Biomass burning and fungal spores as sources of fine aerosols in Yangtze River Delta, China - Using multiple organic tracers to understand variability, correlations and origins

Comparing levoglucosan and mannosan ratios in sediments and corresponding aerosols from recent Australian fires

The monosaccharide anhydrides levoglucosan, mannosan, and galactosan are known as 'fire sugars' as they are powerful proxies used to trace fire events. Despite their increasing use, their application is not completely understood, especially in the context of tracing past fire events using sediment samples. There are many uncertainties about fire sugar formation, partitioning, transport, complexation, and stability along all stages of the source-to-sink pathway. While these uncertainties exist, the efficacy of fire sugars as fire tracers remains limited. This study compared high-resolution fire sugar fluxes in freshwater sediment cores to known fire records in Tasmania, Australia. Past fire events correlated with fire sugar flux increases down-core, with the magnitude of the flux inversely proportional to the distance of the fires from the study site. For the first time, fire sugar ratios (levoglucosan/mannosan, L/M) in aerosols were compared with those in sediments from the same time-period. The L/M ratio in surface sediments (1.42-2.58) were significantly lower than in corresponding aerosols (5.08-15.62). We propose two hypotheses that may explain the lower average L/M of sediments. Firstly, the degradation rate of levoglucosan is higher than mannosan in the water column, sediment-water interface, and/or sediment. Secondly, the L/M ratio of non-atmospheric emissions during fires may be lower than that of atmospheric emissions from the same fire. Due to the uncertainties about transport partitioning (atmospheric versus non-atmospheric emissions) and fire sugar degradation along all stages of the source-to-sink pathway, we advise caution when inferring vegetation type (e.g. softwood, hardwood, or grasses) based purely on fire sugar ratios in sediments (e.g. L/M ratio). Future investigations are required to increase the efficacy of fire sugars as a complimentary, or standalone, fire tracer in sediments.

Neutral saccharides and hemicellulose over two urban sites in Indo-Gangetic Plain and Central Europe during winter

Saccharides are ubiquitous organic compounds that are omnipresent in nature and are considered tracers of aerosol sources. Saccharides and hemicellulose were analyzed in the aerosols of two polluted regions (Allahabad, India and Sosnowiec, Poland). The chemical compositions of the compounds and their abundances were significantly different at the two sites. Levoglucosan was the most dominant saccharide present at both sites. Galactosan, anhydroglucofuranose, mannosan, glucose, arabitol, D-pinitol, sucrose, and trehalose were found in Allahabad samples in high abundance but were significantly lower than levoglucosan. Mannosan, galactosan, arabinose, glycerol, and sucrose were significant compounds in Sosnowiec after dominating levoglucosan. The major sources of saccharides present in the Allahabad aerosols are hardwood and agricultural waste-burning emissions, whereas those at Sosnowiec are attributed to the burning of softwood (mainly gymnosperm trees), pine needles, or sporadically grass during the winter. Further, the chemical characteristics of hemicellulose remnants present in ambient aerosol at the Indian and European sites were analyzed and discussed. At both locations, hemicellulose was found using methanolysis of the filter samples; however, its state of preservation was poor. We believe that the primary sources of hemicellulose remnants are incomplete wood burning, crop straw, grass burning, or plant debris. Relatively poor preservation is associated with partial hemicellulose degradation when exposed to elevated temperatures or due to the oxidation and microbial degradation of plant fragments.

Molecular characterization of organic aerosols over the Tibetan Plateau: Spatiotemporal variations, sources, and potential implications

Organic aerosols have profound and far-reaching influences on the Earth's climate, ecosystems, environmental quality, and public health. Elucidating the precise composition and sources of these aerosols over the Tibetan Plateau, a region highly sensitive to climate change and vulnerable to ecosystems, is critically important. Sixteen organic molecular tracers in aerosols were quantified using solvent extraction-BSTFA derivatization, and GC/MS analysis at six sites over the Tibetan Plateau during 2014 and 2016. Average total tracer concentration was 32.5 ± 20.1 ng m-3. The highest levels of biomass burning tracers (anhydrosugars and aromatic acids) were found at southeastern Tibetan Plateau site Yulong (20.8 ± 21.3 ng m-3) followed by the western site Ngari (13.3 ± 10.6 ng m-3). Biomass burning tracers decreased from southern sites like Everest (9.50 ± 10.5 ng m-3) to northern aeras such as Laohugou (2.59 ± 2.19 ng m-3). Biomass burning tracers peaked in non-monsoon seasons while primary saccharides and sugar alcohols predominated during monsoon months. Using tracer-based methods, biomass burning contributed 0.4%-8.4% of organic carbon over the plateau, with higher non-monsoon contributions (3.6% ± 3.7%). Backward air mass trajectories and fire spots indicated South Asian biomass burning impacts on organic aerosols at western, southern, and southeastern Tibetan Plateau sites, particularly in non-monsoon periods. Fungal spores and plant debris comprised 0.6%-6.3% and 0.3%-1.2% of organic carbon respectively, with higher monsoon contributions (4.2% ± 4.7%) of fungal spores. Secondary organic carbon was estimated to contribute substantially (45.5%-73.5%) over the plateau but requires further investigation. These results provide insights into pollution mitigation and the assessments of climate and ecology changes for the Tibetan Plateau.

Pollution characteristics and human health risks of PM2.5-bound heavy metals: a 3-year observation in Suzhou, China

This study aimed to analyze the temporal trends, pollution levels, and health risks associated with eleven PM_2.5-bound heavy metals (Sb, Al, As, Hg, Cd, Cr, Mn, Ni, Pb, Se and Tl). A total of 504 PM_2.5 samples were collected in Suzhou from January 2019 to December 2021. The pollution levels were estimated based on enrichment factors (EFs) which can be used to calculate the enrichment of heavy metals in PM_2.5 and determine whether the concentrations of PM_2.5-bound heavy metals are influenced by the crustal or anthropogenic sources, and the health risk of PM_2.5-bound heavy metals via inhalation was assessed following US EPA's Risk Assessment Guidance for Superfund (RAGS). The annual average concentration of PM_2.5 was 46.76 μg m^-3, which was higher than the WHO recommended limit of 5 μg m^-3. The average of the sum of eleven PM_2.5-bound heavy metals was 180.61 ng m^-3, dominated by Al, Mn, and Pb. The concentration of PM_2.5 in 2020 was significantly lower than that in 2019 and 2021. The PM_2.5 and PM_2.5-bound heavy metal concentrations in winter and spring were significantly higher than those in autumn and summer. The EF of As, Cr, Cd, Hg, Ni, Pb, Sb, Mn, Se, and Tl was higher than 10, indicating they were mainly from anthropogenic sources. Exposure to a single non-carcinogenic heavy metal via inhalation was unlikely to cause non-carcinogenic effects (HQ < 1), but the integrated non-carcinogenic risks should be taken seriously (HI > 1). The cumulative carcinogenic risks from the carcinogenic elements were exceeding the lower limit (1 × 10^-6) of the acceptable risk range. The carcinogenic risks of As and Cr(VI) contributed 60.98% and 26.77%, respectively, which were regarded as two key carcinogenic risk factors. Overall, the government policies and countermeasures for the PM_2.5 pollution control should be performed not only based on the PM_2.5 concentration but also based on the PM_2.5-bound heavy metals and their health risks for the local residents.

Thermochemical conversion of large-size woody biomass for carbon neutrality: Principles, applications, and issues

Large-size woody biomass is a valuable renewable resource to replace fossil fuels in biorefinery processes. The preprocessing of wood chips and briquettes is challenging to manage, especially in an industrial setting, as it generates a significant amount of dust and noise and occasionally causes unexpected accidents. As a result, a substantial amount of resources, energy, labor, and space are needed. The thermochemical conversion behavior of large-size woody biomass was studied to reduce energy consumption for chipping. Large-size wood was 1.5 m in length, 0.1 m in breadth, and stacked 90 cm in height. This strategy has many benefits, including increased effectiveness and reduced CO₂ emissions. The target of this paper presents the thermochemical process, and large-size wood was chosen because it provides high-quality product gas while reducing the preprocessing fuel cost. This review examines the benefits of thermochemical conversion technologies for assessing the likelihood of carbon neutrality.

Unexpected rise of atmospheric secondary aerosols from biomass burning during the COVID-19 lockdown period in Hangzhou, China

After the global outbreak of COVID-19, the Chinese government took many measures to control the spread of the virus. The measures led to a reduction in anthropogenic emissions nationwide. Data from a single particle aerosol mass spectrometer in an eastern Chinese megacity (Hangzhou) before, during, and after the COVID-19 lockdown (5 January to February 29, 2020) was used to understand the effect lockdown had on atmospheric particles. The collected single particle mass spectra were clustered into eight categories. Before the lockdown, the proportions of particles ranked in order of: EC (57.9%) < K-SN (13.6%) < Fe-rich (10.2%) < ECOC (6.7%) < K-Na (6.6%) < OC (3.4%) < K-Pb (1.0%) < K-Al (0.7%). During the lockdown period, the EC and Fe-rich particles decreased by 42.8% and 93.2% compared to before lockdown due to reduced vehicle exhaust and industrial activity. By contrast, the K-SN and K-Na particles containing biomass burning tracers increased by 155.2% and 45.2% during the same time, respectively. During the lockdown, the proportions of particles ranked in order of: K-SN (39.7%) < EC (38.1%) < K-Na (11.0%) < ECOC (7.7%) < OC (1.2%) < K-Pb (0.9%) < Fe-rich (0.8%) < K-Al (0.6%). Back trajectory analysis indicated that both inland (Anhui and Shandong provinces) and marine transported air masses may have contributed to the increase in K-SN and K-Na particles during the lockdown, and that increased number of fugitive combustion points (i.e., household fuel, biomass combustion) was a contributing factor. Therefore, the results imply that regional synergistic control measures on fugitive combustion emissions are needed to ensure good air quality.

Molecular and elemental marker-based source apportionment of fine particulate matter at six sites in Hong Kong, China

Source apportionment of PM_2.5 was performed using positive matrix factorization (PMF) based on chemical speciation data from 24-h filters collected throughout 2015 at six sampling sites of varying urban influences in Hong Kong. The input data include major inorganic ions, organic and elemental carbon, elements, and organic tracers. Nine factors were resolved, including (1) secondary sulfate formation process, (2) secondary nitrate formation process, (3) industrial emissions, (4) biomass burning, (5) primary biogenic emissions, (6) vehicle emissions, (7) residual oil combustion, (8) dust, and (9) aged sea salt. The PMF-resolved factor contributions in conjunction with air mass back trajectories showed that the two major sources for PM_2.5 mass, secondary sulfate (annual: 41%) and secondary nitrate (annual: 9.9%), were dominantly associated with regional and super-regional pollutant transport. Vehicular emissions are the most important local source, and its contributions exhibit a clear spatial variation pattern, with the highest (6.9 μg/m³, 24% of PM_2.5) at a downtown roadside location and the lowest (0.4 μg/m³, 2.0% PM_2.5) at two background sites away from city centers. The ability of producing a more reliable source separation and identifying new sources (e.g. primary biogenic source in this study) was a direct advantageous result of including organic tracers in the PMF analysis. PMF analysis conducted on the same dataset in this study but without including the organic tracers failed to separate the biomass burning emissions and industrial/coal combustion emissions. PMF analysis without the organic tracers would also over-apportion the contribution of vehicular emissions to PM_2.5, which would bias the evaluation of the effectiveness of vehicle-related control measures. This work demonstrates the importance of organic markers in achieving more comprehensive and less biased source apportionment results.

Thermochemical Conversion of Lignocellulosic Biomass into Mass-Producible Fuels: Emerging Technology Progress and Environmental Sustainability Evaluation

Lignocellulosic biomass is increasingly recognized as a carbon-neutral resource rather than an organic solid waste nowadays. It can be used for the production of various value-added chemicals and biofuels like bio-oil. However, the undesirable properties of bio-oil such as chemical instability, low heating value, high corrosivity, and high viscosity are greatly restricting the utilization of bio-oil as a drop-in fuel. As a consequence, bio-oil should be upgraded. Recently, several emerging methods, such as electrocatalytic hydrogenation, atmospheric distillation, and plasma-assisted catalysis, have been developed for improving the bio-oil quality under mild conditions. Here, we overview the new knowledge on the molecular structure of lignocellulosic biomass gained over the past years and discuss the future challenges and opportunities for further advances of the bio-oil production and upgrading from lignocellulosic biomass. The development of sustainable biomass resource recycle systems with improved efficiency and minimized environmental impacts is analyzed in details. Also, their environmental impacts and sustainability are evaluated. Lastly, the remaining knowledge gaps are identified, and the future research needs that may lead to massive production of biofuels from lignocellulosic biomass are highlighted.

Saccharides in atmospheric particulate and sedimentary organic matter: Status overview and future perspectives

Saccharides are omnipresent compounds in terrestrial and marine ecosystems. Since the 2000s, their role in environmental and geochemical studies has significantly increased, but only anhydrosaccharides (mainly levoglucosan) have been reviewed. Here we present the wider knowledge about saccharides in organic matter of aerosols, bottom sediments, soils, dust, and sedimentary rocks. The main purpose here is to characterize the possible sources of saccharides, as well as sacharol formation, seasonal variability, and the possible applications in environmental and paleoenvironmental interpretations. Different saccharide sources were designated, including biomass burning, and particulate matter such as pollen, spores, lichen, and fungi, as well as polysaccharide decomposition as possible inputs of monosaccharides. The main focus was on the most common saccharides encountered in environmental samples and sedimentary rocks. These are the mono- and disaccharides glucose, fructose, sucrose, and trehalose, and sacharols arabitol and mannitol. The anhydrosaccharides levoglucosan, mannosan, and galactosan were evaluated as ancient wildfire indicators and industrialization tracers found in lacustrine sediments starting from Pleistocene to contemporary deposits. However, other anhydrosaccharides like xylosan and arabinosan were also found as products of fossil wood burning. These anhydrosaccharides have the potential to be further tracers of hemicellulose burning. Additional recommendations are proposed for future research, including environmental and paleoenvironmental topics that need to be addressed.

Emission factors and chemical characterization of particulate emissions from garden green waste burning

This work provides an evaluation of the emission factors (EFs) of typical garden waste burning (fallen leaves and hedge trimming) in terms of particulate matter (PM), elemental and organic carbon (EC-OC) together with a detailed chemical characterization of 88 particle-bound organic species including polycyclic aromatic hydrocarbons (PAHs), levoglucosan and its isomers, lignin breakdown products (methoxyphenols), cholesterol, alkanes, polyols and sugars. Furthermore, wood-log based burning experiments have been performed to highlight key indicators or chemical patterns of both, green waste and wood burning (residential heating) sources, that may be used for PM source apportionment purposes. Two residential log wood combustion appliances, wood stove (RWS) and fireplace, under different output conditions (nominal and reduced) and wood log moisture content (mix of beech, oak and hornbeam), have been tested. Open wood burning experiments using wood logs were also performed. Green waste burning EFs obtained were comparable to the available literature data for open-air biomass burning. For PM and for most of the organic species studied, they were about 2 to 30 times higher than those observed for wood log combustion experiments. Though, poor performance wood combustions (open-air wood log burning, fireplace and RWS in reduced output) showed comparable EFs for levoglucosan and its isomers, methoxyphenols, polyols, PAHs and sugars. Toxic PAH equivalent benzo[a]pyrene EFs were even 3-10 times higher for the fireplace and open-air wood log burning. These results highlighted the impact of the nature of the fuel burnt and the combustion performances on the emissions. Different chemical fingerprints between both biomass burning sources were highlighted with notably a predominance of odd high-molecular weight n-alkanes (higher carbon preference index, CPI), lower levoglucosan/mannosan ratio and lower sinapylaldehyde abundance for green waste burning. However, the use of such indicators seems limited, especially if applied alone, for a clear discrimination of both sources in ambient air.

Source profiles and emission factors of organic and inorganic species in fine particles emitted from the ultra-low emission power plant and typical industries

Accurate source markers, source profiles and species-based emission factors (EFs) are currently the key limitations for source apportionment and emission inventory researches. Fine particles (PM_2.5) were collected from stack gases of eight types of stationary sources with a dilution sampling system. The mass percentages and EFs of 89 kinds of chemical species in PM_2.5 including water-soluble ions, elements, carbonaceous species and molecular organic species were obtained. Results showed that water-soluble ions (8%-54%) and elements (5%-45%) were the dominant chemical species. Palmitic acid (0.19%-0.62%) and stearic acid (0.21%-0.59%) were the most abundant organic species. PM_2.5 source profiles of the eight sources were different from each other with the coefficient of divergence values all higher than 0.4. The addition of organic species could help to further distinguish them. The indicatory chemical components and specific species ratios were obtained by both a statistical equation and randomForest. These indicatory chemical components (e.g. F^- for glass factory) and species ratios (e.g. K⁺/Mg²⁺ & OC/Mg for pharmaceutical factory) improved the current knowledges of their indicatory performance in source identification of ambient PM_2.5. The EFs of PM_2.5 from the eight stationary sources ranged from 0.019 to 51.6 kg t^-1 of fuel used. The EFs of PM_2.5 from the pharmaceutical factory were about 70-2600 times higher than other seven types of sources due to the lack of dust-removing devices. Certain EFs measured in this study were about 10-36,000 times lower than corresponding EFs estimated in previous studies which didn't perform field measurements, indicating the necessity for improving emission inventories continuously. This study contributes to identifying emission sources of PM_2.5 especially for subtypes of stationary sources and to establishing species-based emission inventories.

Characteristics, sources, and health risks of PM2.5-bound trace elements in representative areas of Northern Zhejiang Province, China

This study aimed to characterize PM_2.5-bound trace elements in Northern Zhejiang Province (NZP), one of the most economically prosperous regions in China, and assess the associated health risks for the general populations. A year-long sampling campaign was conducted at four sites representative of urban, suburban, and rural areas of NZP. The average of the sum of twenty trace elements in PM_2.5 was 2.8 ± 0.4 μg m^-3, dominated by K, Al, Fe, Mg, Zn, and V (>100 ng m^-3). The highest total elements' concentration occurred in winter, followed by autumn, spring, and summer. Enrichment factors and principal component analysis (PCA) revealed that the major sources of trace elements in NZP were fossil fuel combustion, biomass burning, crustal dust, traffic, and industrial emissions. Elevated concentrations of certain elements reflected featured sources in different areas, e.g., V and Ni from heavy oil combustion in the port city, and Cu, Fe and Ba from traffic emissions in urban areas. Arsenic (As) represented the major non-cancer risk driver as its hazard quotient was 8.7. The cumulative cancer risk from all the carcinogenic elements was 1.7 × 10^-3 in NZP, exceeding the upper limit (10^-4) of the acceptable risk range. As and Cr contributed 33% and 66%, respectively, and thus were regarded as cancer risk drivers. The high health risks from PM_2.5-bound elements warrant future actions to control their emissions in this region. Priorities should target industrial operations and coal combustion emissions, as informed by the risk drivers.

Isomerization and Degradation of Levoglucosan via the Photo-Fenton Process: Insights from Aqueous-Phase Experiments and Atmospheric Particulate Matter

So far, studies on the conversion of stereochemistry under photo-Fenton conditions and their atmospheric implication are still rare. Here, we found that the biomass burning marker, the chiral compound levoglucosan (L), undergoes oxidative degradation under photo-Fenton conditions and can be isomerized into mannosan (M) and galactosan (G) simultaneously. Among the formic acid, acetic acid, and oxalic acid in the degradation products of levoglucosan, it was found that the yield of formation of formic acid in the photo-Fenton pathway can be as high as 86%. It is worth noting that both levoglucosan and its isomers are present in the atmosphere and their concentrations are strongly correlated. At the same time, the range of their concentration ratios, L/(G + M), measured in the photo-Fenton experiments in the laboratory was found to agree well with that measured in atmospheric PM_2.5 samples. However, the sources of L, G, and M in the atmosphere are complex, and the photo-Fenton reaction may be an essential pathway for the distribution of L, G, and M in the atmosphere.