Emulsion gels as delivery systems for phenolic compounds: Nutritional, technological and structural properties

Fabrication of grape seed proanthocyanidin-loaded W/O/W emulsion gels stabilized by polyglycerol polyricinoleate and whey protein isolate with konjac glucomannan: Structure, stability, and in vitro digestion

In this work, the effects of konjac glucomannan (KGM) concentrations on microstructure, gel properties, stability and digestibility of water-in-oil-in-water emulsion gels stabilized by polyglycerol polyricinoleate and whey protein isolate were investigated. Visual appearance indicated that a non-layered double emulsion gel was formed when KGM increased to 0.75%. Emulsion gels with 1.5% KGM showed the highest encapsulation, freeze-thaw and photochemical stability due to the formation of the smallest droplets, which were supported by microscopic observations. Moreover, the addition of KGM improved water holding capacity, rheological and texture properties of emulsion gels. Particularly, at 1.5% or 1.75% KGM, color and potential of hydrogen showed the most stable level after 14 days of storage. During in vitro digestion, KGM delayed the hydrolysis of protein and oil droplets, and then improved the bioavailability of grape seed proanthocyanidin. These results promoted the application of KGM in emulsion gels and the encapsulation of nutraceuticals.

Fat reduced cookies using an olive oil-alginate gelled emulsion: sensory properties, storage stability and in vitro digestion

Reformulated cookies substituting 100 % butter by an olive oil-alginate gelled emulsion containing 40 % olive oil were elaborated with and without antioxidant, and their nutritional and sensory properties were assessed. Moreover, their performance during in vitro digestion as well as their oxidative stability during storage (21 days) were studied. Reformulated cookies showed a lower fat content (a decrease of 40 %), being this fraction mostly unsaturated (70 % lower saturated fat), in comparison with conventional cookies. Instrumental measures showed higher values for hardness with reformulation, which tends to equalize during storage. Reformulated cookies had good general sensory acceptability, although lower than control ones. Regarding oxidative stability, increases in malondialdehyde were observed in all formulations during storage, but not representing an oxidation problem (<1.5 nmol/g cookies). In vitro digestion assay promoted oxidation, but the use of antioxidants seemed to have a mitigating effect. Also, it seemed that the bioaccessibility of fatty acids after in vitro digestion was higher in the reformulated products (35-40 %) than in the control ones (10-25 %).

Are quinoa proteins a promising alternative to be applied in plant-based emulsion gel formulation?

Emulsion gels are structured emulsion systems that behave as soft solid-like materials. Emulsion gels are commonly used in food-product design both as fat replacers and as delivery carriers of bioactive compounds. Different plant-derived proteins like soy, chia, and oat have been used in emulsion gel formulation to substitute fat in meat products and to deliver some vegetable dyes or extracts. Quinoa protein isolates have been scarcely applied in emulsion gel formulation although they seem to be a promising alternative as emulsion stabilizers. Quinoa protein isolates have a high protein content with a well-balanced amino acid profile and show good emulsifying and gelling capabilities. Unlike quinoa starch, quinoa protein isolates do not require any chemical modification before being used. The present article reviews the state of the art in food emulsion gels stabilized with vegetable proteins and highlights the potential uses of quinoa proteins in emulsion gel formulation.

Engineering Emulsion Gels as Functional Colloids Emphasizing Food Applications: A Review

Gels are functional materials with well-defined structures (three-dimensional networks) assembled from the dispersed colloids, and capable of containing a large amount of water, oil, or air (by replacing the liquid within the gel pores), known as a hydrogel, oleogel, and aerogel, respectively. An emulsion gel is a gelled matrix filled with emulsion dispersion in which at least one phase, either continuous phase or dispersed phase forms spatial networks leading to the formation of a semisolid texture. Recently, the interest in the application of gels as functional colloids has attracted great attention in the food industry due to their tunable morphology and microstructure, promising physicochemical, mechanical, and functional properties, and superior stability, as well as controlled release, features for the encapsulated bioactive compounds. This article covers recent research progress on functional colloids (emulsion gels), including their fabrication, classification (protein-, polysaccharide-, and mixed emulsion gels), and properties specifically those related to the gel-body interactions (texture perception, digestion, and absorption), and industrial applications. The emerging applications, including encapsulation and controlled release, texture design and modification, fat replacement, and probiotics delivery are summarized. A summary of future perspectives to promote emulsion gels' use as functional colloids and delivery systems for scouting potential new applications in the food industry is also proposed. Emulsion gels are promising colloids being used to tailor breakdown behavior and sensory perception of food, as well as for the processing, transportation, and targeted release of food additives, functional ingredients, and bioactive substances with flexibility in designing structural and functional parameters.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases-Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.

Nanoscale Effects on the Surfactant Adsorption and Interface Charging in Hexadecane/Water Emulsions

Nanoscale properties at interfaces play a key role in the colloidal stability of emulsions and other soft matter materials where physical properties need to be controlled from the nano to macroscopically visible length scales. Our molecular level understanding of oil-water interfaces arises mostly from results at extended interfaces and the common view that emulsions are stabilized by a large number of surfactant molecules at the droplet's interface which, however, has been recently challenged. In this work, we show that the particle size and the curvature of oil droplets at the nanoscale is of great importance for the interface adsorption of dodecyl sulfate surfactants and possible counterion condensation at the charged hexadecane-water interface. Using second-harmonic scattering, we have studied the surface charge of oil droplets in nanoemulsions where we systematically varied the particle size R between 80 and 270 nm and demonstrate that the surface charge density σ changes drastically with size: For sizes >200 nm, σ is similar to what can be expected at flat extended interfaces, while σ is dramatically reduced by almost an order of magnitude when the particle size of the oil droplet is 80 nm. Using a theoretical approach that considers counterion condensation, we quantify the nanoscale effects on the change in surface charge with particle size and find excellent agreement with our experimental result. Modeling of the experimental results also implies that the charge per particle remains constant and depends on a critical balance of surfactant adsorption and ion condensation.

Current Progress in the Utilization of Soy-Based Emulsifiers in Food Applications-A Review

Soy-based emulsifiers are currently extensively studied and applied in the food industry. They are employed for food emulsion stabilization due to their ability to absorb at the oil–water interface. In this review, the emulsifying properties and the destabilization mechanisms of food emulsions were briefly introduced. Herein, the effect of the modification process on the emulsifying characteristics of soy protein and the formation of soy protein–polysaccharides for improved stability of emulsions were discussed. Furthermore, the relationship between the structural and emulsifying properties of soy polysaccharides and soy lecithin and their combined effect on the protein stabilized emulsion were reviewed. Due to the unique emulsifying properties, soy-based emulsifiers have found several applications in bioactive and nutrient delivery, fat replacer, and plant-based creamer in the food industry. Finally, the future trends of the research on soy-based emulsifiers were proposed.

Structural and Technological Approach to Reveal the Role of the Lipid Phase in the Formation of Soy Emulsion Gels with Chia Oil

Considerable attention has been paid to emulsion gels (EGs) in recent years due to their interesting applications in food. The aim of this work is to shed light on the role played by chia oil in the technological and structural properties of EGs made from soy protein isolates (SPI) and alginate. Two systems were studied: oil-free SPI gels (SPI/G) and the corresponding SPI EGs (SPI/EG) that contain chia oil. The proximate composition, technological properties (syneresis, pH, color and texture) and structural properties using Raman spectroscopy were determined for SPI/G and SPI/EG. No noticeable (p > 0.05) syneresis was observed in either sample. The pH values were similar (p > 0.05) for SPI/G and SPI/EG, but their texture and color differed significantly depending on the presence of chia oil. SPI/EG featured significantly lower redness and more lightness and yellowness and exhibited greater puncture and gel strengths than SPI/G. Raman spectroscopy revealed significant changes in the protein secondary structure, i.e., higher (p < 0.05) α-helix and lower (p < 0.05) β-sheet, turn and unordered structures, after the incorporation of chia oil to form the corresponding SPI/EG. Apparently, there is a correlation between these structural changes and the textural modifications observed.

Development of Meat Products with Healthier Lipid Content: Vibrational Spectroscopy

This review focuses on the importance of developing meat products with healthier lipid content and strategies such as the use of structured lipids to develop these enriched products. The review also conducts a critical analysis of the use of vibrational spectroscopy as a tool to further these developments. Meat and meat products are extensively recognized and consumed in the world. They are an important nutritional contribution in our diet. However, their consumption has also been associated with some negative consequences for health due to some of its components. There are new trends in the design of healthy meat products focusing mainly on improving their composition. From among the different strategies, improving lipid content is the one that has received the most attention. A novel development is the formation of lipid materials based on structured lipids such emulsion gels (EGs) or oil-bulking agents (OBAs) that offer attractive applications in the reformulation of health-enhanced meat products. A deeper interpretation is required of the complicated relationship between the structure of their components and their properties in order to obtain structured lipids and healthier meat products with improved lipid content and acceptable characteristics. To this end, vibrational spectroscopy techniques (Raman and infrared spectroscopy) have been demonstrated to be suitable in the elucidation of the structural characteristics of lipid materials based on structured lipids (EGs or OBAs) and the corresponding reformulated health-enhanced meat products into which these fat replacers have been incorporated. Future research on these structures and how they correlate to certain technological properties could help in selecting the best lipid material to achieve specific technological properties in healthier meat products with improved lipid content.