Construction of SnO2/g-C3N4 an effective nanocomposite for photocatalytic degradation of amoxicillin and pharmaceutical effluent

Recent progresses in synthesis and modification of g-C3N4 for improving visible-light-driven photocatalytic degradation of antibiotics

Graphitic carbon nitride (g-C3N4) is a widely studied visible-light-active photocatalyst for low cost, non-toxicity, and facile synthesis. Nonetheless, its photocatalytic efficiency is below par, due to fast recombination of charge carriers, low surface area, and insufficient visible light absorption. Thus, the research on the modification of g-C3N4 targeting at enhanced photocatalytic performance has attracted extensive interest. A considerable amount of review articles have been published on the modification of g-C3N4 for applications. However, limited effort has been specially contributed to providing an overview and comparison on available modification strategies for improved photocatalytic activity of g-C3N4-based catalysts in antibiotics removal. There has been no attempt on the comparison of photocatalytic performances in antibiotics removal between modified g-C3N4 and other known catalysts. To address these, our study reviewed strategies that have been reported to modify g-C3N4, including metal/non-metal doping, defect tuning, structural engineering, heterostructure formation, etc. as well as compared their performances for antibiotics removal. The heterostructure formation was the most widely studied and promising route to modify g-C3N4 with superior activity. As compared to other known photocatalysts, the heterojunction g-C3N4 showed competitive performances in degradation of selected antibiotics. Related mechanisms were discussed, and finally, we revealed current challenges in practical application.

Novel nanostructure approach for antibiotic decomposition in a spinning disc photocatalytic reactor

Conventional wastewater treatment processes are often unable to remove antibiotics with resistant compounds and low biological degradation. The need for advanced and sustainable technologies to remove antibiotics from water sources seems essential. In this regard, the effectiveness of a spinning disc photocatalytic reactor (SDPR) equipped with a visible light-activated Fe3O4@SiO2-NH2@CuO/ZnO core-shell (FSNCZ CS) thin film photocatalyst was investigated for the decomposition of amoxicillin (AMX), a representative antibiotic. Various characterization techniques, such as TEM, FESEM, EDX, AFM, XRD, and UV-Vis-DRS, were employed to study the surface morphology, optoelectronic properties, and nanostructure of the FSNCZ CS. Key operating parameters such as irradiation time, pH, initial AMX concentration, rotational speed, and solution flow rate were fine-tuned for optimization. The results indicated that the highest AMX decomposition (98.7%) was attained under optimal conditions of 60 min of irradiation time, a rotational speed of 350 rpm, a solution flow rate of 0.9 L/min, pH of 5, and an initial AMX concentration of 20 mg/L. Moreover, during the 60 min irradiation time, more than 69.95% of chemical oxygen demand and 61.2% of total organic carbon were removed. After the photocatalytic decomposition of AMX, there is a substantial increase in the average oxidation state and carbon oxidation state in SDPR from 1.33 to 1.94 and 3.2, respectively. Active species tests confirmed that ·OH and ·O2- played a dominant role in AMX decomposition. The developed SDPR, which incorporates a reusable and robust FSNCZ CS photocatalyst, demonstrates promising potential for the decomposition of organic compounds.

Integrating g-C3N4 nanosheets with MOF-derived porous CoFe2O4 to form an S-scheme heterojunction for efficient pollutant degradation via the synergy of photocatalysis and peroxymonosulfate activation

When confronted with wastewater that is characterized by complex composition, stable molecular structure, and high concentration, relying solely on photocatalytic technology proves inadequate in achieving satisfactory degradation results. Therefore, the integration of other highly efficient degradation techniques has emerged as a viable approach to address this challenge. Herein, a novel strategy was employed whereby the exfoliated g-C3N4 nanosheets (CNs) with exceptional photocatalytic performance, were intimately combined with porous rod-shaped cobalt ferrite (CFO) through a co-calcination process to form the composite CFO/CNs, which exhibited remarkable efficacy in the degradation of various organic pollutants through the combination of photocatalysis and Fenton-like process synergistically, exemplified by the representative case of tetracycline hydrochloride (TCH, 200 mL, 50 mg/L). Specifically, under 1 mM of peroxymonosulfate (PMS) and illumination conditions, 50 mg of 1CFO/9CNs achieved a TCH removal ratio of ∼90% after 60 min of treatment. Furthermore, this work comprehensively investigated the influence of various factors, including catalyst and PMS dosages, solution pH, and the presence of anions and humate, on the degradation efficiency of pollutants. Besides, quenching experiments and EPR tests confirmed the establishment of an S-scheme heterojunction between CNs and CFO, which facilitated the effective spatial separation of photoexcited charge carriers and preserved the potent redox potential of photogenerated electrons and holes. This work offers a valuable reference for the integration of photocatalysis with the PMS-based Fenton-like process.

Enhanced photocatalytic degradation of amoxicillin using a spinning disc photocatalytic reactor (SDPR) with a novel Fe3O4@void@CuO/ZnO yolk-shell thin film nanostructure

Antibiotics are resistant compounds with low biological degradation that generally cannot be removed by conventional wastewater treatment processes. The use of yolk-shell nanostructures in spinning disc photocatalytic reactor (SDPR) enhances the removal efficiency due to their high surface-to-volume ratio and increased interaction between catalyst particles and reactants. The purpose of this study is to investigate the SDPR equipped to Fe3O4@void@CuO/ZnO yolk-shell thin film nanostructure (FCZ YS) in the presence of visible light illumination in the photocatalytic degradation of amoxicillin (AMX) from aqueous solutions. Stober, co-precipitation, and self-transformation methods were used for the synthesis of FCZ YS thin film nanostructure and the physical and chemical characteristics of the catalyst were analyzed by XRD, VSM,, EDX, FESEM, TEM, AFM, BET, contact angle (CA), and DRS. Then, the effect of different parameters including pH (3-11), initial concentration of AMX (10-50 mg/L), flow rate (10-25 mL/s) and rotational speed (100-400 rpm) at different times in the photocatalytic degradation of AMX were studied. The obtained results indicated that the highest degradation efficiency of 97.6% and constant reaction rate of AMX were obtained under LED visible light illumination and optimal conditions of pH = 5, initial AMX concentration of 30 mg/L, solution flow rate of 15 mL/s, rotational speed of 300 rpm and illumination time of 80 min. The durability and reusability of the nanostructure were tested, that after 5 runs had a suitable degradation rate. Considering the appropriate efficiency of amoxicillin degradation by FCZ YS nanostructure, the use of Fe3O4@void@CuO/ZnO thin film in SDPR is suggested in water and wastewater treatment processes.

Synergistic influence of vanadium pentoxide-coupled graphitic carbon nitride composite for photocatalytic degradation of organic pollutant: Stability and involved Z-scheme mechanism

The removal of dyes from wastewater by photocatalytic technologies has received substantial attention in recent years. In the present study, novel Z-scheme V2O5/g-C3N4 photocatalytic composites were organized via simple hydrothermal processes and a sequence of several characterization aspects. The degradation results showed that the optimum Z-scheme GVO2 heterostructure composite photocatalysts (PCs) had a better efficiency (90.1%) and an apparent rate (0.0136 min-1) for the methylene blue (MB) aqueous organic dye degradation, which was about 6.18-fold higher than that of pristine GCN catalyst. Meanwhile, the GVO2 heterostructured PCs showed better recycling stability after five consecutive tests. Moreover, the free radical trapping tests established that •O2- and h+ species were the prime reactive species in the photocatalytic MB degradation process in the heterostructured PCs. The photocatalytic enhanced activity was primarily recognized as the synergistic interfacial construction of the Z-scheme heterojunctions among V2O5 and GCN, which improved the separation/transfer, lower recombination rate, extended visible-light utilization ability, and enhanced reaction rate. Therefore, the existing study affords a simple tactic for the development of a direct Z-scheme for photocatalytic heterojunction nanomaterials for potential environmental remediation applications.

Static adsorption and photocatalytic degradation of amoxicillin using titanium dioxide/hydroxyapatite nanoparticles based on sea scallop shells

The objective of this study is to investigate the efficiency of two processes for the amoxicillin removal through static (batch) adsorption and photocatalytic degradation onto the prepared samples. Three solid materials as photocatalyst and/or adsorbent were synthesized viz. nanotitanium dioxide (NT) prepared by the sol-gel method, scallop shells-based nanohydroxyapatite (NP), and nanotitanium dioxide/nanohydroxyapatite composite (NTP). The physicochemical and morphological properties of the prepared samples were tested by TGA, XRD, DRS, ATR-FTIR, nitrogen adsorption/desorption isotherm, zeta potential, SEM, and TEM. The major operational conditions were optimized for catalyst or adsorbent mass, pH, shaking time, initial amoxicillin (AMX) concentration, power of UV lamp, and temperature. The results illuminated that NTP achieved the highest adsorption capacity (88.46 mg/g) at 20 ℃ and AMX adsorption onto all the solid materials was well applied by Langmuir, Temkin, pseudo-second order, and Elovich models. The maximum desorption percent (98%) was attained by acetone. The degradation percent of AMX reached 85.3 and 99.5% for NT and NTP, respectively, using 0.9 g/L of catalyst dosage through 90 min. AMX photodegradation onto the catalysts' surface was well fitted by Langmuir-Hinshelwood, Arrhenius, and Eyring-Polanyi models with endothermic, physical, and nonspontaneous nature of photocatalysis process. NTP acts as a promising adsorbent and photocatalyst for the antibiotics' removal in wastewater.

Rational design of α-MnO2/HT-GCN nanocomposite for effective photocatalytic degradation of ciprofloxacin and pernicious activity

The present study is mainly concerned with the development of cost-efficient composite material utilized to produce one-dimensional manganese oxide (α-MnO2) nanoparticles coated on two-dimensional graphitic carbon nitrides (HT-GCN) as nanocomposite (α-MnO2/HT-GCN) for highly efficient CIP degradation. The α-MnO2 nanoparticles (NPs) were prepared by a simple hydrothermal technique before being decorated on HT-GCN (H denotes protonation and T represents thermal-decomposition-graphitic carbon nitride). Tauc plots were used to calculate the band gap values of the photocatalysts α-MnO2 (1.74 eV), GCN (2.84 eV), HT-GCN (2.63 eV), and α-MnO2/HT-GCN (2.31 eV). The mechanism was investigated by various scavengers, particularly isopropanol (•OH) makes a significant role in the photodegradation process. The degradation percentage for ciprofloxacin was 89.2% and the rate of reaction R2 = 0.9913. This study demonstrates a unique method for developing a heterojunction-based nanocomposite of α-MnO2/HT-GCN, which exhibit better light absorption performance.

Yolk@Wrinkled-double shell smart nanoreactors: new platforms for mineralization of pharmaceutical wastewater

Nanomaterials with "yolk and shell" "structure" can be considered as "nanoreactors" that have significant potential for application in catalysis. Especially in terms of electrochemical energy storage and conversion, the nanoelectrode has a large specific surface area with a unique yolk@shell structure, which can reduce the volume change of the electrode during the charging and discharging process and fast ion/electron transfer channels. The adsorption of products and the improvement of conversion reaction efficiency can greatly improve the stability, speed and cycle performance of the electrode, and it is a kind of ideal electrode material. In this research, heterojunction nanoreactors (FZT Y@WDS) Fe3O4@ZrO2-X@TiO2-X were firstly synthesized based on the solvothermal combined hard-template process, partial etching and calcination. The response surface method was used to determine the performance of the FZT Y@WDS heterojunction nanoreactors and the effects of four process factors: naproxen concentration (NAP), solution pH, the amount of charged photocatalyst, and the irradiation time for photocatalytic degradation of NAP under visible light irradiation. To maximize the photocatalytic activity, the parameters of the loaded catalyst, the pH of the reaction medium, the initial concentration of NAP, and the irradiation time were set to 0.5 g/L, 3, 10 mg/L, and 60 min, respectively, resulting in complete removal of NAP and the optimum amount was calculated to be 0.5 g/L, 5.246, 14.092 mg/L, and 57.362 min, respectively. Considering the promising photocatalytic activity of FZT Y@WDS under visible light and the separation performance of the nanocomposite, we proposed this photocatalyst as an alternative solution for the treatment of pharmaceutical wastewater.

Facile synthesis of hollow spherical g-C3N4@LDH/NCQDs ternary nanostructure for multifunctional antibacterial and photodegradation activities

Heterojunction nanostructure construction and morphology engineering are considered to be effective approaches to improve photocatalytic performance. Herein, ternary hierarchical hollow structures consisting of cobalt-aluminum-layered double hydroxide (CoAl-LDH) nanoplates grown on hollow carbon nitride spheres (HCNS) and decorated with N-doped carbon quantum dots (NCQDs) were prepared using a templating method and a subsequent solvothermal process. The obtained HCNS@LDH/NCQD composites presented an improved performance in photocatalytic degradation of tetracycline and inactivation of E. coli compared with pure HCNS and LDH under visible light illumination. The enhanced photocatalytic activity of the designed photocatalyst could be attributed to the following reasons: (1) A special hollow structure provides more active sites and has multiple capabilities of light reflection by helping with a high specific surface area that improves the harvesting efficiency of solar light and (2) the strong synergistic effect among the constituents, which promotes separation and transfer of charge carriers and broadens the photo-response range.

Inactivation of algae by visible-light-driven modified photocatalysts: A review

Harmful algal blooms have raised great concerns due to their adverse effects on aquatic ecosystems and human health. Recently, visible light-driven (VLD) photocatalysis has attracted attention for algae inactivation owing to its unique characteristics of low cost, mechanical stability, and excellent removal efficiency. However, the low utilization of visible light and the high complexation rate of electron-hole (e^--h⁺) pairs are essential drawbacks of conventional photocatalysts. Scientific efforts have been devoted to modifying VLD photocatalysts to enhance their antialgal activity. This review concisely summarizes the anti-algae performance of the latest modified VLD photocatalysts. The summary of the mechanisms in VLD photocatalytic inactivation demonstrates that reactive oxygen species (ROS) can induce oxidative damage to algal cells and photocatalytic degradation of released organic matter. In addition, the factors, such as photocatalyst dosage, algal concentration and species, and the physicochemical properties of different water matrices, such as pH, natural organic matter, and inorganic ions, affecting the efficacy of VLD catalytic oxidation for algae removal are briefly outlined. Thereafter, this review compiles perspectives on the emerging field of VLD photocatalytic inactivation.

Facile construction of cost-effective zinc-aluminium polymeric framework for efficient removal of selective both drug and dye from an aqueous medium

A novel aluminium (Al) and its active alloys are extensively been used in nearly all areas owing to their cost-effectiveness. But when it is subjected to an aqueous medium, gets corroded through a chemical response. In this paper, a novel framework was fabricated by copolymer coating over on Al and loaded with zinc via electro polymerization and electrodeposition method ([EDA- OPDA]Al@Zn). The as-fabricated composite has emerged for the sorption of Methylene Blue (MB) aqueous dye and Paracetomal drug (PAR). The as-fabricated composite framework has been categorized via IR spectra, FE-SEM images, and EDX spectra. The sorption progression was optimized for numerous prompting features like pH, contact time and impact of dosage. Based on kinetics data, the growth in QE value by an enhancement in temperature for adsorption and the higher r values shows the adsorption progression is a pseudo-second-order model. The thermodynamic constraints specify that the field of adsorbate is impulsive and typical endothermic process. Instead, the corrosion resistance of a composite in the 3.5% of NaCl. Solution was explored via EIS spectra and potentio-dynamic polarization. Depending on the observed features, it indicates that the [EDA-OPDA]Al@Zn framework provided fantastic corrosion resistance. So it is obvious that the as-synthesized framework is of multitasking, that it could be successfully performed for the exclusion of MB aqueous dye and PAR drug from the aqueous medium and it also withstands effectively in this corrosive medium.

Photoelectrochemical water oxidation over TiO2 nanotubes modified with MoS2 and g-C3N4

TiO2 nanotube arrays (TNAs) have been studied for photoelectrochemical (PEC) water splitting. However, there are two major barriers of TNAs, including a low photo-response and the fast charge carrier recombination in TNAs, leading to poor photocatalytic efficiency. Through a comparison of MoS2/TNAs and g-C3N4/TNAs, it was found that TNAs modified with MoS2 and g-C3N4 exhibited a current density of, respectively, 210.6 and 139.6 μA·cm-2 at an overpotential of 1.23 V vs RHE, which is 18.2 and 12 times higher than that of pure TNAs under the same conditions. The stability of the MoS2/TNAs heterojunction is higher than that of g-C3N4/TNAs.

Nanohybrid catalysts with porous structures for environmental remediation through photocatalytic degradation of emerging pollutants

Water supplies have been seriously challenged by new emerging pollutants, which are difficult to remove by traditional wastewater treatment. Thus, new technologies such as catalytic advanced oxidation processes have merged as suitable solutions; however, the drawbacks of typical catalysts limit their application. To overcome this issue, new materials with enhanced textural properties have been developed, showing that their porosity and chemical nature influence their potential as a catalyst. Herein, the recent progress in highly porous catalysts and their suitable deployment to effectively nano-remediate the polluted environmental matrices are reviewed in detail. First, following a brief introduction, several environmental pollutants of emerging concerns from different sectors, including pharmaceutical residues, endocrine-disrupting chemicals (EDCs), pesticides, and hazardous dyes are also introduced with relevant examples. To effectively tackle the sustainable remediation of emerging pollutants, this work also focuses on the multifunctional features of nanohybrid porous materials that act as catalysts constructs to degrade emerging pollutants. The influence of surface reactive centers, stability, bandgap energies, light absorption capacities, and pollutants adsorption capacities are also discussed. Successful examples of the employment of nanohybrid porous catalysts for the degradation of pharmaceutical pollutants, EDCs, pesticides, and hazardous dyes are summarized. Finally, some challenges faced by nanohybrid porous materials to achieve their potential application as advanced catalysts for environmental remediation have been identified and presented herein.

Research progress of photocatalysis for algae killing and inhibition: a review

The healthy development of biodiversity has been threatened frequent water eutrophication. In recent years, photocatalytic technology, which has attracted researchers' attention, not only showed increasing potential in the field of organic pollutant degradation, but also many kinds of photocatalysts were used in the field of red tide pollution control at present, which showed superior ability to inactivate harmful algae and degrade algal toxins. Researches have also explored the mechanisms of photocatalytic algae inhibition. In this study, the current research progress in the field of photocatalytic algae inhibition was systematically discussed from several aspects, such as common types of photocatalysts, modification methods of photocatalysts, types of tested algae for photocatalytic algae inhibition, and action mechanism of inactivated algae cells, so as to provide a certain theoretical basis for further application research of photocatalysts in the field of algae removal in the later period.