Structuring new alginate network aimed for delivery of dandelion (Taraxacum officinale L.) polyphenols using ionic gelation and new filler materials

Immobilization of the β-galactosidase enzyme by encapsulation in polymeric matrices for application in the dairy industry

Lactose intolerance affects approximately 65% of the global adult population, leading to the demand for lactose-free products. The enzyme β-galactosidase (βG) is commonly used in the industry to produce such products, but its recovery after lactose hydrolysis is challenging. In this scenario, the study aims to encapsulate βG within capsules, varying in dimensions and wall materials, to ensure their suitability for efficient industrial recovery. The enzyme βG was encapsulated through ionic gelation using alginate and its blends with pectin, maltodextrin, starch, or whey protein as wall materials. The capsules produced underwent evaluation for encapsulation efficiency, release profiles, activity of the βG enzyme, and the decline in enzyme activity when reused over multiple cycles. Alginate at 5% wt/vol concentrations, alone or combined with polymers such as maltodextrin, starch, or whey protein, achieved encapsulation efficiencies of approximately 98%, 98%, 80%, and 88%, respectively. The corresponding enzyme recovery rates were 34%, 19%, 31%, and 48%. Capsules made with an alginate-pectin blend exhibited no significant hydrolysis and maintained an encapsulation efficiency of 79%. Encapsulation with alginate alone demonstrated on poor retention of enzyme activity, showing a loss of 74% after just 4 cycles of reuse. Conversely, when alginate was mixed with starch or whey protein concentrate, the loss of enzyme activity was less than 40% after 4 reuses. These results highlight the benefits of combining encapsulation materials to improve enzyme recovery and reuse, offering potential economic advantages for the dairy industry.

Chitosan for improved encapsulation of thyme aqueous extract in alginate-based microparticles

Ionotropic gelation is a low-cost, easy and green microencapsulation technique. However, the encapsulation of highly soluble compounds is challenging because of the wide loss of material into the external water phase by passive diffusion and the consequent low encapsulation efficiency. In this work an important increase of encapsulation efficiency for Thymus vulgaris L. aqueous extract in alginate-based microparticles has been obtained. A formulation with the proper thyme extract/alginate ratio (30:70) was used as reference and then optimized by adding different co-carrier excipients. Microparticles obtained by dropping a solution containing thyme extract and alginate into a chitosan/calcium-chloride/acid acetic solution lead to a high encapsulation efficiency (70.43 ± 5.28 %). After drying, microparticles had a particle size of 1096 ± 72 μm, 20.087 ± 1.487 % of extract content, 6.2 % of residual water, and showed a complete release of thyme extract within one hour. Combining alginate and chitosan as polymeric co-carrier was a valuable option for efficiently encapsulating an aqueous extract by ionotropic gelation.

Insights from Syzygium aromaticum Essential Oil: Encapsulation, Characterization, and Antioxidant Activity

Alginate encapsulates loaded with clove essential oil (CEO) were prepared by ionic gelation, with subsequent freeze-drying. The objective of the present work was to develop a product with the ability to protect CEO against its easy volatility and oxidation. The following techniques were used to characterize the formulations: eugenol release, degree of swelling, GC/MS, TGA/DSC, and SEM. The alginate solution (1.0%) containing different concentrations of CEO (LF1: 1.0%; LF2: 0.5%; LF3: 0.1%) was dropped into a 3.0% CaCl2 solution. After lyophilization, the encapsulated samples were wrinkled and rigid, with high encapsulation power (LF3: 76.9% ± 0.5). Three chemical components were identified: eugenol (the major one), caryophyllene, and humulene. The antioxidant power (LF1: DPPH IC50 18.1 µg mL-1) was consistent with the phenol content (LF1: 172.2 mg GAE g-1). The encapsulated ones were thermally stable, as shown by analysis of FTIR peaks, eugenol molecular structure was kept unaltered. The degree of swelling was 19.2% (PBS). The release of eugenol (92.5%) in the PBS solution was faster than in the acidic medium. It was concluded that the low-cost technology used allows the maintenance of the content and characteristics of CEO in the three concentrations tested, offering a basis for further research with essential oil encapsulates.

Composite alginate-based hydrogel delivery of antioxidant pumpkin protein hydrolysate in simulated gastrointestinal condition

Pumpkin seeds are rich in protein (24-36.5%). Some of them are consumed as nuts, while others are regarded as waste and used for feeding animals. Protein hydrolysates from pumpkin seeds possess some bioactive properties, such as anti-oxidant activity. In this work, various composite alginate hydrogels contain Aloe vera, CMC, and tragacanth have been employed to protect PSPH against degradation in simulated gastrointestinal digestion (SGI) and regulate its release rate. The encapsulation efficiency of PSPH in plain alginate and beads with Aloe vera, CMC, and tragacanth combinations was 71.63, 75.63, 85.07, and 80.4%, respectively. The release rate of the plain alginate beads was %30.23 in the SGF and %52.26 in the SIF, and decreased in the composite-based beads. The highest decreasing rate in the antioxidant activity during SGI was observed in free PSPH, and the decreasing rate slowed down in the alginate-based composites. The swelling rate in plain alginate was %-23.43 and %25.43 in the SGF and SIF, respectively, and increased in the composite-based beads. The FTIR spectra of hydrogels before and after loading with PSPH showed identical absorption patterns and were similar to each other. Based on the data for SEM, it was revealed that substituting other polymers in polymer combinations with alginates resulted in a porosity reduction of the beads and smoother and more uniform surfaces. Based on the results, the combination of polysacchared with alginate could protect and increase the applicability of PSPH as a functional component in the food industry.

Preparation and characterization of pectin-alginate-based microbeads reinforced by nano montmorillonite filler for probiotics encapsulation: Improving viability and colonic colonization

Hydrogel microbeads can be used to enhance the stability of probiotics during gastrointestinal delivery and storage. In this study, the pectin-alginate hydrogel was enhanced by adding montmorillonite filler to produce microbeads for encapsulating Lactobacillus kefiranofaciens (LK). Results showed that the viscosity of biopolymer solutions with 1 % (PAMT1) and 3 % (PAMT3) montmorillonite addition was suitable for producing regular-shaped microbeads. A layered cross-linked network was formed on the surface of PAMT3 microbeads through electrostatic interaction between pectin-alginate and montmorillonite filler, and the surrounding LK with adsorbed montmorillonite was encapsulated inside the microbeads. PAMT3 microbeads reduced the loss of viability of LK when passing through the gastric acid environment, and facilitated the slow release of LK in the intestine and colonic colonization. The maximum decrease in viability among all filler groups was 1.21 log CFU/g after two weeks of storage, while PAMT3 freeze-drying microbeads only decreased by 0.46 log CFU/g, indicating that the gel layer synergized with the adsorbed layer to provide dual protection for probiotics. Therefore, filler-reinforced microbeads are a promising bulk encapsulation carrier with great potential for the protection and delivery of probiotics and can be developed as food additives for dairy products.

Exploring the Nutritional and Bioactive Potential of Olive Leaf Residues: A Focus on Minerals and Polyphenols in the Context of Spain's Olive Oil Production

Lyophilized plant-origin extracts are rich in highly potent antioxidant polyphenols. In order to incorporate them into food products, it is necessary to protect these phytochemicals from atmospheric factors such as heat, light, moisture, or pH, and to enhance their bioavailability due to their low solubility. To address these challenges, recent studies have focused on the development of encapsulation techniques for antioxidant compounds within polymeric structures. In this study, lyophilized olive leaf extracts were microencapsulated with the aim of overcoming the aforementioned challenges. The method used for the preparation of the studied microparticles involves external ionic gelation carried out within a water-oil (W/O) emulsion at room temperature. HPLC analysis demonstrates a high content of polyphenols, with 90% of the bioactive compounds encapsulated. Meanwhile, quantification by inductively coupled plasma optical emission spectroscopy (ICP-OES) reveals that the dried leaves, lyophilized extract, and microencapsulated form contain satisfactory levels of macro- and micro-minerals (calcium, potassium, sodium). The microencapsulation technique could be a novel strategy to harness the polyphenols and minerals of olive leaves, thus enriching food products and leveraging the antioxidant properties of the polyphenolic compounds found in the lyophilized extract.

Comparison of the Adsorption and Desorption Dynamics of Biological Molecules on Alginate Hydrogel Microcapsules-The Case of Sugars, Polyphenols, and Proteins

The aim of this work was to analyze and compare the adsorption and desorption processes of carbohydrates (glucose as a model molecule), polyphenols (gallic acid as a model molecule), and proteins (bovine serum albumin, BSA as a model molecule) on alginate microcapsules. The adsorption and desorption processes were described by mathematical models (pseudo-first-order, pseudo-second-order, and Weber-Morris intraparticle diffusion model for adsorption, and first-order, Korsmeyer-Peppas, and the Higuchi model for desorption) in order to determine the dominant mechanisms responsible for both processes. By comparing the values of adsorption rate (k2) and initial adsorption rate (h0) based on the pseudo-first-order model, the lowest values were recorded for BSA (k1 = 0.124 ± 0.030 min-1), followed by glucose (k1 = 0.203 ± 0.041 min-1), while the model-obtained values for gallic acid were not considered significant at p < 0.05. For glucose and gallic acid, the limiting step of the adsorption process is the chemical sorption of substances, and the rate of adsorption does not depend on the adsorbate concentration, but depends on the capacity of the hydrogel adsorbent. Based on the desorption rates determined by the Korsmeyer-Peppas model (k), the highest values were recorded for gallic acid (k = 3.66236 ± 0.20776 g beads/mg gallic acid per min), followed by glucose (k = 2.55760 ± 0.16960 g beads/mg glucose per min) and BSA (k = 0.78881 ± 0.11872 g beads/mg BSA per min). The desorption process from alginate hydrogel microcapsules is characterized by the pseudo Fickian diffusion mechanism.

Tailoring the oral sensation and digestive behavior of konjac glucomannan-gelatin binary hydrogel based bigel: Effects of composition and ratio

In the food industry, there is a growing demand for bigels that offer both adaptable oral sensations and versatile delivery properties. Herein, we developed bigels using a binary hydrogel of konjac glucomannan (KGM) and gelatin (G) combined with a stearic acid oleogel. We closely examined how the oleogel/hydrogel volume ratio (φ) and the KGM/G mass ratio (γ) influenced various characteristics of the bigels, including their microstructure, texture, rheological properties, thermal-sensitivity, oral tribology, digestive stability, and nutraceutical delivery efficiency. A noteworthy observation was the structural evolution of the bigels with increasing φ values: transitioning from oleogel-in-hydrogel to a bicontinuous structure, and eventually to hydrogel-in-oleogel. Lower γ values yielded a softer, thermally-responsive bigel, whereas higher γ values imparted enhanced viscosity, stickiness, and spreadability to the bigel. Oral tribology assessments demonstrated that φ primarily influenced the friction sensations at lower chewing intensities. In contrast, γ played a significant role in augmenting oral friction perceptions during more intense chewing. Additionally, φ dictated the controlled release and bioaccessibility of curcumin, while γ determined digestive stability. This study provides valuable insights, emphasizing that through meticulous selection and adjustment of the hydrogel matrix composition, bigels can be custom-fabricated to achieve specific oral sensations and regulated digestive behaviors.

Reinforcing alginate matrixes by tea polysaccharide conjugates or their stabilized nanoemulsion for probiotics encapsulation: Characterization, survival after gastrointestinal digestion and ambient storage

Tea polysaccharide conjugates (TPC) were used as fillers in the form of biopolymer or colloidal particles (TPC stabilized nanoemulsion, NE) for reinforcing alginate (ALG) beads to improve the probiotic viability. Results demonstrated that adding TPC or NE to ALG beads significantly enhanced the gastrointestinal viability of encapsulated probiotics when compared to free cells. Moreover, the survivability of free and ALG encapsulated probiotics markedly decreased to 2.03 ± 0.05 and 2.26 ± 0.24 log CFU/g, respectively, after 2 weeks ambient storage, indicating pure ALG encapsulation had no effective storage protective capability. However, adding TPC or NE could greatly enhance the ambient storage viability of probiotics, with ALG + NE beads possessing the best protection (8.93 ± 0.06 log CFU/g) due to their lower water activity and reduced porosity. These results suggest that TPC and NE reinforced ALG beads have the potential to encapsulate, protect and colonic delivery of probiotics.

The Release of Grape Pomace Phenolics from Alginate-Based Microbeads during Simulated Digestion In Vitro: The Influence of Coatings and Drying Method

Grape pomace is a byproduct of wineries and a sustainable source of bioactive phenolic compounds. Encapsulation of phenolics with a well-chosen coating may be a promising means of delivering them to the intestine, where they can then be absorbed and exert their health-promoting properties, including antioxidant, anti-inflammatory, anticancer, cardioprotective, and antimicrobial effects. Ionic gelation of grape pomace extract with natural coatings (sodium alginate and its combination with maltodextrins, gelatin, chitosan, gums Tragacanth and Arabic) was performed, and the resulting hydrogel microbeads were then air-, vacuum-, and freeze-dried to prevent spoilage. Freeze-drying showed advantages in preserving the geometrical parameters and morphology of the microbeads compared to other drying techniques. A good relationship was found between the physicochemical properties of the dried microbeads and the in vitro release of phenolics. Freeze-dried microbeads showed the highest cumulative release of phenols in the intestinal phase (23.65-43.27 mgGAE/gMB), while the most suitable release dynamics in vitro were observed for alginate-based microbeads in combination with gelatin, gum Arabic, and 1.5% (w/v) chitosan. The results highlight the importance of developing encapsulated formulations containing a natural source of bioactive compounds that can be used in various functional foods and pharmaceutical products.

Pectin Hydrogels: Gel-Forming Behaviors, Mechanisms, and Food Applications

Pectin hydrogels have garnered significant attention in the food industry due to their remarkable versatility and promising properties. As a naturally occurring polysaccharide, pectin forms three-dimensional (3D) hydrophilic polymer networks, endowing these hydrogels with softness, flexibility, and biocompatibility. Their exceptional attributes surpass those of other biopolymer gels, exhibiting rapid gelation, higher melting points, and efficient carrier capabilities for flavoring and fat barriers. This review provides an overview of the current state of pectin gelling mechanisms and the classification of hydrogels, as well as their crosslinking types, as investigated through diverse research endeavors worldwide. The preparation of pectin hydrogels is categorized into specific gel types, including hydrogels, cryogels, aerogels, xerogels, and oleogels. Each preparation process is thoroughly discussed, shedding light on how it impacts the properties of pectin gels. Furthermore, the review delves into the various crosslinking methods used to form hydrogels, with a focus on physical, chemical, and interpenetrating polymer network (IPN) approaches. Understanding these crosslinking mechanisms is crucial to harnessing the full potential of pectin hydrogels for food-related applications. The review aims to provide valuable insights into the diverse applications of pectin hydrogels in the food industry, motivating further exploration to cater to consumer demands and advance food technology. By exploiting the unique properties of pectin hydrogels, food formulations can be enhanced with encapsulated bioactive substances, improved stability, and controlled release. Additionally, the exploration of different crosslinking methods expands the horizons of potential applications.

Microencapsulation of Laurus nobilis L. Leaf Extract in Alginate-Based System via Electrostatic Extrusion

Bay leaves (L. nobilis L.) are a rich source of polyphenols that hold great potential for application in functional food products in which where the main challenges are the polyphenols' low stability and bioaccessibility, which can be overcome through different microencapsulation techniques, such as electrostatic extrusion, which hasn't been applied for the encapsulation of bay leaf polyphenols (BLP) to date. Therefore, the main goal of this research was to evaluate the potential of this technique through monitoring the polyphenolic content, antioxidant activity, release kinetics, and bioaccessibility of the encapsulated BLP. The results showed that electrostatic extrusion was suitable for the encapsulation of BLP, where 1% alginate and 1.5% CaCl2 with 0.5% chitosan resulted in the highest encapsulation efficiency (92.76%) and antioxidant activity in vitro. The use of 1.5% or 2% alginate with 5% CaCl2 + 0.5% chitosan showed the most controlled release of polyphenols, while encapsulation generally increased the bioaccessibility of BLP. The results showed that electrostatic extrusion can be considered an efficient technique for the microencapsulation of BLP.

Alginate microbeads incorporated with anthocyanins from purple corn (Zea mays L.) using electrostatic extrusion: Microencapsulation optimization, characterization, and stability studies

Microencapsulation of purple corn anthocyanins was carried out via an electrostatic extruder using alginate as a wall material. The influence of alginate concentration (1-2 %), extract concentration (20-30 %), and extrusion voltage (3-5 kV) on encapsulation efficiency and mean particle size was evaluated using response surface methodology. Optimal conditions were obtained to produce two different extract-loaded microbeads. Microbeads with the highest encapsulation efficiency (EE) and minimum particle size were achieved at 1 % alginate, 20 % extract, and 5 kV extrusion voltage (EEC3G = 70.26 %, EETPC = 91.59 %, particle size = 1.29 mm). In comparison, the microbeads with the efficient entrapment and maximum particle size were obtained at 1 % alginate, 26 % extract, and 3 kV (EEC3G = 81.15 %, EETPC = 91.01 %, particle size = 1.87 mm). Brunauer-Emmett-Teller (BET) surface area, pore size, and pore volume decreased after the inclusion of extract, with the lowest values reported for the smallest microbeads containing the extract. Scanning electron microscopy confirmed the results obtained by BET method and demonstrated fewer cracks and lower shrinkage of encapsulated samples. Fourier-transform infrared results proved the presence of anthocyanins and further possible interactions between phenolics and alginate. Stability studies revealed the color maintenance of anthocyanins-loaded microbeads during 4 weeks of storage at 4 °C and 8 °C. Moreover, the small and large particles showed a 7.6 and 3.4-fold reduction in degradation rate at 4 °C compared to their unencapsulated counterparts. Anthocyanins-loaded alginate microbeads retained over 80 % of cyanidin-3-glucoside at 4 °C and 8 °C, suggesting a promising potential of optimized microbeads for intelligent packaging applications.

Binary Alginate-Whey Protein Hydrogels for Antioxidant Encapsulation

Encapsulation of antioxidants in hydrogels, i.e., three-dimensional networks that retain a significant fraction of water, is a strategy to increase their stability and bioaccessibility. In fact, low oxygen diffusivity in the viscous gelled phase decreases the rate of oxidation. Moreover, some hydrocolloids such as alginate and whey proteins provide a pH-dependent dissolution mechanism, allowing the retention of encapsulated compounds in the gastric environment and their release in the intestine, where they can be absorbed. This paper reviews the information on alginate-whey protein interactions and on the strategies to use binary mixtures of these polymers for antioxidant encapsulation. Results showed that alginate and whey proteins strongly interact, forming hydrogels that can be modulated by alginate molecular mass, mannuronic acid: guluronic acid ratio, pH, Ca2+ or transglutaminase addition. Hydrogels of alginate and whey proteins, in the forms of beads, microparticles, microcapsules, and nanocapsules, generally provide better encapsulation efficiency and release properties for antioxidants with respect to the hydrogel of alginate alone. The main challenges for future studies are to extend knowledge on the interactions among three components, namely alginate, whey proteins, and the encapsulated bioactive compounds, and to investigate the stability of these structures under food processing conditions. This knowledge will represent the rationale basis for the development of structures that can be tailored to specific food applications.

Starches in the encapsulation of plant active ingredients: state of the art and research trends

As a natural polymer, starches and their derivatives have received widespread attention in the cosmetic and pharmaceutical industries, particularly for their use as a coating material. In this sense, as an encapsulating agent, starches stand out, considering the number of compounds that they can trap. Additionally, they provide a nutritional contribution and may improve acceptance by patients. As such, this type of material may serve as an alternative to overcome gaps such as loss of activity of the active principles, low assimilation, or deterioration under environmental and physiological conditions. In this paper, we aim to present the state of the art and research trends on the use of starch as a wall material for the encapsulation of active principles of plant origin. It was found that the most-encapsulated active principles are essential oils and polyphenols; native or modified starches are typically used, either as the sole wall material or in combination with other polymers; and the most widely used methodology is spray drying. The reviewed studies indicate the potential of starches for their use in active ingredient encapsulation processes, improving their viability and expanding their range of applications in different industries, as well as showing a clearly increasing publication trend over the last 10 years.

Graphical abstract

Polyphenol Release and Antioxidant Activity of the Encapsulated Antioxidant Crude Extract from Cold Brew Spent Coffee Grounds under Simulated Food Processes and an In Vitro Static Gastrointestinal Model

An ionic gelation technique based on an alginate-calcium-based encapsulation process was prepared as the delivery matrix for antioxidant crude extracts from cold brew spent coffee grounds (350 mg/mL). All the encapsulated samples were treated with different simulated food processes, namely pH 3, pH 7, low-temperature long-time (LTLT) pasteurization, and high-temperature short-time (HTST) pasteurization, to evaluate the stability of the encapsulated matrices. The results showed that alginate (2%, w/v)/maltodextrin (2%, w/v) (CM), and alginate (2%, w/v)/inulin (5%, w/v) (CI) could enhance encapsulation efficiency (89.76 and 85.78%, respectively) and provide lower swelling behavior after being treated using the simulated food processes. Both CM and CI could control the release of antioxidants during the gastric phase (2.28-3.98 and 2.52-4.00%, respectively) and gradual release in the intestinal phase (6.80-11.78 and 4.16-12.72%, respectively) compared to pure alginate (CA). In addition, pasteurization treatment at pH 7.0 produced the highest accumulated release of total phenolic content (TPC) and antioxidant activity (DPPH) after digestion in the in vitro gastrointestinal system compared to the other simulated food processes. The thermal process resulted in a greater release of compounds from the encapsulated matrix during the gastric phase. On the other hand, the treatment with pH 3.0 resulted in the lowest accumulated release of TPC and DPPH (5.08 and 5.12%, respectively), which indicated phytochemical protection.

Physicochemical, Structural, and In Vitro Gastrointestinal Tract Release Properties of Sodium Alginate-Based Cryogel Beads Filled with Hydroxypropyl Distarch Phosphate as a Curcumin Delivery System

The objectives of this study were to produce sodium alginate (SA)-based cryogel beads filled with different concentrations (0, 0.4, 1.0, and 2.5%, w/w) of hydroxypropyl distarch phosphate (HDP) as a curcumin delivery system and to investigate the physicochemical, structural, and in vitro gastrointestinal tract release properties of the cryogel beads. According to FT-IR analysis, the formation of ionic crosslinking between SA and Ca²⁺ and the presence of HDP were found. XRD analysis demonstrated the successful encapsulation of curcumin in the beads by observing the disappearance of the characteristic peaks of curcumin. SEM analysis results revelated that SA-based cryogel beads exhibited a denser internal structure as the HDP concentration was increased. The encapsulation efficiency of curcumin in SA cryogel beads filled with HDP concentration from 0% to 2.5% was increased from 31.95% to 76.66%, respectively, indicating that HDP can be a suitable filler for the encapsulation of curcumin in the production of SA-based cryogel beads. After exposure to simulated gastric fluid (SGF) and simulated intestinal fluid (SIF), the release rate of curcumin was decreased as HDP concentration was increased. Accordingly, SA-based cryogel beads filled with HDP can be utilized for the delivery system of curcumin in the food industry.

Fabrication and Characterization of Alginate Hydrogels for Control Release System of Catechin-Derived Tea Leave Extract

Polyphenolic chemicals found in tea leaves are frequently used in pharmaceutics and the food industry. Catechin is a polyphenol that has antimicrobial, antioxidant, and antibacterial effects, as well as other health advantages. The goal of this study was to create a catechin-encapsulated alginate hydrogel (Cate-ALG) that would protect catechin from degradation and bioactivity loss in stressful environments while also delivering catechin. The antioxidant ability of catechin was found to be greater than that of vitamin C using the 2,2-diphenyl-1-pierylhyrazyl assay. The FT-IR spectra revealed the distinct peaks of catechin and alginate. Additionally, due to the hydrogen bond interaction between alginate and catechin molecules, frequency downshifting was observed in the carbonyl and hydroxyl regions. Furthermore, release profile revealed a burst release of 5% catechin-ALG in the first 25 min. On the other hand, the 3% Cate-ALG approached the controlled release profile of catechin and increased the release time by more than 40 minutes. The catechin in alginate hydrogel has the potential for controlled release via transdermal and wound dressing applications.

Fabrication and characterization of phycocyanin-alginate-pregelatinized corn starch composite gel beads: Effects of carriers on kinetic stability of phycocyanin

Composite gel beads using calcium alginate and different concentrations of pregelatinized corn starch (PCS) were produced to encapsulate phycocyanin (PC). Rheological properties of different sodium alginate/PCS/PC mixtures, structural and morphological properties of beads, and kinetic stability of encapsulated PC (upon heating at various time-temperature combinations) were then assessed. Rheological properties of the mixtures exhibited shear thinning behaviors. Aquagram revealed that the PC-containing beads had more water structure with weak‑hydrogen bonds. Morphological images represented less subsidence in the structures of composite gel beads, unlike PCS-free beads. Kinetic study showed that degradation rate constant values of PC encapsulated in composite gel beads (1.08-3.45 × 10^-4, 3.38-4.43 × 10^-4, and 5.57-15.32 × 10^-4 s^-1) were lower than those in PCS-free alginate gel beads (4.45 × 10^-4, 9.20 × 10^-4, and 18.04 × 10^-4 s^-1) at 40, 50, and 60 °C, respectively. This study suggests that the composite gel beads can improve PC stability.

Development, Characterization and Incorporation of Alginate-Plant Protein Covered Liposomes Containing Ground Ivy (Glechoma hederacea L.) Extract into Candies

Ground ivy (Glechoma hederacea L.) has been known as a medicinal plant in folk medicine for generations and, as a member of the Lamiaceae family, is characterized with a high content of rosmarinic acid. The aim of the present study was to formulate delivery systems containing bioactive compounds from ground ivy in encapsulated form and incorporated into candies. Liposomes were examined as the encapsulation systems that were additionally coated with an alginate–plant protein gel to reduce leakage of the incorporated material. Bioactive characterization of the ground ivy extract showed a high content of total phenolics (1186.20 mg GAE/L) and rosmarinic acid (46.04 mg/L). The formulation of liposomes with the high encapsulation efficiency of rosmarinic acid (97.64%), with at least a double bilayer and with polydisperse particle size distribution was achieved. Alginate microparticles reinforced with rice proteins provided the highest encapsulation efficiency for rosmarinic acid (78.16%) and were therefore used for the successful coating of liposomes, as confirmed by FT-IR analysis. Coating liposomes with alginate–rice protein gel provided prolonged controlled release of rosmarinic acid during simulated gastro-intestinal digestion, and the same was noted when they were incorporated into candies.

Recent development in fabrication and evaluation of phenolic-dietary fiber composites for potential treatment of colonic diseases

Phenolics have been shown by in vitro and animal studies to have multiple pharmacological effects against various colonic diseases. However, their efficacy against colonic diseases, such as inflammatory bowel diseases, Crohn's disease, and colorectal cancer, is significantly compromised due to their chemical instability and susceptibility to modification along the gastrointestinal tract (GIT) before reaching the colonic site. Dietary fibers are promising candidates that can form phenolic-dietary fiber composites (PDC) to carry phenolics to the colon, as they are natural polysaccharides that are non-digestible in the upper intestinal tract but can be partially or fully degradable by gut microbiota in the colon, triggering the release at this targeted site. In addition, soluble and fermentable dietary fibers confer additional health benefits as prebiotics when used in the PDC fabrication, and the possibility of synergistic relationship between phenolics and fibers in alleviating the disease conditions. The functionalities of PDC need to be characterized in terms of their particle characteristics, molecular interactions, release profiles in simulated digestion and colonic fermentation to fully understand the metabolic fate and health benefits. This review examines recent advancements regarding the approaches for fabrication, characterization, and evaluation of PDC in in vitro conditions.

Microparticles coated with proteins in their natural state and in vitro gastrointestinal simulation

Abstract This study aimed to produce pectin and alginate microparticles by ionic gelation coated with different concentrations of bovine blood and egg white protein in their natural state. The coated microparticles were characterized, and their physical resistance and morphology were evaluated, as well as the released protein during in vitro gastrointestinal simulation. The highest protein adsorption (65.47%) was shown by pectin microparticles coated with bovine blood (10%), regardless of the protein type and concentration used. Likewise, higher amounts of adsorbed protein resulted as protein concentration increased, regardless of the type of microparticle. Nevertheless, the physical resistance of coated microparticles was affected more by the type of polysaccharide, being alginate microparticles more resistant. Adsorbed proteins on microparticles surface showed higher solubility values in vitro gastrointestinal simulation regardless of protein type. Bovine blood and egg white proteins in their natural state can be used as alternative coating materials for microparticles.

Physicochemical and release behaviour of phytochemical compounds based on black jamun pulp extracts-filled alginate hydrogel beads through vibration dripping extrusion

The phytochemical-rich extract obtained from black jamun pulp were encapsulated using vibrating dripping extrusion technique. The utilisation of alginate (AL) with four variations of core-shell material comprising gum Arabic (AL-GA), guar gum (AL-GG), pectin (AL-P) and xanthan gum (AL-X) was engaged to form calcium-alginate based lyophilised jamun extract encapsulated beads. It resulted that among four variations, lyophilised alginate with AL-GG based encapsulated jamun extract filled beads have better physicochemical characteristics and 95% encapsulation efficiency. The results revealed the morphological comparison of each variation. The release behaviour of AL-GG based beads has a higher release of total phenolics (TPC) and total anthocyanin content (TAC). The release kinetics model involving Ritger-Peppas and Higuchi model were applied for release TPC and TAC of all variations of beads. The Ritger-Peppas model was found best suitable in terms of average R² (0.965) and lowest χ² (0.0039). The release kinetics study showed that AL-GA based beads followed by AL-GG could also be the best suitable in release behaviour using simulated gastrointestinal fluids at 140-160 min. Overall, results shown the encapsulated Jamun beads have the best agro-industrial efficacy in form of phytochemical compounds based microparticles, holding decent antioxidant potential.

Evaluation of the Adsorption and Desorption Dynamics of Beet Juice Red Dye on Alginate Microbeads

The use of alginate microcapsules has often been mentioned as one of the ways to remove dyes from waste solvents, water and materials from the food industry. In addition, alginate can be used as a wall material for the microencapsulation of food dyes and their further application in the food industry. The aims of this study were to: (i) determine the effect of the alginate concentration (1, 2, 3 and 4%) on the ability of the adsorption and desorption of natural beetroot red dye and (ii) evaluate the kinetic parameters of the adsorption and desorption process, as well as the factors affecting and limiting those processes. According to the obtained results, the viscosity of alginate solutions increased with an increase in the alginate concentration. Based on k₂ values (the pseudo-second order kinetic rate constant), when a more concentrated solution of alginate was used in the adsorption process, the beads adsorbed a smaller amount of dye. Furthermore, based on the values for n derived from the Korsmeyer-Peppas model, the dye release rates (k) were higher for beads made with lower alginate concentrations, and this release was governed by a pseudo-Fickian diffusion mechanism (n values ranged from 0.2709 to 0.3053).

Sodium alginate/soybean protein-epigallocatechin-3-gallate conjugate hydrogel beads: evaluation of structural, physical, and functional properties

Sodium alginate (SA) hydrogel beads have been extensively studied as delivery systems for bioactive compounds. Key challenges include overcoming the highly porous and poor emulsifying properties of SA hydrogels. Herein, soy protein isolate (SPI) was modified by covalent and noncovalent conjugation with epigallocatechin-3-gallate (EGCG), followed by complexation with SA to change the SA structure and fabricate hydrogel beads with low porosities. Microencapsulation beads were fabricated from SA-, SA/SPI-, and SA/SPI-modified EGCG complexes with a corn oil/quercetin mixture core. After the covalent and noncovalent SPI-modified EGCG complexes were combined with SA, the OH stretching vibration shifted, indicating that hydrogen bonds formed between the protein and SA, and the crystal structure of SA was destroyed. To achieve crosslinking, the beads were injected into a CaCl₂ solution, whereby Ca²⁺ ions replaced the Na⁺ ions in SA. Meanwhile, the addition of covalent and noncovalent SPI-modified EGCG complexes promoted the binding capacity of Ca²⁺ and SA. All hydrogel beads possessed open-cell microstructures with interconnecting pores. The SA/SPI-modified EGCG hydrogel beads exhibited smoother surfaces, thicker shells, and lower porosity than the SA hydrogel beads. Moreover, they exhibited significantly higher antioxidant activities. During digestion, all types of hydrogel bead maintained their structure, and only a small part of the encapsulated oil and quercetin was digested in the upper part of the gastrointestinal tract. In short, the formation mechanism of hydrogel beads was clarified, and hydrogel beads with low porosity and high antioxidation activities were successfully fabricated.

Microencapsulation of Chokeberry Polyphenols and Volatiles: Application of Alginate and Pectin as Wall Materials

Microencapsulation is a rapidly evolving technology that allows preservation of various high-value, but unstable, compounds, such as polyphenols and volatiles. These components of chokeberry juice are reported to have various health-promoting properties. In the present study, hydrogel beads with alginate or alginate and pectin as wall materials and chokeberry juice as active agent were prepared using Encapsulator B-390. The effects of different compositions of wall material as well as the duration of complexation (30 or 90 min) with hardening solution on microencapsulation of chokeberry polyphenols and volatiles were investigated. Spectrophotometric and HPLC analyses showed that beads with pectin addition contained higher concentrations of polyphenols and anthocyanins compared to those prepared with alginate. Antioxidant activities evaluated with FRAP, CUPRAC, DPPH, and ABTS assays followed the same trend. Encapsulation of volatiles which were determined using GC-MS analysis also depended on the composition of hydrogel beads and in some cases on the time of complexation. Results of this study showed that the selection of the wall material is a relevant factor determining the preservation of polyphenols and volatiles. The incorporation of bioactive compounds in hydrogel beads opens up a wide range of possibilities for the development of functional and innovative foods.

Alginate-based microparticles structured with different biopolymers and enriched with a phenolic-rich olive leaves extract: A physico-chemical characterization

Encapsulation of olive leaves extracts (OLE), rich of healthy components like Oleuropein, Hydroxytyrosol and Verbascoside, represents a new challenge to improve stability and nutritional value of food as well as a way to recover value added compounds from by-products, contributing to a more sustainable food system. In this context, OLE-loaded microbeads of Na alginate alone or in combination with Pectin, Na Caseinate or Whey protein isolates, were produced by emulsification internal ionotropic gelation. Encapsulation efficiency of the main phenolic compounds (Oleuropein, Hydroxytyrosol, Verbascoside) was carried out along with microparticles morphological characterization by scanning electron microscopy (SEM), thermal properties by differential scanning calorimetry (DSC) and color. Encapsulation efficiency resulted higher for Alginate/Pectin, whilst Alginate/Caseinate was the less performing system, probably due to the lower interaction with polyphenols. SEM revealed collapsed structures and continuous smooth surfaces for Alginate and Alginate/Pectin microbeads while more regular structures and porous surfaces were observed for Alginate/Caseinate and Alginate/Whey proteins. Higher hue angle and lower chroma values were observed for all the beads with respect to the pure extract, indicating a reduction of the yellow/brown color. DSC highlighted higher thermal stability for the microbeads in comparison to the original ingredients, showing also new thermal transitions related to bonds formation between polymers and OLE.

•

Verbascoside showed higher encapsulation efficiency compared to Oleuropein.

•

Alginate/Pectin was the most efficient system for encapsulation purposes.

•

Microstructural traits were linked to the encapsulation efficiency.

•

Thermal analysis revealed increased thermal stability of encapsulated polyphenols.

•

Encapsulation allowed a mitigation of the color properties of the olive leaf extract.

Novel pH-sensitive alginate hydrogel delivery system reinforced with gum tragacanth for intestinal targeting of nutraceuticals

The present study utilizes the novel combination of Gum tragacanth (GT) and sodium alginate (SA) to reinforce SA hydrogel beads. The composite hydrogel beads were encapsulated with phenolic compounds extracted from Basella sps. The rheological studies conferred increased elastic property of GT incorporated formulations. Higher swelling behavior was observed in simulated intestinal fluid (SIF) with increasing GT content in SA formulations. SA-GT composite hydrogels revealed increased encapsulation efficiency with sustained release of phenolic compounds in SIF. GT incorporated hydrogel beads exhibited increased biodegradation (up to 82% weight loss) in biodegradation media (in vitro). FTIR study found no molecular interaction between SA and GT. TGA analysis revealed that GT incorporation did not affect the thermal behavior of SA. Furthermore, SA-GT encapsulated hydrogels showed remarkable cytotoxicity against osteosarcoma cells. Thus our findings suggest SA-GT gel formulation could be used as a promising delivery system for drugs and nutraceutical compounds.

Design of gel structures in water and oil phases for improved delivery of bioactive food ingredients

Gels are viscoelastic systems built up with a liquid phase entrapped in a three-dimensional network, which can behave as carriers for bioactive food ingredients. Many attempts have been made to design gel structures in the water phase (hydrogels, emulsion gels, bigels) or oil phase (organogels, bigels) in order to improve their delivery performances. Hydrogels are originated from proteins or polysaccharides, which are suitable for the delivery of hydrophilic ingredients. Organogels are mainly built up with the self-assembling of gelator molecules in the oil phase, and they offer good carriers for lipophilic ingredients. Emulsion gels and bigels, containing both aqueous and oil domains, can provide accommodations for lipophilic and hydrophilic ingredients simultaneously. Gel structures (e.g. rheology, texture, water holding capacity, swelling ratio) can be modulated by choosing different gelators, modifying gelation techniques, and the involvement of other ingredients (e.g. oils, emulsifiers, minerals, acids), which then alter the diffusion and release of the bioactive ingredients incorporated. Various studies have proved that gel-based delivery systems are able to improve the stability and bioavailability of many bioactive food ingredients. This review provides a state-to-art overview of different gel-based delivery systems, highlighting the significance of structure-functionality relationship, to provide advanced knowledge for the design of novel functional foods.