composting process. The results showed that the mean concentration of TCS in the influent of the four typical WWTPs was 397.1 ng/L. The mean level of TCS in the effluent was 8.0 ng/L. The mean concentration of TCS in the sewage sludge was 814.4 ng/g. For the four WWTPs, the percentages of TCS removal were 97.6% (Nansanhuan), 97.6% (Xinzheng), 98.8% (Wulongkou), and 97.9% (Chenyu), respectively. The sewage sludge enrichment rates for TCS ranged between 36.4% and 49%. Therefore, there is a need to focus on the environmental risks from sewage sludge. During aerobic composting, the TCS was effectively degraded under three ventilation strategies. Thus, improved ventilation could enhance the degradation rate of TCS. Moreover, TCS degradation occurred in the mesophilic period and in the early stage of the thermophilic phase period. Finally, the degradation rates of TCS in sewage sludge samples composted with low-, medium-, and high-ventilation treatments were 48.1%, 59.0%, and 59.5%, respectively. Thus, high ventilation could provide enough oxygen for the pile and enhanced microorganism activity, benefiting the degradation of TCS. In addition, the microbial communities change during the composting process, and a diversity index of the changes can help explain the composting process.

Dissipation of polycyclic aromatic hydrocarbons (PAHs) in soil amended with sewage sludge and sludge compost

In this study, greenhouse experiments were conducted under the condition of different amendment ratios and planting tall fescue (Festuca arundinacea). The amendment ratios of sewage sludge or sludge compost to soil were of 0, 10, 25, and 50% (w/w). The removal rates of PAH, catalase, and dehydrogenase activities of amended soil and accumulation of PAHs by vegetation were detected to investigate the differences of PAH dissipation in sludge-amended and compost-amended soils. The initial PAH concentrations in three amended soils increased with the more addition of sludge or compost. After 126-day experiment, maximum PAH removal rates were observed in sludge-amended and compost-amended soils with PAH concentration of about 200 μg kg^-1. And the removal of PAHs showed better efficiencies in compost soil rather than in sludge soil. The more catalase activity and dehydrogenase activity of soil were obtained, respectively, in sludge soil and compost soil. The results indicated that the mechanism of PAH dissipation in two types of amended soils were different. The abundant amount of microorganism dominated PAH dissipation in sludge soils, and PAHs dissipated mainly caused of intense activity of microorganism in compost soils. In addition, PAH accumulation in tall fescue suggested that the transference approach of PAHs was from soil to the roots, and then accumulated in the shoots of tall fescue. It was prone to store up more PAHs in vegetation in the condition of high molar weight of PAHs, more biomass of vegetation, and heavy PAH concentration in soil.

Biosolids and sludge management

The advancements in the field of sludge and biosolids have been made over the past year. This review outlines the major contributions of researchers that have been published in peer-reviewed journals and conference proceedings throughout 2018. The review is organized in sections including regulatory developments and market analysis; analysis and quantification of characteristics including microconstituents and metals; treatment advances for the conversion of sludge to biosolids including pretreatment and sludge minimization, conditioning and dewatering, digestion, composting, and innovative technologies; product development and reuse including adsorbents and thermal products, agricultural and other uses, and innovative uses; odor and air emissions; and energy factors. PRACTITIONER POINTS: Summary of advances in the field of residuals and biosolids research in 2018. This review outlines the major contributions of researchers that have been published in peer-reviewed journals and conference proceedings. Topics covered range from regulation to innovation.

Biodegradation of volatile solids and water mass balance of bio-drying sewage sludge after electro-dewatering pretreatment

Using pressurized electro-osmotic dewatering (PEOD) as the pretreatment process for sewage sludge (SS) bio-drying can improve the dewatering performance, but the kinetics of volatile solids biodegradation and the water mass balance are still unknown. These processes were first investigated in this study. Experiments were conducted with three different initial materials, which were composed of SS, bio-dried product and SS dewatered by PEOD (EDSS) as different mass ratios. Six kinetic models and a nonlinear regression method were used to estimate the kinetic parameters, and the models were analyzed using four statistical indicators. Satisfactory fitting of the proposed kinetic model to the experimental data was achieved. Through the water mass balance, the results showed that EDSS had the best dewatering performance for bio-drying. EDSS provided the most appropriate conditions for the bio-drying process; the highest correlation coefficient was 0.9291 and the total water removal rate was 51.13% in the bio-drying of all EDSS.

4-n-nonylphenol degradation by the genus Metarhizium with cytochrome P450 involvement

In this study, the ability of 4-n-nonylphenol (4-n-NP) elimination by fungal species belonging to the genus Metarhizium was investigated. The occurrence of 35 metabolites from 4-n-NP degradation was confirmed. For the first time, based on the obtained results, the 4-n-NP biodegradation pathway distinctive for the genus Metarhizium was proposed. Principal Component Analysis (PCA) indicated that despite the similar elimination pathway in all the examined Metarhizium species, there are significant differences in the kinetics of degradation of 4-n-NP. Oxidation of the terminal methyl group of the aliphatic chain leading to the formation of carboxylic acids coupled with the removal of terminal carbon is characteristic of M. robertsii and M. guizhouense, whereas metabolites with a hydroxyl group in the distal part of the nonyl chain distinguish M. lepidiotae and M. majus. Additionally, this study verified the participation of cytochrome P450 in the elimination of the xenobiotic by Metarhizium as experimentally proven for M. robertsii.

Effect of phosphate amendments on improving the fertilizer efficiency and reducing the mobility of heavy metals during sewage sludge composting

Composting has been globally applied as an effective and cost-efficient process to manage and reuse sewage sludge. In the present study, four different phosphates as well as a mixture of ferrous sulfate and monopotassium phosphate were used in sewage sludge composting. The results showed that these phosphate amendments promoted an increase in temperature and the degradation of organic matter as well as reduction on nitrogen loss during 18 days of composting. In addition, ferrous sulfate and phosphate had a synergistic effect on reducing nitrogen loss. The contents of total phosphorus and available phosphorus in the compost with addition of 1% phosphate were 40.9% and 66.1% higher than the compost with control treatment. Using the BCR (Community Bureau of Reference) sequential extraction procedure, the addition of calcium magnesium phosphate significantly reduced the mobility factor of Cd, Zn and Cu by 24.2%, 1.7% and 18.8%, respectively. The mobility factors of Pb were increased in all samples, but the monopotassium phosphate treated sample exhibited the greatest Pb passivation ability with the lowest mobility factor increase (1.8%) among all treatments. The X-ray diffraction patterns of compost samples indicated that the passivation mechanism of Cu and Zn may be the forming CuFeS₂ and ZnCu(P₂O₇) crystals during sewage sludge composting. The germination index showed that the compost of all treatments was safe for agricultural application; the germination index of the calcium magnesium phosphate treatment was 99.9 ± 11.8%, which was the highest among all treatments.

The transformation of different dissolved organic matter subfractions and distribution of heavy metals during food waste and sugarcane leaves co-composting

As a heterogeneous fraction, dissolved organic matter (DOM) in a compost is the most active because of its direct supply of energy sources for microbes. Also, the transfer and distribution of heavy metals in the DOM fraction attract many attentions of researchers. To this end, the dynamics of humic acids (HA), fulvic acids (FA), hydrophobic neutrals (HoN), and hydrophilic (Hi) fractions derived from DOM was investigated in this study, and the transformation of different DOM subfractions and distribution of heavy metals during food waste and sugarcane leaves co-composting were assessed by excitation-emission matrix fluorescence (EEM-FL) and inductively coupled plasma mass spectrometry (ICP-MS), respectively. The results revealed that HA transformed from polycyclic aromatic humic acid-like to polycarboxylic humic acid-like and FA changed from soluble microbial products (SMP) to humic acid-like; Hi and HoN composed mainly of SMP substances; FA showed more abundant compositions, such as SMP, humic acid-like and tryptophan. Heavy metals (As, Cd, Cr, Cu, Hg, Ni, Pb and Zn) were redistributed among different DOM subfractions in the thermophilic phase of composting. Compost DOM and its subfractions showed obvious effects on germination index (GI), biomass, root length, shoot length and healthy index of Chinese cabbage seedlings. These findings shed some novel lights into the dynamic composition and characteristics of DOM subfractions and their impacts on heavy metals distribution in a composting process.

Application of ceramsite and activated alumina balls as recyclable bulking agents for sludge composting

Composting is a major sludge-treatment method and bulking agents are very important in sludge composting. In this study, ceramsite and activated alumina balls were chosen as recyclable bulking agents for sludge composting. Variations in the temperature, pH, electrical conductivity, organic matter, dissolved organic carbon, moisture content, and heavy metals were detected during composting with different bulking-agent treatments as well as differences in the germination index values. The results showed that both bulking agents could ensure the maturity of the compost; further, ceramsite treatment resulted in the best water removal efficiency. According to the sequential extraction procedure, both ceramsite and activated alumina balls could stabilize Cd but they also increased the mobility of Zn. After comparing the effects of different particle sizes of ceramsite on composting, 20 mm was determined to be the most optimal value. Additionally, the recovery rates of ceramsite and activated alumina balls were 96.9% and 99.9%, respectively.

Application of sewage sludge to agricultural soil increases the abundance of antibiotic resistance genes without altering the composition of prokaryotic communities

The application of sewage sludge as soil amendment is a common agricultural practice. However, wastewater treatment plants, sewage sludge and sewage sludge-amended soils have been reported as hotspots for the appearance and dissemination of antibiotic resistance, driven, among other factors, by selection pressure exerted by co-exposure to antibiotics and heavy metals. To address this threat to environmental and human health, soil samples from a long-term (24 years) field experiment, carried out to study the impact of thermally dried and anaerobically digested sewage sludge (at different doses and frequencies of application) on agricultural soil quality, were investigated for the presence of genes encoding antibiotic resistance (ARGs) and mobile genetic elements (MGEs). Sewage sludge-induced changes in specific soil physicochemical and microbial properties, as indicators of soil quality, were also investigated. The application of sewage sludge increased the total concentration of copper and zinc in amended soils, but without affecting the bioavailability of these metals, possibly due to the high values of soil pH and organic matter content. Soil microbal quality, as reflected by the value of the Soil Quality Index, was higher in sewage sludge-amended soils. Similarly, the application of sewage sludge increased soil microbial activity and biomass, as well as the abundance of ARGs and MGE genes, posing a risk of dissemination of antibiotic resistance. In contrast, the composition of soil prokaryotic communities was not significantly altered by the application of sewage sludge. We found correlation between soil Cu and Zn concentrations and the abundance of ARGs and MGE genes. It was concluded that sewage sludge-derived amendments must be properly treated and managed if they are to be applied to agricultural soil.

Oxygen Monitoring Equipment for Sewage-Sludge Composting and Its Application to Aeration Optimization

Oxygen is an important parameter for organic-waste composting, and continuous control of the oxygen in a composting pile may be beneficial. The oxygen consumption rate can be used to measure the degree of biological oxidation and decomposition of organic matter. However, without having a real-time online device to monitor oxygen levels in the composting pile, the adjustment and optimization of the composting process cannot be directly implemented. In the present study, we researched and developed such a system, and then tested its stability, reliability, and characteristics. The test results showed that the equipment was accurate and stable, and produced good responses with good repeatability. The equilibrium time required to detect oxygen concentration in the composting pile was 50 s, and the response time for oxygen detection was less than 2 s. The equipment could monitor oxygen concentration online and in real time to optimize the aeration strategy for the compost depending on the concentration indicated by the oxygen-measuring equipment.

Acidogenic bacteria assisted biodegradation of nonylphenol in waste activated sludge during anaerobic fermentation for short-chain fatty acids production

Nonylphenol (NP) biodegradation under anaerobic conditions is difficult. Here, enhancement of anaerobic NP biodegradation mainly by regulating the role of acidogenic bacteria during anaerobic fermentation of waste activated sludge (WAS) for short-chain fatty acids production is reported. The maximum degradation efficiency of NP (69.4%) was achieved under conditions of pH 10.0 and 10 mg/L Brij 35 within 8 d, which was nearly 3-fold of that in the control (24.6%). Mechanism exploration revealed that the bioavailability of NP and specific NP-degrading bacteria and their functional genes were advantageous to NP biodegradation with alkaline pH and surfactant. More importantly, acidogenic bacteria, the dominant functional bacteria in WAS fermentation systems, were demonstrated to be involved in NP anaerobic biodegradation by providing intermediate organic substrates, as well as through their intrinsic NP-degrading abilities. Possible pathways of NP biodegradation assisted by acidogenic bacteria during anaerobic fermentation were also proposed based on the detected metabolites.