The in-vitro digestion behaviors of milk proteins acting as wall materials in spray-dried microparticles: Effects on the release of loaded blueberry anthocyanins

Design of a liposome casein hydrogel as an efficient front-end homeostatic anthocyanin loading system

Proteins have been studied and applied to improve the stability of anthocyanins (ACNs), but the changes in the pH microenvironment during the preparation of steady-state systems are often ignored, and more attention is given to the stability of the system after preparation. In this study, we propose the "anthocyanin front-end homeostasis strategy", which involves designing a system can protect anthocyanins under acidic conditions so that more anthocyanin prototypes can be loaded inside the protein. Anthocyanins are encapsulated in liposomes (Lip) at pH 3.0 and combined with casein methacrylate (CSMA) to form Anthocyanin-loaded liposomes/CSMA hydrogel (Lip@ACNs/CSMA), with good physical properties and good blood compatibility. The system increased the hydrogen peroxide scavenging capacity by 1.16 mg Vc equiv./mg ACNs and the cellular antioxidant activity by 17.55 μM quercetin/100 mg ACNs, the photo and thermal storage stability increased by 36.50 % and 30.71 %, the digestive rate increased by 17.50 %, and the biological availability increased by 0.0049 mg/mL. This study designed a liposome casein hydrogel as an efficient front-end homeostatic anthocyanin loading system and provided a new approach for improving the stability of anthocyanins.

Study on stability of rose anthocyanin extracts and physicochemical properties of complex with whey protein isolate after spray drying

Pingyin rose is an edible flower rich in anthocyanins. In this study, antioxidant capacity and color were used as the main evaluation indexes to investigate the effects of common physical and chemical factors on the stability of rose anthocyanin extracts (RAEs). In addition, the physicochemical properties of the whey protein isolate (WPI)-RAEs complex after spray drying were studied. Vitamin C, temperature, and some metal ions can cause different degrees of discoloration of RAEs solution. More importantly, heat treatment, as well as most metal ions and sugars, had no significant effect on the antioxidant capacity of RAEs solution (p > 0.05). Moreover, compared to spray-dried pure WPI, the WPI-RAEs powder was delicate and uniform, and had higher particle size, bulk density, moisture activity, and better gel properties. The release rate of all WPI-RAEs sol/gel to RAEs reached about 89% in the intestinal digestion stage, but the WPI-RAEs interaction reduced the digestibility of protein in the intestinal digestion stage. We hope that this study can provide a theoretical basis for the development and utilization of WPI-RAEs as food ingredients.

New perspective on protein-based microcapsules as delivery vehicles for sensitive substances: A review

Sensitive substances have attracted wide attention due to their rich functional activities, such as antibiosis activities, antioxidant activities and prevent disease, etc. However, the low stability of sensitive substances limits their bioavailability and functional activities. Protein-based microcapsules can encapsulate sensitive substances to improve their adverse properties due to their good stability, strong emulsifying ability and wide source. Therefore, it is necessary to fully elaborate and summarize protein-based microcapsules to maximize their potential benefits in nutritional interventions. The focus of this review is to highlight the classification of protein-based microcapsules. In addition, the principles, advantages and disadvantages of preparation methods for protein-based microcapsules are summarized. Some novel preparation methods for protein-based microcapsules are also emphasized. Moreover, the mechanism of protein-based microcapsules that release sensitive substances in vitro is elucidated and summarized. Furthermore, the applications of protein-based microcapsules are outlined. Protein-based microcapsules can effectively encapsulate sensitive substances, which improve their bioavailability, and provide protective effects during storage and gastrointestinal digestion. In addition, microcapsules can improve the sensory quality of food and enhance its stability. The performance of protein-based microcapsules for delivering sensitive substances is influenced by factors such as protein type, the ratio between protein ratio and the other wall material, the preparation process, etc. Future research should focus on the new composite protein-based microcapsule delivery system, which can be applied to in vivo research and have synergistic effects and precise nutritional functions. In summary, protein-based microcapsules have broader research prospects in the functional foods and nutrition field.

Characterization of Grape Pomace Extract Microcapsules: The Influence of Carbohydrate Co-Coating on the Stabilization of Goat Whey Protein as a Primary Coating

Both grape pomace and whey are waste products from the food industry that are rich in valuable ingredients. The utilization of these two by-products is becoming increasingly possible as consumer awareness of upcycling increases. The biological activities of grape pomace extract (GPE) are diverse and depend on its bioavailability, which is influenced by processes in the digestive system. In this work, goat whey protein (GW) was used as the primary coating to protect the phenolic compounds of GPE during the spray drying process. In addition, trehalose (T), sucrose (S), xylose (X), and maltodextrin (MD) were added to the goat whey proteins as co-coatings and protein stabilizers. All spray drying experiments resulted in microcapsules (MC) with a high encapsulation efficiency (77.6-95.5%) and yield (91.5-99.0%) and almost 100% recovery of phenolic compounds during the release test. For o-coumaric acid, the GW-coated microcapsules (MC) showed a bioavailability index of up to 731.23%. A semi-crystalline structure and hydrophilicity were characteristics of the MC coated with 10% T, S, X, or 5% MD. GW alone or in combination with T, S, MD, or X proved to be a promising carrier for polyphenols from grape pomace extract and ensured good bioavailability of these natural antioxidants.

Riboflavin-loaded soy protein isolate cold gel treated with combination of high intensity ultrasound and high hydrostatic pressure: Gel structure, physicochemical properties and gastrointestinal digestion fate

Transglutaminase (TGase) was added to soy protein isolate (SPI) dispersion after the combination treatment of high intensity ultrasound (HIU) and high hydrostatic pressure (HHP) to catalyze the formation of cold gel, which was used to encapsulate riboflavin. The structure, physicochemical properties and in vitro digestion characteristics of riboflavin-loaded SPI cold gel were investigated. HIU-HHP combined treatment enhanced the strength, water retention, elastic property, thermal stability and protein denaturation degree of riboflavin-loaded SPI cold gels, and improved the gel network structure, resulting in a higher encapsulation efficiency of riboflavin and its chemical stability under heat and light treatment. HIU-HHP combined treatment reduced the erosion and swelling of SPI cold gel in simulated gastrointestinal fluid, and improved the sustained release effect of SPI gel on riboflavin by changing the digestion mode and rate of gel. In addition, HIU-HHP combined treated gels promoted the directional release of riboflavin in the simulated intestinal fluid, thereby improving its bioaccessibility, which was related to the secondary structure orderliness, tertiary conformation tightness and aggregation degree of protein during the gastrointestinal digestion. Therefore, HIU-HHP combined treatment technology had potential application value in improving the protection, sustained/controlled release and delivery of SPI cold gels for sensitive bioactive compounds.

The aggregation of casein micelles induced by Ca2+ during in vitro digestion: effects on the release of loaded anthocyanins

Colloidal calcium phosphate (CCP) confers a modifiable structure to micellar casein (MC), which endows it with potential advantages as a delivery carrier. However, it is difficult to achieve multipattern release of the core material in the intestine with MC as a single wall. In this study, we prepared an anthocyanin-casein-based delivery system utilizing MC with different freezing degrees as the wall material with the objective of achieving the controlled release of anthocyanin as the model core in the intestine. The results showed that freezing could significantly reduce the CCP level up to 50%. Static in vitro simulated digestion with the addition of exogenous Ca2+ showed that the designed delivery system exhibited low anthocyanin release (15%-35%) in the gastric tract. The pattern of release in the intestine depended on the CCP dissociation degree. High and low dissociation degrees corresponded to slow release (from 15% to 65% within 2 h) and burst release (from 35% to 90% within 5 min), respectively. WAXS/SAXS analysis revealed that exogenous serum Ca2+ inherent in simulated gastric fluid and endogenous serum Ca2+ induced by CCP dissociation was synergistically involved in the reconstitution of CCP-mediated nanoclusters and large aggregates. The freezing degree of MC determined the endogenous serum Ca2+ level, which influenced the gastric aggregation behavior of wall MC and ultimately led to a fairly different gastrointestinal release behavior of anthocyanins.

Gastric aggregation of micellar casein powders induced by high hydrostatic pressure: Effect of serum Ca2+ level

Micellar casein (MC) has a unique gastric colloidal behavior in response to Ca2+ cross-linking, and its aggregation properties are closely related to pepsin and gastric acid. In this study, MC with different levels of colloidal calcium phosphate (CCP) was obtained by high hydrostatic pressure (HHP) at different pressures, followed by spray drying to obtain the powders. Different amounts of calcium chloride (exogenous Ca2+) were added to MC powders prior to in vitro simulated digestion to investigate the effect of exogenous serum Ca2+ levels on the aggregation behavior and the structure change of curds generated in gastric tract. The results revealed that HHP induced the emergence of more Ca2+-binding sites, thus Ca2+ was more likely to bind to MC matrix with low CCP levels. Meanwhile, high serum Ca2+ level provided more opportunities to form aggregates. The Highest pressure (500 MPa) with the highest Ca2+ level (5 mM) caused the lowest solubility aggregates, which were only 30% at the end of gastric digestion (120 min), half of the control sample (0 MPa with 0.15 mM Ca2+). The results of wide-angle X-ray scattering / small-angle X-ray scattering suggested that both pepsin and gastric acid-induced aggregation via Ca2+ as a bridge. For pepsin, Ca2+ cross-linked between para-κ-casein; For gastric acid, Ca2+ recombined phosphorylation sites and caused cross-linking of casein subunits.

Natural Sources of Food Colorants as Potential Substitutes for Artificial Additives

In recent years, the demand of healthier food products and products made with natural ingredients has increased overwhelmingly, led by the awareness of human beings of the influence of food on their health, as well as by the evidence of side effects generated by different ingredients such as some additives. This is the case for several artificial colorants, especially azo colorants, which have been related to the development of allergic reactions, attention deficit and hyperactivity disorder. All the above has focused the attention of researchers on obtaining colorants from natural sources that do not present a risk for consumption and, on the contrary, show biological activity. The most representative compounds that present colorant capacity found in nature are anthocyanins, anthraquinones, betalains, carotenoids and chlorophylls. Therefore, the present review summarizes research published in the last 15 years (2008-2023) in different databases (PubMed, Scopus, Web of Science and ScienceDirect) encompassing various natural sources of these colorant compounds, referring to their obtention, identification, some of the efforts made for improvements in their stability and their incorporation in different food matrices. In this way, this review evidences the promising path of development of natural colorants for the replacement of their artificial counterparts.

Microcapsules and Nanoliposomes Based Strategies to Improve the Stability of Blueberry Anthocyanins

Blueberry anthocyanins are water-soluble natural pigments that can be used as both natural antioxidants and natural colorants. However, their structural instability greatly limits their application in the food, pharmaceutical, and cosmetic industries. In this study, blueberry anthocyanin microcapsules (BAM) and blueberry anthocyanin liposomes (BAL) were fabricated based on blueberry anthocyanins. Film dispersion methods were used to prepare the BAL. Their preparation processes were optimized and compared to improve the stability of the blueberry anthocyanins following exposure to light and high temperatures. The BAM were prepared through complex phase emulsification. The blueberry anthocyanins were protected by the shell materials composed of sodium alginate after being formed into BAM. Under the optimal conditions, the embedding rate of BAM and BAL can reach as high as 96.14% and 81.26%, respectively. In addition, the particle size, zeta potential, microtopography, and structure feature information of the BAM and BAL were compared. The average particle sizes of the BAM and BAL were 9.78 μm and 290.2 nm, respectively, measured using a laser particle size analyzer, and the zeta potentials of the BAM and BAL were 34.46 mV and 43.0 mV, respectively. In addition, the optimal preparation processes were determined through single-factor and response surface optimization experiments. The most important factors in the single-factor experiment for the preparation of microcapsules and liposomes were the content of CaCl2 and the amount of anthocyanin. The preservation rates in the light and dark were also compared, and the thermal stabilities of the BAM and BAL were characterized through differential thermal scanning. The results showed that both the BAM and BAL maintained the stability of blueberry anthocyanins, and no significant difference was found between the indices used to evaluate their stability. The results of this study provide theoretical support for the development of effective systems to maintain the stability of anthocyanins, thereby improving their bioavailability after ingestion by humans.

The Release Behavior of Anthraquinones Encapsulated into Casein Micelles during In Vitro Digestion

The degradation of anthraquinones extracted from aloe vera plants can be prevented by encapsulating them in casein micelles (CMs). The oral, gastric, and intestinal digestion behavior of spray-dried microcapsules of casein micelles loaded with aloe vera-extracted anthraquinone powder (CMAQP), freeze-dried powder (CMFDP), and whole-leaf aloe vera gel (CMWLAG) obtained through ultrasonication was investigated. The results found that CMAQP and CMFDP dissolved slowly and coagulated into large curds during gastric digestion, improving the retention of anthraquinones in the digestive tract. In contrast, CMWLAG structure was destroyed and increased amounts of anthraquinones were released during oral and gastric digestion phases, indicating increased amounts of surface anthraquinones instead of the encapsulation of anthraquinones in the interior of CMs. The strong hydrophobic interactions protected anthraquinones within the core of CM for CMAQP and delayed diffusion. However, during SIF digestion, both CMAQP and CMFDP released significant amounts of anthraquinones, although CMAQP showed a much more controlled release for both aloin and aloe-emodin over SIF digestion time. The release behavior of anthraquinones from CM microcapsules was a function of the type of anthraquinone that was used to encapsulate. The present study provides insight into the release behavior of loaded bioactive compounds using food-grade CMs as the wall material during in vitro digestion and highlights the importance of the type of bioactive component form that will be encapsulated.

Blueberry Supplementation and Skin Health

Environmental stressors such as air pollutants, ozone, and UV radiation are among the most noxious outdoor stressors affecting human skin and leading to premature skin aging. To prevent the extrinsic aging, the skin is equipped with an effective defensive system. However, cutaneous defense mechanisms can be overwhelmed through chronic exposure to environmental pollutants. Recent studies have suggested that the topical usage of natural compounds, such as blueberries, could be a good strategy to prevent skin damage from the environment. Indeed, blueberries contain bioactive compounds found to induce an active skin response against the environmental noxious effects. In this review, results from recent studies on this topic are discussed in order to build the argument for blueberries to possibly be an effective agent for skin health. In addition, we hope to highlight the need for further research to elucidate the mechanisms behind the use of both topical application and dietary supplementation with blueberries to bolster cutaneous systems and defensive mechanisms.

Microstructured lipid microparticles containing anthocyanins: Production, characterization, storage, and resistance to the gastrointestinal tract

Anthocyanins from grape peel extract have several biological properties and can act as a natural colorant and antioxidant agent. However, these compounds are susceptible to degradation by light, oxygen, temperature, and the gastrointestinal tract. Thus, this study produced microstructured lipid microparticles (MLMs) containing anthocyanins by the spray chilling technique and evaluated the particle stability. trans-free fully hydrogenated palm oil (FHPO) and palm oil (PO) were used as encapsulating materials in the ratios 90:10, 80:20, 70:30, 60:40, and 50:50, respectively. The concentration of grape peel extract was 40 % (w/w) in relation to the encapsulating materials. The microparticles were evaluated for thermal behavior by DSC, polymorphism, FTIR, size distribution and particle diameter, bulk density, tapped density, flow properties, morphology, phenolic compounds content, antioxidant capacity, and retention of anthocyanins. Furthermore, the storage stability of the microparticles was investigated at different temperatures (-18, 4, and 25 °C), and the anthocyanins retention capacity, kinetic parameters (half-life time and degradation constant rate), total color difference, and visual aspects were evaluated during 90 days of storage. The resistance of MLMs to the gastrointestinal tract was also evaluated. In general, higher FHPO concentrations increased the thermal resistance of the MLMs and both showed defined peaks of β' and β forms. The FTIR analysis showed that the MLMs preserved the original forms of their constituent materials even after atomization, with interactions between them. The increase in the PO concentration directly affected the increased mean particle diameter, agglomeration, and cohesiveness, as well as lower bulk density, tapped density, and flowability. The retention of anthocyanins in MLMs ranged from 81.5 to 61.3 % and was influenced by the particle size, with a better result observed for the treatment MLM_90:10. The same behavior was observed for the phenolic compounds content (1443.1-1247.2 mg GAE/100 g) and antioxidant capacity (1739.8-1660.6 mg TEAC/100 g). During the storage, MLMs made with FHPO to PO ratios of 80:20, 70:30, and 60:40 showed the highest stability for anthocyanin retention and color changes at the three temperatures (- 18 °C, 4 °C, and 25 °C). The gastrointestinal simulation in vitro revealed that all treatments were resistant to gastric phase and maintained a maximum and controlled release in the intestinal phase, demonstrating that FHPO together with PO are effective to protect anthocyanins during gastric digestion, and can improve the bioavailability of this compound in the human organism. Thus, the spray chilling technique may be a promising alternative for the production of anthocyanins-loaded microstructured lipid microparticles with functional properties for various technological applications.

The Antioxidant Activity and Protection of Probiotic Bacteria in the In Vitro Gastrointestinal Digestion of a Blueberry Juice and Whey Protein Fermentation System

Blueberries have received great attention due to the health effects of their bioactive compounds, such as antioxidant, antitumor, and anti-obesity properties. Probiotics also have these health-promoting benefits. However, these biological activities may be affected by the processs of gastrointestinal digestion, which decreases their functionality. This study aimed to use a more convenient method to improve the blueberries’ antioxidant activity and protective effects on probiotic cells by fermentation with whey protein, and to explore the possible mechanisms underlying these effects. This result showed that the total phenolic content, anthocyanin content, reducing power, DPPH radical scavenging capacity, and probiotic cells’ survival in a blueberry juice and whey protein fermentation system were enhanced in a model of in vitro gastrointestinal digestion. The bioactive compounds in blueberry juice interacted with whey protein, as shown through FTIR. The stability of phenolic compounds was enhanced, and the release of functional compounds in the mixture fermentation system was delayed through CLSM. Interactions between bioactive compounds in blueberries, whey protein, and bacterial surface proteins, glycoproteins or polysaccharides during fermentation were studied by SDS-PAGE. Thus, the stability of bioactive activities in the mixed system after fermentation was strengthened by the interaction. The mixed fermentation system has promising potential for improving antioxidant activity and protecting probiotic cells.

Effects of encapsulation methods on bioaccessibility of anthocyanins: a systematic review and meta-analysis

Anthocyanins have multiple health benefits. However, they are prone to degradation during gastrointestinal digestion, impeding their utilization. Various encapsulation systems have been proposed to improve their bioaccessibility and bioavailability. This review aims to provide a systematic evaluation and meta-analysis of published studies examining the effect of microencapsulation on the bioaccessibility of anthocyanins. A comprehensive and systematic literature search of three databases (Scopus, PubMed, and Web of Science) was conducted. Studies were selected according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses criteria and were reviewed independently by two investigators. Overall, 34 articles were included in the systematic review and 24 were included in the meta-analysis. The fold changes in bioaccessibility between encapsulated and non-encapsulated anthocyanins from eligible studies were calculated. The median and 95% confidence intervals (CI) of the fold changes for spray-drying (median 1.23, 95% CI 0.91-1.92), freeze-drying (median 1.19, 95% CI 0.61-1.28), simple coacervation (median 1.80, 95% CI 1.41-3.20), and complex coacervation (median 1.61, 95% CI 0.21-25.00) were calculated. Simple coacervation showed a promising protection against degradation during in vitro digestion. However, when a large number of anthocyanins cannot be released from the microparticles during digestion, encapsulation impedes the bioaccessibility of anthocyanins.

Protein-binding approaches for improving bioaccessibility and bioavailability of anthocyanins

Color is an important characteristic of food. Over the last 15 years, more attention has been paid to natural colorants because of the rising demand for clean-label food products. Anthocyanins, which are a group of phytochemicals responsible for the purple, blue or red hues of many plants, offer a market advantage. In addition, anthocyanin-rich foods are associated with protection against cardiovascular disease, thrombosis, diabetes, cancer, microbial-based disorders, neurological disorders, and vision ailments. However, the real health value of anthocyanins, whether as a natural colorant or a functional ingredient, is dependent on the ultimate bioaccessibility and bioavailability in the human body. Many animal and human clinical studies revealed that, after intake of anthocyanin-rich foods or anthocyanin extracts, only trace amounts (< 1% of ingested content) of anthocyanins or their predicted metabolites were detected in plasma after a standard blood draw, which was indicative of low bioavailability of anthocyanins. Protein binding to anthocyanins is a strategy that has recently been reported to enhance the ultimate bioactivity, bioaccessibility, and bioavailability of anthocyanins as compared to anthocyanins delivered without a protein carrier. Therefore, in this review, we address anthocyanin properties in food processing and digestion, anthocyanin-protein complexes used in food matrices, and changes in the bioaccessibility and bioavailability of anthocyanins when bound into anthocyanin-protein complexes in foods. Finally, we summarize the challenges and prospects of this delivery system for anthocyanin pigments.

Milk protein-based active edible packaging for food applications: An eco-friendly approach

Whey and casein proteins, in particular, have shown considerable promise in replacing fossil-based plastics in a variety of food applications, such as for O₂ susceptible foods, thereby, rendering milk proteins certainly one of the most quality-assured biopolymers in the packaging discipline. Properties like excellent gas barrier properties, proficiency to develop self-supporting films, adequate availability, and superb biodegradability have aroused great attention toward whey and other milk proteins in recent years. High thermal stability, non-toxicity, the ability to form strong inter cross-links, and micelle formation, all these attributes make it a suitable material for outstanding biodegradability. The unique structural and functional properties of milk proteins make them a suitable candidate for tailoring novel active package techniques for satisfying the needs of the food and nutraceutical industries. Milk proteins, especially whey proteins, serve as excellent carriers of various ingredients which are incorporated in films/coatings to strengthen barrier properties and enhance functional properties viz. antioxidant and antimicrobial. In this review, the latest techniques pertaining to the conceptualization of active package models/ systems using milk proteins have been discussed. Physical and other functional properties of milk protein-based active packaging systems are also reviewed. This review provides an overview of recent applications of milk protein-sourced active edible packages in the food packaging business.

In Vitro Release of Anthocyanins from Microencapsulated Natal Plum (Carissa macrocarpa) Phenolic Extract in Alginate/Psyllium Mucilage Beads

Natal plum (Carissa macrocarpa) contains anthocyanins, cyanidin 3-O-β-sambubioside (Cy-3-Sa), and cyanidin 3-O-glucoside (Cy-3-G) that possess great bioactive properties. During in vitro gastrointestinal digestion, Cy-3-Sa and Cy-3-G are highly sensitive to pH changes and have low bioaccessibility rates of 7.9% and 22%, respectively. This study aimed to therefore use microencapsulation techniques to improve the bioaccessibility of Cy-3-Sa and Cy-3-G. The crude anthocyanin-rich extract was extracted from freeze-dried Natal plum fruit using ultrasonic-assisted ethanol extraction. The anthocyanin-rich extract was encapsulated using the ionic gelation method. Four distinct carrier agents, namely sodium alginate, pectin, xanthan gum and psyllium mucilage were used to form the wall materials. Encapsulation efficiency was highest for alginate/psyllium mucilage beads (93.67%), while alginate showed the least efficiency (86.80%). Scanning Electron Microscopy revealed a cracked and porous structure for the Natal plum extract and a continuous smooth structure for all the beads. Fourier transform infrared spectroscopy showed peaks at 3300 and 1610 cm⁻¹, confirming the presence of polyphenols and polysaccharides in all beads. Thermal stability was higher for the alginate/psyllium mucilage beads and the observed thermal transitions were due to the bonds formed between the polymers and the polyphenols. Alginate beads combined with xanthan gum, pectin, and psyllium mucilage showed a prolonged release of anthocyanins compared to alginate in vitro alone. The highest anthocyanin bioaccessibility was obtained from alginate/psyllium mucilage beads (85.42 ± 1.03%). The results showed the effectiveness of alginate/psyllium mucilage beads in improving stability and in vitro anthocyanin release.

Advancement of Protein- and Polysaccharide-Based Biopolymers for Anthocyanin Encapsulation

Although evidence shows that anthocyanins present promising health benefits, their poor stability still limits their applications in the food industry. Increasing the stability of anthocyanins is necessary to promote their absorption and metabolism and improve their health benefits. Numerous encapsulation approaches have been developed for the targeted release of anthocyanins to retain their bioactivities and ameliorate their unsatisfactory stability. Generally, choosing suitable edible encapsulation materials based on biopolymers is important in achieving the expected goals. This paper presented an ambitious task of summarizing the current understanding and challenges of biopolymer-based anthocyanin encapsulation in detail. The food-grade edible microencapsulation materials, especially for proteins and polysaccharides, should be employed to improve the stability of anthocyanins for effective application in the food industry. The influence factors involved in anthocyanin stability were systematically reviewed and highlighted. Food-grade proteins, especially whey protein, caseinate, gelatin, and soy protein, are attractive in the food industry for encapsulation owing to the improvement of stability and their health benefits. Polysaccharides, such as starch, pectin, chitosan, cellulose, mucilages, and their derivatives, are used as encapsulation materials because of their satisfactory biocompatibility and biodegradability. Moreover, the challenges and perspectives for the application of anthocyanins in food products were presented based on current knowledge. The proposed perspective can provide new insights into the amelioration of anthocyanin bioavailability by edible biopolymer encapsulation.

Nanotechnology as a Tool to Mitigate the Effects of Intestinal Microbiota on Metabolization of Anthocyanins

Anthocyanins are an important group of phenolic compounds responsible for pigmentation in several plants. For humans, a regular intake is associated with a reduced risk of several diseases. However, molecular instability reduces the absorption and bioavailability of these compounds. Anthocyanins are degraded by external factors such as the presence of light, oxygen, temperature, and changes in pH ranges. In addition, the digestion process contributes to chemical degradation, mainly through the action of intestinal microbiota. The intestinal microbiota has a fundamental role in the biotransformation and metabolization of several dietary compounds, thus modifying the chemical structure, including anthocyanins. This biotransformation leads to low absorption of intact anthocyanins, and consequently, low bioavailability of these antioxidant compounds. Several studies have been conducted to seek alternatives to improve stability and protect against intestinal microbiota degradation. This comprehensive review aims to discuss the existing knowledge about the structure of anthocyanins while discussing human absorption, distribution, metabolism, and bioavailability after the oral consumption of anthocyanins. This review will highlight the use of nanotechnology systems to overcome anthocyanin biotransformation by the intestinal microbiota, pointing out the safety and effectiveness of nanostructures to maintain molecular stability.

The in-vitro digestion behaviors of micellar casein acting as wall materials in spray-dried microparticles: The relationships between colloidal calcium phosphate and the release of loaded blueberry anthocyanins

Micellar casein (MC) is a natural carrier for delivering various bioactive substances, and its gastrointestinal digestion behavior has an important impact on the loaded materials. Studies have shown that the digestion behavior of MC is dominated by colloidal calcium phosphate (CCP) in micelle structure. In this paper, The MCs with different CCP levels were used as the carriers to prepare spray-dried microparticles loaded with blueberry anthocyanins (ACNs), then the release of ACNs during digestion was investigated. The results found that the microparticles with less CCP showed the faster dissolution and quicker protein hydrolysis, which caused weaker curd ability. The coagulation was believed as the critical issue to influence the digestion and release behaviors. Therefore, lowering CCP resulted in significantly more ACNs released. This study demonstrated the possibility of using CCP levels to control MC digestion behaviors, which can further determine the release of loaded bioactive substances in casein-based delivery systems.

The interactions between anthocyanin and whey protein: A review

Anthocyanins (ACN) are natural pigments that produce bright red, blue, and purple colors in plants and can be used to color food products. However, ACN sensitivity to different factors limits their applications in the food industry. Whey protein (WP), a functional nutritional additive, has been shown to interact with ACN and improve the color, stability, antioxidant capacity, bioavailability, and other functional properties of the ACN-WP complex. The WP's secondary structure is expected to unfold due to heat treatment, which may increase its binding affinity with ACN. Different ACN structures will also have different binding affinity with WP and their interaction mechanism may also be different. Circular dichroism (CD) spectroscopy and Fourier transform infrared (FTIR) spectroscopy show that the WP secondary structure changes after binding with ACN. Fluorescence spectroscopy shows that the WP maximum fluorescence emission wavelength shifts, and the fluorescence intensity decreases after interaction with ACN. Moreover, thermodynamic analysis suggests that the ACN-WP binding forces are mainly hydrophobic interactions, although there is also evidence of electrostatic interactions and hydrogen bonding between ACN and WP. In this review, we summarize the information available on ACN-WP interactions under different conditions and discuss the impact of different ACN chemical structures and of WP conformation changes on the affinity between ACN and WP. This summary helps improve our understanding of WP protection of ACN against color degradation, thus providing new tools to improve ACN color stability and expanding the applications of ACN and WP in the food and pharmacy industries.

Anthocyanins Recovered from Agri-Food By-Products Using Innovative Processes: Trends, Challenges, and Perspectives for Their Application in Food Systems

Anthocyanins are naturally occurring phytochemicals that have attracted growing interest from consumers and the food industry due to their multiple biological properties and technological applications. Nevertheless, conventional extraction techniques based on thermal technologies can compromise both the recovery and stability of anthocyanins, reducing their global yield and/or limiting their application in food systems. The current review provides an overview of the main innovative processes (e.g., pulsed electric field, microwave, and ultrasound) used to recover anthocyanins from agri-food waste/by-products and the mechanisms involved in anthocyanin extraction and their impacts on the stability of these compounds. Moreover, trends and perspectives of anthocyanins' applications in food systems, such as antioxidants, natural colorants, preservatives, and active and smart packaging components, are addressed. Challenges behind anthocyanin implementation in food systems are displayed and potential solutions to overcome these drawbacks are proposed.