Field measurements of PM2.5 emissions from typical solid fuel combustion in rural households in Fenhe Basin, China

Pollutant Emissions and Oxidative Potentials of Particles from the Indoor Burning of Biomass Pellets

Residential solid fuel combustion significantly impacts air quality and human health. Pelletized biomass fuels are promoted as a cleaner alternative, particularly for those who cannot afford the high costs of gas/electricity, but their emission characteristics and potential effects remain poorly understood. The present laboratory-based study evaluated pollution emissions from pelletized biomass burning, including CH4 (methane), NMHC (nonmethane hydrocarbon compounds), CO, SO2, NOx, PM2.5 (particulate matter with an aerodynamic diameter ≤2.5 μm), OC (organic carbon), EC (element carbon), PAHs (polycyclic aromatic hydrocarbons), EPFRs (environmentally persistent free radicals), and OP (oxidative potential) of PM2.5, and compared with those from raw biomass burning. For most targets, except for SO2 and NOx, the mass-based emission factors for pelletized biomass were 62-96% lower than those for raw biomass. SO2 and NOx levels were negatively correlated with other air pollutants (p < 0.05). Based on real-world daily consumption data, this study estimated that households using pelletized biomass could achieve significant reductions (51-95%) in emissions of CH4, NMHC, CO, PM2.5, OC, EC, PAHs, and EPFRs compared to those using raw biomass, while the differences in emissions of NOx and SO2 were statistically insignificant. The reduction rate of benzo(a)pyrene-equivalent emissions was only 16%, much lower than the reduction in the total PAH mass (78%). This is primarily attributed to the more PAHs with high toxic potentials, such as dibenz(a,h)anthracene, in the pelletized biomass emissions. Consequently, impacts on human health associated with PAHs might be overestimated if only the mass of total PAHs was counted. The OP of particles from the pellet burning was also significantly lower than that from raw biomass by 96%. The results suggested that pelletized biomass could be a transitional substitution option that can significantly improve air quality and mitigate human exposure.

Polycyclic aromatic hydrocarbons (PAHs) in coal preparation plant products: A contributor to environmental pollution

Coal and coal gangue are petrogenic sources of polycyclic aromatic hydrocarbons (PAHs), which cause adverse impacts on the environment. Raw coal, cleaned coal, slime, slack gangue, and lump gangue from the Pingshuo No. 1 Coal Preparation Plant, China, were analyzed to determine the concentrations and compositions of 16 priority parent PAHs (16PAHs) and their alkylated derivatives (aPAHs). The ∑16PAH and ∑aPAH concentrations in the samples ranged from 18.7 to 139.2 mg/kg and 22.2 to 262.3 mg/kg, respectively, and ranked as follows: cleaned coal > raw coal > slime > lump gangue > slack gangue. Coal gangues had a higher proportion and lower degree of alkylation of 4-6-ring PAHs than coals. A summary analysis of references related to coal and coal gangue diagnostic ratios showed that their ratios could not be used to differentiate them from other PAH sources, indicating that the release of particulate coal and coal gangue would increase the uncertainty of environmental PAH identification results. The diagnostic ratios of coal gangue were relatively concentrated, and comparing the ratio distribution could reveal the coal gangue source PAHs. The toxicity risk of slack gangue was higher than that of lump gangue based on the benzo[a]pyrene-equivalent concentration; hence, more attention should be given to its escape to the environment.

Insight into personal exposure characteristics and health effects of PM2.5 and PM0.25-bound PAHs and their derivatives with different heating ways in the Fenwei Plain, China

Personal exposure (PE) to polycyclic aromatic hydrocarbons (PAHs) and their derivatives in particulate matter with two aerodynamic sizes of 2.5 and 0.25 μm (PM2.5 and PM0.25) from rural housewives was studied in the Fenwei Plain, China. A total of 15 households were divided into five different groups based on the type of solid fuel and heating device used, including biomass briquette-furnace (BBF), biomass-elevated Kang (BEK), outdoor lump coal-boiler (OLC), indoor briquette coal-stove (IBC), and electricity (ELE). The PE concentrations of the PAHs and biomarkers in urine collected from the participants were determined. The results showed that the PE concentrations of total quantified PAHs in the biomass group (i.e., BBF and BEK) were 2.2 and 2.0 times higher than those in the coal groups (i.e., OLC and IBC) in PM2.5 and PM0.25, respectively. The housewives who used biomass as fuel suffered from higher potential health impacts than the coal fuel users. The incremental lifetime cancer risk for the PAHs in PM2.5 in the BBF and BEK groups exceeded the international safety threshold. Furthermore, the PE concentrations of oxygenated PAH (o-PAHs) in PM2.5 and PM0.25 in the biomass groups and the nitrated PAHs (n-PAHs) in PM0.25 in the coal groups showed strong correlations with the biomarkers. The results of this study proved the associations between exposure to the different classes of PAHs and health hazards. The findings could also serve as a guideline in establishing efficient measures for using solid fuels for cooking and household warming in northern China.

Characteristics and health risk assessment of indoor and outdoor PM2.5 in a rural village, in Northeast of China: impact of coal and biomass burning

Fine particulate matter (PM2.5) has health effects that may depend on its sources and chemical composition. In this study, characteristics of PM2.5 chemical composition and health risk assessment from Songyuan, China, were investigated during day and night in indoor and outdoor from February 4 to 19, 2021. Relative high concentrations of PM2.5 were obtained in indoor environment than outdoor, with 503.95 ± 209.62 μg/m3 during the day and 357.52 ± 232.81 μg/m3 at night for the indoor environment. Relatively high total carbon, organic carbons, elemental carbons, polycyclic aromatic hydrocarbons (PAHs), and oxygenated polycyclic aromatic hydrocarbons (OPAHs) were obtained in indoor environment. However, the average concentrations of PAHs were higher during night (73.57 ± 43.09 ng/m3) in indoor and OPAHs during day (6.027 ± 2.960 ng/m3) in outdoor. They had different I/O distributions of these compounds during day and night. Indeno(1,2,3-cd) pyrene was the dominant PAHs, and benzanthrone was the dominant OPAHs; this is different with the previous studies. The high indoor/outdoor ratios showed the indoor coal and biomass burning greatly affect the indoor pollutants. Average ILCR health risk assessment for PAHs was all higher than 10-6 for different age gender, suggesting there has potential cancer risk existed for populations living in the rural coal and biomass burning area Songyuan, China.

Insight into the Primary and Secondary Particle-Bound Methoxyphenols and Nitroaromatic Compound Emissions from Solid Fuel Combustion and the Updated Source Tracers

Methoxyphenols and nitroaromatic compounds (NACs) have strong atmospheric radiative forcing effects and adverse effects on human health. They are emitted from the incomplete combustion of solid fuels and are secondarily formed through photochemical reactions. Here, an on-site study was conducted to determine the primary emission and secondary formation of particulate phase products from a variety of solid fuels through a potential aerosol mass-oxidation flow reactor. Emission factors for total quantified methoxyphenols and NACs (i.e., EF∑Methoxyphenols and EF∑NACs) varied by 2 orders of magnitude among different fuels, which were greatly influenced by volatile matter, incomplete combustibility, flame intensity, and combustion temperature. Guaiacol and 4-nitro-2-vinylphenol were used as tracers for primary organic aerosol due to the low aged-to-fresh ratios (0.21-0.97), while 4-methyl-guaiacol, 4-ethyl-guaiacol, eugenol, 4-methyl-syringol, isoeugenol, acetovanillone, syringaldehyde, homovanillin acid, vanillin acid, and syringic acid were identified as secondary organic aerosol (SOA) (aged-to-fresh ratios between 1.90 and 4.20). During simulated aging, the -CHO group reacted with the hydroxyl radical (•OH) to form the -COOH group, but there was no correlation between syringol and 4-nitrosyringol, implying that •OH is the main reactant rather than the nitriate radical (•NO3) in the atmospheric aging processes of methoxyphenols. Aging caused substantially different emission profiles due to variable photochemical reaction properties. The fresh EFs for guaiacol emitted from the biomass burning ranged from 3.80 ± 0.44 to 26.2 ± 5.40 mg·kg-1, which were much higher than those in coal combustions (of 0.03 ± 0.01 to 1.42 ± 0.28 mg·kg-1). However, the aged EFs (EFaged) for guaiacol was 1.02 ± 0.06 to 1.61 ± 0.11 mg·kg-1 in most biomass combustions, which were comparable with those of the bituminous chunk (1.20 ± 0.16 mg·kg-1). Therefore, guaiacol, a traditional biomass marker, is not an ideal tracer for aged PM2.5 emitted from biomass burning. Indeed, the syringol/guaiacol and syringol/4-nitrosyringol ratios were found to be more suitable and efficient to be used in source characterization.

Heterogeneous characteristics and absorption enhancement of refractory black carbon in an urban city of China

In this study, field measurement was conducted using an integrated online monitoring system to characterize heterogeneous properties and light absorption of refractory black carbon (rBC). rBC particles are mainly from the incomplete combustion of carbonaceous fuels. With the data collected from a single particle soot photometer, thickly coated (BC_kc) and thinly coated (BC_nc) particles are characterized with their lag times. With different responses to the precipitation, a dramatical decline of 83 % in the number concentration of BC_kc is shown after rainfall, while that of BC_nc decreases by 39 %. There is a contrast in core size distribution that BC_kc is always with larger particle sizes but has smaller core mass median diameters (MMD) than BC_nc. The mean rBC-containing particle mass absorption cross-section (MAC) is 6.70 ± 1.52 m² g^-1, while the corresponding rBC core is 4.90 ± 1.02 m² g^-1. Interestingly, there are wide variations in the core MAC values which range by 57 % from 3.79 to 5.95 m² g^-1, which are also closely related to those of the whole rBC-containing particles with a Pearson correlation of 0.58 (p < 0.01). Errors would be made if we eliminate the discrepancies and set the core MAC as a constant when calculating absorption enhancement (E_abs). In this study, the mean E_abs is 1.37 ± 0.11 while the source apportionment shows that there are five contributors of E_abs including secondary aging (37 %), coal combustion (26 %), fugitive dust (15 %), biomass burning (13 %) and traffic-related emissions (9 %). Secondary aging is found to be the highest contributor due to the liquid phase reactions in formations of secondary inorganic aerosol. Our study characterizes property diversities and provides insights into the sources impacting the light absorption of rBC and will be helpful for controlling it in the future.

County-level and monthly resolution multi-pollutant emission inventory for residential solid fuel burning in Fenwei Plain, China

The Fenwei Plain (FWP) in central China is the fourth largest plain nationwide. This region has experienced severe air pollution during the past decades, largely due to residential solid fuel burning. A regional-scale emission inventory covering multi-pollutants was currently unavailable for this area due to the lack of localized emission factors (EFs) from various sources. In this study, localized EFs derived from previous in situ measurements and detailed county-level activity data were used to develop an emission inventory of particulate and gaseous pollutants for the source sector of five residential solid fuels in the FWP in 2020. Emissions of particulate matter with an aerodynamic diameter of ≤2.5 μm (PM_2.5), organic carbon (OC), elemental carbon (EC), ions, polycyclic aromatic hydrocarbons (PAHs), carbon monoxide (CO), nitrogen oxides (NOx), sulfur dioxide (SO₂), and volatile organic compounds (VOCs) were estimated to be 230-290, 89-160, 20-29, 31-54, 0.93-22, 2100-3600, 64-87, 9.3-12, and 45-92 Gg/yr, respectively. The county-level distribution characteristics differed between pollutant species due to their different EFs and consumption patterns of solid fuels. Shouyang County emitted most for all pollutants (2.66%-4.91% of the region total) except PM_2.5 and SO₂, for which Xiangfen and Hongtong County emitted the most (2.64% and 2.90%), respectively. Emissions were higher in cold (SO₂ during November to January, other pollutants during November to February) than warm months. Uncertainties in this newly developed emission inventory were estimated to be 25.2%-69.8%, much lower than those of existing ones, demonstrating the reliability of this inventory. Gini coefficients indicated that EC, PAHs, NOx, and VOC emissions exhibited evident regional disparities, e.g., Yuncheng and Jinzhong had high pollution levels despite low economic output. Future emission control policies should first focus on developing regions with high pollution in FWP.