Cadmium detection by a thermally responsive elastin copolymer with metal-binding functionality

Development of the efficient preparation method for thermoresponsive elastin-like peptides using liquid-phase synthesis combined with fragment condensation strategy

Elastin-like peptides (ELPs) are synthetic peptides that mimic the characteristic hydrophobic amino acid repeat sequences of elastin and exhibit temperature-dependent reversible self-assembly properties. ELPs are expected to be used as temperature-responsive biomolecular materials across diverse industrial and research fields, and there is a requirement for a straightforward method to mass-produce them. Previously, we demonstrated that phenylalanine-containing ELP analogs, namely, (FPGVG)n , can undergo coacervation with short chains (n = 5). The Fmoc solid-phase peptide synthesis method is one strategy used to synthesize these short ELPs. However, owing to its low reaction efficiency, an efficient method for preparing ELPs is required. In this study, efficient preparation of ELPs was investigated using a liquid-phase synthesis method with a hydrophobic benzyl alcohol support (HBA-tag). Because HBA-tags are highly hydrophobic, they can be easily precipitated by the addition of poor solvents and recovered by filtration. This property allows the method to combine the advantages of the simplicity of solid-phase methods and the high reaction efficiency of liquid-phase methods. By utilizing liquid-phase fragment condensation with HBA-tags, short ELPs were successfully obtained in high yield and purity. Finally, the temperature-dependent response of the ELPs generated through fragment condensation was assessed using turbidity measurements, which revealed a reversible phase transition. Consequently, the ELPs exhibited a reversible phase transition, indicating successful synthesis of ELPs via fragment preparation with tags. These findings provide evidence of the potential for mass production of ELPs using this approach.

Enhancement of Aggregate Formation Through Aromatic Compound Adsorption in Elastin-like Peptide (FPGVG)5 Analogs

Elastin-like peptides (ELPs) exhibit temperature-dependent reversible self-assembly. Repetitive sequences derived from elastin, such as Val-Pro-Gly-Val-Gly (VPGVG), are essential for the self-assembly of ELPs. Previously, we developed (FPGVG)5 (F5), in which the first valine residue in the VPGVG sequence was replaced with phenylalanine, which showed strong self-aggregation ability. This suggests that interactions through the aromatic amino acid residues of ELPs could play an important role in self-assembly. In this study, we investigated the thermoresponsive behavior of F5 analogs in the presence of aromatic compounds. Turbidimetry, spectroscopy, and fluorescence measurements demonstrated that aromatic compounds interacted with F5 analogs below the transition temperature and enhanced the self-assembly ability of ELPs by stabilizing amyloid-like structures. Furthermore, quantitative high-performance liquid chromatography analyses showed that the F5 analogs could adsorb and remove hydrophobic aromatic compounds from aqueous solutions during aggregate formation. These results suggested that the F5 analogs can be applicable as scavengers of aromatic compounds.

Development of truncated elastin-like peptide analogues with improved temperature-response and self-assembling properties

Functional peptides, which are composed of proteinogenic natural amino acids, are expected to be used as biomaterials with minimal environmental impact. Synthesizing a functional peptide with a shorter amino acid sequence while retaining its function is a easy and economical strategy. Furthermore, shortening functional peptides helps to elucidate the mechanism of their functional core region. Truncated elastin-like peptides (ELPs) are peptides consisting of repetitive sequences, derived from the elastic protein tropoelastin, that show the thermosensitive formation of coacervates. In this study, to obtain shortened ELP analogues, we synthesized several (Phe-Pro-Gly-Val-Gly)_n (FPGVG)_n analogues with one or two amino acid residues deleted from each repeat sequence, such as the peptide analogues consisting of FPGV and/or FPG sequences. Among the novel truncated ELP analogues, the 16-mer (FPGV)₄ exhibited a stronger coacervation ability than the 25-mer (FPGVG)₅. These results indicated that the coacervation ability of truncated ELPs was affected by the amino acid sequence and not by the peptide chain length. Based on this finding, we prepared Cd²⁺-binding sequence-conjugated ELP analogue, AADAAC-(FPGV)₄, and found that it could capture Cd²⁺. These results indicated that the 16-mer (FPGV)₄ only composed of proteinogenic amino acids could be a new biomaterial with low environmental impact.

Flexible customization of the self-assembling abilities of short elastin-like peptide Fn analogs by substituting N-terminal amino acids

Elastin-like peptides (ELPs) are thermoresponsive biopolymers inspired by the characteristic repetitive sequences of natural elastin. As ELPs exhibit temperature-dependent reversible self-assembly, they are expected to be biocompatible thermoresponsive materials for drug delivery carriers. One of the most widely studied ELPs in this field is the repetitive pentapeptide, (VPGXG)_n . We previously reported that phenylalanine-containing ELP (Fn) analogs, in which the former Val residue of the repetitive sequence (VPGVG)_n is replaced by Phe, show coacervation with a short chain length (n = 5). Owing to their short sequences, Fn analogs are easily modified in amino acid sequences via simple chemical synthesis, and are useful for investigating the relationship between peptide sequences and temperature responsiveness. In this study, we developed Fn analogs by replacing Phe residue(s) with other amino acids or introducing another amino acid at the N-terminus. The temperature responsiveness of the Fn analogs changed drastically with the substitution of a single Phe residue, suggesting that aromatic amino acids play an important role in their self-assembly. In addition, the self-assembling ability of Fn was enhanced by increasing the bulkiness of the N-terminal amino acids. Therefore, the N-terminal residue was considered to be important for hydrophobicity-induced intermolecular interactions between the peptides during coacervation.

Metal ion scavenging activity of elastin-like peptide analogues containing a cadmium ion binding sequence

The development of simple and safe methods for recovering environmental pollutants, such as heavy metals, is needed for sustainable environmental management. Short elastin-like peptide (ELP) analogues conjugated with metal chelating agents are considered to be useful as metal sequestering agents as they are readily produced, environment friendly, and the metal binding domain can be selected based on any target metal of interest. Due to the temperature dependent self-assembly of ELP, the peptide-based sequestering agents can be transformed from the solution state into the particles that chelate metal ions, which can then be collected as precipitates. In this study, we developed a peptide-based sequestering agent, AADAAC-(FPGVG)₄, by introducing the metal-binding sequence AADAAC on the N-terminus of a short ELP, (FPGVG)₄. In turbidity measurements, AADAAC-(FPGVG)₄ revealed strong self-assembling ability in the presence of metal ions such as Cd²⁺ and Zn²⁺. The results from colorimetric analysis indicated that AADAAC-(FPGVG)₄ could capture Cd²⁺ and Zn²⁺. Furthermore, AADAAC-(FPGVG)₄ that bound to metal ions could be readily recycled by treatment with acidic solution without compromising its metal binding affinity. The present study indicates that the fusion of the metal-binding sequence and ELP is a useful and powerful strategy to develop cost-effective heavy metal scavenging agents with low environmental impacts.

Simple Regulation of the Self-Assembling Ability by Multimerization of Elastin-Derived Peptide (FPGVG) n Using Nitrilotriacetic Acid as a Building Block

Elastin comprises hydrophobic repetitive sequences, such as Val-Pro-Gly-Val-Gly, which are thought to be important for the temperature-dependent reversible self-association (coacervation). Elastin and elastin-like peptides (ELPs), owing to their characteristics, are expected to be applied as base materials for the development of new molecular tools, such as drug-delivery system carrier and metal-scavenging agents. Recently, several studies have been reported on the dendritic or branching ELP analogues. Although the topological difference of the branched ELPs compared to their linear counterparts may lead to useful properties in biomaterials, the available information regarding the effect of branching on molecular architecture and thermoresponsive behavior of ELPs is scarce. To obtain further insight into the thermoresponsive behavior of branched ELPs, novel ELPs, such as nitrilotriacetic acid (NTA)-(FPGVG) _n conjugates, that is, (NTA)-Fn analogues possessing 1-3 (FPGVG) _n (n = 3, 5) molecule(s), were synthesized and investigated for their coacervation ability. Turbidity measurement of the synthesized peptide analogues revealed that (NTA)-Fn analogues showed strong coacervation ability with various strengths. The transition temperature of NTA-Fn analogues exponentially decreased with increasing number of residues. In the circular dichroism measurements, trimerization did not alter the secondary structure of each peptide chain of the NTA-Fn analogue. In addition, it was also revealed that the NTA-Fn analogue possesses one peptide chain that could be utilized as metal-scavenging agents. The study findings indicated that multimerization of short ELPs via NTA is a useful and powerful strategy to obtain thermoresponsive molecules.

Thermal characteristics and cadmium binding behavior of EC-ELP fusion polypeptides

Elastin-like polypeptides (ELPs) are stimulus-responsive protein-based biopolymers that exhibit phase transition behavior. By joining them to synthetic phytochelatin (EC), EC-ELP fusion proteins with temperature sensitivity and metal-binding functionality were generated to remove heavy metal ions biologically. Three different EC domains (EC₁₀, EC₂₀, EC₃₀) were incorporated into the ELP, and the EC-ELP fusion proteins were expressed in E. coli. Their thermal properties and metal binding abilities were then investigated according to the EC length. In addition, the feasibility of reusing EC-ELPs and the cadmium ion binding affinity of reused EC-ELPs were explored.

Elastin-like polypeptides as a promising family of genetically-engineered protein based polymers

Elastin-like polypeptides (ELP) are artificial, genetically encodable biopolymers, belonging to elastomeric proteins, which are widespread in a wide range of living organisms. They are composed of a repeating pentapeptide sequence Val-Pro-Gly-Xaa-Gly, where the guest residue (Xaa) can be any naturally occurring amino acid except proline. These polymers undergo reversible phase transition that can be triggered by various environmental stimuli, such as temperature, pH or ionic strength. This behavior depends greatly on the molecular weight, concentration of ELP in the solution and composition of the amino acids constituting ELPs. At a temperature below the inverse transition temperature (Tt), ELPs are soluble, but insoluble when the temperature exceeds Tt. Furthermore, this feature is retained even when ELP is fused to the protein of interest. These unique properties make ELP very useful for a wide variety of biomedical applications (e.g. protein purification, drug delivery etc.) and it can be expected that smart biopolymers will play a significant role in the development of most new materials and technologies. Here we present the structure and properties of thermally responsive elastin-like polypeptides with a particular emphasis on biomedical and biotechnological application.