Pectin films loaded with copaiba oil nanoemulsions for potential use as bio-based active packaging

Citrus oil gland and cuticular wax inspired multifunctional gelatin film of OSA-starch nanoparticles-based nanoemulsions for preserving perishable fruit

Inspired by the citrus oil gland and cuticular wax, a multifunctional material that stably and continuously released the carvacrol and provided physical defenses was developed to address issues of fresh-cut fruits to microbial infestation and moisture loss. The results confirmed that low molecular weight and loose structure of starch nanoparticles prepared by the ultrasound-assisted Fenton system were preferable for octenyl succinic anhydride modification compared to native starch, achieving a higher degree of substitution (increased by 18.59 %), utilizing in preparing nanoemulsions (NEs) for encapsulating carvacrol (at 5 % level: 81.58 %). Furthermore, the NEs-based gelatin (G) film improved with surface hydrophobic modification by myristic acid (MA) successfully replicated the citrus oil gland and cuticular wax, providing superior antioxidant (enhanced by 3-4 times) and antimicrobial properties (95.99 % and 84.97 % against Staphylococcus aureus and Escherichia coli respectively), as well as the exceptional UV shielding (nearly 0 transmittance in the UV region), mechanical (72 % increase in tensile strength), and hydrophobic (WCA 133.63°). Moreover, the 5%NE-G@MA film inhibited foodborne microbial growth (reduced by 50 %) and water loss (controlled below 15 %), extending the shelf life of fresh-cut navel orange and kiwi. Thus, the multifunctional film was a potential shield for preserving perishable fresh-cut products.

Characterization of sodium alginate film containing zein-Arabic gum nanoparticles encapsulated with oregano essential oil for chilled pork packaging

Chilled pork retains most of its nutrients but is prone to deterioration during the production-to-consumption process. To address this issue this study aimed to develop zein-Arabic gum composite nanoparticles loaded with oregano essential oil (ZAG-OEO) and incorporate them into sodium alginate films to enhance the freshness and shelf life of chilled pork. Sodium alginate, known for its excellent film-forming properties, was selected as the matrix to prepare ZAG-OEO-containing sodium alginate films (SA-ZAG-OEO). The results revealed that the tensile strength and elongation at break of the prepared films were 47.73 ± 2.15 MPa and 6.27 ± 0.21 %, respectively, at a 2.5 % nanoparticle concentration. The water contact angle of the films incorporating nanoparticles reached 81.5 ± 1.95°. The incorporation of nanoparticles enhanced the thermal stability and antibacterial activity of the films. The prepared films were utilized for the storage of chilled pork, and the quality changes were analyzed. The results demonstrate that SA-ZAG-OEO films inhibit microbial growth and lipid oxidation, thereby delaying pork spoilage. This study offers new insights into extending the shelf life of chilled pork and developing advanced meat preservation methods for the future development of the meat industry.

Advances in biomaterials based food packaging systems: Current status and the way forward

World hunger is getting worse, while one-third of food produced around the globe is wasted and never consumed. It is vital to reduce food waste to promote the sustainability of food systems, and improved food packaging solutions can augment this effort. The utilization of biomaterials in smart food packaging not only enhances food preservation and safety but also aligns with current demands for eco-friendly technologies to mitigate the impacts of climate change. This review provides a comprehensive overview of the developments in the field of food packaging based on the innovative use of biomaterials. It emphasizes the potential use of biomaterials derived from nature including cellulose, chitosan, keratin, etc. for this purpose. Various smart food packaging technologies such as active and intelligent packaging are discussed in detail including scavenging additives, colour-changing environment indicators, sensors, RFID tags, etc. The article also delves into the utilization of edible films and coatings, nanoparticle fillers and 2D materials in food packaging systems. Furthermore, it outlines the challenges and opportunities in this dynamic domain, emphasizing the ongoing need for research and innovation to shape the future of sustainable and smart food packaging solutions to enhance and monitor the shelf-life of food products.

Application of Natural Functional Additives for Improving Bioactivity and Structure of Biopolymer-Based Films for Food Packaging: A Review

The global trend towards conscious consumption plays an important role in consumer preferences regarding both the composition and quality of food and packaging materials, including sustainable ones. The development of biodegradable active packaging materials could reduce both the negative impact on the environment due to a decrease in the use of oil-based plastics and the amount of synthetic preservatives. This review discusses relevant functional additives for improving the bioactivity of biopolymer-based films. Addition of plant, microbial, animal and organic nanoparticles into bio-based films is discussed. Changes in mechanical, transparency, water and oxygen barrier properties are reviewed. Since microbial and oxidative deterioration are the main causes of food spoilage, antimicrobial and antioxidant properties of natural additives are discussed, including perspective ones for the development of biodegradable active packaging.

Enhancing the antioxidant properties and compatibility of protein/sodium alginate film by incorporating Zanthoxylum bungeanum essential oil Pickering emulsion

Zanthoxylum bungeanum essential oil (ZBEO) Pickering emulsion was incorporated into rice protein (RP)/sodium alginate (SA)-based film to enhance the antioxidant activity and compatibility. With increasing ZBEO content from 2 % to 4 %, the average size of ZBEO Pickering emulsion ranged from 124.28 to 165.65 nm. The best mechanical property with a tensile strength of 14.56 MPa and hydrophobicity with a water vapor permeability of 2.11 × 10-12 g⋅cm-1⋅s-1⋅Pa-1 of emulsion film were achieved with 0.8 % ZBEO. In addition, the loss of ZBEO in the emulsion films was reduced by 11-14 %. The DPPH radical scavenging activity of emulsion film with 1.2 % ZBEO was 65.54 % in 95 % ethanol. The results of Fourier transform infrared spectroscopy and molecular dynamics simulation showed that electrostatic interactions played a leading role in film formation. Overall, ZBEO Pickering emulsion is an effective method to enhance the antioxidant activity, mechanical strength and hydrophobicity of RP/SA film.

Pectin/sodium alginate-based active film integrated with microcrystalline cellulose and geraniol for food packaging applications

Biopolymer-based packaging films were prepared from pectin (PEC) and sodium alginate (SA), with the incorporation of 10 % MCC and different concentrations of geraniol (GER at 2.5, 5.0, 7.5, and 10.0 %). Rheological properties suggested that film-forming solutions and film-forming emulsions exhibited a shear-thinning or pseudo-plastic non-Newtonian behaviour. The dried films were crosslinked with 2.0 % CaCl2. The addition of MCC into PEC/SA film enhanced the TS but reduced it with the impregnation of GER without influencing the EAB and toughness of the film. The water solubility of the films significantly reduced with the rise in the GER levels but enhanced the water vapor and oxygen barrier attributes. TGA demonstrated that incorporating MCC reduced the film's thermal degradation (44.92 % to 28.81 %), but GER had an insignificant influence on the thermal stability. FTIR spectra revealed that hydrogen bond formation was positively linked with the GER addition in the film formulation. X-ray diffractograms showed that prepared films were predominantly amorphous. Antimicrobial studies showed a complete reduction of Escherichia coli and Bacillus cereus in 24 h. Overall, the composite film displayed excellent physical and active properties and PEC/SA/MCC/5.0 %GER/CaCl2 film was considered the best formulation for food packaging applications.

Konjac glucomannan films incorporated pectin-stabilized Mandarin oil emulsions: Structure, properties, and application in fruit preservation

To enhance the water-resistance and antibacterial properties of KGM films, mandarin oil (MO), was directly emulsified by pectin and then dispersed to the KGM matrix. The effect of MO concentration (0, 0.5, 1.0, 1.5, and 2 wt%) on the performance of the film-forming emulsions as well as the emulsion films was investigated. The results revealed that pectin could encapsulate and protect MO, and KGM as film matrix could further contributed to the high stability of the film-forming emulsions. The FT-IR, XRD, and SEM suggested that MO stabilized by pectin was uniformly distributed in the KGM matrix. The compatibility and good interaction between KGM and pectin contributed to highly dense and compact structure. Furthermore, increasing the concentration of MO effectively improved water-resistance, oxygen barrier, and antimicrobial activity of the KGM based films. The 1.5 wt% MO loaded KGM film had the highest tensile strength (72.22 MPa) and water contact angle (θ = 95.73°), reduced the WVP and oxygen permeability by about 25.8 % and 32.8 times, respectively, prolonged the shelf life of strawberries for 8 days. As demonstrated, the 1.5 wt% MO-loaded KGM film has considerable potential for high-performance natural biodegradable active films to ensure food safety and reduce environmental impacts.

Gelatin/agar pH-indicator film based on cranberry extract loaded with linalool nanoparticle: Survey on physical, antimicrobial, and antioxidant properties

In this study, linalool-nanoparticles (L-NPs) were prepared (encapsulation efficiency was 68.54 %) and introduced pH-indicator film based on cranberry-extract (CEF) to develop multifunctional smart films. XRD analysis and FTIR spectroscopy indicated that cranberry-extract (CE) and L-NPs were uniformly distributed in the gelatin/agar matrix and could change the intermolecular structure of the film. Color change of smart films showed that CE endowed the film with pH-sensitive property. As CE and L-NPs were added to the film, the water contact angle (WCA) was increased from 57.03° to 117.73°, the elongation at break (EAB) was increased from 12.30 % to 34.60 %. Additionally, the introduction of L-NPs enhanced the antioxidant activity (DPPH free radical scavenging rate increased from 26.80 % to 36.35 %) and antibacterial activity (against S. aureus and E. coli) of the smart film, which were verified by its retarding effect on pork spoilage.

Chitosan/alginate/pectin biopolymer-based Nanoemulsions for improving the shelf life of refrigerated chicken breast

This study investigated the use of nanoemulsions and various polymer coatings to enhance the quality and shelf life of chicken breast. This comprehensive study explored the antibacterial activity of essential oils (EOs) against Escherichia coli and Staphylococcus aureus, as well as the characterization of nanoemulsions (Nes) and nanoemulsion-based coatings. The antimicrobial potential of EOs, such as cinnamon, tea tree, jojoba, thyme, and black cumin seed oil, was evaluated against microorganisms, and thyme oil exhibited the highest inhibitory effect, followed by cinnamon and tea tree oil by disk diffusion analysis. The MIC and MBC values of EOs were found between 0.16-2.5 mg/mL and 0.16-5 mg/mL, respectively, while thyme EO resulted in the lowest values showing its antimicrobial potential. Then, the essential oil nanoemulsions (EONe) and their coatings, formulated with thyme oil, alginate, chitosan, and pectin, were successfully characterized. Optical microscope observations confirmed the uniform distribution of droplets in all (EONe), while particle size analysis demonstrated multimodal droplet size distributions. The EONe-chitosan coating showed the highest efficacy in reducing cooking loss, while the EONe-chitosan, EONe-alginate, and EONe-pectin coatings displayed promising outcomes in preserving color stability. Microbial analysis revealed the significant inhibitory effects of the EONe-chitosan coating against mesophilic bacteria, psychrophilic bacteria, and yeasts, leading to an extended shelf life of chicken breast. These results suggest the potential application of thyme oil and NE-based coatings in various industries for antimicrobial activity and quality preservation.

Effect of clove essential oil nanoemulsion on physicochemical and antioxidant properties of chitosan film

This study evaluated the physicochemical and antioxidant properties of clove essential oil (0, 0.2, 0.4, 0.6, 0.8, 1.0 % v/v) nanoemulsion (CEON) loaded chitosan-based films. With the increasing concentrations of the CEON, the thickness, b* and ΔE values of the films increased significantly (P < 0.05), while L* and light transmission dropped noticeably (P < 0.05). The hydrogen bonds formed between the CEON and chitosan could be demonstrated through Fourier-transform infrared spectra, indicating their good compatibility and intermolecular interactions. Furthermore, the added CEON considerably reduced the crystallinity and resulted in a porous structure of the films, as observed through X-ray diffraction plots and scanning electron microscopy images, respectively. This eventually led to a drop in both tensile strength and moisture content of the films. Moreover, the antioxidant properties were significantly enhanced (P < 0.05) with the increase in the amount of clove essential oil (CEO) due to the encapsulation of CEO by the nanoemulsion. Films containing 0.6 % CEO had higher elongation at break, higher water contact angle, lower water solubility, lower water vapor permeability, and lower oxygen permeability than the other films; therefore, such films are promising for application in meat preservation.

Monitor the freshness of shrimp by smart halochromic films based on gelatin/pectin loaded with pistachio peel anthocyanin nanoemulsion

This paper focuses on the combination of gelatin (Gel), pectin (Pec), and Pistachio peel anthocyanins (PSAs) to develop a halochromic film for food applications (shrimp). The results of spectroscopic properties showed that the film components had proper interaction and compatibility. Furthermore, the addition of PSAs and Pec improved the thermal stability of films. The addition of Pec and PSAs significantly improved the physical properties and mechanical resistance of the films. So that, the permeability to water vapor and oxygen reduced from 2.81 to 2.74 (g‧s-1‧Pa-1‧m-1) and 5.25 to 4.70 (meq/kgO2), respectively. In addition, the strength and flexibility of halochromic film reached 0.7 MPa and 56 % compared to Gel film (0.62 MPa, and 46.96 %). Most importantly, the color changes of the smart film from cherry/pink to yellow/brown, which were proportional to the color changes of the anthocyanin solution at different pHs, were able to monitor the shrimp freshness and spoilage at room (20 °C) and refrigerated (4 °C) temperature for 14 days.

Exploring the potential of jujube seed powder in polysaccharide based functional film: Characterization, properties and application in fruit preservation

In this study, we fabricated a novel biodegradable functional film using natural polysaccharides by adding jujube seed powder as an active ingredient. Scanning electron microscopy analysis showed agglomerate formation in the film with increasing concentration of seed powder. Fourier transform-infrared spectroscopy study demonstrated an electrostatic interaction between pectin and chitosan. The water solubility and swelling degree significantly decreased from 55.5 to 47.7 % and 66.0 to 41.9 %, respectively, depicting the film's water resistance properties. Higher opacity and lower transmittance value of the film indicated its protective effect towards light-induced oxidation of food. It was observed that the fabricated active film biodegraded to 82.33 % in 6 days. The DPPH radical scavenging activity of 98.02 % was observed for the functional film. The film showed antifungal activity against B. cinerea and P. chrysogenum. The highest zone of inhibition was obtained against food spoiling bacteria B. subtilis followed by S. aureus, P. aeruginosa and E. coli. Genotoxicity studies with the fabricated film showed a mitotic index of 8 % compared to 3 % in the control film. We used the fabricated film to preserve grapefruits, and the result showed that it could preserve grapes for ten days with an increase in antioxidant activity and polyphenolic content.

Novel edible films fabricated with HG-type pectin extracted from different types of hybrid citrus peels: Effects of pectin composition on film properties

This study investigated the valorization of novel HG-type hybrid citrus pectins derived from three cultivars: Setoka (ST), Kanpei (KP), and Shiranui (SH), and their application as packaging materials. The physicochemical properties of these pectins and their corresponding films were evaluated and compared to commercial citrus pectin. Significant variations were observed in pectin yield (18.15-24.12 %) and other physicochemical characteristics, such as degree of esterification (DE), degree of methoxylation (DM), and monosaccharide composition, among the different cultivars. All hybrid citrus pectins were classified as high-methoxy pectin types (66.67-72.89 %) with typical structural configurations like commercial citrus pectin. However, hybrid citrus pectin films exhibited superior physical properties, including higher mechanical strength, flexibility, and lower water solubility than commercial citrus pectin film, while maintaining similar transparency and moisture content. Additionally, the films displayed smooth and uniform surface morphology, confirming their excellent film-forming properties. Correlation analysis revealed that DE positively influenced mechanical properties (r = 1.0). Furthermore, the monosaccharide composition of pectins showed strong relationships (r = 0.8-1.0) with the film's mechanical and barrier properties. These findings highlight the potential of hybrid citrus pectin as potential packaging material, and the knowledge of the structure-function relationship obtained in this study could be useful for the tailored modification of citrus pectin-based packages.

Development and characterization of sustainable active pectin films: The role of choline chloride/glycerol-based natural deep eutectic solvent and lavender extracts

This study aimed to evaluate the potential effects of choline chloride: glycerol-based natural deep eutectic solvent (NADES) as a plasticizer, NADES extract (NADESext) of lavender as both plasticizer and active ingredient, as well as the lyophilized extract (LE) of lavender at different concentrations (0.5 %, 1 %, and 2 %) on the physical, mechanical, optical, thermal, barrier, morphological, and antioxidant properties of pectin films. The properties of the films were compared to those of the neat pectin film and the film plasticized with glycerol. The addition of plasticizers and LE increased thickness, water vapor permeability, and elongation at break values of the films while decreasing tensile strength and young modulus. Pectin films plasticized with glycerol, NADES, and NADESext had a similar color property but a lower opacity. The use of LE decreased lightness and increased opacity compared to the films with plasticizers. The addition of plasticizers revealed a smoother surface than neat pectin film while LE triggered the formation of agglomerates on the films. Changes in the FTIR spectra of the films showed some interactions between pectin and polyphenols in LE. The plasticizers had an insignificant effect on the antioxidant capacity of films whereas LE improved antioxidant capacity depending on the concentration. In conclusion, the results suggested that pectin films with NADES and LE could be beneficially used to improve antioxidant packaging technology along with acceptable mechanical properties.

Konjac glucomannan/carboxymethyl chitosan film embedding gliadin/casein nanoparticles for grape preservation

Constructing biopolymer-based packaging films with fantastic water resistance and mechanical properties for food preservation is highly desirable and challenging. In this work, Gliadin/Casein nanoparticles (GCNPs) were prepared by pH-driven method and embedded into konjac glucomannan/carboxymethyl chitosan (KC) film matrix to improve the water resistance and mechanical properties of KC film. Gliadin and Casein showed good compatibility and co-assembled to form compact GCNPs clusters through hydrogen bonding and hydrophobic interaction verified by FT-IR spectroscopy, and fluorescence spectroscopy. The particle size and zeta potential of GCNPs was 269.7 nm and -7.6 mV, respectively. The effect of GCNPs on the mechanics, water barrier, thermal stability, and UV-shielding of KC-GCNPs film was investigated. SEM images revealed that GCNPs uniformly distributed into KC film matrix and significantly improved the mechanics (tensile strength: 75.6 MPa, elongation at breaking: 36.7 %), water barrier ability (water contact angle: 91.3°, water vapor permeability: 0.994 g mm/m2 day kPa, water solubility: 52.0 %), thermal stability and UV blocking property of KC-GCNPs film. Furthermore, KC-GCNPs film could also be applied to extend the shelf life of grapes. This paper demonstrated the great potential of GCNPs as functional nanofillers in enhancing the physicochemical properties of KC film.

Films Based on Biopolymers Incorporated with Active Compounds Encapsulated in Emulsions: Properties and Potential Applications-A Review

The rising consumer demand for safer, healthier, and fresher-like food has led to the emergence of new concepts in food packaging. In addition, the growing concern about environmental issues has increased the search for materials derived from non-petroleum sources and biodegradable options. Thus, active films based on biopolymers loaded with natural active compounds have great potential to be used as food packaging. However, several lipophilic active compounds are difficult to incorporate into aqueous film-forming solutions based on polysaccharides or proteins, and the hydrophilic active compounds require protection against oxidation. One way to incorporate these active compounds into film matrices is to encapsulate them in emulsions, such as microemulsions, nanoemulsions, Pickering emulsions, or double emulsions. However, emulsion characteristics can influence the properties of active films, such as mechanical, barrier, and optical properties. This review addresses the advantages of using emulsions to encapsulate active compounds before their incorporation into biopolymeric matrices, the main characteristics of these emulsions (emulsion type, droplet size, and emulsifier nature), and their influence on active film properties. Furthermore, we review the recent applications of the emulsion-charged active films in food systems.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

Integrating the latest biological advances in the key steps of a food packaging life cycle

This literature review provides a focus on the potential of integrating the latest scientific and technological advances in the biological field to improve the status of the key steps of a food packaging life cycle: production, usage, post-usage, and long-term fate. A case study of such multi-biological food packaging is demonstrated based on the use of PHAs (polyhydroxyalkanoates) polymer, a microbiologically produced polymer from non-food renewable resources, activated by the use of bioactive components to enhance its usage benefits by reducing food loss and waste, displaying potential for reusability, compostability as post-usage, and finally, being ultimately biodegradable in most common natural conditions to considerably reduce the negative impact that persistent plastics have on the environment. We discuss how designing safe and efficient multi "bio" food packaging implies finding a compromise between sometimes contradictory functional properties. For example, active antimicrobials help preserve food but can hamper the ultimate biodegradation rate of the polymer. This review presents such antagonisms as well as techniques (e.g., coatings, nanoencapsulation) and tools (e.g., release kinetic) that can help design optimized, safe, and efficient active food packaging.

Formulation of Edible Coatings from Alfalfa Saponins to Enhance the Postharvest Quality of Tomatoes

Tomatoes are a major crop for global exports and have significant nutritional benefits. However, their lifespan is limited due to various biotic and abiotic factors. This study aimed to formulate an edible coating using crude alfalfa saponins coupled with decaglycerol monolaurate (ML-750) and polyoxyethylene (20) sorbitan monolaurate (Tween 20), to enhance the postharvest quality and shelf life of tomatoes by preventing spoilage. The effectiveness of alfalfa saponins coatings, both alone, and with ML-750 and Tween 20, was evaluated by comparing their impact on color, texture, overall acceptability, and % weight loss at 4°C and 25°C for 7 days. Significant improvements were observed in the quality attributes of tomatoes, including firmness, aroma, color, texture, and overall acceptability. Crude alfalfa saponins in emulsified form with Tween 20 increased the shelf stability of tomatoes more effectively than uncoated and ML-750 combined coatings. The total soluble solids (TSS) and pH also play a crucial role in determining the quality of the fruits. The results indicated no significant changes in the TSS of tomatoes coated with encapsulated saponins. Subsequently, a gradual increase in the pH of the coated tomatoes was observed on days 5 and 7, respectively. The findings of this study revealed that alfalfa saponins coupled with synthetic emulsifiers may be a beneficial strategy for prolonging the shelf life and improving the postharvest quality of tomatoes.

Gelatin Improves the Performance of Oregano Essential Oil Nanoparticle Composite Films-Application to the Preservation of Mullet

In this study, the addition of oregano oil chitosan nanoparticles (OEO-CSNPs) was conducted to enhance the comprehensive properties of gelatin films (GA), and the optimal addition ratio of nanoparticles was determined for its application in the preservation of mullet. Oregano oil chitosan nanoparticles were organically combined with gelatin at different concentrations (0%, 2%, 4%, 6% and 8%) to obtain oregano oil-chitosan nanoparticle-GA-based composite films (G/OEO-CSNPs), and thereafter G/OEO-CSNPs were characterized and investigated for their preservative effects on mullet. Subsequent analysis revealed that OEO-CSNPs were uniformly dispersed in the GA matrix, and that G/OEO-CSNPs had significantly improved mechanical ability, UV-visible light blocking performance and thermal stability. Furthermore, the nanoparticles exhibited excellent antioxidant and antibacterial properties, and they improved the films' suitability as edible packaging. The attributes of the G/OEO-CSNPs were optimized, the films had the strongest radical scavenging and lowest water solubility, and electron microscopy also showed nanoparticle penetration into the polymer when the concentration of OEO-CSNPs was 6% (thickness = 0.092 ± 0.001, TS = 47.62 ± 0.37, E = 4.06 ± 0.17, water solubility = 48.00 ± 1.11). Furthermore, the GA-based composite film containing 6% OEO-CSNPs was able to inhibit microbial growth, slow fat decomposition and protein oxidation, reduce endogenous enzyme activity, and delay the spoilage of mullet during the refrigeration process, all of which indicate its excellent potential for meat preservation application.

Biopolymer-Based Sustainable Food Packaging Materials: Challenges, Solutions, and Applications

Biopolymer-based packaging materials have become of greater interest to the world due to their biodegradability, renewability, and biocompatibility. In recent years, numerous biopolymers-such as starch, chitosan, carrageenan, polylactic acid, etc.-have been investigated for their potential application in food packaging. Reinforcement agents such as nanofillers and active agents improve the properties of the biopolymers, making them suitable for active and intelligent packaging. Some of the packaging materials, e.g., cellulose, starch, polylactic acid, and polybutylene adipate terephthalate, are currently used in the packaging industry. The trend of using biopolymers in the packaging industry has increased immensely; therefore, many legislations have been approved by various organizations. This review article describes various challenges and possible solutions associated with food packaging materials. It covers a wide range of biopolymers used in food packaging and the limitations of using them in their pure form. Finally, a SWOT analysis is presented for biopolymers, and the future trends are discussed. Biopolymers are eco-friendly, biodegradable, nontoxic, renewable, and biocompatible alternatives to synthetic packaging materials. Research shows that biopolymer-based packaging materials are of great essence in combined form, and further studies are needed for them to be used as an alternative packaging material.

Electrospun Membrane Based on Poly(L-co-D,L lactic acid) and Natural Rubber Containing Copaiba Oil Designed as a Dressing with Antimicrobial Properties

Drug delivery systems of natural antimicrobial compounds, such as copaiba oil (CO), have become relevant in the scientific community due to the recent prevalence of the public health complications related to antibiotic resistance. Electrospun devices act as an efficient drug delivery system for these bioactive compounds, reducing systemic side effects and increasing the effectiveness of the treatment. In this way, the present study aimed to evaluate the synergistic and antimicrobial effect of the direct incorporation of different concentrations of CO in a poly(L-co-D,L lactic acid) and natural rubber (NR) electrospun membrane. It was observed that CO showed bacteriostatic and antibacterial effects against S. aureus in antibiogram assays. The prevention of biofilm formation was confirmed via scanning electron microscopy. The test with crystal violet demonstrated strong bacteria inhibition in membranes with 75% CO. A decrease in hydrophilicity, observed in the swelling test, presented that the addition of CO promotes a safe environment for the recovery of injured tissue while acting as an antimicrobial agent. In this way, the study showed strong bacteriostatic effects of the CO incorporation in combination with electrospun membranes, a suitable feature desired in wound dressings in order to promote a physical barrier with prophylactic antimicrobial properties to avoid infections during tissue healing.

Combining Chitosan Nanoparticles and Garlic Essential Oil as Additive Fillers to Produce Pectin-Based Nanocomposite Edible Films

Edible films were produced by combining a pectin (PEC) matrix with chitosan nanopar-ticle (CSNP), polysorbate 80 (T80), and garlic essential oil (GEO) as an antimicrobial agent. CSNPs were analyzed for their size and stability, and the films, throughout their contact angle, scanning electron microscopy (SEM), mechanical and thermal properties, water vapor transmission rate, and antimicrobial activity. Four filming-forming suspensions were investigated: PGEO (control); PGEO@T80; PGEO@CSNP; PGEO@T80@CSNP. The compositions are included in the methodology. The average particle size was 317 nm, with the zeta potential reaching +21.4 mV, which indicated colloidal stability. The contact angle of the films exhibited values of 65°, 43°, 78°, and 64°, respec-tively. These values showed films with variations in hydrophilicity. In antimicrobial tests, the films containing GEO showed inhibition only by contact for S. aureus. For E. coli, the inhibition occurred in films containing CSNP and by direct contact in the culture. The results indicate a promising al-ternative for designing stable antimicrobial nanoparticles for application in novel food packaging. Although, it still shows some deficiencies in the mechanical properties, as demonstrated in the elongation data.

A hydroxypropyl methylcellulose/hydroxypropyl starch nanocomposite film reinforced with chitosan nanoparticles encapsulating cinnamon essential oil: Preparation and characterization

Active packaging derived from polysaccharides plays an important role in prolonging the shelf life of food. In this study, cinnamon essential oil (CEO)-loaded chitosan nanoparticles (CNs) were prepared and embedded in hydroxypropyl methylcellulose (HPMC)/hydroxypropyl starch (HPS) blends to enhance the physicochemical and biofunctional properties of the formed films. Different concentrations (25, 50, 75, and 100 μL/mL) of CEOs were encapsulated with CNs to form CEO-CNs, as confirmed by Fourier Transform Infrared Spectrometer (FTIR), X-Ray Diffraction (XRD), and scanning electron microscope (SEM) images. The prepared CEO-CNs were incorporated into the HPMC/HPS film-forming matrix to prepare reinforced nanocomposite films. SEM images showed that the CEO-CNs were dispersed in the HPMC/HPS matrix, thus filling the void space in the composite matrix and significantly improving the mechanical and barrier properties of the bio-nanocomposite films. The elongation at break of the reinforced films improved from 8.54 ± 0.53 MPa to 24.81 ± 0.47 MPa, and the water vapor permeability was reduced by nearly 30 %. FTIR and XRD analyses indicated the formation of hydrogen bonds between CEO-CNs and HPMC/HPS polymer molecules. Release studies showed that the nanocomposite film was capable of sustained release of CEO, which imparted antioxidant (radical scavenging activity of 27.66-42.19 %) and antimicrobial properties (inhibition of Escherichia coli and Aspergillus flavus growth). Therefore, these HPMC/HPS nanocomposite films with enhanced properties may have great potential for food preservation.

Fabrication, characterization, and interventions of protein, polysaccharide and lipid-based nanoemulsions in food and nutraceutical delivery applications: A review

The fabrication and application of nanoemulsions for incorporating and delivering diverse bioactive compounds, particularly hydrophobic substances, is becoming an increasing focus of research with the potential to improve the nutritional and health status of individuals. Constant advancements in nanotechnological approaches aid in the creation of nanoemulsions using diverse biopolymers such as proteins, peptides, polysaccharides, and lipids to improve the stability, bioactivity, and bioavailability of active hydrophilic and lipophilic compounds. This article provides a comprehensive overview of various techniques used to create and characterize nanoemulsions as well as theories for understanding their stability. The article also highlights the advancement of nanoemulsions in boosting the bioaccessibility of nutraceuticals to help advance their potential use in various food and pharmaceutical formulations.

Effects of cinnamon essential oil-loaded Pickering emulsion on the structure, properties and application of chayote tuber starch-based composite films

The use of non-conventional starch sources to develop biodegradable and bioactive starch-based films have attracted increasing attention recently. In this study, a nonconventional chayote tuber starch (CTS) was functionalized by zein-pectin nanoparticle-stabilized cinnamon essential oil (CEO) Pickering emulsion (ZPCO) to develop a novel bioactive composite films for food packaging application. Results demonstrated that antibacterial ZPCO featuring long-term stability was successfully obtained. FTIR and SEM analyses suggested that ZPCO have favorable dispersibility and compatibility with CTS matrix. With ZPCO increasing, the transmittance, tensile strength, and moisture content of composite films decreased, whereas their elongation at break, antimicrobial and antioxidant activities increased. ZPCO added at an appropriate level (2 %) can improve water-resistance of the films and reduce water vapor permeability. More importantly, ZPCO can achieve a slower sustained-release of CEO from composite films into food simulants. Furthermore, the composite film containing 2 % ZPCO is safe and nontoxic as proved by cell cytotoxicity test, and it can significantly prolong the shelf life of ground beef by showing the lowest total volatile base nitrogen and best acceptable sensory characteristic. Overall, the incorporation of ZPCO into CTS films offers a great potential application as a bioactive material in the food packing.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Preparation of an indicator film based on pectin, sodium alginate, and xanthan gum containing blueberry anthocyanin extract and its application in blueberry freshness monitoring

An active pH-sensitive film based on pectin-sodium alginate-xanthan gum composite film (PAX) was prepared, containing blueberry anthocyanin extract (BAEs), to monitor the freshness of blueberries. The effects of different contents of BAEs on the microstructure and physical properties of intelligent polysaccharide films were comprehensively evaluated. It was found that 75-BAEs-PAX film had a solid response to pH value and showed different and easily distinguishable colors at different pH values. In addition, when the freshness of blueberries stored at different temperatures (-1 °C, 4 °C, 10 °C, 15 °C, 25 °C) was monitored, the color of 75-BAEs-PAX film changed from purple to light pink from neutral to acidic environment, which was consistent with the change of pH value of blueberries from fresh to spoilage. The Arrhenius equation verified that the difference between the activation energy of the indicator film and the blueberry quality was less than 25 kJ/mol. Therefore, the 75-BAEs-PAX film can be used as an indicator film for blueberries freshness monitoring. In this study, the freshness of blueberries was monitored by BAEs, and the purpose of using ontology to monitor ontology was achieved. The freshness of blueberries was visualized during storage and transportation, which could effectively reduce the waste of blueberries. In the future, the method of ontology monitoring ontology could be extended to other foods.

Recent progress in pectin extraction and their applications in developing films and coatings for sustainable food packaging: A review

Perishable foods like fruits and vegetables, meat, fish, and dairy products have short shelf-life that causes significant postharvest losses, which poses a major challenge for food supply chains. Biopolymers have been extensively studied as sustainable alternatives to synthetic plastics, and pectin is one such biopolymer that has been used for packaging and preservation of foods. Pectin is obtained from abundantly available low-cost sources such as agricultural or food processing wastes and by products. This review is a complete account of pectin extraction from agro-wastes, development of pectin-based composite films and coatings, their characterizations, and their applications in food packaging and preservation. Compared to conventional chemical extraction, supercritical water, ultrasound, and microwave assisted extractions are a few examples of modern and more efficient pectin extraction processes that generate almost no hazardous effluents, and thus, such extraction techniques are more environment friendly. Pectin-based films and coatings can be functionalized with natural active agents such as essential oils and other phytochemicals to improve their moisture barrier, antimicrobial and antioxidant properties. Application of pectin-based active films and coatings effectively improved shelf-life of fresh cut-fruits, vegetables, meat, fish, poultry, milk, and other food perishable products.

Optimization of citron peel pectin and glycerol concentration in the production of edible film using response surface methodology

Pectin-based edible film plasticized with glycerol has been developed, and the effect of pectin and glycerol concentration was optimized using response surface methodology for better mechanical properties and transparency. The upper and lower concentration of pectin (3-5 g) and glycerol (15%-25%) concentration ranges were considered in this study based on the preliminary experiment. The responses of the edible film determined were tensile strength, elongation at break and elastic modulus and opacity. The interaction effects of glycerol and pectin concentrations on edible film properties significantly affected the film properties. Tensile strength and opacity were positively affected by pectin concentrations; however, elastic modulus and elongation at break were negatively affected. Glycerol concentration negatively affected the edible film's tensile strength and elastic modulus. The decrease in the opacity of the biofilm was observed as the pectin concentration increased; however, glycerol had not shown a significant influence on opacity. The numerical optimization provided 4 g of pectin, and 20% of glycerol showed a strong and transparent edible film. The TGA curve showed that the maximum weight loss occurred between the temperatures 250-400 °C due to the loss of polysaccharides. From FTIR analysis, observed peaks around 1037 cm-1 represented the C-O-C stretching vibrations of the saccharide found in pectin and glycerol.

Copaiba essential oil loaded-nanocapsules film as a potential candidate for treating skin disorders: preparation, characterization, and antibacterial properties

Infections have emerged as a novel target in managing skin and mucosa diseases. Bacterial resistance to antimicrobials and biofilm elimination from surfaces remains a challenge. Because polymeric nanocapsules (NC) can increase antimicrobial activity, this study aimed to produce and characterize NC into chitosan films (CSF). Copaiba essential oil (CO) presents antimicrobial activity and was chosen to load NC. In addition, the antibacterial activity was evaluated to obtain a new biodegradable polymeric platform system with the potential to treat topical diseases associated with bacterial infections. The CO-NC produced by nanoprecipitation presented particle size lower than 250 nm, negative charge, and encapsulation efficiency higher than 70 %. Direct incorporation of CO into CSF (CO-CSF) by casting method worsened the film's characteristics. However, incorporating CO-NC into CSF (CO-NC-CSF) avoided these drawbacks demonstrating improved physical, mechanical, morphological, and topographical properties. FTIR results demonstrated possible intermolecular interactions among the polymers and CO. The CO-NC-CSF and CO-CSF presented antibacterial properties against Staphylococcus aureus, and Pseudomonas aeruginosa, especially the formulation containing 1 % of CO. These results indicated that CO-NC-CSF is a promising candidate for treating skin disorders.

Copaiba Oil-Based Emulsion as a Natural Chemotherapeutic Agent for the Treatment of Bovine Mastitis: In Vivo Studies

Copaiba oil-resin (COR) extracted from Copaifera reticulata Ducke has been used as a natural chemotherapeutic agent for a wide range of therapeutic applications. This study presents an emulgel design with a high concentration of COR, designed to prevent and treat mastitis. The COR was stabilized in a gel matrix constituted by carbopol C934P and Pluronic^® F127 (ECO formulation) ratios. The permeation study of ECO was accessed by Fourier transform infrared photoacoustic spectroscopy (FTIR-PAS). The results reveal a high capacity of ECO to permeate deep skin layers. Dairy cows with a history of mastitis were used as in vivo models and exposed to ECO treatment. Monitoring of the teat's inflammatory response showed that ECO effectively prevents mastitis. Furthermore, the ECO formulation was able to form a thin film gel on the application side, preventing fly proliferation and significantly reducing the pathogen load. This study reveals a drug that can used as an alternative application for mastitis in human or veterinary clinics.

Thermo and Photoresponsive Emulgel Loaded with Copaifera reticulata Ducke and Chlorophylls: Rheological, Mechanical, Photodynamic and Drug Delivery Properties in Human Skin

Recently, the number of new cases of cutaneous leishmaniasis has been of concern among health agencies. Research that offers new therapeutic alternatives is advantageous, especially those that develop innovative drugs. Therefore, this paper presents the incorporation of Copaifera reticulata Ducke and chlorophyll extract into Pluronic^®® F127 and Carbopol gels, under optimized polymer quantities. The chlorophyll extract (rich in photosensitizing compounds) was obtained by continuous-flow pressurized liquid extraction (PLE), a clean, environmentally friendly method. The system aims to act as as a leishmanicidal, cicatrizant, and antibiotic agent, with reinforcement of the photodynamic therapy (PDT) action. Rheological and mechanical analyses, permeation studies and bioadhesiveness analyses on human skin, and PDT-mediated activation of Staphylococcus aureus were performed. The emulgels showed gelation between 13° and 15 °C, besides pseudoplastic and viscoelastic properties. Furthermore, the systems showed transdermal potential, by releasing chlorophylls and C. reticulata Ducke into the deep layers of human skin, with good bioadhesive performance. The application of PDT reduced three logarithmic colony-forming units of S. aureus bacteria. The results support the potential of the natural drug for future clinical trials in treating wounds and cutaneous leishmania.

Development and Characterization of Biocomposite Films Based on Polysaccharides Derived from Okra Plant Waste for Food Packaging Application

Polysaccharide-based composite films were developed using mucilage polysaccharides (OLP) and carboxymethyl cellulose (CMC) extracted from okra leafstalk wastes. The rheological properties of biocomposite OLP/CMC film-forming solutions were characterized using the Power-law model, and fabricated films were characterized for their potential food packaging applications. OLP/CMC solutions exhibited pseudo-plastic fluid characteristics and differences in rheological behavior (n, 0.478-0.743), and flow consistency (K, 1.731-9.154) with increasing content of OLP (5 to 30 % w/w of CMC) were associated with variations in the physical, mechanical, and barrier properties of films. Surface hydrophobicity (24%) increased and oxygen (39%) and water vapor (32%) permeability reduced in OLP/CMC films containing up to 10% OLP. Moreover, a higher content of OLP enhanced the antioxidant activity and thermal stability of OLP/CMC films. Subsequently, OLP/CMC was applied as a coating to preserve cherry tomatoes for 14 days at 30 °C. Quality deterioration characterized by high weight loss (22%), firmness loss (74.62%), and discoloration (∆E, 21.26) occurred in uncoated tomatoes and were within unusable/unmarketable limits based on their visual quality score. In contrast, OLP/CMC effectively minimized quality losses, and coated tomatoes exceeded the limit of marketability after 14 days of storage. This study successfully applied value-added polysaccharides derived from okra plant residues for edible food packaging.

Antimicrobial and Antioxidant Activity of Apricot (Mimusopsis comersonii) Phenolic-Rich Extract and Its Application as an Edible Coating for Fresh-Cut Vegetable Preservation

Edible coatings have several advantages in preserving foods, such as avoiding water loss, controlling microbial growth, and reducing the need for preservatives added directly to the product. Antimicrobial action can be obtained by adding antimicrobial substances including phenolic compounds commonly found in plant extracts. This study evaluated the phenolic compounds content, antioxidant and antimicrobial activity of pulp, and seed extracts of Mimusopsis comersonii (popularly known in Brazil as abrico), besides the phenolic compounds were identified and quantified in the pulp extract. Edible coatings were incorporated with pulp extract in order to evaluate the preservation of minimally processed apples and baroa potatoes against foodborne bacteria, and enzymatic browning was also determined. Myricetin-3-glucoside, quercetin-3-glucoside, and kaempferol-3-glucoside were identified as major flavonoids in the apricot pulp extract. The seed and pulp extracts inhibited all tested microorganisms, especially Staphylococcus aureus and Salmonella Typhimurium. Edible coatings added with 9% of phenolic extract showed in vitro antimicrobial activity, in addition to being effective in preventing enzymatic browning in minimally processed apples and baroa potatoes for up to 15 days of storage. They were also effective in reducing up to 2 log CFU/g of aerobic mesophiles after 15 days of storage for apples, even though no microbial inhibition in baroa potatoes was observed under the same conditions. The addition of pulp phenolic extract in edible coatings proved to be an alternative in the preservation of apples and in the antibrowning activity of minimally processed baroa potatoes.

Current Advancements in Pectin: Extraction, Properties and Multifunctional Applications

Pectin is a heterogeneous hydrocolloid present in the primary cell wall and middle lamella in all dicotyledonous plants, more commonly in the outer fruit coat or peel as compared to the inner matrix. Presently, citrus fruits and apple fruits are the main sources for commercial extraction of pectin, but ongoing research on pectin extraction from alternate fruit sources and fruit wastes from processing industries will be of great help in waste product reduction and enhancing the production of pectin. Pectin shows multifunctional applications including in the food industry, the health and pharmaceutical sector, and in packaging regimes. Pectin is commonly utilized in the food industry as an additive in foods such as jams, jellies, low calorie foods, stabilizing acidified milk products, thickener and emulsifier. Pectin is widely used in the pharmaceutical industry for the preparation of medicines that reduce blood cholesterol level and cure gastrointestinal disorders, as well as in cancer treatment. Pectin also finds use in numerous other industries, such as in the preparation of edible films and coatings, paper substitutes and foams. Due to these varied uses of pectin in different applications, there is a great necessity to explore other non-conventional sources or modify existing sources to obtain pectin with desired quality attributes to some extent by rational modifications of pectin with chemical and enzymatic treatments.

Valorization of Berries' Agro-Industrial Waste in the Development of Biodegradable Pectin-Based Films for Fresh Salmon (Salmo salar) Shelf-Life Monitoring

The healthy properties of berries are known; however, red fruits are very perishable, generating large losses in production and marketing. Nonetheless, these wastes can be revalued and used. The main objective of this study was the development of biodegradable pectin films with berry agro-industrial waste extracts to monitor salmon shelf-life. The obtained extracts from blueberries, blackberries, and raspberries wastes were evaluated in terms of flavonols, phenols and anthocyanins contents, and antioxidant capacity. Then, pectin films with the extracts of different berries were developed and characterized. The results showed that the blueberry extract film was thicker (0.248 mm), darker (L* = 61.42), and opaquer (17.71%), while the highest density (1.477 g/cm3) was shown by the raspberry films. The results also showed that blueberries were the best for further application due to their composition in bioactive compounds, antioxidant capacity, and color change at different pHs. The salmon samples wrapped in blueberry films showed lower values of pH and deterioration of fish during storage compared to the control and pectin samples. This study contributes to the valorization of berries agro-industrial waste by the development of eco-friendly films that can be used in the future as intelligent food packaging materials contributing to the extension of food shelf-life as a sustainable packaging alternative.

A novel colorimetric indicator film based on watermelon peel pectin and anthocyanins from purple cabbage for monitoring mutton freshness

Novel films based on watermelon peel pectin (WMP) incorporated with purple cabbage extract (PCE) were developed for monitoring the freshness of mutton. The FTIR result showed that WMP and PCE interacted through hydrogen bonds. Low PCE content (≤1.5%) could be well dispersed in the film matrix, resulting in an enhancement in light transmittance, mechanical properties, barrier properties, and thermal stability. Excessive addition of PCE destroyed the compact structure of the film and decreased the comprehensive properties. The antioxidant and antimicrobial activity of WMP/PCE films were proportional to the amount of incorporated PCE. Moreover, the color of the film deepened as the PCE content increased. The film had excellent color stability and pH response properties. The WMP/PCE1.5 film color varied from mauve to baby blue according to the quality of mutton (fresh to spoiled). Our results suggested that the WMP/PCE film might have great potential for monitoring the freshness of mutton.