Effective degradation of atrazine by spinach-derived biochar via persulfate activation system: Process optimization, mechanism, degradation pathway and application in real wastewater

Green approach for fabricating hybrids of food waste-derived biochar/zinc oxide for effective degradation of bromothymol blue dye in a photocatalysis/persulfate activation system

This study presents novel composites of biochar (BC) derived from spinach stalks and zinc oxide (ZnO) synthesized from water hyacinth to be used for the first time in a hybrid system for activating persulfate (PS) with photocatalysis for the degradation of bromothymol blue (BTB) dye. The BC/ZnO composites were characterized using innovative techniques. BC/ZnO (2:1) showed the highest photocatalytic performance and BC/ZnO (2:1)@(PS + light) system attained BTB degradation efficiency of 89.47% within 120 min. The optimum operating parameters were determined as an initial BTB concentration of 17.1 mg/L, a catalyst dosage of 0.7 g/L, and a persulfate initial concentration of 8.878 mM, achieving a BTB removal efficiency of 99.34%. The catalyst showed excellent stability over five consecutive runs. Sulfate radicals were the predominant radicals involved in the degradation of BTB. BC/ZnO (2:1)@(PS + light) system could degrade 88.52%, 84.64%, 81.5%, and 77.53% of methylene blue, methyl red, methyl orange, and Congo red, respectively. Further, the BC/ZnO (2:1)@(PS + light) system effectively activated PS to eliminate 97.49% of BTB and 85.12% of dissolved organic carbon in real industrial effluents from the textile industry. The proposed degradation system has the potential to efficiently purify industrial effluents which facilitates the large-scale application of this technique.

Degradation of cefixime by photocatalysis via Ba-doped BiFeO3 nanomaterial using RSM analysis under LED light source

In the current work, Response Surface Methodology (RSM)-a statistical method-is used to optimize procedures like photocatalysis with the least amount of laboratory testing. However, to determine the most effective model for achieving the maximum rate of removal efficiency, the Response Surface Methodology was employed. The Ba-doped BiFeO3 photocatalyst was synthesized by the co-precipitation method, and its intrinsic properties were investigated by utilizing a range of spectroscopic techniques, such as FESEM, EDX, XRD, FTIR, and UV-vis. Herein, four independent factors such as, pH, contact time, pollutant concentration, and catalyst dosage were chosen. The results revealed that under acidic conditions with a contact duration of 2 min, a moderate catalyst dosage, and higher pollutant concentration, a degradation rate of 89.8% was achieved. The regression coefficient (R2) and probability value (P) were determined to be 0.99551 and 0.0301, respectively, therefore confirming the excellent fit of the RSM model. Furthermore, this research investigated the potential photocatalytic degradation mechanisms of cefixime, demonstrating that the removal efficiency of cefixime is greatly influenced by the functional parameters.

Combination of co-pyrolyzed biomass-sludge biochar and ultrasound for persulfate activation in antibiotic degradation: efficiency, synergistic effect, and reaction mechanism

A carbon material Cu-corn straw-sludge biochar (Cu-CSBC) was prepared by hydrothermally modifying sewage sludge and corn stover. The composite coupled to ultrasound can effectively catalyze the activation of PS for organic pollutants degradation, and the removal rate of 20 mg/L TC reached 89.15% in 5 min in the presence of 0.5 g/L Cu-CSBC and 3 mM PS. The synergistic effect between the factors in the system, the reaction mechanism, and the efficient removal of TC in the aqueous environment were explored in a Cu-CSBC/US/PS system established for that purpose. Quenching experiments and electron paramagnetic resonance analysis both demonstrated the Cu-CSBC/US/PS system generated •OH, SO4-•, 1O2, and O2- •, which involved in the reaction. The Cu, carboxyl, and hydroxyl groups on the Cu-CSBC surface promoted the generation of radicals and non-radicals for the degradation process, which was dominated by both radical and non-radical pathways. The degradation pathway is proposed by measuring the intermediate products with LC-MS. Finally, the stability of the Cu-CSBC/US/PS system was tested under various reaction conditions. This study not only prepared a novel biochar composite material for the active degradation of organic pollutants by PS but also provided an effective method for the resource utilization of solid waste and sludge treatment.

Machine learning-powered estimation of malachite green photocatalytic degradation with NML-BiFeO3 composites

This study explores the potential of photocatalytic degradation using novel NML-BiFeO3 (noble metal-incorporated bismuth ferrite) compounds for eliminating malachite green (MG) dye from wastewater. The effectiveness of various Gaussian process regression (GPR) models in predicting MG degradation is investigated. Four GPR models (Matern, Exponential, Squared Exponential, and Rational Quadratic) were employed to analyze a dataset of 1200 observations encompassing various experimental conditions. The models have considered ten input variables, including catalyst properties, solution characteristics, and operational parameters. The Exponential kernel-based GPR model achieved the best performance, with a near-perfect R2 value of 1.0, indicating exceptional accuracy in predicting MG degradation. Sensitivity analysis revealed process time as the most critical factor influencing MG degradation, followed by pore volume, catalyst loading, light intensity, catalyst type, pH, anion type, surface area, and humic acid concentration. This highlights the complex interplay between these factors in the degradation process. The reliability of the models was confirmed by outlier detection using William's plot, demonstrating a minimal number of outliers (66-71 data points depending on the model). This indicates the robustness of the data utilized for model development. This study suggests that NML-BiFeO3 composites hold promise for wastewater treatment and that GPR models, particularly Matern-GPR, offer a powerful tool for predicting MG degradation. Identifying fundamental catalyst properties can expedite the application of NML-BiFeO3, leading to optimized wastewater treatment processes. Overall, this study provides valuable insights into using NML-BiFeO3 compounds and machine learning for efficient MG removal from wastewater.

Effective degradation of synthetic micropollutants and real textile wastewater via a visible light-activated persulfate system using novel spinach leaf-derived biochar

A novel biochar (BC), derived from spinach leaves, was utilized as an activator for persulfate (PS) in the degradation of methylene blue (MB) dye under visible light conditions. Thorough analyses were conducted to characterize the physical and chemical properties of the biochar. The (BC + light)/PS system exhibited superior MB degradation efficiency at 83.36%, surpassing the performance of (BC + light)/hydrogen peroxide and (BC + light)/peroxymonosulfate systems. The optimal conditions were ascertained through the implementation of response surface methodology. Moreover, the (BC + light)/PS system demonstrated notable degradation ratios of 90.82%, 81.88%, and 84.82% for bromothymol blue dye, paracetamol, and chlorpyrifos, respectively, under optimal conditions. The predominant reactive species responsible for MB degradation were identified as sulfate radicals. Notably, the proposed system consistently achieved high removal efficiencies of 99.02%, 96.97%, 94.94%, 92%, and 90.35% for MB in five consecutive runs. The applicability of the suggested system was further validated through its effectiveness in treating real textile wastewater, exhibiting a substantial MB removal efficiency of 98.31% and dissolved organic carbon mineralization of 87.49%.

Photo-thermal activation of persulfate for the efficient degradation of synthetic and real industrial wastewaters: System optimization and cost estimation

The photo-thermal activation of persulfate (PS) was carried out to degrade various pollutants such as reactive blue-222 (RB-222) dye, sulfamethazine, and atrazine. Optimizing the operating parameters showed that using 0.90 g/L of PS at pH 7, temperature of 90 °C, initial dye concentration of 21.60 mg/L, and reaction time of 120 min could attain a removal efficiency of 99.30%. The degradation mechanism was explored indicating that hydroxyl and sulfate radicals were the prevailing reactive species. The degradation percentages of 10 mg/L of sulfamethazine and atrazine were 83.30% and 70.60%, respectively, whereas the mineralization ratio was 63.50% in the case of real textile wastewater under the optimal conditions at a reaction time of 120 min. The treatment cost per 1 m3 of real wastewater was appraised to be 1.13 $/m3 which assured the inexpensiveness of the proposed treatment system. This study presents an effective and low-cost treatment system that can be implemented on an industrial scale.

Constructing an orderly electron transport channel on boron regulated biomass carbon fiber for selective ROS generation and water decontamination

Antibiotic pollution has raised widely attention due to the difficult biodegradation and lasting toxicity to public health, metal-free material based heterogeneous catalysis is a highly-promise and eco-friendly technology for organics elimination. Herein, boron doped biomass carbon fiber (B-CF) was synthesized to construct orderly electron transport channels for enhancing catalytic performance and deeply purifying organics polluted water. Integrating systematical quenching experiments and EPR detection, O2·- and 1O2 are found to be dominating reactive oxygen species (ROS) for norfloxacin (NOR) degradation rather than ∙OH or SO4∙-. Adsorption, catalytic degradation in pristine CF/peroxodisulfate (PDS) and B-CF/PDS systems, electrochemical tests, and theory calculations were compared and the results suggested B-CF surface can trigger intense electron transfer via simultaneous activating NOR and PDS, and electrons transferred from NOR to B-CF-PDS compound, resulting in selective and remarkably enhanced ROS generation. Moreover, it was found that B-CF exhibited surprising adsorption capacity for NOR (834.4 mg g-1), and it can also remove SO42- from the solution through electrostatic attraction. This B-CF/PDS system is efficient within a wide operation pH from 3 to 11 and exhibits long lasting activity (> 274 h maintaining over 80% efficiency). This study unveils the highly selective formation of O2-· and 1O2 and solves the short lifetime of catalysts in persulfate-based catalysis, which provides feasible technology for advanced water purification.

Water hyacinth derived hierarchical porous biochar absorbent: Ideal peroxydisulfate activator for efficient phenol degradation via an electron-transfer pathway

In this paper, a facile hydrothermal pretreatment and molten salt activation route was presented for preparing a self-doped porous biochar (HMBC) from a nitrogenous biomass precursor of water hyacinth. With an ultrahigh specific surface area (2240 m2 g-1), well-developed hierarchical porous structure, created internal structural defects and doped surface functionalities, HMBC exhibited an excellent adsorption performance and catalytic activity for phenol removal via peroxydisulfate (PDS) activation. Specifically, the porous structure promoted the adsorption of PDS on HMBC, forming a highly active HMBC/PDS* complex and thereby increasing the oxidation potential of the system. Meanwhile, the carbon defective structure, graphitic N and CO groups enhanced the electron transfer process, favoring the HMBC/PDS system to catalyze phenol oxidation via an electron transfer dominated pathway. Thus, the system degraded phenol effectively with an ultralow activation energy of 4.9 kJ mol-1 and a remarkable oxidant utilization efficiency of 8.2 mol mol-oxidant-1 h-1 g-1. More importantly, the system exhibited excellent resistance to water quality and good adaptability for decontaminating different organic pollutants with satisfactory mineralization efficiency. This study offers valuable insights into the rational designing of a low-cost biochar catalyst for efficient PDS activation towards organic wastewater remediation.

Highly efficient activation of periodate by a manganese-modified biochar to rapidly degrade methylene blue

In this study, the manganese oxide/biochar composites (Mn@BC) were synthesized from Phytolacca acinosa Roxb. The Mn@BC was analyzed via techniques of Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and X-ray diffraction analysis (XRD). The results show that MnOx is successfully loaded on the surface of BC, and the load of MnOx can increase the number of surface functional groups of BC. X-ray photoelectron spectroscopy (XPS) shows that MnOx loaded on BC mainly exists in three valence forms: Mn(Ⅱ), Mn(Ⅲ), and Mn(Ⅳ). The ability of Mn@BC to activate periodate (PI) was studied by simulating the degradation of methylene blue (MB) dye. The degradation experiment results showed that the MB removal rate by the Mn@BC/PI system reached 97.4% within 30 min. The quenching experiment and electron paramagnetic resonance (EPR) analysis confirmed that Mn@BC can activate PI to produce iodate (IO3•), singlet oxygen (1O2), and hydroxyl radical (•OH), which can degrade MB during the reaction. Response surface methodology (RSM) based on Box-Behnken Design (BBD) was used to determine the interaction between pH, Mn@BC and PI concentration in the Mn@BC/PI system, and the optimum technological parameters were determined. When pH = 5.4, Mn@BC concentration 0.56 mg/L, PI concentration 1.1 mmol/L, MB removal rate can reach 98.05%. The cyclic experiments show that Mn@BC can be reused. After four consecutive runs, the removal rate of MB by the Mn@BC/PI system is still 82%, and the Mn@BC/PI system also shows high performance in treating MB in actual water bodies and degrading other pollutants. This study provides a practical method for degrading dyes in natural sewage.

Tocilizumab degradation via photo-catalytic ozonation process from aqueous

Following the advent of the coronavirus pandemic, tocilizumab has emerged as a potentially efficacious therapeutic intervention. The utilization of O3-Heterogeneous photocatalytic process (O3-HPCP) as a hybrid advanced oxidation technique has been employed for the degradation of pollutants. The present study employed a solvothermal technique for the synthesis of the BiOI-MOF composite. The utilization of FTIR, FESEM, EDAX, XRD, UV-vis, BET, TEM, and XPS analysis was employed to confirm the exceptional quality of the catalyst. the study employed an experimental design, subsequently followed by the analysis of collected data in order to forecast the most favorable conditions. The purpose of this study was to investigate the impact of several factors, including reaction time (30-60 min), catalyst dose (0.25-0.5 mg/L), pH levels (4-8), ozone concentration (20-40 mMol/L), and tocilizumab concentration (10-20 mg/L), on the performance of O3-HPCP. The best model was discovered by evaluating the F-value and P-value coefficients, which were found to be 0.0001 and 347.93, respectively. In the given experimental conditions, which include a catalyst dose of 0.46 mg/L, a reaction time of 59 min, a pH of 7.0, and an ozone concentration of 32 mMol/L, the removal efficiencies were found to be 92% for tocilizumab, 79.8% for COD, and 59% for TOC. The obtained R2 value of 0.98 suggests a strong correlation between the observed data and the predicted values, indicating that the reaction rate followed first-order kinetics. The coefficient of synergy for the degradation of tocilizumab was shown to be 1.22. The catalyst exhibited satisfactory outcomes, but with a marginal reduction in efficacy of approximately 3%. The sulfate ion (SO42-) exhibited no influence on process efficiency, whereas the nitrate ion (NO3-) exerted the most significant impact among the anions. The progress of the process was impeded by organic scavengers, with methanol exhibiting the most pronounced influence and sodium azide exerting the least significant impact. The efficacy of pure BiOI and NH2-MIL125 (Ti) was diminished when employed in their pure form state. The energy consumption per unit of degradation, denoted as EEO, was determined to be 161.8 KWh/m3-order.

The photocatalytic degradation of tylosin by a trimetallic ZnCrNi/GO-layered double hydroxide in the conformation of a clustered crumb sheet

Industrial wastewater from drug production is one of the contributors to water pollution. For drug wastewater treatment, photodegradation-based chemical technology has gained more attention because of the drug's microbicidal nature and stability. A zinc-chromium-nickel trimetallic-layered double hydroxide compounding with graphene oxide catalyst (ZnCrNi/GO) was synthesized and exhibited a clustered crumb sheet morphology. The prepared catalyst was characterized by a scanning electron microscope (SEM) equipped with an energy-dispersive X-ray spectrometer (EDS), Fourier transform infrared (FTIR) spectra, and X-ray photoelectron spectroscopy (XPS). The results of material analysis established the crystallographic structures of catalysts and evidenced the successful synthesis. The ZnCrNi/GO nanohybrid revealed a higher activity of approximately 90% degradation of tolysin under high-pressure mercury lamp irradiation. The optimized condition of the catalyst dosage of 500 mg/L and the natural pH of the solution at 7.0 under the tylosin concentration of 10 mg/L with high photocatalytic efficiency was explored. In addition, the main reactive species involved in this photocatalysis degradation were explored as the active cavity h+ and ·O2- to a certain extent by the radical trapping experiments. Reuse experiments have shown that as-prepared catalysts possessed the properties of high efficiency and long-lasting catalytic performance, which could meet pharmaceutical wastewater treatment. A three-metal-layered double hydroxide composed by the metal of Ni, Zn, and Cr was synthesized and attached onto graphene oxide. The catalytic materials obtained in this way have a significant catalysis efficiency to tylosin with the likely degradation mechanism of the active cavity h+ and the oxidative capacity of hydroxyl radials.

Adsorption and photodegradation of micropollutant in wastewater by photocatalyst TiO2/rice husk biochar

With the acceleration of global industrialization, organic pollutants have become a threat to ecological safety and human health. This work prepared TiO2/rice husk biochar (TiO2/BC) for removal of bisphenol A (BA) micropollutant in wastewater. Experiment results revealed a low BA removal efficiency by TiO2/BC was observed at 34.5% under the dark environment. However, the removal rate of BA by UV light-assisted TiO2/BC significantly increased to 97.6% in 1 h. The results also demonstrated that the removal performance of BA using TiO2/BC was 2.1times higher than that of commercial TiO2 (46.4%). Besides, the removal efficiency of BA by reused TiO2/BC after eight cycles slightly decreased by 12.8%, demonstrating the excellent properties of the prepared composite. TiO2/BC also exhibited high removal efficiency of BA (over 89%) from the synthetic wastewater sample, indicating the potential utilization of composite for removing BA in wastewater. This work provides a new way to turn biomass waste into useful material and effective method to remove micropollutant BA.

Effective degradation of tetracycline via persulfate activation using silica-supported zero-valent iron: process optimization, mechanism, degradation pathways and water matrices

Pure zero-valent iron (ZVI) was supported on silica and starch to enhance the activation of persulfate (PS) for tetracycline degradation. The synthesized catalysts were characterized by microscopic and spectroscopic methods to assess their physical and chemical properties. High tetracycline removal (67.55%) occurred using silica modified ZVI (ZVI-Si)/PS system due to the improved hydrophilicity and colloidal stability of ZVI-Si. Incorporating light into the ZVI-Si/PS system improved the degradation performance by 9.45%. Efficient degradation efficiencies were recorded at pH 3-7. The optimum operating parameters determined by the response surface methodology were PS concentration of 0.22 mM, initial tetracycline concentration of 10 mg/L, and ZVI-Si dose of 0.46 g/L, respectively. The rate of tetracycline degradation declined with increasing tetracycline concentration. The degradation efficiencies of tetracycline were 77%, 76.4%, 75.7%, 74.5%, and 73.75% in five repetitive runs at pH 7, 20 mg/L tetracycline concentration, 0.5 g/L ZVI-Si dose, and 0.1 mM PS concentration. The degradation mechanism was explained, and sulfate radicals were the principal reactive oxygen species. The degradation pathway was proposed based on liquid chromatography-mass spectroscopy. Tetracycline degradation was favorable in distilled and tap water. The ubiquitous presence of inorganic ions and dissolved organic matter in the lake, drain, and seawater matrices interfered with the tetracycline degradation. The high reactivity, degradation performance, stability, and reusability of ZVI-Si substantiate the potential practical application of this material for the degradation of real industrial effluents.