A novel SERS-based aptasensor for ultrasensitive sensing of microcystin-LR

Application of aptamer-conjugated graphene oxide for specific enrichment of microcystin-LR in Achatina fulica prior to matrix-assisted laser desorption ionization mass spectrometry

Microcystin-LR (MC-LR), as a hepatotoxin, can cause liver swelling, hepatitis, and even liver cancer. In this study, MC-LR aptamer (Apt-3) modified graphene oxide (GO) was designed to enrich MC-LR in white jade snail (Achatina fulica) and pond water, followed by matrix-assisted laser desorption ionization mass spectrometry (MALDI-MS) analysis. Results indicated that the Apt-3/PEG/GO nanocomposites were highly specific to MC-LR, and the detection limit of MALDI-MS was 0.50 ng/mL. Moreover, the MC-LR can be released from nanocomposites at 75°C, thus, the reuse of Apt-3/PEG/GO is realized. Real sample analysis indicated that the Apt-3/PEG/GO nanocomposites coupled with MALDI-MS were efficient in detecting trace amounts of MC-LR in real samples. With the merits of being low cost, reusable, and easy to besynthesized, this Apt-3/PEG/GO MALDI-MS is expected to be comprehensively applied by anchoring suitable aptamers for different targets.

Ultra-sensitive detection of tumor necrosis factor alpha based on silver-coated gold core shell and magnetically separated recognition of SERS aptamer sensors

A highly sensitive tumor necrosis factor α (TNF-α) detection method based on a surface-enhanced Raman scattering (SERS) magnetic patch sensor is reported. Magnetic beads (MNPs) and core shells were used as the capture matrix and signaling probe, respectively. For this purpose, antibodies were immobilized on the surface of magnetic beads, and then Au@4-MBN@Ag core-shell structures coupled with aptamers and TNF-α antigen were added sequentially to form a sandwich immune complex. Quantitative analysis was performed by monitoring changes in the characteristic SERS signal intensity of the Raman reporter molecule 4-MBN. The results showed that the limit of detection (LOD) of the proposed method was 4.37 × 10-15 mg·mL-1 with good linearity (R2 = 0.9918) over the concentration range 10-12 to 10-5 mg·mL-1. Excellent assay accuracy was also demonstrated, with recoveries in the range 102% to 114%. Since all reactions occur in solution and are separated by magnetic adsorption of magnetic beads, this SERS-based immunoassay technique solves the kinetic problems of limited diffusion and difficult separation on solid substrates. The method is therefore expected to be a good clinical tool for the diagnosis of the inflammatory biomarker THF-α and in vivo inflammation screening.

Electrochemical biosensor using SnO2 colloidal quantum wire for monitoring the interaction of microcystin antigen-antibody

Electrochemical sensors that incorporate immunoassay principles have the ability to monitor dynamic processes of antigen-antibody interactions in real time. In this study, a gold electrode was modified with tin dioxide colloidal quantum wire (SnO2 QWs) and then coated with the leucine/arginine subtype microcystin (MC-LR) antibody. The active site of SnO2 QWs that was not bound by MC-LR antibody was then passivated with bovine serum protein (BSA). When the MC-LR antigen binds specifically to the antibodies on the electrode's surface, it triggers electrochemical reactions and generates electrical signals at specific voltage conditions. The SnO2 QW exhibits excellent electron transport ability, and its ability to form a loose and porous microstructure on the gold electrode surface, which is conducive to the receptor function of the biosensor. The results show a high affinity between the MC-LR antigen and antibody, ranging from 1 pg/mL to 10 ng/mL of MC-LR antigen concentration. The kinetic characteristics of the immune reaction between MC-LR antigen and antibody were elucidated, obtaining a binding constant of 1.399 × 1011 M-1 and a dissociation constant of 7.147 pM, demonstrating the potential of electrochemical biosensing technology in biomolecular interactions.

Advances in surface-enhanced Raman spectroscopy-based sensors for detection of various biomarkers

Surface enhanced Raman spectroscopy (SERS) allows the ultrasensitive detection of analytes present in traces or even single molecule levels by the generation of electromagnetic fields. It is a powerful vibrational spectroscopic method that is capable to detect traces of chemical and biological analytes. SERS technique is involved in the extremely sophisticated studies of molecules with high specificity and sensitivity. In the vicinity of nanomaterials decorated surfaces, SERS can monitor extremely low concentrations of analytes in a non-destructive manner with narrow line widths. This review article is focused on some recently developed SERS-based sensors for distinct types of analytes like disease-related biomarkers, organic and inorganic molecules, various toxins, dyes, pesticides, bacteria as well as single molecules. This study aims to enlighten the arising sensing approaches based on the SERS technique. Apart from this, some basics of the SERS technique like their mechanism, detection strategy, and involvement of some specific nanomaterials are also highlighted herein. Finally, the study concluded with some discussion of applications of SERS in various fields like food and environmental analysis.

SERS immuno- and apta-assays in biosensing/bio-detection: Performance comparison, clinical applications, challenges

Surface Enhanced Raman Spectroscopy is increasingly used as a sensitive bioanalytical tool for detection of variety of analytes ranging from viruses and bacteria to cancer biomarkers and toxins, etc. This comprehensive review describes principles of operation and compares the performance of immunoassays and aptamer assays with Surface Enhanced Raman scattering (SERS) detection to each other and to some other bioassay methods, including ELISA and fluorescence assays. Both immuno- and aptamer-based assays are categorized into assay on solid substrates, assays with magnetic nanoparticles and assays in laminar flow or/and strip assays. The best performing and recent examples of assays in each category are described in the text and illustrated in the figures. The average performance, particularly, limit of detection (LOD) for each of those methods reflected in 9 tables of the manuscript and average LODs are calculated and compared. We found out that, on average, there is some advantage in terms of LOD for SERS immunoassays (0.5 pM median LOD of 88 papers) vs SERS aptamer-based assays (1.7 pM median LOD of 51 papers). We also tabulated and analyzed the clinical performance of SERS immune and aptamer assays, where selectivity, specificity, and accuracy are reported, we summarized the best examples. We also reviewed challenges to SERS bioassay performance and real-life application, including non-specific protein binding, nanoparticle aggregation, limited nanotag stability, sometimes, relatively long time to results, etc. The proposed solutions to those challenges are also discussed in the review. Overall, this review may be interesting not only to bioanalytical chemist, but to medical and life science researchers who are interested in improvement of bioanalyte detection and diagnostics.

Bioinspired polydopamine-mediated metal-organic framework click-grafting aptamers functionalized fabric for highly-specific recognition of microcystin-leucine arginine

Fabricating functional electrospun nanofiber coating for highly selective extraction of microcystin-LR (MC-LR) was of significant importance for water-safety monitoring. Herein, a novel MOF@aptamer functionalized nanofabric was presented via a facile and reliable strategy integrating polydopamine (PDA) mediation and thiol-ene chemistry and applied for specific recognition of the MC-LR model analyte. Using polydopamine (PDA) as the mediating layer, vinyl-UiO-66 MOF was grown in situ, followed by post-synthetic modification (PSM) of Zr⁴⁺ with vinyl phosphate and rapid UV-initiated click reaction of aptamers. Uniform deposition of Zr-based MOF (vinyl-UiO-66) on the nanofibers was directly produced, and the tedious co-electrospinning process was abandoned to prevent the aggregation and encapsulation of MOF. Via an efficient "thiol-ene" chemistry, massive thiol-terminated aptamers were grafted on MOF within one step under friendly conditions, rather than the time-consuming nanoparticle adsorption or unfriendly covalent chemical reactions. As a result, the robust MOF@aptamer-coated nano-fabrics were obtained, and a highly selective performance towards MC-LR was illustrated with a limit of detection (LOD) at 0.002 ng/mL, good precision (CV<8.3%), good repeatability (2.2∼6.0%) when coupled with LC-MS. Almost 1∼2 orders of magnitude higher detection sensitivity was exhibited than that of the common non-specific SPE/SPME fiber reported so far. Applied to water samples, the good matrix-resistance ability, and acceptable recovery yields were achieved with high specificity. This strategy might provide a rapid and friendly protocol to efficiently fabricate MOF@aptamer functionalized nano-fabrics through electrospinning and interfacial "thiol-ene" chemistry for highly-selective microextraction.

Study of microplastics as sorbents for rapid detection of multiple antibiotics in water based on SERS technology

Online monitoring of antibiotics in the environment attracts more and more attention. Surface-enhanced Raman scattering (SERS) is a promising technique for the detection of trace amounts of antibiotics in the environment, which is fast, non-invasive and sensitive. To investigate the enrichment of trace amounts of antibiotics in water, polyethylene microplastics (PE MPs) were prepared as sorbents to simply concentrate enrofloxacin, ciprofloxacin hydrochloride monohydrate and triclosan in water, followed by the SERS measurement of antibiotics extract washed from MPs on an AgNPs@Si SERS substrate. Limit of detection of Rhodamine 6G is 2.1 × 10^-12 M achieved from the AgNPs@Si SERS, indicating a high enhancement. The detection results show that SERS peaks of the antibiotics could be observed from the spectra of the extracts eluted from MPs, indicating MPs could adsorb and desorb antibiotics from water. Besides, for enrofloxacin and triclosan, the intensity of SERS measured from the MPs extracts are higher than that of directly from the spiked water, demonstrating the proposed method could lower the detectable concentration of hydrophobic antibiotics in water. Moreover, the proposed MPs sorbents combined with SERS method was applied to detect the antibiotics in real river water, with minimal detection of 10^-10 M, 10^-8 M, and 10^-8 M achieved for enrofloxacin, ciprofloxacin hydrochloride monohydrate and triclosan, respectively. The proposed method provides a promising simple, rapid and low reagent consuming means for monitoring antibiotics in water.

Ultrasensitive Aptasensor for Microcystin-LR Detection in Food Samples Based on Target-Activated Assembly of Y-Shaped Hairpin Probes

As a kind of algal toxin, microcystin-LR (MC-LR) causes a tremendous treat to food safety and the detection of trace levels of MC-LR is highly desirable. Herein, we developed an ultrasensitive aptasensor for MC-LR detection based on target-activated assembly of Y-shaped hairpins. The aptamer-target recognition initiates the assembly step between two Y-shaped hairpin probes through toehold-mediated DNA replacement. One of the hairpins was modified with FAM and BHQ. Through cyclic assembly reactions, a high fluorescence signal can be observed in the product. The detection limit is 0.2 pM for MC-LR detection. In addition, the biosensor is robust and has been successfully explored to assess the MC-LR concentrations in real fish and water samples with satisfactory recovery rates and good accuracy. The signal amplification can be gained through the cyclic Y-shaped hairpin assembly, which offers a simple, ultrasensitive, and reliable method for MC-LR monitoring in food samples.

Fabrication and Characterization of the Egg-White Protein Chitosan Double-Layer Emulsion

Egg-white protein has an abundance of hydrophobic amino acids and could be a potential emulsifier after modification. Here, egg-white protein was modified via ultrasonic and transglutaminase treatments to destroy the globular structure. The egg-white protein gel particles (EWP-GPs) were prepared and then a novel highly stable EWP-chitosan double-layer emulsion was constructed. When ultrasonic treatment was applied at 240 W and TGase (20 U/g EWP) treatment, the EWP-GPs had a low particle size and good emulsification performance. The particle size of EWP-GPs was a minimum of 287 nm, and the polymer dispersity index (PDI) was 0.41. The three-phase contact angle (θ_o/w) of EWP-GPs was 79.6° (lower than 90°), performing with good wettability. Based on these results, the EWP-chitosan double-layer emulsion was prepared through the EWP-GPs being treated with 240 W ultrasound, TGase, and chitosan in this study. When the double-layer emulsion had 0.6% (v/v) chitosan, the zeta potential of the double-layer emulsion was -1.1 mV and the double-layer emulsion had a small particle size (56.87 µm). The creaming index of double-layer emulsion at 0.6% (v/v) chitosan was 16.3% and the droplets were dispersed uniformly. According to the rheological results, the storage modulus (G') was larger than the loss modulus (G″) in the whole frequency, indicating the formation of an elastic gel network structure in the emulsion. It is hoped to develop a novel food-grade stabilizer and a stable double-layer emulsion, providing new environment-friendly processing in hen egg products and delivery systems.

Recent advances in nanomaterials-based optical and electrochemical aptasensors for detection of cyanotoxins

The existence of cyanotoxins poses serious threats to human health, it is highly desirable to develop specific and sensitive methods for rapid detection of cyanotoxins in food and water. Due to the distinct advantages of aptamer including high specificity, good stability and easy preparation, various aptamer-based sensors (aptasensors) have been proposed to promote the detection of cyanotoxins. In this review, we summarize recent advance in optical and electrochemical aptasensors for cyanotoxins sensing by integrating with versatile nanomaterials or innovative sensing strategies, such as colorimetric aptasensors, fluorescent aptasensors, surface enhancement Raman spectroscopy-based aptasensors, voltammetric aptasensors, electrochemical impedance spectroscopy-based aptasensors and photoelectrochemical aptasensors. We highlight the accomplishments and advancements of aptasensors with improved performance. Furthermore, the current challenges and future prospects in cyanotoxins detection are discussed from our perspectives, which we hope to provide more ideas for future researchers.

CRISPR-Cas12a-Based Aptasensor for On-Site and Highly Sensitive Detection of Microcystin-LR in Freshwater

On-site monitoring of trace organic pollutants with facile methods is critical to environmental pollutant prevention and control. Herein, we proposed a CRISPR-Cas12a-based aptasensor platform (named as MC-LR-Casor) for on-site and sensitive detection of microcystin-LR (MC-LR). After hybridization with blocker DNA, the MC-LR aptamers were conjugated to magnetic beads (MBs) to get the MB aptasensor. In the presence of MC-LR, their interactions with aptamers were triggered and the specific binding caused the release of blocker DNA. Using the programmability of the CRISPR-Cas system, the released blocker DNA was designed to activate a Cas12a-crRNA complex. Single strand DNA reporters were rapidly cleaved by the complex. Signal readout could be achieved by fluorometer or lateral flow strips, which were positively correlated to MC-LR concentration. Benefiting from the CRISPR-Cas12a amplification system, the proposed sensing platform exhibited high sensitivity and reached the limit of detection of ∼3 × 10^-6 μg/L (fluorescence method) or 1 × 10^-3 μg/L (lateral flow assay). In addition, the MC-LR-Casor showed excellent selectivity and good recovery rates, demonstrating their good applicability for real water sample analysis. During the whole assay, only two steps of incubation at a constant temperature were required and the results could be visualized when employing flow strips. Therefore, the proposed assay offered a simple and convenient alternative for in situ MC-LR monitoring, which may hold great promise for future environmental surveillance.

Immunoassay technology: Research progress in microcystin-LR detection in water samples

Increasing global warming and eutrophication have led to frequent outbreaks of cyanobacteria blooms in freshwater. Cyanobacteria blooms cause the death of aquatic and terrestrial organisms and have attracted considerable attention since the 19th century. Microcystin-LR (MC-LR) is one of the most typical cyanobacterial toxins. Therefore, the fast, sensitive, and accurate determination of MC-LR plays an important role in the health of humans and animals. Immunoassay refers to a method that uses the principle of immunology to determine the content of the tested substance in a sample using the tested substance as an antigen or antibody. In analytical applications, the immunoassay technology could use the specific recognition of antibodies for MC-LR detection. In this review, we firstly highlight the immunoassay detection of MC-LR over the past two decades, including classical enzyme-link immunosorbent assay (ELISA), modern immunoassay with optical signal, and modern immunoassay with electrical signal. Among these detection methods, the water environment was used as the main detection system. The advantages and disadvantages of the different detection methods were compared and analyzed, and the principles and applications of immunoassays in water samples were elaborated. Furthermore, the current challenges and developmental trends in immunoassay were systematically introduced to enhance MC-LR detection performance, and some critical points were given to deal with current challenges. This review provides novel insight into MC-LR detection based on immunoassay method.

Ultrasensitive detection of plant hormone abscisic acid-based surface-enhanced Raman spectroscopy aptamer sensor

Abscisic acid (ABA), as the most common plant hormone in the growth of wheat, can greatly affect the yield when its levels deviate from normal. Therefore, highly sensitive and selective detection of this hormone is greatly needed. In this work, we developed an aptamer sensor based on surface-enhanced Raman spectroscopy (SERS) and applied it for the high sensitivity detection of ABA. Biotin-modified ABA aptamer complement chains were modified on ferrosoferric oxide magnetic nanoparticles (Fe₃O₄MNPs) and acted as capture probes, and sulfhydryl aptamer (SH-Apt)-modified silver-coated gold nanospheres (Au@Ag NPs) were used as signal probes. Through the recognition of the ABA aptamer and its complementary chains, an aptamer sensor based on SERS was constructed. As SERS internal standard molecules of 4-mercaptobenzoic acid (4-MBA) were encapsulated between the gold core and silver shell of the signal probes; the constructed aptamer sensor generated a strong SERS signal of 4-MBA after magnetic separation. When there were ABA molecules in the detection system, with the preferential binding of ABA aptamer and ABA molecule, the signal probes were released from the capture probes, after magnetic separation, leading to a linear decrease in SERS intensity of 4-MBA. Thus, the detection response was linear over a logarithmic concentration range, with an ultra-low detection limit of 0.67 fM. In addition, the practical use of this assay method was demonstrated in ABA detection from fresh wheat leaves, with a relative error (RE) of 5.43-8.94% when compared with results from enzyme-linked immunosorbent assay (ELISA). The low RE value proves that the aptamer sensor will be a promising method for ABA detection.

Ultrasensitive and facile detection of multiple trace antibiotics with magnetic nanoparticles and core-shell nanostar SERS nanotags

Ultrasensitive, multiplex, rapid, and accurate quantitative determination of trace antibiotics remains a challenging issue, which is of importance to public health and safety. Herein, we presented a multiplex strategy based on magnetic nanoparticles and surface-enhanced Raman scattering (SERS) nanotags for simultaneous detection of chloramphenicol (CAP) and tetracycline (TTC). In practice, SERS nanotags based on Raman reporter probes (RRPs) encoded gold-silver core-shell nanostars were used as detection labels for identifying different types of antibiotics, and the magnetic nanoparticles could be separated simply by magnetic force, which significantly improves the detection efficiency, reduces the analysis cost, and simplifies the operation. Our results demonstrate that the as-proposed assay possesses the capacities of high sensitivity and multiplexing with the limits of detection (LODs) for CAP and TTC of 159.49 and 294.12 fg mL^-1, respectively, as well as good stability and reproducibility, and high selectivity and reliability. We believe that this strategy holds a great promising perspective for the detection of trace amounts of antibiotics in microsystems, which is crucial to our life. Additionally, the assay can also be used to detect other illegal additives by altering the appropriate antibodies or aptamers.

Improving Biosensors by the Use of Different Nanomaterials: Case Study with Microcystins as Target Analytes

The eutrophication of lakes and rivers without adequate rainfall leads to excessive growth of cyanobacterial harmful algal blooms (CyanoHABs) that produce toxicants, green tides, and unpleasant odors. The rapid growth of CyanoHABs owing to global warming, climate change, and the development of rainforests and dams without considering the environmental concern towards lakes and rivers is a serious issue. Humans and livestock consuming the toxicant-contaminated water that originated from CyanoHABs suffer severe health problems. Among the various toxicants produced by CyanoHABs, microcystins (MCs) are the most harmful. Excess accumulation of MC within living organisms can result in liver failure and hepatocirrhosis, eventually leading to death. Therefore, it is essential to precisely detect MCs in water samples. To date, the liquid chromatography-mass spectrometry (LC-MS) and enzyme-linked immunosorbent assay (ELISA) have been the standard methods for the detection of MC and provide precise results with high reliability. However, these methods require heavy instruments and complicated operation steps that could hamper the portability and field-readiness of the detection system. Therefore, in order for this goal to be achieved, the biosensor has been attracted to a powerful alternative for MC detection. Thus far, several types of MC biosensor have been proposed to detect MC in freshwater sample. The introduction of material is a useful option in order to improve the biosensor performance and construct new types of biosensors. Introducing nanomaterials to the biosensor interface provides new phenomena or enhances the sensitivity. In recent times, different types of nanomaterials, such as metallic, carbon-based, and transition metal dichalcogenide-based nanomaterials, have been developed and used to fabricate biosensors for MC detection. This study reviews the recent advancements in different nanomaterial-based MC biosensors.

The isolation of high-affinity ssDNA aptamer for the detection of ribavirin in chicken

The abuse of ribavirin, an antiviral drug, in poultry breeding can cause quality degradation and drug resistance. So it is of great importance to establish a simple and effective method for detecting ribavirin in foods. In this work, aptamers that could especially bind to ribavirin with high affinity were obtained by the Capture-SELEX method. After 15 rounds of enrichment, ssDNA library pool was enriched and then analyzed by high-throughput sequencing. The seven most enriched sequences were selected as candidate aptamers for affinity and specificity characterization. Among the candidate aptamers, APT-1 was proved to be the optimal aptamer. The dissociation constant (K_d) values of APT-1 obtained by the two methods of colorimetric and fluorescence were 34.34 ± 6.038 nmol L^-1, 61.19 ± 21.48 nmol L^-1, respectively. To study the binding mechanism of the selected aptamer, molecular docking was conducted and results indicated that hydrogen bonds were formed at binding sites located at G37, T38, A40, T53 and A54. Furthermore, to confirm the practicability of the selected aptamer, a fluorescence assay was designed, showing the liner range within 1.0-50 ng mL^-1 and the low detection limit of 0.67 ng mL^-1. Besides, the aptamer was applied for the detection of ribavirin in chicken samples and the recoveries ranged from 87.26% to 105.57%, which showed great application potential in food safety.

DNA nanotechnology: A recent advancement in the monitoring of microcystin-LR

The Microcystin-Leucine-Arginine (MC-LR) is the most toxic and widely distributed microcystin, which originates from cyanobacteria produced by water eutrophication. The MC-LR has deleterious effects on the aquatic lives and agriculture, and this highly toxic chemical could severely endanger human health when the polluted food was intaken. Therefore, the monitoring of MC-LR is of vital importance in the fields including environment, food, and public health. Utilizing the complementary base pairing between DNA molecules, DNA nanotechnology can realize the programmable and predictable regulation of DNA molecules. In analytical applications, DNA nanotechnology can be used to detect targets via target-induced conformation change and the nano-assemblies of nucleic acids. Compared with the conventional analytical technologies, DNA nanotechnology has the advantages of sensitive, versatile, and high potential in real-time and on-site applications. According to the molecular basis for recognizing MC-LR, the strategies of applying DNA nanotechnology in the MC-LR monitoring are divided into two categories in this review: DNA as a recognition element and DNA-assisted signal processing. This paper introduces state-of-the-art analytical methods for the detection of MC-LR based on DNA nanotechnology and provides critical perspectives on the challenges and development in this field.

Microextraction based on microplastic followed by SERS for on-site detection of hydrophobic organic contaminants, an indicator of seawater pollution

Microplastics (MPs) have been proven to concentrate hydrophobic organic contaminants (HOCs) from seawater as the sorbent phase, and the concentration of HOCs in aqueous solutions could be estimated from MPs preloaded with HOCs by equilibrium partition coefficient. This study firstly proposed to in situ quantify fluoranthene (a representative HOCs) pre-concentrated on MPs using surface enhance raman scattering (SERS) in combination with mathematical models, as an efficient monitoring tool for fluoranthene pollution in the aquatic environment. AgNPs-coated quartz (AgNPs@SiO2) substrate was fabricated. The SERS substrate was tested using fluoranthene standard solution with the minimal detectable concentration of 1 ng/mL achieved. Applying SERS for the detection of fluoranthene sorbed on MPs, the detection limit of fluoranthene on MPs was 3.3 ng/g, where the concentration in the corresponding equilibrium seawater was 0.97 ng/mL. Since more than one fluoranthene peak was observed, the quantitative detection was investigated by interval partial least square model. Eight characteristic peak ranges were selected to develop the model for predicting fluoranthene concentration, with R²c and R²v of 0.90 and 0.82, respectively. The study provides a promising solution to monitor trace level of contaminations in aquatic environment, using MPs as the passive sampler.

A Mini-Review on Detection Methods of Microcystins

Cyanobacterial harmful algal blooms (CyanoHABs) produce microcystins (MCs) which are associated with animal and human hepatotoxicity. Over 270 variants of MC exist. MCs have been continually studied due of their toxic consequences. Monitoring water quality to assess the presence of MCs is of utmost importance although it is often difficult because CyanoHABs may generate multiple MC variants, and their low concentration in water. To effectively manage and control these toxins and prevent their health risks, sensitive, fast, and reliable methods capable of detecting MCs are required. This paper aims to review the three main analytical methods used to detect MCs ranging from biological (mouse bioassay), biochemical (protein phosphatase inhibition assay and enzyme linked immunosorbent assay), and chemical (high performance liquid chromatography, liquid chromatography-mass spectrometry, high performance capillary electrophoresis, and gas chromatography), as well as the newly emerging biosensor methods. In addition, the current state of these methods regarding their novel development and usage, as well as merits and limitations are presented. Finally, this paper also provides recommendations and future research directions towards method application and improvement.

Trimer-based aptasensor for simultaneous determination of multiple mycotoxins using SERS and fluorimetry

An aptasensor is reported for the detection of three different kinds of mycotoxins, i.e., zearalenone (ZEN), ochratoxin A (OTA), and fumonisin B1 (FB1). Based on fluorescence resonance energy transfer effect (FRET) and surface-enhanced Raman scattering (SERS), the levels of ZEN, FB1, and OTA can be simultaneously determined. Under 980-nm and 650-nm laser excitation, the logarithmic values of fluorescence signal intensities at 543 nm and 670 nm are slowly increased as the concentrations of ZEN and OTA vary from 0.1 ng mL^-1 and 0.05 ng mL^-1 to 100 ng mL^-1 and 25 ng mL^-1, respectively. For FB1, under 980-nm laser excitation, the logarithmic value of SERS signal intensity at 1567 cm^-1 gradually increases with the concentration of FB1 in the range 0.05-200 pg mL^-1 (R² = 0.996). The detection limits of the proposed assay for ZEN, OTA, and FB1 are 0.03 ng mL^-1, 0.01 ng mL^-1, and 0.02 pg mL^-1, respectively. The selectivity experiment results indicate this assay possesses a high selectivity over other commonly encountered mycotoxins. The average recoveries range from 90 to 107%, revealing satisfactory application potential of the proposed assay. The developed aptasensor will bring bright prospects for research in the field of multiplexed mycotoxine detection. Graphical Abstract Schematic representation of an aptamer-based assay for multiple mycotoxins determination.

A Fluorescence and Surface-Enhanced Raman Spectroscopic Dual-Modal Aptasensor for Sensitive Detection of Cyanotoxins

The ability to detect trace analytes without necessitating solid surface attachment or complicated processing steps would facilitate the translation of sensors for monitoring environmental toxins in the field. To address a critical unmet need in fresh water ecology, we have developed a dual-modal aptamer-based biosensor (aptasensor), featuring fluorescence and surface-enhanced Raman spectroscopy (SERS), for sensitive and selective detection of hepatotoxin microcystin-LR (MC-LR). The rational sensor design is based on the high affinity of the cyanine (Cy3) dye-modified complementary DNA (Cy3-cDNA) strand toward the plasmonic gold nanostars (GNSs) in comparison to the Cy3-cDNA/aptamer duplex. The preferential binding of MC-LR toward the MC-LR-specific aptamer triggers the dissociation of Cy3-cDNA/aptamer duplexes, which switches the Cy3's fluorescence "off" and SERS "on" due to the proximity of Cy3 dye to the GNS surface. Both fluorescence and SERS intensities are observed to vary linearly with the MC-LR concentration over the range of investigation. We have achieved high sensitivity and excellent specificity with the aptasensor toward MC-LR, which can be attributed to the fluorescence quenching effect, significant SERS enhancement by the GNSs, and the high affinity of the aptamer toward the MC-LR analytes. We further demonstrate the applicability of the present aptasensor for detection of MC-LR in a diverse set of real water samples with high accuracy and excellent reproducibility. With further refinement, we believe that the aptamer-driven complementary assembly of the SERS and fluorescence sensing constructs can be applied for rapid, multiplexed, and robust measurements of environmental toxins in the field.

A fluorometric method for aptamer-based simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B1 making use of gold nanorods and upconversion nanoparticles

An aptamer-based assay for the determination of two different kinds of fusarium mycotoxins, i.e., zearalenone (ZEN) and fumonisin B₁ (FB₁), is presented. Based on the inner filter effect (IFE) strategy, the contents of ZEN and FB₁ can be simultaneously quantified. It is making use of 65-nm gold nanorods (AuNRs), 20-nm upconversion nanoparticles (UCNPs), fluorescence dyes, and DNA sequences. In the absence of ZEN and FB₁, the UCNPs and AuNRs associate through DNA sequences. Due to IFE effect, weak fluorescence signals are collected. In the presence of ZEN or FB₁, UCNPs and AuNRs become unstable and partially separate from each other. This results in the recovery of fluorescence signals. Under 980-nm laser excitation, the logarithmic values of fluorescence signal intensities at 606 nm and 753 nm gradually increase with the concentration of ZEN and FB₁ in the ranges 0.05-100 μg L^-1 (the coefficient of determination is 0.997) and 0.01-100 ng L^-1 (the coefficient of determination is 0.986), respectively. The limits of detection (LOD) of the fabricated assay for ZEN and FB1 are 0.01 μg L^-1 and 0.003 ng L^-1, respectively. The proposed method has a high selectivity over other competitive mycotoxins, including aflatoxin B1, ochratoxin A, patulin and ochratoxin B. The applicability of the assay was evaluated in the determination of ZEN and FB1 contents in spiked corn samples. The average recoveries ranged from 89.9 to 106.6%. This result confirms the practicality of this method. Graphical abstract Schematic representation of an aptamer-based fluorometric method for simultaneous determination of two kinds of the fusarium mycotoxins zearalenone and fumonisin B₁.

A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies

One of the most studied topics in analytical chemistry and physics is to develop bio-sensors. Aptamers are small single-stranded RNA or DNA oligonucleotides (5-25 kDa), which have advantages in comparison to their antibodies such as physicochemical stability and high binding specificity. They are able to integrate with proteins or small molecules, including intact viral particles, plant lectins, gene-regulation factor, growth factors, antibodies and enzymes. The aptamers have reportedly shown some unique characteristics, including long shelf-life, simple modification to provide covalent bonds to material surfaces, minor batch variation, cost-effectiveness and slight denaturation susceptibility. These features led important efforts toward the development of aptamer-based sensors, known as apta-sensors classified into optical, electrical and mass-sensitive based on the signal transduction mode. This review provided a number of current advancements in selecting, development criteria, and aptamers application with the focus on the effect of apta-sensors, specifically for disease-associated analyses. The review concentrated on the current reports of apta-sensors that are used for evaluating different food and environmental pollutants.

Optical-Based (Bio) Sensing Systems Using Magnetic Nanoparticles

In recent years, various reports related to sensing application research have suggested that combining the synergistic impacts of optical, electrical or magnetic properties in a single technique can lead to a new multitasking platform. Owing to their unique features of the magnetic moment, biocompatibility, ease of surface modification, chemical stability, high surface area, high mass transference, magnetic nanoparticles have found a wide range of applications in various fields, especially in sensing systems. The present review is comprehensive information about magnetic nanoparticles utilized in the optical sensing platform, broadly categorized into four types: surface plasmon resonance (SPR), surface-enhanced Raman spectroscopy (SERS), fluorescence spectroscopy and near-infrared spectroscopy and imaging (NIRS) that are commonly used in various (bio) analytical applications. The review also includes some conclusions on the state of the art in this field and future aspects.

The Diversity of Cyanobacterial Toxins on Structural Characterization, Distribution and Identification: A Systematic Review

The widespread distribution of cyanobacteria in the aquatic environment is increasing the risk of water pollution caused by cyanotoxins, which poses a serious threat to human health. However, the structural characterization, distribution and identification techniques of cyanotoxins have not been comprehensively reviewed in previous studies. This paper aims to elaborate the existing information systematically on the diversity of cyanotoxins to identify valuable research avenues. According to the chemical structure, cyanotoxins are mainly classified into cyclic peptides, alkaloids, lipopeptides, nonprotein amino acids and lipoglycans. In terms of global distribution, the amount of cyanotoxins are unbalanced in different areas. The diversity of cyanotoxins is more obviously found in many developed countries than that in undeveloped countries. Moreover, the threat of cyanotoxins has promoted the development of identification and detection technology. Many emerging methods have been developed to detect cyanotoxins in the environment. This communication provides a comprehensive review of the diversity of cyanotoxins, and the detection and identification technology was discussed. This detailed information will be a valuable resource for identifying the various types of cyanotoxins which threaten the environment of different areas. The ability to accurately identify specific cyanotoxins is an obvious and essential aspect of cyanobacterial research.

An ultrasensitive electrochemical sensing method for detection of microcystin-LR based on infinity-shaped DNA structure using double aptamer and terminal deoxynucleotidyl transferase

This study develops a novel electrochemical sensing platform for microcystin-LR (MC-LR) detection. This aptasensor comprises the hybridization of double aptamer to its complementary strand (CS) on the surface of electrode and generation of an Infinity-shaped DNA structure in the absence of target by terminal deoxynucleotidyl transferase (TdT). The formation of Infinity-shaped construction leads to the development of an ultrasensitive aptasensor for MC-LR detection. In the presence of MC-LR, double aptamer is dissociated from its CS because of its high affinity for MC-LR and leaves the surface of electrode. Subsequently, no Infinity-shaped structure is formed following the introduction of TdT and a strong current signal is observed. The proposed method was employed for specific detection of MC-LR in the range from 60 pM to 1000 nM with a detection limit of 15 pM. The credibility of the approach was confirmed by detection of MC-LR in real samples like serum and tap water samples. This study provides a new aptasensor for detection of MC-LR as well as other toxin analysis.

Development and Application of Aptamer-Based Surface-Enhanced Raman Spectroscopy Sensors in Quantitative Analysis and Biotherapy

Surface-enhanced Raman scattering (SERS) is one of the most special and important Raman techniques. An apparent Raman signal can be observed when the target molecules are absorbed onto the surface of the SERS substrates, especially on the "hot spots" of the substrates. Early research focused on exploring the highly active SERS substrates and their detection applications in label-free SERS technology. However, it is a great challenge to use these label-free SERS sensors for detecting hydrophobic or non-polar molecules, especially in complex systems or at low concentrations. Therefore, antibodies, aptamers, and antimicrobial peptides have been used to effectively improve the target selectivity and meet the analysis requirements. Among these selective elements, aptamers are easy to use for synthesis and modifications, and their stability, affinity and specificity are extremely good; they have been successfully used in a variety of testing areas. The combination of SERS detection technology and aptamer recognition ability not only improved the selection accuracy of target molecules, but also improved the sensitivity of the analysis. Variations of aptamer-based SERS sensors have been developed and have achieved satisfactory results in the analysis of small molecules, pathogenic microorganism, mycotoxins, tumor marker and other functional molecules, as well as in successful photothermal therapy of tumors. Herein, we present the latest advances of the aptamer-based SERS sensors, as well as the assembling sensing platforms and the strategies for signal amplification. Furthermore, the existing problems and potential trends of the aptamer-based SERS sensors are discussed.