Sensitive and selective electrochemical detection of bisphenol A based on SBA-15 like Cu-PMO modified glassy carbon electrode

On-site detection and differentiation of African swine fever virus variants using an orthogonal CRISPR-Cas12b/Cas13a-based assay

The African swine fever virus (ASFV) and its variants have induced substantial economic losses in China, prompting a critical need for efficient detection methods. Several PCR-based methods have been developed to discriminate between wild-type ASFV and gene-deleted variants. However, the requirement for sophisticated equipment and skilled operators limits their use in field settings. Here, we developed a CRISPR-Cas12b/Cas13a-based detection assay that can identify ASFV variants with minimal equipment requirements and a short turnaround time. The assay utilizes the distinct DNA/RNA collateral cleavage preferences of Cas12b/Cas13a to detect two amplified targets from multiplex recombinase polymerase amplification (RPA) in a single tube, and the results can be visualized through fluorescent or lateral-flow readouts. When tested with clinical samples in field settings, our assay successfully detected all ASFV-positive samples in less than 60 min. This assay provides a rapid on-site surveillance tool for detecting ASFV and its emerging variants.

Cuscuta chinensis flavonoids alleviate ovarian damage in offspring female mice induced by BPA exposure during pregnancy by regulating the central carbon metabolism pathway

Pregnancy is a sensitive window period for bisphenol A (BPA) exposure. BPA can pass through the placenta and cause reproductive damage in offspring female mice. Even BPA that is not metabolized during lactation can be passed through milk. Cuscuta chinensis flavonoids (CCFs) can alleviate reproductive damage caused by BPA, but the mechanism of action is unclear. To investigate the potential mitigating impact of CCFs on ovarian damage resulting from BPA exposure during pregnancy, we administered BPA and CCFs to pregnant mice during the gestational period spanning from 0.5 to 17.5 days. Aseptic collection of serum and ovaries from female mice was conducted on postnatal day 21 (PND21). Serum hormone levels and tissue receptor levels were quantified utilizing ELISA and PCR, while ovaries underwent sequencing and analysis through transcriptomics and metabolomics techniques. Additionally, the assessment of ovarian oxidative stress levels was carried out as part of the comprehensive analysis. The results showed that CCFs administration mitigated the adverse effects induced by BPA exposure on ovarian index, hormone levels, receptor expression, and mRNA expression levels in female offspring mice. The joint analysis of transcriptome and metabolome revealed 48 enriched pathways in positive ion mode and 44 enriched pathways in negative ion mode. Among them, the central carbon metabolism pathway is significantly regulated by BPA and CCFs. The screened sequencing results were verified through qPCR and biochemical kits. In this study, CCFs may participate in the central carbon metabolism pathway by reducing the expression of Kit proto-oncogene (Kit), hexokinase 1 gene (Hk1) and pyruvate kinase M (Pkm) mRNA and increasing the expression of h-ras proto-oncogene (Hras), sirtuin 3 (Sirt3), sirtuin 6 (Sirt6) and TP53 induced glycolysis regulatory phosphatase gene (Tigar) mRNA, thereby resisting the effects of BPA on the body. At the same time, the metabolic levels of D-Fructose 1,6-bisphosphate and L-Asparagine tend to be stable. Moreover, CCFs demonstrated a capacity to diminish the BPA-induced escalation in reactive oxygen species (ROS) and malondialdehyde (MDA). Simultaneously, it exhibited the ability to elevate levels of glutathione (GSH) and catalase (CAT), thereby effectively preventing peroxidation. In summary, CCFs alleviate BPA-induced ovarian damage in offspring female mice by regulating the central carbon metabolism pathway. This study will improve the information on BPA reproductive damage antagonist drugs and provide a theoretical basis for protecting animal reproductive health.

Single-Mg-Atom Catalyst with a Dual Active Center as an Emerging Promising Sensing Platform

Bisphenol compounds [bisphenol A (BPA), etc.] are one class of the most important and widespread pollutants in food and environment, which pose severe endocrine disrupting effect, reproductive toxicity, immunotoxicity, and metabolic toxicity on humans and animals. Simultaneous rapid determination of BPA and its analogues (bisphenol S, bisphenol AF, etc.) with extraordinary potential resolution and sensitivity is of great significance but still extremely challenging. Herein, a series of single-atom catalysts (SACs) were synthesized by anchoring different metal atoms (Mg, Co, Ni, and Cu) on N-doped carbon materials and used as sensing materials for simultaneous detection of bisphenols with similar chemical structures. The Mg-based SAC enables the potential discrimination and simultaneous rapid detection of multiple bisphenols, showing outstanding analytical performances, outperforming all other SACs and traditional electrode materials. Our experiments and density functional theory calculations show that pyrrolic N serves as the adsorption site for the adsorption of bisphenols and the Mg atom serves as the active site for the electrocatalytic oxidation of bisphenols, which play a synergistic role as dual active centers in improving the sensing performance. The results of this work may pave the way for the rational design of SACs as advanced sensing and catalytic materials.

Preparation and characterization of zein-tannic acid nanoparticles/chitosan composite films and application in the preservation of sugar oranges

Chitosan-based food packaging film was prepared by incorporating zein-tannic acid nanoparticles (ZTNPs) into chitosan and was evaluated in terms of structure, physical, mechanical and functional properties. Results showed that there were hydrogen bonding interactions between ZTNPs and chitosan matrix, which is conductive to mechanical enhancements of chitosan films. Compared with the pure chitosan film, the composite films with 10% ZTNPs at pH 4 showed the increased tensile strength by 196.58%, increased elongation at break by 161.37%, decreased water vapor permeability by 70.76% and decreased oxygen permeability by 40.68%. The highest inhibition rates of this composite film-forming fluid against Escherichia coli and Staphylococcus aureus reached 83.32% and 72.35%, respectively. The composite film forming solution formed by adding 10% ZTNPs was used for sugar orange preservation. The weight loss rate of oranges was reduced and the nutrient retention rate was improved. This study expanded the application of chitosan-based packaging materials in fruit preservation.

Magnetic-encoded fluorescent nanospheres-based competitive immunoassay for near-simultaneous detection of four mycotoxins in wheat

Simultaneous detection of mycotoxins is important for food safety. In this study, a magnetic-encoded fluorescent nanosphere-based competitive immunosensor (cFMEIS) with 2×2 array was first developed for simultaneous detection of aflatoxin B1 (AFB1), ochratoxin (OTA), deoxynivalenol (DON), and zearalenone (ZEN) in wheat. Specifically, magnetic nanoparticles with strong and weak responses were conjugated with mycotoxin antigens as capture probes. Fluorescent nanoparticles doped with europium ion (Eu3+) and terbium ion (Tb3+) with red and green emission were coupled with mycotoxin antibodies as signal probes. Using a magnetic field, immune complexes were sequentially separated in a complex system and fluorescently detected. The detection limits of AFB1, DON, OTA, and ZEN were 0.032, 0.141, 0.097, and 0.376 μg/kg, respectively. The recoveries in the certified reference material of wheat flour ranged from 81.6 to 120.0 %. Owing to its high accuracy, selectivity, and sensitivity, the cFMEIS shows great promise as an efficient and sensitive multitarget sensor for mycotoxins.

Quinone-amine polymer nanospheres with enhanced redox activity for aqueous proton storage

One of the biggest obstacles to the development of aqueous proton batteries (APBs), despite numerous optimization techniques, is the preparation and use of high-performance electrode materials. In this work, to improve the high solubility, limited capacity and poor cycle life of small organic molecules in APBs, homogeneous dispersed quinone-amine polymer nanospheres (PQANS) (average diameter: 220 nm) were synthesized by a polymerization reaction based on 3,3'-diaminobenzidine (DAB) and benzoquinone (BQ), making them suitable for proton storage in aqueous systems. As an anode for APBs, the obtained PQANS exhibits an improved reversible capacity of 126.2 mAh/g at 1 A/g after 300 cycles. The durable stable measurement of PQANS at 10 A/g was also conducted with a specific capacity of 66.8 mAh/g after 12,000 cycles. A series of in situ or ex situ measurements were used to establish the superior H+ storage mechanism of PQANS. A novel reaction mechanism of redox enhancement was revealed due to the existence of more carbonyl groups after the first cycle. Theoretical calculations were conducted to help illustrate the principle of binding protons with functional groups in PQANS. Finally, a PQANS anode-based aqueous proton full battery was constructed to demonstrate its potential application, which exhibits a specific capacity of 50.6 mAh/g at 1 A/g (600 cycles). This work provides a reference for preparing high-performance polymer-based electrode materials in aqueous batteries.

Green Synthesis of Silver Nanoparticles Derived from Papaver rhoeas L. Leaf Extract: Cytotoxic and Antimicrobial Properties

In the last few decades, the search for metal nanoparticles as an alternative to cancer treatments and antibiotics has increased. In this article, the spectroscopic (ultraviolet-visible (UV-vis), electron-dispersing X-ray (EDX), and Fourier transform infrared (FT-IR)), microscopic (field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), and atomic force microscope (AFM)), structural (X-ray diffractometer (XRD) and zetasizer), and analytic (thermogravimetric/differential thermal analyzer (TGA-DTA)) characterization of the silver nanoparticles (AgNPs) produced from Papaver rhoeas (PR) L. leaf extract are presented. PR-AgNPs are generally spherical and have a maximum surface plasmon resonance of 464.03 nm. The dimensions of the manufactured nanomaterial are in the range of 1.47-7.31 nm. PR-AgNPs have high thermal stability and a zeta potential of -36.1 mV. The minimum inhibitory concentration (MIC) values (mg L-1) of PR-AgNPs on Staphylococcus aureus, Escherichia coli, Bacillus subtilis, Pseudomonas aeruginosa, and Candida albicans are 1.50, 0.75, 3.00, 6.00, and 0.37, respectively. In the study, the cytotoxic and proliferative effects of PR-AgNPs using the MTT (3-(4,5-dimethylthiazol-2-yl)-diphenyltetrazolium bromide) method on various cancer cell lines (CACO-2 (human colon adenocarcinoma cell), MCF-7 (human breast cancer cell), T98-G (glioblastoma multiforme cell), and healthy HUVEC (human umbilical vein endothelial cell)) cell lines are presented. After 24 and 48 h of the application, the half-maximum inhibitory concentration (IC50) values (μg mL-1) of PR-AgNPs on HUVEC, CACO-2, MCF-7, and T98-G lines are 2.365 and 2.380; 2.526 and 2.521; 3.274 and 3.318; 3.472 and 3.526, respectively. Comprehensive in vivo research of PR-AgNPs is proposed to reveal their potential for usage in sectors such as nanomedicine and nanochemistry.

Electrochemical Determination of 17-β-Estradiol Using a Glassy Carbon Electrode Modified with α-Fe2O3 Nanoparticles Supported on Carbon Nanotubes

In this study, a novel electrochemical assay for determining 17-β-estradiol (E2) was proposed. The approach involves modifying a glassy carbon electrode (GCE) with a nanocomposite consisting of α-Fe2O3 nanoparticles supported on carbon nanotubes (CNTs)-denoted as α-Fe2O3-CNT/GCE. The synthesis of the α-Fe2O3-CNT nanocomposite was achieved through a simple and cost-effective hydrothermal process. Morphological and chemical characterization were conducted using scanning electron microscopy (SEM), Raman spectroscopy, and energy-dispersive X-ray spectroscopy (EDX). The presence of the α-Fe2O3-CNT film on the GCE surface resulted in an enhanced electrochemical response to E2, preventing electrode surface fouling and mitigating the decrease in peak current intensity during E2 oxidation. These outcomes substantiate the rationale behind the GCE modification. After the optimization of experimental conditions, E2 was determined by the square wave voltammetry technique using 0.1 mol L-1 KCl solution (pH = 7.0) with 20% ethanol as a supporting electrolyte. A linear concentration range of 5.0-100.0 nmol L-1 and a low limit of detection of 4.4 nmol L-1 were obtained. The electroanalytical method using α-Fe2O3-CNT/GCE was applied for E2 determination in pharmaceutical, lake water, and synthetic urine samples. The obtained results were attested by recovery tests and by high-performance liquid chromatography as a comparative technique at a 95% confidence level. Thus, the developed electrochemical sensor is simple and fast to obtain, presents high accuracy, and is viable for determining E2 in routine analysis.

Bisphenol A Imprinted Electrochemical Sensor Based on Graphene Quantum Dots with Boron Functionalized g-C3N4 in Food Samples

A molecular imprinted electrochemical sensor based on boron-functionalized graphitic carbon nitride (B-g-C₃N₄) and graphene quantum dots (GQDs) was presented for selective determination of bisphenol A (BPA). In particular, by combining the selectivity and high stability properties, which are the most important advantages of molecular imprinted polymers, and the highly sensitive properties of GQDs/B-g-C₃N₄ nanocomposite, a highly selective and sensitive analytical method was developed for BPA analysis. Firstly, GQDs/B-g-C₃N₄ nanocomposite was characterized by using microscopic, spectroscopic, and electrochemical techniques. This novel molecular imprinted electrochemical sensor for BPA detection demonstrated a linearity of 1.0 × 10^-11-1.0 × 10^-9 M and a low detection limit (LOD, 3.0 × 10^-12 M). BPA-imprinted polymer on GQDs/B-g-C₃N₄ nanocomposite also showed good stability, repeatability and selectivity in food samples.

Bisphenol A detection based on nano gold-doped molecular imprinting electrochemical sensor with enhanced sensitivity

A facile electrochemical sensor based on nano gold-doped molecularly imprinted polymer (MIP) was proposed to realize the selective detection of bisphenol A (BPA) with enhanced sensitivity. Initially, gold-doped MIP (Au@MIP) film was constructed by electropolymerizing p-aminobenzoic acid (PABA) and BPA with in situ gold reduction to distribute gold nanoparticles nearby the imprinted cavities. Subsequently, the template molecules were further extracted from the polymer film, then the MIP could rebind with the template molecules to achieve specific detection of BPA. The nano gold-doped MIP increased the effective surface area and promoted conductivity when BPA was oxidized in the imprinted cavities, which improved the determination sensitivity. Under optimal conditions, the prepared sensor displayed a linear range from 0.5 to 100 μM for BPA detection with a detection limit of 52 nM. The designed sensor was further used to detect BPA in food samples, obtaining satisfactory recoveries from 96.7% to 107.6%.

Novel insights into versatile nanomaterials integrated bioreceptors toward zearalenone ultrasensitive discrimination

Detrimental contamination of zearalenone (ZEN) in crops and foodstuffs has drawn intensive public attention since it poses an ongoing threat to global food security and human health. Highly sensitive and rapid response ZEN trace analysis suitable for complex matrices at different processing stages is an indispensable part of food production. Conventional detection methods for ZEN encounter many deficiencies and demerits such as sophisticated equipment and heavy labor intensity. Alternatively, the nanomaterial-based biosensors featured with high sensitivity, portability, and miniaturization are springing up and emerging as superb substitutes to monitor ZEN in recent years. Herein, we predominantly devoted to overview the progress in the fabrication strategies and applications of various nanomaterial-based biosensors, highlighting rationales on sensing mechanisms, response types, and practical analytical performance. Synchronously, the versatile nanomaterials integrating with diverse recognition elements for augmenting sensing capabilities are emphasized. Finally, critical challenges and perspectives to expedite ZEN detection are outlooked.

Functional Nanomaterials Enhancing Electrochemical Biosensors as Smart Tools for Detecting Infectious Viral Diseases

Electrochemical biosensors are known as analytical tools, guaranteeing rapid and on-site results in medical diagnostics, food safety, environmental protection, and life sciences research. Current research focuses on developing sensors for specific targets and addresses challenges to be solved before their commercialization. These challenges typically include the lowering of the limit of detection, the widening of the linear concentration range, the analysis of real samples in a real environment and the comparison with a standard validation method. Nowadays, functional nanomaterials are designed and applied in electrochemical biosensing to support all these challenges. This review will address the integration of functional nanomaterials in the development of electrochemical biosensors for the rapid diagnosis of viral infections, such as COVID-19, middle east respiratory syndrome (MERS), influenza, hepatitis, human immunodeficiency virus (HIV), and dengue, among others. The role and relevance of the nanomaterial, the type of biosensor, and the electrochemical technique adopted will be discussed. Finally, the critical issues in applying laboratory research to the analysis of real samples, future perspectives, and commercialization aspects of electrochemical biosensors for virus detection will be analyzed.

Electrochemical detection of hydrogen peroxide using micro and nanoporous CeO2 catalysts

In this research work, focus has been made on a glassy carbon electrode (GCE) modified commercial micro and synthesized nano-CeO₂ for the detection of hydrogen peroxide (H₂O₂). Firstly, CeO₂ nanoleaves were prepared by solvothermal route. Both commercially available micro CeO₂ and synthesized nano-CeO₂ structures were analyzed by different characterization techniques. The Raman spectra of synthesized nano CeO₂ has more oxygen vacancies than micro CeO₂. SEM images revealed that the synthesized CeO₂ acquired leaf-like morphology. The catalyst nano CeO₂ offered mesoporosity from nitrogen adsorption-desorption isotherms with massive sites of activation for increasing efficiency. Experiments on determining H₂O₂ using micro CeO₂ or nano-CeO₂/GCE was conducted using cyclic voltammetry (CV) and amperometry. Enhanced H₂O₂ reduction peak current with lower potential was observed in nano-CeO₂/GCE. The influence of scan rate and H₂O₂ concentration on the performance of nano-CeO₂/GCE were also studied. The obtained results have indicated that nano-CeO₂/GCE showed improved electrochemical sensing behavior towards the reduction of H₂O₂ than micro-CeO₂/GCE and bare GCE. A linear relationship was obtained over 0.001 μM-0.125 μM concentration of H₂O₂, with good sensitivity 141.96 μA μM^-1 and low detection limit of 0.4 nM. Hence, the present nano-CeO₂ system will have a great potential with solvothermal synthesis approach in the development of electrochemical sensors.

Tailoring diameters of carbon nanofibers with optimal mesopores to remarkably promote hemin adsorption toward ultrasensitive detection of bisphenol A

Bisphenol A (BPA) is a worldwide used endocrine disrupting chemical that can migration from food containers and packaging, resulting in bioaccumulation of BPA in humans and causing adverse health effects. Porous electrodes have been proved with large surface areas and high sensing abilities in electrochemical detection of BPA. However, how to tailor the pore sizes to further improve the sensing performance is still a great challenge. Here, we delicately tailored the diameters of carbon nanofibers (CNFs) by adjusting electrospinning parameters to have optimal mesopore structure for strong adsorption of hemin that has been demonstrated with high electrocatalytic activity for BPA sensing. Benefiting from the optimal mesopores structure of CNFs and the synergistic effect of hemin and CNFs, this hemin@CNFs based sensor achieves an ultrahigh sensitivity of 40.97 μA cm^-2 μM^-1, a low detection limit of 3.1 nM and satisfactory recoveries from 90.2% to 104.2% in the direct detection of BPA in liquors. This work offers a promising sensing platform for ultrasensitive monitoring of BPA.

Electrochemical Sensor Based on Glassy-Carbon Electrode Modified with Dual-Ligand EC-MOFs Supported on rGO for BPA

The electronic conductive metal-organic frameworks (EC-MOFs) based on a single ligand are not suitable for the accurate detection of bisphenol A (BPA) due to the limitations of their electron-transfer-based sensing mechanism. To overcome this drawback, we developed EC-MOFs with novel dual-ligands, 2,3,6,7,10,11-hexahydroxy-sanya-phenyl (HHTP) and tetrahydroxy 1,4-quinone (THQ), and metal ions. A new class of 2D π-conjugation-based EC-MOFs (M-(HHTP)(THQ)) was synthesized by a self-assemble technique. Its best member (Cu-(HHTP)(THQ)) was selected and combined with reduced graphene (rGO) to form a Cu-(HHTP)(THQ)@rGO composite, which was thoroughly characterized by X-ray diffraction, field scanning electron microscopy, and energy-dispersive X-ray spectroscopy. Cu-(HHTP)(THQ)@rGO was drop-cast onto a glassy carbon electrode (GCE) to obtain a sensor for BPA detection. Cyclic voltammetry and electrochemical impedance tests were used to evaluate the electrode performance. The oxidation current of BPA on the Cu-(HHTP)(THQ)@rGO/GCE was substantially higher than on unmodified GCE, which could be explained by a synergy between Cu-(HHTP)(THQ) (which provided sensing and adsorption) and rGO (which provided fast electron conductivity and high surface area). Cu-(HHTP)(THQ)@rGO/GCE exhibited a linear detection range for 0.05–100 μmol·L⁻¹ of BPA with 3.6 nmol·L⁻¹ (S/N = 3) detection limit. We believe that our novel electrode and BPA sensing method extends the application perspectives of EC-MOFs in the electrocatalysis and sensing fields.

A label-free photoelectrochemical sensor of S, N co-doped graphene quantum dot (S, N-GQD)-modified electrode for ultrasensitive detection of bisphenol A

S, N co-doped graphene quantum dot (S, N-GQD) materials have been composited via a one-pot pattern and used as photosensitive materials to construct a label-free photoelectrochemical (PEC) sensor. The PEC experiments show an enhanced photocurrent response toward Bisphenol A (BPA) sensing due to the increased charge transfer rate and the enhanced absorption of visible light. Compared with dark conditions, the photocurrent signal (- 0.2 V vs. SCE) is greatly increased because of the effective oxidation of BPA by photogenerated holes and the rapid electron transfer of S, N-GQDs on the PEC sensing platform. Under optimal conditions linear current response to BPA is in two ranges of 0.12-5 µM and 5-40 µM. The limit of detection is 0.04 µM (S/N = 3). The designed sensor has enduring stability and admirable interference immunity. It  provides an alternative approach for BPA determination in real samples with recoveries of 99.3-103% and  RSD of 2.0-4.1%.

Electrochemical sensing system for the analysis of emerging contaminants in aquatic environment: A review

This survey distinguishes understudied spaces of arising impurity research in wastewaters and the habitat, and suggests bearing for future checking. Thinking about the impeding effect of toxins on human wellbeing and biological system, their discovery in various media including water is fundamental. This review sums up and assesses the latest advances in the electrochemical detecting of emerging contaminants (ECs). This survey is expected to add to the advancement in electrochemical applications towards the ECs. Different electrochemical insightful procedures like Amperometry, Voltammetry has been examined in this overview. The improvement of cutting edge nanomaterial-based electrochemical sensors and biosensors for the discovery of drug compounds has accumulated monstrous consideration because of their benefits, like high affectability and selectivity, continuous observing, and convenience has been reviewed in this survey. This survey likewise features the diverse electrochemical treatment procedures accessible for the removal of ECs.

Synergistic effect of flower-like MnFe2O4/MoS2 on photo-Fenton oxidation remediation of tetracycline polluted water

In this work, a flower-like MnFe₂O₄-MoS₂ (FMW) catalyst was successfully prepared as a catalyst for photo-Fenton oxidation. The flower-like structured FMW possessed large open surface area, which exposed enough active sites and can fully contact with tetracycline (TC). We studied the effect of different FMW composites, H₂O₂ concentration and light intensity on the photo-Fenton process. 1FMW (MnFe₂O₄:MoS₂ = 1:10 in mol) exhibited the best degradation effect on TC, and 1 mmol/L of H₂O₂ and 398.73 mW/cm² of light were the optimum parameters. A p-n heterojunction was formed in 1FMW, ensuring the stability of composite and the fast electron transfer. Holes, •O₂^- and •OH were generated in photo-Fenton process and participated in TC degradation. Notably, FMW can be recycled quickly under an external magnetic field due to its magnetic properties. Overall, FMW shows good catalytic stability and recoverability in photo-Fenton oxidation process, which has a broad application prospect.

MOF-derived electrochemical catalyst Cu-N/C for the enhancement of amperometric oxygen detection

Electrochemical sensors using ionic liquids as electrolytes for oxygen detection are now getting more and more attention. Recently, an ionic liquid combined with an electrochemically active catalyst system has become popular for boosting the sensing performance of oxygen sensors. In this work, the imidazolyl-based ionic liquid 1-butyl-2,3-dimethylimidazole bis((trifluoromethyl)sulfonyl)imide [Bmmim][TFSI] is first prepared by a facile two-step method. Subsequently, a transition metal and N-codoped porous carbon oxygen reduction electrochemical catalyst Cu-N/C is synthesized by calcining the Cu-doped ZIF-8 precursor and then blending it in different ratios with the ionic liquid [Bmmim][TFSI] as composite electrolytes for oxygen detection. The composite electrolyte Cu-N/C/[Bmmim][TFSI] exhibits increased responses in cyclic voltammetry (CV) and chronoamperometry (CA) relative to that of the pure ionic liquid. Furthermore, the CV and CA data show that 6% Cu-N/C/[Bmmim][TFSI] has the optimum oxygen sensing response with an enhanced reduction peak current, a sensitivity of 0.1678 μA/[% O₂] and a good linear fitting coefficient of 0.9991. In conclusion, the results confirm the success of using Cu-N/C as an electrochemical catalyst composed of the Cu-N/C/[Bmmim][TFSI] electrolyte for improving the responsivity, stability and sensitivity towards a wide range of oxygen concentrations.

Single-pot tandem oxidative/C-H modification amidation process using ultrasmall PdNP-encapsulated porous organosilica nanotubes

Herein, we studied a single-pot method with a dual catalysis process towards the conversion of primary aromatic alcohols to amides using ultrasmall PdNPs of controlled uniform size (1.8 nm) inside hybrid mesoporous organosilica nanotubes (MO-NTs). The catalyst exhibited excellent performance in water under mild conditions and showed high stability. The catalytic activity towards the tandem oxidation of alcohols in the presence of amine salts and H2O2 to their corresponding amides without producing byproducts was evaluated, and high yields were obtained for all products. The structure of the organosilica nanotubes containing palladium nanoparticles was investigated using various characterization techniques such as XRD, TEM, BET, solid-state 29Si NMR and solid-state 13C CP MAS NMR. Catalyst recycling tests showed that the catalytic power of PdNPs@B-SNTs was preserved after 8 cycles and a slight decrease in catalyst activity was observed.

Ratiometric electrochemical sensor for bisphenol A detection using a glassy carbon electrode modified with a poly(toluidine blue)/gold nanoparticle composite

A ratiometric electrochemical sensor for bisphenol A (BPA) detection is developed using a glassy carbon electrode modified with a poly(toluidine blue)/gold nanoparticle composite (PTB/AuNP/GCE). The ratiometric signal, namely, the oxidation peak current ratio of BPA to PTB, increases linearly with BPA concentration in the 0.2-5.0 μM range, with a detection limit of 0.15 μM. The electrochemical mechanism of BPA is studied at the PTB/AuNP/GCE, and the results show that BPA undergoes an electrooxidation process of two electrons and two protons at the PTB/AuNP/GCE. The proposed sensor has high sensitivity, high stability and good selectivity. The application of BPA in water samples is successfully verified using the proposed ratiometric electrochemical sensor.