Coalescence behavior of eco-friendly Pickering-MIPES and HIPEs stabilized by using bacterial cellulose nanofibrils

Low gelatin concentration assisted cellulose nanocrystals stabilized high internal phase emulsion: The key role of interaction

Low concentrations of gelatin (0.02-0.20 wt%) were applied to regulate the surface and interface properties of CNC (0.50 wt%) by forming CNC/G complexes. As gelatin concentration increased from 0 to 0.20 wt%, the potential value of CNC/G gradually changed from -44.50 to -17.93 mV. Additionally, various gelatin concentrations led to micromorphology changes of CNC/G complexes, with the formation of particle interconnection at gelatin concentration of 0.10 wt%, followed by network structure and enhanced aggregation at gelatin concentration of 0.15 and 0.20 wt% respectively. The water contact angle (25.91°-80.23°) and interface adsorption capacity of CNC/G were improved due to hydrophobic group exposure of gelatin. When gelatin concentration exceeded 0.10 % at a fixed oil phase volume fraction (75 %), a high internal phase emulsion (HIPE) stabilized by CNC/G can be formed with a good storage stability. The rheological and microstructure results of HIPE confirmed that low gelatin concentration can assist CNC to form stable emulsion structure. Especially, the auxiliary stabilization mechanism of various gelatin concentration was different. CNC/G-0.10 % and CNC/G-0.15 % stabilized HIPE mainly depended on the enhanced interface adsorption and network structure, while CNC/G-0.20 % stabilized HIPE mainly relied on enhanced interface adsorption/accumulation due to weak electrostatic repulsion and aggregate granular morphology of CNC/G-0.20 %.

Improvement of Stress Resistance of Microencapsulated Lactobacillus plantarum by Emulsion Electrospinning

Probiotics have become increasingly recognized for their potential health-promoting properties; however, the viability of probiotics can be affected by storage and transportation processes as well as the stressful environment of the human digestive tract, preventing them from achieving effective concentration (107 CFU/mL). In this regard, the embedding technology of probiotics provides an effective protection method. Dextran-based water in water (W/W) emulsion loaded with Lactobacillus plantarum was used as spinning solution to prepare Lactobacillus plantarum-loaded electrospun fibers. The structure of the W/W emulsion and the electrospun fibers was charactered. Lactobacillus plantarum were uniformly embedded in the internal phase of the W/W emulsion and the loading efficiency was 9.70 ± 0.40 log CFU/g. After 240 min digestion in the gastrointestinal tract, and temperature treatment in 65 °C and 72 °C, the loaded probiotics maintained high activity. Even after 5 days of storage in room temperature and 4 °C, the loaded probiotic activity levels remained high, with counts >8 log CFU/g. These results suggest that probiotics encapsulated by emulsion electrospinning could be potentially delivered in a novel food delivery system used in the future food industry.

Pickering Emulsion Stabilized by Hordein-Whey Protein Isolate Complex: Delivery System of Quercetin

As a lipophilic flavonol, quercetin has low bioavailability, which limits its application in foods. This work aimed to prepare a hordein-based system to deliver quercetin. We constructed hordein-whey isolate protein fibril (WPIF) complexes (H-Ws) by anti-solvent precipitation method at pH 2.5. The TEM results of the complexes showed that spherical-like hordein particles were wrapped in WPIF clusters to form an interconnected network structure. FTIR spectra revealed that hydrogen bonds and hydrophobic interactions were the main driving forces for the complex formation. H-W1 (the mass ratio of hordein to WPIF was 1:1) with a three-phase contact angle of 70.2° was chosen to stabilize Pickering emulsions with oil volume fractions (φ) of 40-70%. CLSM images confirmed that the oil droplets were gradually embedded in the three-dimensional network structure of H-W1 with the increase in oil volume fraction. The emulsion with φ = 70% showed a tight gel structure. Furthermore, this emulsion exhibited high encapsulation efficiency (97.8%) and a loading capacity of 0.2%, demonstrating the potential to deliver hydrophobic bioactive substances. Compared with free quercetin, the bioaccessibility of the encapsulated quercetin (35%) was significantly improved. This study effectively promoted the application of hordein-based delivery systems in the food industry.

Effect of in-situ biochemical modification on the synthesis, structure, and function of xanthan gum based bacterial cellulose generated from Tieguanyin oolong tea residue hydrolysate

The effect of in-situ biochemical modification on the synthesis, structure, and function of xanthan gum based bacterial cellulose generated from Tieguanyin oolong tea residue hydrolysate was evaluated for the first time. This modification could overcome the inhibitory effect of the hydrolysate and the bacterial cellulose yield with 0.6% xanthan gum addition increased by 260.8% compared with that without xanthan gum addition. Bacterial cellulose and xanthan gum were combined by the in-situ modification and the alteration of fermentation medium rheological properties by xanthan gum addition might be beneficial for their combination. The average diameter of the bacterial cellulose microfibrils was increased by the modification, and it had a great influence on the crystalline structure of the bacterial cellulose. Additionally, both the water absorption and texture properties of the bacterial cellulose was strengthened by the modification. Overall, this modification showed great potential for efficient and effective xanthan gum based bacterial cellulose production.

Formulation and stabilization of high internal phase emulsions via mechanical cellulose nanofibrils/ethyl lauroyl arginate complexes

Motivated by the quest for biocompatibility, we report on oil-in-water (O/W), high-internal-phase Pickering emulsions stabilized via complexes of mechanical cellulose nanofibrils (CNF) and food-grade cationic surfactant ethyl lauroyl arginate (LAE). The complexation of oppositely charged CNF and LAE can be held together by electrostatic interaction. Their effect on suspensions electrostatic stabilization, heteroaggregation state, and emulsifying ability was studied and related to properties of resultant interfacial tension between oil and water and 3D printing of emulsions. The Pickering system with adjustable droplet diameter and stability against creaming and oiling-off during storage was achieved resting with LAE loading. Complexes formed by LAE adjustment act as Pickering stabilizers and three-dimensional networks in emulsion system, forming a scaffold with elastoplastic rheological properties that flows above critical stress while, without any additional treatment, exhibiting the required self-standing properties for 3D printing. By understanding the properties of CNF/LAE behavior in bulk and on interfaces, printing edible functional foods of CNF/LAE-based emulgel inks has been demonstrated to enable regulation of oil release.

Development of protein-polyphenol particles to stabilize high internal phase Pickering emulsions by polyphenols' structure

Protein-polyphenol colloidal particles are promising stabilizers for high internal phase Pickering emulsions (HIPPEs). However, the relationship between the structure of the polyphenols and its ability to stabilize HIPPEs has not been studied thus far. In this study, bovine serum albumin (BSA)-polyphenols (B-P) complexes were prepared, and their ability to stabilize HIPPEs was investigated. The polyphenols were bound to BSA via non-covalent interactions. Optically isomeric polyphenols formed similar bonds with BSA, whereas a greater number of trihydroxybenzoyl groups or hydroxyl groups in the dihydroxyphenyl moieties of polyphenols increased the B-P interactions. Polyphenols also reduced the interfacial tension and enhanced the wettability at the oil-water interface. The HIPPE stabilized by BSA-tannic acid complex exhibited the highest stability among the B-P complexes and resisted demixing and aggregation during centrifugation. This study promotes the potential applications of polyphenol-protein colloidal particles-stabilized HIPPEs in the food industry.

Properties of Pickering emulsions stabilized by cellulose nanocrystals extracted from litchi peels

The development of Pickering emulsions which are applicable to the food industry still remains challenges due to the limited availability for biocompatible, edible and natural emulsifiers. The purpose of this study was to extract cellulose nanocrystals from litchi peels (LP-CNCs), and evaluate their emulsifying properties. The results showed that the LP-CNCs were needle-like and they possessed high crystallinity (72.34 %) and aspect ratio. When the concentrations of LP-CNCs were >0.7 wt% or the contents of oil were no >0.5, stable Pickering emulsions were obtained. The microstructures of emulsions confirmed that LP-CNCs formed dense interfacial layers on the surface of oil droplets, which functioned as barriers to prevent aggregation and flocculation among droplets. Rheological results showed that the emulsions exhibited typical shear thinning behavior. The elastic of emulsions was dominant, and their gel strength could be enhanced by regulating the contents of emulsifiers or oil. Additionally, the Pickering emulsions stabilized by LP-CNCs showed extremely high pH, ionic strength, and temperature tolerance. This strategy provides an innovative alternative to tackle the dilemma of preparing highly stable Pickering emulsions using natural particles in food products.

Impact of interactions between peanut protein isolate and cellulose nanocrystals on the properties of Pickering emulsions: Rheological properties and physical stabilities

The interactions between cellulose nanocrystals and proteins can regulate the interfacial properties of Pickering emulsions, which plays a leading role in the stabilities of Pickering emulsions. In this work, oil-in-water (O/W) Pickering emulsions with different oil-water ratios were prepared using peanut protein isolate modified by cellulose nanocrystals (PPI/CL-CNCs). The distributions of PPI/CL-CNCs at the oil-water interfaces and the microstructures of Pickering emulsions were observed by CLSM and cryo-SEM. The results showed that stable complexes PPI/CL-CNCs formed thick and dense interface layers on the surface of oil droplets. The results of rheological tests clarified that the Pickering emulsions showed an elastic and gel texture, and their gel strength could be enhanced by regulating the oil-water ratios from 3:7 to 7:3. In addition, after one month of storage, the EI of all emulsions remained above 92 % with no obvious phase separation or demulsification. These results suggested that the PPI/CL-CNCs-stabilized Pickering emulsions showed good physical stabilities. The study on the rheological properties and physical stabilities of PPI/CL-CNCs-based Pickering emulsions provided novel insights on developing highly stable Pickering emulsions.

Biopolymer-based pickering high internal phase emulsions: Intrinsic composition of matrix components, fundamental characteristics and perspective

Pickering HIPEs have received tremendous attention in recent years due to their superior stability and unique solid-like and rheological properties. Biopolymer-based colloidal particles derived from proteins, polysaccharides and polyphenols have been demonstrated to be safety stabilizers for the construction of Pickering HIPEs, which can meet the demands of consumers for "all-natural" products and provide "clean-label" foods. Furthermore, the functionality of these biopolymers can be further extended by forming composite, conjugated and multi-component colloidal particles, which can be used to modulate the properties of the interfacial layer, thereby adjusting the performance and stability of Pickering HIPEs. In this review, the factors affecting the interfacial behavior and adsorption characteristics of colloidal particles are discussed. The intrinsic composition of matrix components and fundamental characteristics of Pickering HIPEs are emphatically summarized, and the emerging applications of Pickering HIPEs in the food industry are reviewed. Inspired by these findings, future perspectives concerning this field are also put forward, including (1) the exploration of the interactions between biopolymers used to produce Pickering HIPEs and target food ingredients, and the influence of the added biopolymers on the flavor and mouthfeel of the products, (2) the investigation of the digestion properties of Pickering HIPEs under oral administration, and (3) the fabrication of stimulus-responsive or transparent Pickering HIPEs. This review will give a reference for exploring more natural biopolymers for Pickering HIPEs application development.

Synthesis process and adsorption performance of temperature-sensitive ion-imprinted porous microspheres (ReO4−-TIIM) for the selective separation of ReO4−

The adsorption–desorption process of imprinted microspheres is controlled by changing the temperature conditions of the external environment.

Bacterial Cellulose Nanofibril-Based Pickering Emulsions: Recent Trends and Applications in the Food Industry

The Pickering emulsion stabilized by food-grade colloidal particles has developed rapidly in recent decades and attracts extensive attention for potential applications in the food industry. Bacterial cellulose nanofibrils (BCNFs), as green and sustainable colloidal nanoparticles derived from bacterial cellulose, have various advantages for Pickering emulsion stabilization and applications due to their unique properties, such as good amphiphilicity, a nanoscale fibrous network, a high aspect ratio, low toxicity, excellent biocompatibility, and sustainability. This review provides a comprehensive overview of the recent advances in the Pickering emulsion stabilized by BCNF particles, including the classification, preparation method, and physicochemical properties of diverse BCNF-based particles as Pickering stabilizers, as well as surface modifications with other substances to improve their emulsifying performance and functionality. Additionally, this paper highlights the stabilization mechanisms and provides potential food applications of BCNF-based Pickering emulsions, such as nutrient encapsulation and delivery, edible coatings and films, fat substitutes, etc. Furthermore, the safety issues and future challenges for the development and food-related applications of BCNFs-based Pickering emulsions are also outlined. This work will provide new insights and more ideas on the development and application of nanofibril-based Pickering emulsions for researchers.

Research Progress of Food-Grade High Internal Phase Pickering Emulsions and Their Application in 3D Printing

High internal phase Pickering emulsion (HIPPE) is a type of emulsion stabilized by solid particles irreversibly adsorbed on an interfacial film, and the volume fraction of the dispersed phase (Φ) is larger than the maximum packing volume fraction (Φ_max). Proteins, polysaccharides, and their composite particles can be used as good particle stabilizers. The contact angle can most intuitively demonstrate the hydrophilicity and hydrophobicity of the particles and also determines the type of emulsions (O/W or W/O type). Particles' three-phase contact angles can be adjusted to about 90° by compounding or modification, which is more conducive to emulsion stability. As a shear thinning pseudoplastic fluid, HIPPE can be extruded smoothly through 3D printer nozzles, and its high storage modulus can support the structure of printed products. There is huge potential for future applications in 3D printing of food. This work reviewed the biomacromolecules that can be used to stabilize food-grade HIPPE, the stabilization mechanism of the emulsions, and the research progress of food 3D printing to provide a reference for the development of advanced food products based on HIPPE.

ZnO nanoparticles stabilized oregano essential oil Pickering emulsion for functional cellulose nanofibrils packaging films with antimicrobial and antioxidant activity

The growth and reproduction of microorganisms can cause food spoilage in the process of food transportation and storage. Active packaging is a good way to inhibit food spoilage and prolong the shelf lives of foods. In this study, O/W Pickering emulsion with ZnO nanoparticles as solid particles and oregano essential oil as the oil phase was prepared and used to functionalize cellulose nanofibrils (CNFs) film, and excellent antimicrobial and antioxidant activity was obtained. When the concentration of ZnO nanoparticles was 1.5 wt% and the mass fraction of the oil phase was 20%, the Pickering emulsion with a particle size of 26.85 μm exhibited strong standing stability. The Pickering emulsion was blended with the film-forming matrix CNFs to prepare active packaging films by casting. The Pickering emulsion evenly dispersed in the film to form microcapsules which encapsulated oregano essential oil entirely. The antimicrobial activity against Listeria monocytogenes was 89.61%, the DPPH radical scavenging rate was 58.52%, while the barrier properties of the developed films against oxygen, water vapor and visible light were improved. The active CNFs film prepared by Pickering emulsion could inhibit the growth of microorganism and prolong the shelf lives of foods.