Effect of xanthan gum or pectin addition on Sacha Inchi oil-in-water emulsions stabilized by ovalbumin or tween 80: Droplet size distribution, rheological behavior and stability

Ovalbumin/sodium alginate Pickering emulsion: Structural characteristics and its contribution to enhancing the gel properties of Hairtail (Trichiurus haumela) surimi

In this study, ovalbumin (OV) and sodium alginate (SA), two macromolecular complexes, were coagulated into the emulsifier (OV/SA), which stabilized soybean oil by electrostatic interaction, hydrophobic interactions, and hydrogen bonding. The structure of OV/SA and properties of OV/SA Pickering emulsion were investigated. Additionally, the effect of emulsions on the gel and protein properties of hairtail surimi was studied. The results revealed that with the increasing concentration of OV/SA, the particle size and zeta potential value (negative value) of the emulsion initially decreased and then increased, while the rheological properties gradually improved. Compared with the surimi gel directly supplemented with soybean oil, the addition of emulsion enhanced gel strength, whiteness, water holding capacity, and hydrophobic interactions, resulting in a more stable gel network structure. In summary, incorporating emulsion into surimi at the same lipid content not only maintained its gel properties but also improved its color and compensated for lipid loss.

The Emulsification and Stabilization Mechanism of an Oil-in-Water Emulsion Constructed from Tremella Polysaccharide and Citrus Pectin

The objective of this study was to investigate the feasibility of the mixture of tremella polysaccharide (TP) and citrus pectin (CP) as an emulsifier by evaluating its emulsifying ability/stability. The results showed that the TP:CP ratio of 5:5 (w/w) could effectively act as an emulsifier. CP, owing its lower molecular weight and highly methyl esterification, facilitated the emulsification of oil droplets, thereby promoting the dispersion of droplets. Meanwhile, the presence of TP enhanced the viscosity of emulsion system and increased the electrostatic interactions and steric hindrance, therefore hindering the migration of emulsion droplets, reducing emulsion droplets coalesce, and enhancing emulsion stability. The emulsification and stabilization performances were influenced by the molecular weight, esterified carboxyl groups content, and electric charge of TP and CP, and the potential mechanism involved their impact on the buoyant force of droplet size, viscosity, and steric hindrance of emulsion system. The emulsions stabilized by TP-CP exhibited robust environmental tolerance, but demonstrated sensitivity to Ca2+. Conclusively, the study demonstrated the potential application of the mixture of TP and CP as a natural polysaccharide emulsifier.

Ultrasonic and homogenization: An overview of the preparation of an edible protein-polysaccharide complex emulsion

Emulsion systems are extensively utilized in the food industry, including dairy products, such as ice cream and salad dressing, as well as meat products, beverages, sauces, and mayonnaise. Meanwhile, diverse advanced technologies have been developed for emulsion preparation. Compared with other techniques, high-intensity ultrasound (HIUS) and high-pressure homogenization (HPH) are two emerging emulsification methods that are cost-effective, green, and environmentally friendly and have gained significant attention. HIUS-induced acoustic cavitation helps in efficiently disrupting the oil droplets, which effectively produces a stable emulsion. HPH-induced shear stress, turbulence, and cavitation lead to droplet disruption, altering protein structure and functional aspects of food. The key distinctions among emulsification devices are covered in this review, as are the mechanisms of the HIUS and HPH emulsification processes. Furthermore, the preparation of emulsions including natural polymers (e.g., proteins-polysaccharides, and their complexes), has also been discussed in this review. Moreover, the review put forward to the future HIUS and HPH emulsification trends and challenges. HIUS and HPH can prepare much emulsifier-stable food emulsions, (e.g., proteins, polysaccharides, and protein-polysaccharide complexes). Appropriate HIUS and HPH treatment can improve emulsions' rheological and emulsifying properties and reduce the emulsions droplets' size. HIUS and HPH are suitable methods for developing protein-polysaccharide forming stable emulsions. Despite the numerous studies conducted on ultrasonic and homogenization-induced emulsifying properties available in recent literature, this review specifically focuses on summarizing the significant progress made in utilizing biopolymer-based protein-polysaccharide complex particles, which can provide valuable insights for designing new, sustainable, clean-label, and improved eco-friendly colloidal systems for food emulsion. PRACTICAL APPLICATION: Utilizing complex particle-stabilized emulsions is a promising approach towards developing safer, healthier, and more sustainable food products that meet legal requirements and industrial standards. Moreover, the is an increasing need of concentrated emulsions stabilized by biopolymer complex particles, which have been increasingly recognized for their potential health benefits in protecting against lifestyle-related diseases by the scientific community, industries, and consumers.

Covalent modification of (+)-catechin to improve the physicochemical, rheological, and oxidative stability properties of rice bran protein emulsion

The aim of this study is the effects of (+)-catechin (CC) covalent cross-linking (CCCI) (0.05-0.25 %, w/v) on the physicochemical properties, rheological properties, and oxidative stability of rice bran protein (RBP) emulsion. Analysis of particle size, ζ-potential, circular dichroism, fluorescence spectroscopy, surface hydrophobicity, and emulsifying properties demonstrated that a concentration of 0.15 % (w/v) CCCI facilitated protein structure unfolding, resulting in reduced particle size, enhanced electrostatic repulsion, and improved emulsion stability. Moreover, the covalent complexes of RBP-0.15 %CC (w/v) exhibited increased viscosity and shear stress, reflected by the highest G' and G″ values, ultimately enhancing the oxidative stability. Furthermore, analysis using atomic force microscopy and confocal laser scanning microscopy revealed that the RBP-0.15 %CC complexes exhibited the smallest particle size (164 nm) and displayed greater homogeneity. An increase in CC concentration to 0.25 % (w/v) resulted in a higher emulsion aggregation. The emulsions stabilized by CCCI exhibited superior rheological properties and enhanced oxidation stability compared to the control. In conclusion, an appropriate amount of CC can enhance the rheology and oxidation stability of the RBP emulsion, while CCCI treatment holds potential for expanding the utility of RBP in various applications.

Polysaccharides improved the viscoelasticity, microstructure, and physical stability of ovalbumin-ferulic acid complex stabilized emulsion

This study explored the mechanism underlying the interactions between polysaccharides and ovalbumin-ferulic acid (OVA-FA) and the effect of polysaccharides on OVA-FA-stabilized emulsions. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) were used to study the polysaccharide OVA-FA interactions mechanism and to resolve the changes in the protein secondary structure and crystal structure. OVA-FA-polysaccharide-stabilized emulsions were studied using confocal laser scanning microscopy (CLSM), and their rheological properties and stability were determined. The results showed that the non-covalent interactions between polysaccharides and OVA-FA led to an increase in the β-sheet content of OVA and a decrease in the α-helix and random coil contents. The stability of the OVA-FA-polysaccharide-stabilized emulsions was better compared with that of the OVA-FA-stabilized emulsions. By comparing the different OVA-FA-polysaccharide-stabilized emulsions, we observed that OVA-FA-agar did not stabilize the emulsion well, while the OVA-FA-SA- and OVA-FA-KC-stabilized emulsions had good elasticity, and the microstructure and storage stability of the OVA-FA-KC-stabilized emulsion were better. Our findings provide a new perspective for the application of OVA-FA-KC in complex food emulsions.

Fucoxanthin Loaded in Palm Stearin- and Cholesterol-Based Solid Lipid Nanoparticle-Microcapsules, with Improved Stability and Bioavailability In Vivo

Fucoxanthin (FX) is a marine carotenoid that has proven to be a promising marine drug due to the multiple bioactivities it possesses. However, the instability and poor bioavailability of FX greatly limit its application in pharmaceuticals or functional foods. In this study, the creative construction of a solid lipid nanoparticle-microcapsule delivery system using mixed lipids of palm stearin and cholesterol wrapped with gelatin/Arabic gum to load lipophilic FX was fabricated, aiming to improve the stability and bioavailability of FX. The results showed that the encapsulated efficiency (EE) and drug loading capacity (LC) of optimized FX microcapsules (FX-MCs) obtained were as high as 96.24 ± 4.60% and 0.85 ± 0.04%, respectively, after single-factor experiments. The average particle size was 1154 ± 54 nm with negative Zeta potential (−20.71 ± 0.93 mV) as depicted with size-zeta potential spectrometer. The differential scanning calorimeter (DSC) and thermogravimetric analyzer (TG) results indicated that FX-MC has a higher Tg and slower weight loss than FX monomers (FX crystal) and blank MCs. Besides, The Fourier transform infrared spectrometer (FTIR) confirmed the good double encapsulation of FX into the solid lipid and composite coacervate. Moreover, the encapsulated FX showed higher storage stability, sustained release (55.02 ± 2.80% release in 8 h), and significantly improved bioavailability (712.33%) when compared to free FX. The research results can provide a principle theoretical basis for the development and application of FX in pharmaceuticals or functional foods.

Bioactive compounds: Application of albumin nanocarriers as delivery systems

Enriched products with bioactive compounds (BCs) show the capacity to produce a wide range of possible health effects. Most BCs are essentially hydrophobic and sensitive to environmental factors; so, encapsulation becomes a strategy to solve these problems. Many globular proteins have the intrinsic ability to bind, protect, encapsulate, and introduce BCs into nutraceutical or pharmaceutical matrices. Among them, albumins as human serum albumin (HSA), bovine serum albumin (BSA), ovalbumin (OVA) and α-lactalbumin (ALA) are widely abundant, available, and applied in many industrial sectors, becoming promissory materials to encapsulate BCs. Therefore, this review focuses on researches about the main groups of natural origin BCs (namely phenolic compounds, lipids, vitamins, and carotenoids), the different types of nanostructures based on albumins to encapsulate them and the main fields of application for BCs-loaded albumin systems. In this context, phenolic compounds (catechins, quercetin, and chrysin) are the most extensively BCs studied and encapsulated in albumin-based nanocarriers. Other extensively studied subgroups are stilbenes and curcuminoids. Regarding lipids and vitamins; terpenes, carotenoids (β-carotene), and xanthophylls (astaxanthin) are the most considered. The main application areas of BCs are related to their antitumor, anti-inflammatory, and antioxidant properties. Finally, BSA is the most used albumin to produced BCs-loaded nanocarriers.

The emulsifying and foaming properties of Amuniacum gum (Dorema ammoniacum) in comparison with gum Arabic

In this study, the emulsifying and foaming properties of a novel exudate gum from Dorema ammoniacum (AMG) were assessed in comparison with the well-known gum Arabic from Acacia tree (GAC). The sunflower oil-based emulsion (10% v/v) containing various concentrations (5%-15% w/v) of AMG and GAC was prepared. At all concentrations, AMG showed higher surface and interface activity than GAC. Increasing in AMG and GAC concentrations caused to increase and decrease in Z average, respectively. Overall, the GAC-stabilized emulsion showed lower Z average and PDI value than the AMG-stabilized emulsion during storage time. The sample containing AMG showed higher emulsion capacity and lower emulsion stability in comparison with the one containing GAC at all concentrations. The storage stability decreased and increased with increasing in AMG and GAC concentrations, respectively. After two-week storage, the emulsions containing 10 and 15% AMG showed higher phase separation than those containing GAC; however, this was opposite about sample containing 5% AMG. At thermal, centrifuge, and freezing conditions, the emulsion containing 5% AMG indicated significantly higher stability than GAC samples; however, at higher concentration, opposite effect could be observed. The foaming capacity of the samples containing AMG increased from 81% to 93% by increasing gum concentration from 5% to 15%. The solutions containing AMG showed higher foam capacity than control samples (without gum) and those containing GAC at all concentrations. Increasing in AMG and GAC concentrations slightly improved foam stability, and the highest value (92%) belonged to 15% AMG solution.

Impact of proteins and polysaccharides on flavor release from oil-in-water emulsions during simulated cooking

Our objective was to establish the influence of biopolymer additives on the flavor release profiles of model food emulsions during simulated cooking. Allyl methyl disulfide (AMDS), a volatile hydrophobic flavor found in garlic, was used as a model aroma. This type of flavor compound is easily lost from foods during thermal processing and so there is a need to identify effective strategies to improve its retention and modulate its release profile. The impact of protein (sodium caseinate and whey protein) and polysaccharide (maltodextrin, xanthan gum, sodium alginate, corn starch, methyl cellulose, and β-cyclodextrin) addition (0.5%) on the flavor retention profile of AMDS-loaded emulsions subjected to simulated cooking was determined. Corn oil was used as the oil phase to formulate the oil-in-water emulsions. Emulsions were heated from room temperature to boiling and then held for 30 min to establish the impact of biopolymer addition on their flavor retention profiles. The impact of biopolymer concentration on flavor retention was also studied using maltodextrin (0-40%) and xanthan gum (0-0.5%). The flavor retention profiles of the emulsions containing 0.5% maltodextrin, sodium alginate, whey protein, sodium caseinate, or corn starch, were the same as those as the control (no additives). Conversely, addition of 0.5% methyl cellulose, β-cyclodextrin, or xanthan gum led to faster flavor release during cooking. The thermal stability of the emulsions appeared to be the dominant factor determining their flavor release: additives that promoted coalescence during heating led to faster flavor release. Moreover, addition of high levels of maltodextrin and xanthan gum promoted depletion flocculation, which also led to faster flavor release during heating. In contrast, there appeared to be no correlation between emulsion viscosity and the flavor release profile. These results are important for designing emulsion-based food products, such as sauces and soups, with controlled flavor release profiles during cooking.

Immobilization of Andean berry (Vaccinium meridionale) polyphenols on nanocellulose isolated from banana residues: A natural food additive with antioxidant properties

Nanocellulose obtained from banana rachis (NCBR) was loaded (through simple impregnation) with a polyphenolic-rich extract (PRE) of Andean berries (Vaccinium meridionale). The adsorption/desorption of polyphenols onto NCBR and the thermal stability and antioxidant activity of the polyphenolic-NCBR nanocomplex (NCX) was studied. Thermodynamic properties (ΔH°_ads, ΔS°_ads and ΔG°_ads) showed that polyphenols interact with NCBR by physisorption through a spontaneous and exothermic process. The NCX kept the original color of PRE (magenta) and released polyphenols in aqueous medium (80% of phenolic compounds in the first hour and 50% of anthocyanins in the first few minutes). The NCX showed high antioxidant activity, as evidenced by traditional assays, and inhibited the peroxyl radicals mediated oxidation of a tryptophan-containing peptide. Additionally, NCX inhibited lipid peroxidation in an emulsified system of Sacha inchi oil exposed to accelerated oxidative conditions. In conclusion, the NCX showed good properties as an antioxidant with potential use as a food additive.