Sandblasting improves the performance of electrodes of miniature electrical impedance tomography via double layer capacitance

Applications of Electrical Impedance Tomography in Neurology

Introduction

Electrical impedance tomography (EIT) is a non-invasive technique utilized in various medical applications, including brain imaging and other neurological diseases. Recognizing the physiological and anatomical characteristics of organs based on their electrical properties is one of the main applications of EIT, as each variety of tissue structure has its own electrical characteristics. The high potential of brain EIT is established in real-time supervision and early recognition of cerebral brain infarction, hemorrhage, and other diseases. In this paper, we review the studies on the neurological applications of EIT.

Methods

EIT calculates the internal electrical conductivity distribution of an organ by measuring its surface impedance. A series of electrodes are placed on the surface of the target tissue, and small alternating currents are injected. The related voltages are then observed and analyzed. The electrical permittivity and conductivity distributions inside the tissue are reconstructed by measuring the electrode voltages.

Results

The electrical characteristic of biological tissues is remarkably dependent on their structures. Some tissues are better electrical conductors than the others since they have more ions that can carry the electrical charges. This difference is attributed to changes in cellular water content, membrane properties, and destruction of tight junctions within cell membranes.

Conclusion

EIT is an extremely practical device for brain imaging, capturing fast electrical activities in the brain, imaging epileptic seizures, detecting intracranial bleeding, detecting cerebral edema, and diagnosing stroke.

The Accuracy of Electrical Impedance Tomography for Breast Cancer Detection: A Systematic Review and Meta-Analysis

Introduction

Incidence of breast cancer (BC) in 2020 is about 2.26 million new cases. It is the first common cancer accounting for 11.7% of all cancer worldwide. Disease complications and the mortality rate of breast cancer are highly dependent on the early diagnosis. Therefore, novel human breast-imaging techniques play an important role in minimizing the breast cancer morbidity and mortality rate. Electrical impedance tomography (EIT) is a noninvasive technique to image the breast using the electrical impedance behavior of the body tissues.

Objectives

The aims of this manuscript are as follows: (1) a comprehensive investigation of the accuracy of EIT for breast cancer diagnosis through searching pieces of evidence in the valid databases and (2) meta-analyses of the results.

Methods

The systematic search was performed in the electronic databases including PubMed, Web of Science, EMBASE, Science Direct, ProQuest, Scopus, and Google Scholar without time and language limitation until January 2021. Search terms were “EIT” and “Breast Cancer” with their synonyms. Relevant studies were included based on PRISMA and study objectives. Quality of studies and risk of bias were performed by QUADAS-2 tools. Then, relevant data were extracted in Excel form. The hierarchical/bivariate meta-analysis was performed with “metandi” package for the ROC plot of sensitivity and specificity. Forest plot of the Accuracy index and double arcsine transformations was applied to stabilize the variance. The heterogeneity of the studies was evaluated by the forest plots, χ2 test (assuming a significance at the a-level of 10%), and the I² statistic for the Accuracy index.

Results

A total of 4027 articles were found. Finally, 12 of which met our criteria. Overall, these articles included studies of 5487 breast cancer patients. EIT had an overall pooled sensitivity and specificity of 75.88% (95% CI, 61.92% to 85.89%) and 82.04% (95% CI, 69.72% to 90.06%), respectively. The pooled diagnostic odds ratio was 14.37 (95% CI, 6.22% to 33.20%), and the pooled effect of accuracy was 0.79 with 95% CI (0.73, 0.83).

Conclusions

This study showed that EIT can be used as a useful method alongside mammography. EIT sensitivity could not be compared with the sensitivity of MRI, but in terms of specificity, it can be considered as a new method that probably can get more attention. Furthermore, large-scale studies will be needed to support the evidence.

Sensitivity and Accuracy of Dielectric Measurements of Liquids Significantly Improved by Coupled Capacitive-Dependent Quartz Crystals

A method to measure complex permittivity of liquids by using a capacitive-dependent quartz crystal and two quartz oscillators for temperature compensation in the frequency range of 4-10 MHz is described. Complex permittivity can be detected with high precision and sensitivity through a small change of capacitance and conductance, because a change in reactance in series with the quartz crystal impacts its resonant oscillation frequency. The temperature compensation in the range below 0.1 ppm is achieved by using two quartz oscillators that are made of elements of the same quality and have a temperature-frequency pair of quartz crystals. With the help of a reference oscillator, measurements of frequency are more accurate, because the frequency difference is in the kHz region, which also enables further processing of the signal by a microcontroller. With a proper calibration, the accuracy of this highly sensitive quartz crystal method is ±0.05%, which is an order of magnitude lower than that for a capacitance method without quartz crystals. The improved accuracy is of significant importance in the field of power engineering to monitor coolants and lubricants, oils, liquid fuels and other liquids, the dielectric properties of which are crucial for proper operation of devices.

Development of a Portable, Reliable and Low-Cost Electrical Impedance Tomography System Using an Embedded System

Electrical impedance tomography (EIT) is a useful procedure with applications in industry and medicine, particularly in the lungs and brain area. In this paper, the development of a portable, reliable and low-cost EIT system for image reconstruction by using an embedded system (ES) is introduced herein. The novelty of this article is the hardware development of a complete low-cost EIT system, as well as three simple and efficient algorithms that can be implemented on ES. The proposed EIT system applies the adjacent voltage method, starting with an impedance acquisition stage that sends data to a Raspberry Pi 4 (RPi4) as ES. To perform the image reconstruction, a user interface was developed by using GNU Octave for RPi4 and the EIDORS library. A statistical analysis is performed to determine the best average value from the samples measured by using an analog-to-digital converter (ADC) with a capacity of 30 kSPS and 24-bit resolution. The tests for the proposed EIT system were performed using materials such as metal, glass and an orange to simulate its application in food industry. Experimental results show that the statistical median is more accurate with respect to the real voltage measurement; however, it represents a higher computational cost. Therefore, the mean is calculated and improved by discarding data values in a transitory state, achieving better accuracy than the median to determine the real voltage value, enhancing the quality of the reconstructed images. A performance comparison between a personal computer (PC) and RPi4 is presented. The proposed EIT system offers an excellent cost-benefit ratio with respect to a traditional PC, taking into account precision, accuracy, energy consumption, price, light weight, size, portability and reliability. The proposed EIT system has potential application in mechanical ventilation, food industry and structural health monitoring.