Pectins as a universal medicine

High methoxyl pectin grafted onto gallic acid by one- and two-pot redox-pair procedures

The aim of this research was to graft gallic acid (GA) onto high methoxyl pectin (HMP) through the redox-pair of ascorbic acid (Aa) and hydrogen peroxide (H2O2) with one- and two-pot procedures. The effectiveness of the both procedures and the chemical, physical and antioxidant properties of the obtained HMP-GA were evaluated. HMP-GAone-pot (23.3 ± 0.21 mg GA Equivalent (GAE)/g) and HMP-GAtwo-pot (32.3 ± 0.52 mg GAE/g) were best obtained at H2O2/Aa molar ratio-HMP/GA weight ratio of 9.0-0.5 and 16.0-0.5, respectively. The UV-Vis and FT-IR spectra and along with their derivative and thermal gravimetric analyses, revealed differences between HMP-GAone-pot and HMP-GAtwo-pot. The latter exhibited a greater antioxidant capacity than the former in single electron transfer (ET), hydrogen atom transfer (HAT), and ET-HAT mixed assays. The chemical differences can be attributed to side reactions that may have interfered with the grafting reaction. Consequently, HMP-GA, possessing unique antioxidant and prebiotic properties, can be synthesized through redox-pair procedures.

Cryoprotective Effect of Pectin Tanacetan from Tanacetum vulgare L

We researched the ability of tanacetan pectin from inflorescences of common tansy Tanacetum vulgare L. to change the osmolarity and freezing point of water in solutions of cryoprotectants: glycerol-3.5%, dimethyl sulfoxide (DMSO)-10%, dimethylacetamide-10% (DMAC), and 1.2-propanediol (1.2-PD)-10%, as well as the effect of solutions of tanacetan (0.2%, 0.4%) on the kinetics of crystallization processes and the nature of crystal formation. We used a combination of protector and pectin that we tested earlier, which provided effective protection for human leukocytes and platelets, as well as bovine spermatozoa, at temperatures below freezing (-20°C and -80°C). It has been established that tanacetan slows down the process of water freezing in glycerol, but not in DMSO, DMAC, and 1.2-PD, promotes deeper supercooling of the medium, and affects the morphological structure of ice. The addition of pectin to the cryosolution increases the activity of the main cryoprotectant glycerol even at its low concentrations. The combination of glycerol and tanacetan can be effective in freezing biological materials, which is confirmed by the preservation of leukocytes at -20°C and -80°C for 7 days, platelets at -80°C for 30 days, and spermatozoa at -80°C within 1 day. A comprehensive analysis of the chemical, physicochemical, and cryoprotective properties of tanacetan indicates the prospect of using pectin in the cryopreservation of biological objects at temperatures of electric freezers.

Novel role of homogalacturonan region of pectin in disrupting the interaction between fibronectin and integrin β1

Pectin interacts with fibronectin (FN), a modular protein in the extracellular matrix. This interaction is significant as FN plays a pivotal role by binding to the receptor integrin α5β1. However, the molecular mechanism underlying the pectin-FN interaction and its impact on integrin binding remains unknown. In this study, water-soluble pectins (WSPs) were extracted from three different pectin sources and subsequently characterized. These included Citrus WSP, which primarily comprises the homogalacturonan region, and Kaki and Yuzu WSPs, both of which are rich in rhamnogalacturonan regions. We investigated the molecular interactions between these WSPs and two FN fragments, Anastellin and RetroNectin, using surface plasmon resonance analysis. Citrus WSP exhibited a notable binding affinity to FN, with a dissociation constant (KD) of approximately 10-7 M. In contrast, Kaki and Yuzu WSPs displayed comparatively weaker or negligible binding affinities. The binding reactivity of Citrus WSP with FN was notably diminished following the enzymatic removal of its methyl-ester groups. Additionally, Citrus WSP disrupted the binding of integrin β1 to RetroNectin without altering the affinity, despite its minimal direct binding to integrin itself. This study furthers our understanding of the intricate pectin-FN interaction and sheds light on their potential physiological relevance and impact on cellular responses.

Oral Treatment with the Pectin Fibre Obtained from Yellow Passion Fruit Peels Worsens Sepsis Outcome in Mice by Affecting the Intestinal Barrier

The biological activities of plant-derived soluble dietary fibres (SDFs) have been widely investigated. Pectin from yellow passion fruit (YPF-peSDF) peels was suggested as a protective macromolecule in ulcers and colitis due to its antioxidant and anti-inflammatory properties. Sepsis has high mortality and morbidity and is characterised by inflammatory and oxidative stress imbalances. Evidence suggests that pectins may aid sepsis treatment; however, the effects of YPF-peSDF on sepsis remain unclear. Herein, polymicrobial sepsis was induced by cecal-ligation and puncture in mice treated with YPF-peSDF (1 and 10 mg/kg; gavage). YPF-peSDF accelerated mortality, reaching 100% in 24 h. Inflammation was present in the colons and small intestines (SI) of both vehicle- and fibre-treated mice. Although crypt depth and width, and villus height were preserved in the SI of septic mice administered YPF-peSDF, they exhibited exacerbated muscle layer atrophy and mucosa and submucosa hypertrophy, along with shortened enterocytes. Larger crypts and shorter enterocytes were noted in their colons in comparison with vehicle-controls. YPF-peSDF also reduced inflammatory cell numbers and exacerbated IL-6 levels in peritoneal lavage fluid (PELF) samples. YPF-peSDF modulated SI but not colon cytokines. Lipoperoxidation and antioxidant capacity levels were attenuated in PELF samples. Overall, in contrast to previous evidence, YPF-peSDF worsened polymicrobial sepsis outcomes in mice.

Pectin as a Biomaterial in Regenerative Endodontics-Assessing Biocompatibility and Antibacterial Efficacy against Common Endodontic Pathogens: An In Vitro Study

Regenerative endodontics (REP) is a new clinical modality aiming to regenerate damaged soft and hard dental tissues, allowing for root completion in young adults' teeth. Effective disinfection is crucial for REP success, but commonly used antimicrobials often harm the niche dental pulp stem cells (DPSCs). To our knowledge, this is the first study to explore the biocompatibility and antimicrobial potential of pectin as a potential natural intracanal medicament for REPs. Low methoxyl commercial citrus pectin (LM) (pectin CU701, Herbstreith&Fox.de) was used in all experiments. The pectin's antibacterial activity against single species biofilms (E. faecalis and F. nucleatum) was assessed using growth curves. The pectin's antimicrobial effect against mature dual-species biofilm was also evaluated using confocal laser scanning microscopy (CLSM) after 30 min and 7 days of treatment. The DPSC biocompatibility with 2% and 4% w/v of the pectin coatings was evaluated using live/dead staining, LDH, and WST-1 assays. Pectin showed a concentration-dependent inhibitory effect against single-species biofilms (E. faecalis and F. nucleatum) but failed to disrupt dual-species biofilm. Pectin at 2% w/v concentration proved to be biocompatible with the HDPSCs. However, 4% w/v pectin reduced both the viability and proliferation of the DPSCs. Low concentration (2% w/v) pectin was biocompatible with the DPSCs and showed an antimicrobial effect against single-species biofilms. This suggests the potential for using pectin as an injectable hydrogel for clinical applications in regenerative endodontics.

Ultrasonic-assisted extraction of polysaccharide from Paeoniae Radix alba: Extraction optimization, structural characterization and antioxidant mechanism in vitro

Paeoniae Radix alba is used in Traditional Chinese Medicine for the treatment of gastrointestinal disorders, immunomodulatory, cancer, and other diseases. In the current study, the yield of Paeoniae Radix alba polysaccharide (PRP) was significantly increased with optimal ultrasound-assisted extraction compared to hot water extraction. Further, an acidic polysaccharide (PRP-AP) was isolated from PRP after chromatographic separation and was characterized as a typical pectic polysaccharide with side chains of arabinogalactans types I and II. Moreover, it showed antioxidant effects on LPS-induced damage on IPEC-J2 cells determined by qRT-PCR and ELISA, including decreasing the pro-inflammatory factors' expressions and increasing the antioxidant enzymes activities, which was shown to be related to the Nrf2/Keap1 pathway modulated by PRP-AP. The metabolites change (such as itaconate, cholesterol sulfate, etc.) detected by untargeted metabolomic analysis in cells was also shown to be modulated by PRP-AP, and these metabolites were further utilized and protected cells damaged by LPS. These results revealed the cellular active mechanism of the macromolecular PRP-AP on protecting cells, and supported the hypothesis that PRP-AP has strong benefits as an alternative dietary supplement for the prevention of intestinal oxidative stress by modulating cellular metabolism.

Anti-Apoptotic and Anti-Inflammatory Properties of Grapefruit IntegroPectin on Human Microglial HMC3 Cell Line

In this study, we investigated the beneficial effects of grapefruit IntegroPectin, derived from industrial waste grapefruit peels via hydrodynamic cavitation, on microglia cells exposed to oxidative stress conditions. Grapefruit IntegroPectin fully counteracted cell death and the apoptotic process induced by cell exposure to tert-butyl hydroperoxide (TBH), a powerful hydroperoxide. The protective effects of the grapefruit IntegroPectin were accompanied with a decrease in the amount of ROS, and were strictly dependent on the activation of the phosphoinositide 3-kinase (PI3K)/Akt cascade. Finally, IntegroPectin treatment inhibited the neuroinflammatory response and the basal microglia activation by down-regulating the PI3K- nuclear factor kappa-light-chain-enhancer of activated B cells (NF-kB)- inducible nitric oxide synthase (iNOS) cascade. These data strongly support further investigations aimed at exploring IntegroPectin's therapeutic role in in vivo models of neurodegenerative disorders, characterized by a combination of chronic neurodegeneration, oxidative stress and neuroinflammation.

Ultrasound-assisted enzymatic extraction, structural characterization, and anticancer activity of polysaccharides from Rosa roxburghii Tratt fruit

In this work, Rosa roxburghii Tratt fruit polysaccharides (RPs) were extracted by ultrasound-assisted enzymatic method. The highest extraction yield of RPs was 4.78 ± 0.10 % under the optimal extraction conditions. Two purified fractions named RP1 and RP3 were obtained and systematically characterized by a combination strategy of FT-IR, monosaccharide composition, molecular weight distribution, methylation and 2D NMR spectroscopy analyses. Structural analysis showed that the main chain of RP1 was composed of rhamnogalacturonan type I (RG-I), while the side chains were rich in arabinogalactan and galactose. RP3 was composed of long homogalacturonan (HG) backbone interspersed with alternating sequences of RG-I domains, with galactose and arabinose side chains. RP1 and RP3 induced apoptosis of MCF-7 cells in a dose dependent manner in vitro especially for RP1, and had no effect on L929 cells. Furthermore, the possible anticancer mechanisms were revealed, and results suggested that RP1 induced apoptosis through ROS-dependent pathway and mitochondrial pathway. The results of this work not only provided an efficient extraction method and theoretical basis for the application of RPs, but also may contribute to develop novel functional foods or pharmaceutical products for the prevention and treatment of human breast cancer disease.

Bioactive polysaccharides in different plant parts of Aconitum carmichaelii

BACKGROUND

Aconitum carmichaelii is an industrially cultivated medicinal plant in China and its lateral and mother roots are used in traditional Chinese medicine due to the presence of alkaloids. However, the rootlets and aerial parts are discarded after collection of the roots, and the non-toxic polysaccharides in this plant have attracted less attention than the alkaloids and poisonous features. In this study, five neutral and 14 acidic polysaccharide fractions were isolated systematically from different plant parts of A. carmichaelii, and their structural features and bioactivity were studied and compared.

RESULTS

The neutral fraction isolated from the rootlets differed from those isolated from the lateral and mother roots. It consisted of less starch and more possible mannans, galactans, and/or xyloglucans, being similar to those of the aerial parts. Pectic polysaccharides containing homogalacturonan and branched type-I rhamnogalacturonan (RG-I) were present in all plant parts of A. carmichaelii. However, more arabinogalactan (AG)-II side chains in the RG-I backbone were present in the aerial parts of the plants, while more amounts of arabinans were found in the roots. Various immunomodulatory effects were observed, determined by complement fixation activity and anti-inflammatory effects on the intestinal epithelial cells of all polysaccharide fractions.

CONCLUSION

This study highlighted the diversity of polysaccharides present in A. carmichaelii, especially in the unutilized plant parts, and showed their potential medicinal value. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Molecular weight-dependent antitumor effects of prunes-derived type I arabinogalactan on human and murine triple wild-type melanomas

The regulation of metastasis-related cellular aspects of two structurally similar AGIs from prunes tea infusion, with different molar masses, was studied in vitro against Triple Wild-Type metastatic melanoma (TWM) from murine and human origin. The higher molar mass AGI (AGI-78KDa) induced TWMs cells death and, in murine cell line, it decreased some metastasis-related cellular processes: invasiveness capacity, cell-extracellular matrix interaction, and colonies sizes. The lower molar mass AGI (AGI-12KDa) did not induce cell death but decreased TWMs proliferation rate and, in murine cell line, it decreased cell adhesion and colonies sizes. Both AGIs alter the clonogenic capacity of human cell line. In spite to understand why we saw so many differences between AGIs effects on murine and human cell lines we performed in silico analysis that demonstrated differential gene expression profiles between them. Complementary network topological predictions suggested that AGIs can modulate multiple pathways in a specie-dependent manner, which explain differential results obtained in vitro between cell lines. Our results pointed to therapeutic potential of AGIs from prunes tea against TWMs and showed that molecular weight of AGIs may influence their antitumor effects.

Biological Properties and Biomedical Applications of Pectin and Pectin-Based Composites: A Review

Pectin has recently drawn much attention in biomedical applications due to its distinctive chemical and biological properties. Polymers like pectin with cell-instructive properties are attractive natural biomaterials for tissue repair and regeneration. In addition, bioactive pectin and pectin-based composites exhibit improved characteristics to deliver active molecules. Pectin and pectin-based composites serve as interactive matrices or scaffolds by stimulating cell adhesion and cell proliferation and enhancing tissue remodeling by forming an extracellular matrix in vivo. Several bioactive properties, such as immunoregulatory, antibacterial, anti-inflammatory, anti-tumor, and antioxidant activities, contribute to the pectin's and pectin-based composite's enhanced applications in tissue engineering and drug delivery systems. Tissue engineering scaffolds containing pectin and pectin-based conjugates or composites demonstrate essential features such as nontoxicity, tunable mechanical properties, biodegradability, and suitable surface properties. The design and fabrication of pectic composites are versatile for tissue engineering and drug delivery applications. This article reviews the promising characteristics of pectin or pectic polysaccharides and pectin-based composites and highlights their potential biomedical applications, focusing on drug delivery and tissue engineering.

Polysaccharide-based antibacterial coating technologies

To tackle antimicrobial resistance, a global threat identified by the United Nations, is a common cause of healthcare-associated infections (HAI) and is responsible for significant costs on healthcare systems, a substantial amount of research has been devoted to developing polysaccharide-based strategies that prevent bacterial attachment and biofilm formation on surfaces. Polysaccharides are essential building blocks for life and an abundant renewable resource that have attracted much attention due to their intrinsic remarkable biological potential antibacterial activities. If converted into efficient antibacterial coatings that could be applied to a broad range of surfaces and applications, polysaccharide-based coatings could have a significant potential global impact. However, the ultimate success of polysaccharide-based antibacterial materials will be determined by their potential for use in manufacturing processes that are scalable, versatile, and affordable. Therefore, in this review we focus on recent advances in polysaccharide-based antibacterial coatings from the perspective of fabrication methods. We first provide an overview of strategies for designing polysaccharide-based antimicrobial formulations and methods to assess the antibacterial properties of coatings. Recent advances on manufacturing polysaccharide-based coatings using some of the most common polysaccharides and fabrication methods are then detailed, followed by a critical comparative overview of associated challenges and opportunities for future developments. STATEMENT OF SIGNIFICANCE: Our review presents a timely perspective by being the first review in the field to focus on advances on polysaccharide-based antibacterial coatings from the perspective of fabrication methods along with an overview of strategies for designing polysaccharide-based antimicrobial formulations, methods to assess the antibacterial properties of coatings as well as a critical comparative overview of associated challenges and opportunities for future developments. Meanwhile this work is specifically targeted at an audience focused on featuring critical information and guidelines for developing polysaccharide-based coatings. Including such a complementary work in the journal could lead to further developments on polysaccharide antibacterial applications.

Salvia miltiorrhiza polysaccharide and its related metabolite 5-methoxyindole-3-carboxaldehyde ameliorate experimental colitis by regulating Nrf2/Keap1 signaling pathway

The roots of Salvia miltiorrhiza have been used in Traditional Chinese Medicine for thousands of years. However, tons of aerial parts of this plant are usually discarded in the production of roots preparation. To make better use of these plant resources, the polysaccharide isolated from the aerial part of S. miltiorrhiza was investigated for its potential protection against intestinal diseases. A pectic polysaccharide (SMAP-1) was isolated and characterized being composed of homogalacturonan as the main chain and rhamnogalacturonan type I as ramified region, with side chains including arabinans and possible arabinogalactan type I and II. SMAP-1 exhibited robust protective effects against dextran sodium sulfate (DSS)-induced colitis and restored colitis symptoms, colonic inflammation, and barrier functions. Anti-oxidative effects were also observed by up-regulating Nrf2/Keap1 signaling pathway. Additionally, the level of serum 5-methoxyindole-3-carboxaldehyde (5-MC) was restored by SMAP-1 identified in metabolomic analysis, being correlated with the aforementioned effects. Protection against oxidative stress on intestinal porcine enterocyte cells (IPEC-J2) by 5-MC was observed through the activation of Nrf2/Keap1 system, as also shown by SMAP-1. In conclusion, SMAP-1 could be a promising candidate for colitis prevention, and 5-MC could be the signal metabolite of SMAP-1 in protecting against oxidative stress in the intestine.

Composition, morphology, interfacial rheology and emulsifying ability of soy hull polysaccharides extracted with ammonium oxalate and sodium citrate as extractants

BACKGROUND

Soy hull, a by-product of crop processing, is rich in pectin-like polysaccharides that have potential for thickening, gelling and emulsifying applications. The effect of ammonium oxalate (SHPA) and sodium citrate (SHPS) on the conformation, physicochemical properties and emulsifying ability of soy hull polysaccharide (SHP) were investigated.

RESULTS

The composition analysis showed that SHPS had more polysaccharide, protein, and higher molecular weight than SHPA. Images of atomic force microscopy (AFM) and scanning electron microscopy (SEM) showed that SHPS molecules appeared spherical bodies with smooth and firm surfaces, while SHPA molecules appeared chain-like bodies with rough and wrinkled surface. At the oil-water interface, SHPS adsorbed faster and formed a more elastic interfacial layer than SHPA. The characterization of the prepared emulsions showed that the SHPS emulsion was a smaller particle size and more stable system within 30 days than SHPA emulsion, especially at the SHPS concentration of 9 mg mL^-1 . Images of cryo-scanning electron microscopy (cryo-SEM) also demonstrated SHPS formed clearer network structure on the surface of the oil droplets, compared to SHPA.

CONCLUSION

Overall, ammonium oxalate and sodium citrate significantly influenced the composition and properties of the SHP. SHPS exhibited a better emulsifying ability than SHPA, which was mainly due to the higher protein content of SHPS and the sodium ion (Na⁺ ) residue of sodium citrate. This study is useful for the extraction and application of SHP and other plant-based polysaccharides. © 2023 Society of Chemical Industry.

Thiolated pectin-chitosan composites: Potential mucoadhesive drug delivery system with selective cytotoxicity towards colorectal cancer

Mucoadhesive drug delivery systems (DDS) may promote safer chemotherapy for colorectal cancer (CRC) by maximizing local drug distribution and residence time. Carbohydrate polymers, e.g. pectin (P) and chitosan (CS), are potential biomaterials for CRC-targeted DDS due to their gelling ability, mucoadhesive property, colonic digestibility, and anticancer activity. Polymer mucoadhesion is augmentable by thiolation, e.g. pectin to thiolated pectin (TP). Meanwhile, P-CS polyelectrolyte complex has been shown to improve structural stability. Herein, we fabricated, characterized, and evaluated 5-fluorouracil-loaded primary DDS combining TP and CS as a composite (TPCF) through triple crosslinking actions (calcium pectinate, polyelectrolyte complex, disulfide). Combination of these crosslinking yields superior mucoadhesion property relative to single- or dual-crosslinked counterparts, with comparable drug release profile and drug compatibility. PCF and TPCF exhibited targeted cytotoxicity towards HT29 CRC cells with milder cytotoxicity towards HEK293 normal cells. In conclusion, TP-CS composites are promising next-generation mucoadhesive and selectively cytotoxic biomaterials for CRC-targeted DDS.

Modification and application of highly active alkaline pectin lyase

Alkaline pectate lyase has developmental prospects in the textile, pulp, paper, and food industries. In this study, we selected BacPelA, the pectin lyase with the highest expression activity from Bacillus clausii, modified and expressed in Escherichia coli BL21(DE3). Through fragment replacement, the catalytic activity of the enzyme was significantly improved. The optimum pH and temperature of the modified pectin lyase (PGLA-rep4) were 11.0 and 70 °C, respectively. It also exhibited a superior ability to cleave methylated pectin. The enzyme activity of PGLA-rep4, measured at 235 nm with 0.2% apple pectin as the substrate, was 554.0 U/mL, and the specific enzyme activity after purification using a nickel column was 822.9 U/mg. After approximately 20 ns of molecular dynamics simulation, the structure of the pectin lyase PGLA-rep4 tended to be stable. The root mean square fluctuation (RMSF) values at the key catalytically active site, LYS168, were higher than those of the wildtype PGLA. In addition, PGLA-rep4 was relatively stable in the presence of metal ions. PGLA-rep4 has good enzymatic properties and activities and maintains a high pH and temperature. This study provides a successful strategy for enhancing the catalytic activity of PGLA-rep4, making it the ultimate candidate for degumming and various uses in the pulp, paper, and textile industries.

Biological investigation of a novel nanocomposite based on functionalized graphene oxide nanosheets with pectin, silk fibroin and zinc chromite nanoparticles

For biotechnology applications, a novel nanobiocomposite was synthesized based on modification of graphene oxide (GO) by extracted silk fibroin (SF), natural polymer pectin (Pec) and zinc chromite (ZnCr₂O₄) nanoparticles (NPs). The structure and properties of hybrid nanobiocomposite GO-Pec/SF/ZnCr₂O₄ such as thermal stability, less toxicity, biocompatibility, antibacterial, and biodegradable were proved by using field emission scanning electron microscope (FE-SEM), Fourier-transformed infrared (FT-IR), Energy dispersive X-ray spectroscopy (EDS), thermal gravimetric analysis (TGA), and X-Ray diffraction (XRD). According to the biological features of substances, the GO-Pec/SF/ZnCr₂O₄ nanobiocomposite shows perfect results in MTT (83.71 %) and Hemolysis (16.52 %) assays. accordingly, mentioned properties of this nanobiocomposite can be used as a scaffold for medical applications.

Current Advancements in Pectin: Extraction, Properties and Multifunctional Applications

Pectin is a heterogeneous hydrocolloid present in the primary cell wall and middle lamella in all dicotyledonous plants, more commonly in the outer fruit coat or peel as compared to the inner matrix. Presently, citrus fruits and apple fruits are the main sources for commercial extraction of pectin, but ongoing research on pectin extraction from alternate fruit sources and fruit wastes from processing industries will be of great help in waste product reduction and enhancing the production of pectin. Pectin shows multifunctional applications including in the food industry, the health and pharmaceutical sector, and in packaging regimes. Pectin is commonly utilized in the food industry as an additive in foods such as jams, jellies, low calorie foods, stabilizing acidified milk products, thickener and emulsifier. Pectin is widely used in the pharmaceutical industry for the preparation of medicines that reduce blood cholesterol level and cure gastrointestinal disorders, as well as in cancer treatment. Pectin also finds use in numerous other industries, such as in the preparation of edible films and coatings, paper substitutes and foams. Due to these varied uses of pectin in different applications, there is a great necessity to explore other non-conventional sources or modify existing sources to obtain pectin with desired quality attributes to some extent by rational modifications of pectin with chemical and enzymatic treatments.

Red Orange and Bitter Orange IntegroPectin: Structure and Main Functional Compounds

DRIFT, HPLC-MS, and SPME-GC/MS analyses were used to unveil the structure and the main functional compounds of red (blood) orange (Citrus sinensis) and bitter orange (Citrus aurantium). The IntegroPectin samples show evidence that these new citrus pectins are comprised of pectin rich in RG-I hairy regions functionalized with citrus biophenols, chiefly flavonoids and volatile molecules, mostly terpenes. Remarkably, IntegroPectin from the peel of fresh bitter oranges is the first high methoxyl citrus pectin extracted via hydrodynamic cavitation, whereas the red orange IntegroPectin is a low methoxyl pectin. C. aurantium IntegroPectin has a uniquely high concentration of adsorbed flavonoids, especially the flavanone glycosides hesperidin, naringin, and eriocitrin.

Evaluation of Extended-Release of Piroxicam Loaded Pectin-Zein Hydrogel Microspheres: In Vitro, Ex Vivo, and In Vivo Studies

OBJECTIVE

This study evaluated drug delivery systems based on Pectin (P) and Zein (Z) hydrogel microspheres. Piroxicam (Px) loaded P/Z hydrogel microspheres (P/Z HM) were developed, and their extended-release pharmacokinetic properties were evaluated.

METHODS

Experiments were executed under three different conditions: in vitro, ex vivo, and in vivo. Then, the in vitro-in vivo correlations (IVIVC) and ex vivo - in vivo correlations (EVIVC) were examined.

RESULTS

Analysis of drug release mechanisms were evaluated by fitting the in vitro data into the Ritger-Peppas equation, showing the contribution of both polymers' relaxation and drug diffusion from the hydrogel microspheres. The fraction absorbed in vivo was determined by the deconvolution of plasma concentration data using the Loo-Riegelman method. After oral single-dose administration of the two formulations, their basic independent model parameters were calculated.

CONCLUSION

P/Z HM had different drug release behaviors in in vitro and in vivo conditions. However, the ex vivo and in vivo characteristics were similar (R² = 0.99). This seemed reasonable to use the ex vivo method to predict the in vivo drug absorption behavior during the polymeric drug delivery system developmental studies. The P/Z HM formulation maintained the drug dose at the colon site for a long duration and could be applied for delivery of active pharmaceutical and food ingredients to the colon site.

Nanomaterials for application in wound Healing: current state-of-the-art and future perspectives

Nanoparticles are the gateway to the new era in drug delivery of biocompatible agents. Several products have emerged from nanomaterials in quest of developing practical wound healing dressings that are nonantigenic, antishear stress, and gas-exchange permeable. Numerous studies have isolated and characterised various wound healing nanomaterials and nanoproducts. The electrospinning of natural and synthetic materials produces fine products that can be mixed with other wound healing medications and herbs. Various produced nanomaterials are highly influential in wound healing experimental models and can be used commercially as well. This article reviewed the current state-of-the-art and briefly specified the future concerns regarding the different systems of nanomaterials in wound healing (i.e., inorganic nanomaterials, organic and hybrid nanomaterials, and nanofibers). This review may be a comprehensive guidance to help health care professionals identify the proper wound healing materials to avoid the usual wound complications.

Soybean hulls as carbohydrate feedstock for medium to high-value biomolecule production in biorefineries: A review

Soybean is one of the major world crops, with an annual production of 359 million tons. Each ton of processed soybean generates 50-80 kg of soybean hulls (SHs), representing 5-8% of the whole seed. Due to environmental concerns and great economic potential, the search of SHs re-use solutions are deeply discussed. The lignocellulosic composition of SHs has attracted the attention of the scientific and productive sector. Recently, some studies have reported the use of SHs in the production of medium to high value-added molecules, with potential applications in food and feed, agriculture, bioenergy, and other segments. This review presents biotechnological approaches and processes for the management and exploitation of SHs, including pre-treatment methods and fermentation techniques, for the production of different biomolecules. Great potentialities and innovations were found concerning SH exploration and valorisation of the soybean chain under a biorefinery and circular bioeconomy optic.

Recent advances in utilization of pectins in biomedical applications: a review focusing on molecular structure-directing health-promoting properties

The numerous health benefits of pectins justify their inclusion in human diets and biomedical products. This review provides an overview of pectin extraction and modification methods, their physico-chemical characteristics, health-promoting properties, and pharmaceutical/biomedical applications. Pectins, as readily available and versatile biomolecules, can be tailored to possess specific functionalities for food, pharmaceutical and biomedical applications, through judicious selection of appropriate extraction and modification technologies/processes based on green chemistry principles. Pectin's structural and physicochemical characteristics dictate their effects on digestion and bioavailability of nutrients, as well as health-promoting properties including anticancer, immunomodulatory, anti-inflammatory, intestinal microflora-regulating, immune barrier-strengthening, hypercholesterolemia-/arteriosclerosis-preventing, anti-diabetic, anti-obesity, antitussive, analgesic, anticoagulant, and wound healing effects. HG, RG-I, RG-II, molecular weight, side chain pattern, and degrees of methylation, acetylation, amidation and branching are critical structural elements responsible for optimizing these health benefits. The physicochemical characteristics, health functionalities, biocompatibility and biodegradability of pectins enable the construction of pectin-based composites with distinct properties for targeted applications in bioactive/drug delivery, edible films/coatings, nano-/micro-encapsulation, wound dressings and biological tissue engineering. Achieving beneficial synergies among the green extraction and modification processes during pectin production, and between pectin and other composite components in biomedical products, should be key foci for future research.

Flavonoids in Lemon and Grapefruit IntegroPectin*

Following the analysis of terpenes present in new lemon and grapefruit "IntegroPectin" pectins obtained via the hydrodynamic cavitation of industrial lemon and grapefruit processing waste, the HPLC-MS analysis of flavonoid and other phenolic compounds reveals the presence of eriocitrin, naringin, hesperidin and kaempferol typical of the respective citrus fruits. The pectic fibers rich in rhamnogalacturonan-I regions act as chemical sponges adsorbing and concentrating at their outer surface highly bioactive citrus flavonoids and terpenes. These findings, together with the unique molecular structure of these new whole citrus pectins, provide preliminary insight into the broad-scope biological activity of these new biomaterials. Numerous new biomedical applications are anticipated, including likely use in the prevention and treatment of microbial infections and neurodegenerative disease.

Protective, Antioxidant and Antiproliferative Activity of Grapefruit IntegroPectin on SH-SY5Y Cells

Tested in vitro on SH-SY5Y neuroblastoma cells, grapefruit IntegroPectin is a powerful protective, antioxidant and antiproliferative agent. The strong antioxidant properties of this new citrus pectin, and its ability to preserve mitochondrial membrane potential and morphology, severely impaired in neurodegenerative disorders, make it an attractive therapeutic and preventive agent for the treatment of oxidative stress-associated brain disorders. Similarly, the ability of this pectic polymer rich in RG-I regions, as well as in naringin, linalool, linalool oxide and limonene adsorbed at the outer surface, to inhibit cell proliferation or even kill, at high doses, neoplastic cells may have opened up new therapeutic strategies in cancer research. In order to take full advantage of its vast therapeutic and preventive potential, detailed studies of the molecular mechanism involved in the antiproliferative and neuroprotective of this IntegroPectin are urgently needed.

Potentials of Antitussive Traditional Persian Functional Foods for COVID-19 Therapy†

Coronavirus disease 2019 is a worldwide pandemic resulting in a severe acute respiratory syndrome. Remdesivir is the only FDA-approved drug for hospitalized patients older than age 12. It shows the necessity of finding new therapeutic strategies. Functional foods (FFs) could have co-therapeutic and protective effects against COVID-19 infection. Traditional Persian medicine (TPM), one of the safest and most popular schools of medicine for hundreds of years, has recommended potential FF candidates to manage such a global pandemic. To reveal the potential of TPM in terms of antitussive FFs, traditional Persian pharmacopoeia "Qarabadin-e-Salehi" was searched using the keywords "Soaal" and "Sorfeh." Also, a search of MEDLINE, PubMed Central, Google Scholar, and Science Direct was performed for the relevant literature published from the inception up to March 2021. A combination of search terms including "cough, antitussive, antioxidant, anti-inflammation, antiviral, COVID-19, mucoactive, mucolytic, expectorant, and mucoregulatory" was also applied. The potential mechanism of action in SARS-CoV-2 infection was discussed. Twelve TPM FFs were found including Laooqs, Morabbas, a Saviq, a soup, and a syrup. They are combinations of two to seven ingredients. Natural compounds of mentioned formulations have the main pharmacological mechanisms including antiviral, anti-inflammatory, antioxidant, antihistamine, bronchodilator, immunomodulatory, and mucoactive effects as well as central or peripheral antitussive activities. FFs are cost-effective, easily accessible, and safe options for both treatment and prevention of COVID-19. They might have positive psychological effects along with their pharmacological effects and nutritional virtues. They could also manage persistent respiratory discomforts after recovery from COVID-19.

Pectin in biomedical and drug delivery applications: A review

Natural macromolecules have attracted increasing attention due to their biocompatibility, low toxicity, and biodegradability. Pectin is one of the few polysaccharides with biomedical activity, consequently a candidate in biomedical and drug delivery Applications. Rhamnogalacturonan-II, a smaller component in pectin, plays a major role in biomedical activities. The ubiquitous presence of hydroxyl and carboxyl groups in pectin contribute to their hydrophilicity and, hence, to the favorable biocompatibility, low toxicity, and biodegradability. However, pure pectin-based materials present undesirable swelling and corrosion properties. The hydrophilic groups, via coordination, electrophilic addition, esterification, transesterification reactions, can contribute to pectin's physicochemical properties. Here the properties, extraction, and modification of pectin, which are fundamental to biomedical and drug delivery applications, are reviewed. Moreover, the synthesis, properties, and performance of pectin-based hybrid materials, composite materials, and emulsions are elaborated. The comprehensive review presented here can provide valuable information on pectin and its biomedical and drug delivery applications.

Structural characterization of pectin obtained by different purification methods

Commercial pectin production is based on vacuum evaporation and alcohol precipitation (VEAP) using large quantities of expensive and flammable alcohol. This process has high production costs that have greatly limited the commercial use of refined pectins. This study demonstrates a new technology using a diaultrafiltration (DUF) process in a pilot plant, which is a low-cost, green, and ecologically friendly way to produce pectin. In terms of the structure and quality of their products, a comparison of the two methods suggest that DUF provides significant (p < 0.05) flux enhancement, high pectin purity, and separation of the main pectin backbones, with higher molar mass (Mw) and less polydispersity (Mw/Mn) of pectin samples. An analysis of the 1D and 2D NMR spectra reveals that the DUF process removes most free impurities extracted along with the pectin macromolecules, making this method preferable to use. An analysis of power and chemical consumption demonstrates that the new process is preferable over existing methods due to lower energy consumption and higher product quality. It also possesses a flexible technical design that allows it to produce semi-products from various raw materials.

Physicochemical characterization and emulsifying properties evaluation of RG-I enriched pectic polysaccharides from Cerasus humilis

Rhamnogalacturonan I (RG-I) enriched pectic polysaccharides were extracted from Cerasus humilis fruits (RPCF, RG-I: 74.46 %). Structural characterization including FTIR, XRD, NMR, HPAEC and SEM demonstrated that RPCF was a high-methoxy acetylated pectin macromolecule with abundant arabinose and galactose side chains (DM: 53.41 %, MW: 1098 kDa, (Ara + Gal)/Rha: 5.37 %). RPCF afforded additional lipid oxidation stability for emulsions, and exhibited significantly better emulsification performance than citrus pectin. In addition, RPCF formed a weak gel network that stabilized the emulsions (G' > G″). Interestingly, RPCF had behaviors that are divergent from those of commercial high-methoxy pectin because it demonstrated potential in forming sugar-free gels systems. Overall, Cerasus humilis is a new source of pectin rich in RG-I. RPCF can be used as a novel emulsifier with gelling and antioxidant effects, providing its alternative application as a natural emulsifier and rheological modifier in a wide range of products, including those with oil-in-water and low sugar.

New Neuroprotective Effect of Lemon IntegroPectin on Neuronal Cellular Model

Lemon IntegroPectin obtained via hydrodynamic cavitation of organic lemon processing waste in water shows significant neuroprotective activity in vitro, as first reported in this study investigating the effects of both lemon IntegroPectin and commercial citrus pectin on cell viability, cell morphology, reactive oxygen species (ROS) production, and mitochondria perturbation induced by treatment of neuronal SH-SY5Y human cells with H2O2. Mediated by ROS, including H2O2 and its derivatives, oxidative stress alters numerous cellular processes, such as mitochondrial regulation and cell signaling, propagating cellular injury that leads to incurable neurodegenerative diseases. These results, and the absence of toxicity of this new pectic substance rich in adsorbed flavonoids and terpenes, suggest further studies to investigate its activity in preventing, retarding, or even curing neurological diseases.

Removing Pb2+ with a pectin-rich fiber from sisal waste

A pectin-rich dietary fiber from sisal waste (P-SF), containing 11.8% pectin, was produced by a sequential enzymatic-ultrasonic process. P-SF was effective in adsorbing Pb²⁺ from aqueous solution with a maximum adsorption amount of 184 mg g^-1. Adsorption isotherms were fitted well by the Langmuir equation, and the adsorption kinetics could be described by a pseudo-second-order model. X-ray photoelectron spectroscopy and energy dispersive spectroscopy suggested that Pb²⁺ was adsorbed by P-SF via ion exchange, complexation and mineral precipitation. Dietary supplementation with 10% (w/w) P-SF in basal feed led to a significant decrease in Pb²⁺ in the brain, liver and kidney. P-SF has greater in vivo efficacy of Pb²⁺ removal as compared to commercial soybean dietary fiber. The reduction of brain Pb²⁺ level by P-SF was as effective as by a Pb²⁺ excretion drug. These findings suggested that P-SF has a great potential to be used as a dietary supplement to cope with Pb²⁺ poisoning.

Volatile Compounds of Lemon and Grapefruit IntegroPectin

An HS-SPME GC-MS analysis of the volatile compounds adsorbed at the outer surface of lemon and grapefruit pectins obtained via the hydrodynamic cavitation of industrial waste streams of lemon and grapefruit peels in water suggests important new findings en route to understanding the powerful and broad biological activity of these new pectic materials. In agreement with the ultralow degree of esterification of these pectins, the high amount of highly bioactive α-terpineol and terpinen-4-ol points to limonene (and linalool) decomposition catalyzed by residual citric acid in the citrus waste peel residue of the juice industrial production.

Biorefinery Approach for Aerogels

According to the International Energy Agency, biorefinery is "the sustainable processing of biomass into a spectrum of marketable bio-based products (chemicals, materials) and bioenergy (fuels, power, heat)". In this review, we survey how the biorefinery approach can be applied to highly porous and nanostructured materials, namely aerogels. Historically, aerogels were first developed using inorganic matter. Subsequently, synthetic polymers were also employed. At the beginning of the 21st century, new aerogels were created based on biomass. Which sources of biomass can be used to make aerogels and how? This review answers these questions, paying special attention to bio-aerogels' environmental and biomedical applications. The article is a result of fruitful exchanges in the frame of the European project COST Action "CA 18125 AERoGELS: Advanced Engineering and Research of aeroGels for Environment and Life Sciences".

An Overview of Biopolymeric Electrospun Nanofibers Based on Polysaccharides for Wound Healing Management

Currently, despite the thoroughgoing scientific research carried out in the area of wound healing management, the treatment of skin injuries, regardless of etiology remains a big provocation for health care professionals. An optimal wound dressing should be nontoxic, non-adherent, non-allergenic, should also maintain a humid medium at the wound interfacing, and be easily removed without trauma. For the development of functional and bioactive dressings, they must meet different conditions such as: The ability to remove excess exudates, to allow gaseous interchange, to behave as a barrier to microbes and to external physical or chemical aggressions, and at the same time to have the capacity of promoting the process of healing by stimulating other intricate processes such as differentiation, cell adhesion, and proliferation. Over the past several years, various types of wound dressings including hydrogels, hydrocolloids, films, foams, sponges, and micro/nanofibers have been formulated, and among them, the electrospun nanofibrous mats received an increased interest from researchers due to the numerous advantages and their intrinsic properties. The drug-embedded nanofibers are the potential candidates for wound dressing application by virtue of: Superior surface area-to volume ratio, enormous porosity (can allow oxy-permeability) or reticular nano-porosity (can inhibit the microorganisms'adhesion), structural similitude to the skin extracellular matrix, and progressive electrospinning methodology, which promotes a prolonged drug release. The reason that we chose to review the formulation of electrospun nanofibers based on polysaccharides as dressings useful in wound healing was based on the ever-growing research in this field, research that highlighted many advantages of the nanofibrillary network, but also a marked versatility in terms of numerous active substances that can be incorporated for rapid and infection-free tissue regeneration. In this review, we have extensively discussed the recent advancements performed on electrospun nanofibers (eNFs) formulation methodology as wound dressings, and we focused as well on the entrapment of different active biomolecules that have been incorporated on polysaccharides-based nanofibers, highlighting those bioagents capable of improving the healing process. In addition, in vivo tests performed to support their increased efficacy were also listed, and the advantages of the polysaccharide nanofiber-based wound dressings compared to the traditional ones were emphasized.