Ultra low-pressure filtration system for energy efficient microalgae filtration

Perspectives on cultivation and harvesting technologies of microalgae, towards environmental sustainability and life cycle analysis

The development of algae is seen as a potential and ecologically sound approach to address the increasing demands in multiple sectors. However, successful implementation of processes is highly dependent on effective growing and harvesting methods. The present study provides a complete examination of contemporary techniques employed in the production and harvesting of algae, with a particular emphasis on their sustainability. The review begins by examining several culture strategies, encompassing open ponds, closed photobioreactors, and raceway ponds. The analysis of each method is conducted in a systematic manner, with a particular focus on highlighting their advantages, limitations, and potential for expansion. This approach ensures that the conversation is in line with the objectives of sustainability. Moreover, this study explores essential elements of algae harvesting, including the processes of cell separation, dewatering, and biomass extraction. Traditional methods such as centrifugation, filtration, and sedimentation are examined in conjunction with novel, environmentally concerned strategies including flocculation, electro-coagulation, and membrane filtration. It evaluates the impacts on the environment that are caused by the cultivation process, including the usage of water and land, the use of energy, the production of carbon dioxide, and the runoff of nutrients. Furthermore, this study presents a thorough examination of the current body of research pertaining to Life Cycle Analysis (LCA) studies, presenting a perspective that emphasizes sustainability in the context of algae harvesting systems. In conclusion, the analysis ends up with an examination ahead at potential areas for future study in the cultivation and harvesting of algae. This review is an essential guide for scientists, policymakers, and industry experts associated with the advancement and implementation of algae-based technologies.

Compaction of a Polymeric Membrane in Ultra-Low-Pressure Water Filtration

Applications of ultra-low-pressure filtration systems are increasing as they offer enhanced sustainability due to lower energy input, almost no use of chemicals, and minimum operational expenditure. In many cases, they operate as a decentralized system using a gravity-driven membrane (GDM) filtration process. These applications are relatively new; hence, the fundamental knowledge of the process is still limited. In this study, we investigated the phenomenon of polymeric membrane compaction under an ultra-low-pressure system. The compaction phenomenon is well-recognized in the traditional pressure-driven system operating at high transmembrane pressures (ΔPs > 200 kPa), but it is less documented in ultra-low-pressure systems (ΔP < 10 kPa). A simple GDM filtration setup operated under a constant-pressure system was employed to investigate the compaction phenomena in a polymeric hollow fiber membrane for clean water filtration. Firstly, a short-term pressure stepping test was performed to investigate the occurrence of instantaneous compaction in the ΔP range of 1−10 kPa. The slow compaction was later investigated. Finally, the compaction dynamic was assessed under alternating high and low ΔP and relaxation in between the filtrations. The findings demonstrated the prominence of membrane compaction, as shown by the decreasing trend in clean water permeability at higher ΔPs (i.e., 3240 and 2401 L m−2 h−1 bar−1 at ΔPs of 1 and 10 kPa, respectively). We also found that the intrinsic permeability of the applied polymeric membrane was significantly higher than the apparent one (4351 vs. 2401 L m−2 h−1 bar−1), demonstrating >50% loss due to compaction. The compaction was mainly instantaneous, which occurred when the ΔP was changed, whereas only minor changes in permeability occurred over time when operating at a constant ΔP. The compaction was highly reversible and could be restored (i.e., decompaction) through relaxation by temporarily stopping the filtration. A small fraction of irreversible compaction could be detected by operating alternating filtrations under ΔPs of 1 and 10 kPa. The overall findings are essential to support emerging GDM filtration applications, in which membrane compaction has been ignored and confounded with membrane fouling. The role of compaction is more prominent for high-flux GDM filtration systems treating less-fouling-prone feed (i.e., rainwater, river water) and involving membrane cleaning (i.e., relaxation) in which both reversible and irreversible compaction occurred simultaneously.

Ultra-Low-Pressure Membrane Filtration for Simultaneous Recovery of Detergent and Water from Laundry Wastewater

Reusing water and excess detergent from the laundry industry has become an attractive method to combat water shortages. Membrane filtration is considered an advanced technique and highly attractive due to its excellent advantages. However, the conventional membrane filtration method suffers from membrane fouling, which restricts its performance and diminishes its economic viability. This study assesses the preliminary performance of submerged, gravity-driven membrane filtration—under ultra-low trans-membrane pressure (△P) of <0.1 bar—to combat membrane fouling issues for detergent and water recovery from laundry wastewater. The results show that even under ultra-low pressure, the membrane suffered from compaction that lowered its permeability by 14% under △P of 6 and 10 kPa, with corresponding permeabilities of 2085 ± 259 and 1791 ± 42 L/(m2 h bar). Filtration of a detergent solution also led to up to 8% permeability loss due to membrane fouling. During the filtration of laundry wastewater, 80−91% permeability loss was observed, leading to the lowest flux of 15.6 L/(m2·h) at △P of 10 kPa, 38% lower than △P of 6 kPa (of 25.2 L/(m2·h)). High △P led to both the membrane and the foulant compaction inflating the filtration resistance. The system could recover 83.6% of excess residual detergent, while most micelles were rejected (ascribed from 71% of COD removal). The TDS content could not be retained, disallowing maximum resource recovery. A gravity-driven filtration system can be self-sustained with minimum supervision in residential and industrial laundries. Nevertheless, a detailed study on long-term filtration performance and multiple cleaning cycles is still required in the future.

The Fouling Effect on Commercial Ceramic Membranes during Filtration of Microalgae Chlorella vulgaris and Monoraphidium contortum

Although interest in the use of membranes for the concentration of microalgal biomass has steadily been growing, little is known regarding the phenomena of membrane fouling. In addition, more attention has been given to polymeric membranes compared to ceramic membranes, which have a longer life that is associated with a higher resistance to aggressive chemical cleaning. In this study, microfiltration (MF) and ultrafiltration (UF) of two microalgae species, Chlorella vulgaris and Monoraphidium contortum, were carried out using tubular crossflow ceramic membranes. Permeate flux was measured, resistance was calculated, and dissolved organic carbon (DOC) was determined. The flux reduction during the first 10 min of filtration was higher for MF than UF (>70% and <50%), and steady-state permeate fluxes were <5% (for MF) and <25% (for UF) of initial (in m3 m−2 s−1) 6.2 × 10−4 (for MF) and 1.7 × 10−4 (for UF). Total resistances (in m−1) were in the ranges of 4.2–5.4 × 1012 (UF) and 2.6–3.1 × 1012 (MF) for M. contortum and C. vulgaris, respectively. DOC reduction was higher for UF membrane (>80%) than for MF (<66%) and DOC concentrations (mg C L−1) in permeates following MF and UF were about five and two, respectively. In conclusion, we demonstrated: (i) higher irreversible resistance for UF and reversible resistance for MF; (ii) permeate flux higher for UF and for M. contortum; (iii) the significant role of dissolved organic compounds in the formation of reversible resistance for MF and irreversible resistance for UF.

Confounding Effect of Wetting, Compaction, and Fouling in an Ultra-Low-Pressure Membrane Filtration: A Review

Ultra-low-pressure membrane (ULPM) filtration has emerged as a promising decentralized water and wastewater treatment method. It has been proven effective in long-term filtration under stable flux without requiring physical or chemical cleaning, despite operating at considerably lower flux. The use of ultra-low pressure, often simply by hydrostatic force (often called gravity-driven membrane (GDM) filtration), makes it fall into the uncharted territory of common pressure-driven membrane filtration. The applied polymeric membrane is sensitive to compaction, wetting, and fouling. This paper reviews recent studies on membrane compaction, wetting, and fouling. The scope of this review includes studies on those phenomena in the ULPM and how they affect the overall performance of the system. The performance of GDM systems for water and wastewater treatment is also evaluated. Finally, perspectives on the future research direction of ULPM filtration are also detailed.

Progress in Development of Nanostructured Manganese Oxide as Catalyst for Oxygen Reduction and Evolution Reaction

The rise in energy consumption is largely driven by the growth of population. The supply of energy to meet that demand can be fulfilled by slowly introducing energy from renewable resources. The fluctuating nature of the renewable energy production (i.e., affected by weather such as wind, sun light, etc.), necessitates the increasing demand in developing electricity storage systems. Reliable energy storage system will also play immense roles to support activities related to the internet of things. In the past decades, metal-air batteries have attracted great attention and interest for their high theoretical capacity, environmental friendliness, and their low cost. However, one of the main challenges faced in metal-air batteries is the slow rate of oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) that affects the charging and the discharging performance. Various types of nanostructure manganese oxide with high specific surface area and excellent catalytic properties have been synthesized and studied. This review provides a discussion of the recent developments of the nanostructure manganese oxide and their performance in oxygen reduction and oxygen evolution reactions in alkaline media. It includes the experimental work in the nanostructure of manganese oxide, but also the fundamental understanding of ORR and OER. A brief discussion on electrocatalyst kinetics including the measurement and criteria for the ORR and the OER is also included. Finally, recently reported nanostructure manganese oxide catalysts are also discussed.