Cytocompatible quaternized carboxymethyl chitosan/poly(vinyl alcohol) blend film loaded copper for antibacterial application

Glucose detection: In-situ colorimetric analysis with double-layer hydrogel microneedle patch based on polyvinyl alcohol and carboxymethyl chitosan

Skin interstitial fluid (ISF) has emerged as a significant reservoir of biomarkers for disease diagnosis and prevention. Microneedle (MN) patches are regarded as an optimal platform for ISF extraction from the skin due to their non-invasive nature. However, challenges such as prolonged sampling durations and complex detection procedures impede timely metabolic analysis. In this investigation, we amalgamated MN technology with immobilized enzyme technology to fabricate a dual-layer MN patch integrating sampling and detection functionalities, thereby enabling in-situ colorimetric detection of hyperglycemia. The tip layer of the patch, comprising polyvinyl alcohol/carboxymethyl chitosan (PVA/CMCS) MN, was synthesized utilizing a chemical crosslinking approach for the first time, with glucose oxidase (GOx) being incorporated. The hydrophilicity of CMCS expedited the extraction process, facilitating the retrieval of approximately 10 mg of ISF within 10 min. The backing layer consisted of an immobilized polyvinyl alcohol-chitosan-horseradish peroxidase (PVA-CS-HRP) hydrogel film loaded with 3,3', 5,5'-tetramethylbenzidine (TMB). Incorporating macromolecular polymer PVA and CS for HRP immobilization addressed the issue of poor stability associated with traditional natural enzymes, thereby enhancing the sensitivity of the reaction system. The in-situ colorimetric sensor facilitated minimally invasive ISF extraction and swift conversion of glucose levels into detectable color changes.

Dextran-Based Antibacterial Hydrogel Dressings for Accelerating Infected Wound Healing by Reducing Inflammation Levels

Infected wounds pose challenges such as exudate management, bacterial infections, and persistent inflammation, making them a significant challenge for modern dressings. To address these issues in infected wounds more effectively, aerogel-hydrogel biphase gels based on dextran are developed. The gel introduced in this study exhibits antibacterial and anti-inflammatory properties in the process of wound therapy, contributing to accelerated wound healing. The aerogel phase exhibits exceptional water-absorption capabilities, rapidly soaking up exudate from infected wound, thereby fostering a clean and hygienic wound healing microenvironment. Concurrently, the aerogel phase is enriched with hydrogen sulfide donors. Following water absorption and the formation of the hydrogel phase, it enables the sustained release of hydrogen sulfide around the wound sites. The experiments confirm that hydrogen sulfide, by promoting M2 macrophage differentiation and reducing the levels of inflammatory factors, effectively diminishes local inflammation levels at the wound site. Furthermore, the sodium copper chlorophyllin component within the hydrogel phase demonstrates effective antibacterial properties through photodynamic antimicrobial therapy, providing a viable solution to wound infection challenges.

Environmental Dyeing and Functionalization of Silk Fabrics with Natural Dye Extracted from Lac

Most traditional synthetic dyes and functional reagents used in silk fabrics are not biodegradable and lack green environmental protection. Natural dyes have attracted more and more attention because of their coloring, functionalization effects, and environmental benefits. In this study, natural dyes were extracted from lac and used for coloring and functionalization in silk fabrics without any other harmful dyes. The extraction conditions were studied and analyzed by the univariate method. The optimal extraction process was that the volume ratio of ethanol to water was 60:40 with a solid-liquid ratio of 1:10, and reacting under the neutrality condition for 1 h at 70 °C. Silk fabric can be dyed dark owing to the certain lifting property of lac. After being dyed by Al3+ post-medium, the levels of the washing fastness, light fastness, and friction fastness of silk fabric are all above four with excellent fastness. The results show that the dyed silk fabrics have good UV protection, antioxidation, and antibacterial properties. The UV protection coefficient UPF is 42.68, the antioxidant property is 98.57%, and the antibacterial property can reach more than 80%. Therefore, the dyeing and functionalization of silk fabrics by utilizing naturally lac dyes show broad prospects in terms of the application of green sustainable dyeing and functionalization.

Exudate-Induced Gelatinizable Nanofiber Membrane with High Exudate Absorption and Super Bactericidal Capacity for Bacteria-Infected Wound Management

Invasion of bacteria and continuous oozing of exudate are significant causes of interference with the healing of infected wounds. Therefore, an exudate-induced gelatinizable and near-infrared (NIR)-responsive nanofiber membrane composed of polyvinyl alcohol (PVA), carboxymethyl chitosan (CMC), and Fe-doped phosphomolybdic acid (Fe-PMA) with exceptional exudate absorption capacity and potent bactericidal efficacy is developed and denoted as the PVA-FP-CMC membrane. After absorbing exudate, the fiber membrane can transform into a hydrogel membrane, forming coordination bonds between the Fe-PMA and CMC. The unique exudate-induced gelation process imparts the membrane with high exudate absorption and retention capability, and the formed hydrogel also traps the bacteria that thrive in the exudate. Moreover, it is discovered for the first time that the Fe-PMA exhibits an enhanced photothermal conversion capability and photocatalytic activity compared to the PMA. Therefore, the presence of Fe-PMA provides the membrane with a photothermal and photodynamic therapeutic effect for killing bacteria. The PVA-FP-CMC membrane is proven with a liquid absorption ratio of 520.7%, a light-heat conversion efficiency of 41.9%, high-level generation of hydroxyl radical (•OH) and singlet oxygen (1O2), and a bacterial killing ratio of 100% for S. aureus and 99.6% for E. coli. The treatment of infected wounds on the backs of rats further confirms the promotion of wound healing by the PVA-FP-CMC membrane with NIR irradiation. Overall, this novel functional dressing for the synergistic management of bacteria-infected wounds presents a promising therapeutic strategy for tissue repair and regeneration.

Development of anti-bacterial adhesion and antibacterial sulfobetaines modified chitosan/polyvinyl alcohol composite films as packaging materials

Chitosan exhibits a wide source, non-toxic and biodegradable, and is the optimal functional raw material for preparing food packaging materials. However, the pure chitosan film has some disadvantages such as limited antibacterial activity and weak mechanical properties. In this study, sulfobetaines modified chitosan (CS-SBMA) was synthesized by grafting copolymerized betaine methacrylate sulfonate onto the chain of chitosan to improve the anti-bacterial adhesion and antibacterial properties of chitosan, aiming to develop antibacterial and anti-bacterial adhesion films based on CS-SBMA and polyvinyl alcohol (PVA) by the casting method. The structure of CS-SBMA was characterized by 1H NMR and FTIR. The appropriate proportion of CS-SBMA/PVA was determined to be 1/1 and 1/2, by characterizing the composite films with FTIR, XRD, SEM, mechanical, optical, and water resistance behaviors. In addition, CS-SBMA/PVA films showed excellent antibacterial, anti-bacterial adhesion and biofilm control function. The colonies number of E. coli and S. aureus on the surface of CS-SBMA/PVA 1/1 film decreased 94.15 % and 94.27 %, respectively, and 92.93 % of S. aureus and 94.87 % of E. coli colonies were inactivated within 60 min contact. These results indicate that CS-SBMA/PVA film exhibits potential antibacterial and anti-bacterial adhesion properties, which is suitable for food packaging materials.

Rapid hemostatic antibacterial self-gelling powder based on methacryloylsulfonyl betaine and quaternized carboxymethyl chitosan

Hemostatic powders can be used for deep wounds and wounds with irregular shapes that are frequently inaccessible to traditional hemostatic dressings like hemostatic gauze, sponges, and foams. In this study, sulfobetaine methacrylate (SBMA) and quaternized carboxymethyl chitosan (QCCS) were combined to create an antibacterial hemostatic hydrogel through photopolymerization under green LED irradiation, which was then changed into PSBMA/QCCS powder. PSBMA/QCCS powder could quickly form hydrogel with strong wet adhesion. The internal structure, water absorption capacity, and adhesion properties of the powder were evaluated. The coagulation ability, antimicrobial properties, and biocompatibility of the powder were also characterized. The PSBMA/QCCS powder could aggregate blood cells and platelets to enhance hemostasis. Meanwhile, PSBMA/QCCS powder also showed effective antibacterial ability against both gram-positive bacteria (Staphylococcus aureus) and gram-negative bacteria (Escherichia coli). In summary, PSBMA/QCCS powder is a promising hemostatic agent with the characteristics of quick hemostasis, tough wet adhesion, satisfactory biocompatibility, considerable antibacterial effect, and adaptability to any irregularly shaped wounds.

Antibacterial, injectable, and adhesive hydrogel promotes skin healing

With the development of material science, hydrogels with antibacterial and wound healing properties are becoming common. However, injectable hydrogels with simple synthetic methods, low cost, inherent antibacterial properties, and inherent promoting fibroblast growth are rare. In this paper, a novel injectable hydrogel wound dressing based on carboxymethyl chitosan (CMCS) and polyethylenimine (PEI) was discovered and constructed. Since CMCS is rich in -OH and -COOH and PEI is rich in -NH₂, the two can interact through strong hydrogen bonds, and it is theoretically feasible to form a gel. By changing their ratio, a series of hydrogels can be obtained by stirring and mixing with 5 wt% CMCS aqueous solution and 5 wt% PEI aqueous solution at volume ratios of 7:3, 5:5, and 3:7. Characterized by morphology, swelling rate, adhesion, rheological properties, antibacterial properties, in vitro biocompatibility, and in vivo animal experiments, the hydrogel has good injectability, biocompatibility, antibacterial (Staphylococcus aureus: 56.7 × 10⁷ CFU/mL in the blank group and 2.5 × 10⁷ CFU/mL in the 5/5 CPH group; Escherichia coli: 66.0 × 10⁷ CFU/mL in the blank group and 8.5 × 10⁷ CFU/mL in the 5/5 CPH group), and certain adhesion (0.71 kPa in the 5/5 CPH group) properties which can promote wound healing (wound healing reached 98.02% within 14 days in the 5/5 CPH group) and repair of cells with broad application prospects.

Applications and perspectives of quaternized cellulose, chitin and chitosan: A review

Recently, increasing attention has been paid to natural polysaccharides for their low cost, biocompatibility and biodegradability. Quaternization is a modification method to improve the solubility and antibacterial ability of natural polysaccharides. Water-soluble derivatives of cellulose, chitin and chitosan offer the prospect of diverse applications in a wide range of fields, such as antibacterial products, drug delivery, wound healing, sewage treatment and ion exchange membranes. By combining the inherent properties of cellulose, chitin and chitosan with the inherent properties of the quaternary ammonium groups, new products with multiple functions and properties can be obtained. In this review, we summarized the research progress in the applications of quaternized cellulose, chitin and chitosan in recent five years. Moreover, ubiquitous challenges and personal perspectives on the further development of this promising field are also discussed.

Biodegradable Polymers and Polymer Composites with Antibacterial Properties

Antibiotic resistance is one of the greatest threats to global health and food security today. It becomes increasingly difficult to treat infectious disorders because antibiotics, even the newest ones, are becoming less and less effective. One of the ways taken in the Global Plan of Action announced at the World Health Assembly in May 2015 is to ensure the prevention and treatment of infectious diseases. In order to do so, attempts are made to develop new antimicrobial therapeutics, including biomaterials with antibacterial activity, such as polycationic polymers, polypeptides, and polymeric systems, to provide non-antibiotic therapeutic agents, such as selected biologically active nanoparticles and chemical compounds. Another key issue is preventing food from contamination by developing antibacterial packaging materials, particularly based on degradable polymers and biocomposites. This review, in a cross-sectional way, describes the most significant research activities conducted in recent years in the field of the development of polymeric materials and polymer composites with antibacterial properties. We particularly focus on natural polymers, i.e., polysaccharides and polypeptides, which present a mechanism for combating many highly pathogenic microorganisms. We also attempt to use this knowledge to obtain synthetic polymers with similar antibacterial activity.

Copper-based nanoparticles for biopolymer-based functional films in food packaging applications

This review summarizes the latest developments in the design, fabrication, and application of various Cu-based nanofillers to prepare biopolymer-based functional packaging films, focusing on the effects of inorganic nanoparticles on the optical, mechanical, gas barrier properties, moisture sensitivity, and functional properties of the films. In addition, the potential application of Cu-based nanoparticle-added biopolymer films for fresh food preservation and the effect of nanoparticle migration on food safety were discussed. The incorporation of Cu-based nanoparticles improved the film properties with enhanced functional performance. Cu-based nanoparticles such as copper oxide, copper sulfide, copper ions, and copper alloys affect biopolymer-based films differently. The properties of composite films containing Cu-based nanoparticles depend on the concentration of the filler, the state of dispersion, and the interaction of the nanoparticles with the biopolymer matrix in the film. The composite film filled with Cu-based nanoparticles effectively extended the shelf life by maintaining the quality of various fresh foods and securing safety. However, studies on the migration characteristics and safety of copper-based nanoparticle food packaging films are currently being conducted on plastic-based films such as polyethylene, and research on bio-based films is limited.

Quaternary Ammonium Salts: Insights into Synthesis and New Directions in Antibacterial Applications

The overuse of antibiotics has led to the emergence of a large number of antibiotic-resistant genes in bacteria, and increasing evidence indicates that a fungicide with an antibacterial mechanism different from that of antibiotics is needed. Quaternary ammonium salts (QASs) are a biparental substance with good antibacterial properties that kills bacteria through simple electrostatic adsorption and insertion into cell membranes/altering of cell membrane permeability. Therefore, the probability of bacteria developing drug resistance is greatly reduced. In this review, we focus on the synthesis and application of single-chain QASs, double-chain QASs, heterocyclic QASs, and gemini QASs (GQASs). Some possible structure-function relationships of QASs are also summarized. As such, we hope this review will provide insight for researchers to explore more applications of QASs in the field of antimicrobials with the aim of developing systems for clinical applications.

Biomembrane-Based Nanostructure- and Microstructure-Loaded Hydrogels for Promoting Chronic Wound Healing

Wound healing is a complex and dynamic process, and metabolic disturbances in the microenvironment of chronic wounds and the severe symptoms they cause remain major challenges to be addressed. The inherent properties of hydrogels make them promising wound dressings. In addition, biomembrane-based nanostructures and microstructures (such as liposomes, exosomes, membrane-coated nanostructures, bacteria and algae) have significant advantages in the promotion of wound healing, including special biological activities, flexible drug loading and targeting. Therefore, biomembrane-based nanostructure- and microstructure-loaded hydrogels can compensate for their respective disadvantages and combine the advantages of both to significantly promote chronic wound healing. In this review, we outline the loading strategies, mechanisms of action and applications of different types of biomembrane-based nanostructure- and microstructure-loaded hydrogels in chronic wound healing.

Humidity-/Sweat-Sensitive Electronic Skin with Antibacterial, Antioxidation, and Ultraviolet-Proof Functions Constructed by a Cross-Linked Network

Most electronic skins (e-skins) show unique performance or possess sensory functions. The raw materials used for their preparation are potentially toxic or harmful, and there may be problems such as poor compatibility between the conductive fillers and polymers. In this paper, a silver-loaded nanocomposite film (PVA/CMS/vanillin/nanoAg) was prepared by the in situ reduction method in a greener route. The mechanical properties of this nanocomposite film had improved with a tensile strength of 30.95 MPa, an elongation at break of 101.9%, and a Young's modulus of 10.62 MPa. In the composite matrix, a cross-linked network was constructed based on the coordination and hydrogen bonds, which was conducive to the stability of the reduced AgNPs and AgNWs. When applied as an e-skin in humidity/sweat sensors and wearable electronics, the nanocomposite film responds to humidity within 60 s and records the electric signals of human joint movements and skin sweating with a response range of 0-140% to strain at 93% RH. This kind of e-skin has excellent antibacterial and antioxidant activities and shows an outstanding ultraviolet-proof performance, which provides a greener promising reference route for the design of wearable e-skins to monitor the health and movements of humans.

Corrigendum: Applications of chitosan and its derivatives in skin and soft tissue diseases

[This corrects the article DOI: 10.3389/fbioe.2022.894667.].

Genipin-crosslinked amphiphilic chitosan films for the preservation of strawberry

As a material for films used to keep fruits fresh, chitosan has attracted extensive interest because of its advantages of degradability, environmental friendliness, and biocompatibility. In this study, two amphiphilic chitosan derivative films were prepared by crosslinking N-2-hydroxypropyl-3-butyl ether-O-carboxymethyl chitosan (HBCC) and N-2-hydroxypropyl-3-(2-ethylhexyl glycidyl ether)-O-carboxymethyl chitosan (H2ECC)) with genipin, an excellent natural cross-linking agent. The microstructures, mechanical properties, water vapor permeability, swelling ratios, light transmittance, wettability, thermal stability, antibacterial properties, and biocompatibility of the crosslinked films were characterized. The results showed that the crosslinked films had compact structures, low moisture permeability, strong water resistance, strong ultraviolet resistance, unaffected visible light transmittance, and good hydrophilicity. Compared with the uncrosslinked films, the tensile strength of the genipin-crosslinked ones was increased by 328.33 % (HBCC) and 397.83 % (H2ECC). More importantly, the crosslinked films had strong antibacterial activity against Staphylococcus aureus and Escherichia coli and were non-toxic to endothelial cells. The crosslinked films could effectively prolong the preservation time of strawberries, inhibit the decay of strawberries, and inhibit the reduction of vitamin C in strawberries. In conclusion, genipin-crosslinked HBCC and H2ECC films are potential fruit preservation materials.

Applications of Chitosan and its Derivatives in Skin and Soft Tissue Diseases

Chitosan and its derivatives are bioactive molecules that have recently been used in various fields, especially in the medical field. The antibacterial, antitumor, and immunomodulatory properties of chitosan have been extensively studied. Chitosan can be used as a drug-delivery carrier in the form of hydrogels, sponges, microspheres, nanoparticles, and thin films to treat diseases, especially those of the skin and soft tissue such as injuries and lesions of the skin, muscles, blood vessels, and nerves. Chitosan can prevent and also treat soft tissue diseases by exerting diverse biological effects such as antibacterial, antitumor, antioxidant, and tissue regeneration effects. Owing to its antitumor properties, chitosan can be used as a targeted therapy to treat soft tissue tumors. Moreover, owing to its antibacterial and antioxidant properties, chitosan can be used in the prevention and treatment of soft tissue infections. Chitosan can stop the bleeding of open wounds by promoting platelet agglutination. It can also promote the regeneration of soft tissues such as the skin, muscles, and nerves. Drug-delivery carriers containing chitosan can be used as wound dressings to promote wound healing. This review summarizes the structure and biological characteristics of chitosan and its derivatives. The recent breakthroughs and future trends of chitosan and its derivatives in therapeutic effects and drug delivery functions including anti-infection, promotion of wound healing, tissue regeneration and anticancer on soft tissue diseases are elaborated.

Versatile Bilayer Hydrogel for Wound Dressing through PET-RAFT Polymerization

Multifunctional hydrogel-based wound dressings have been explored for decades due to their huge potential in multifaceted medical intervention to wound healing. However, it is usually not easy to fabricate a single hydrogel with all of the desirable functions at one time. Herein, a bilayer model with an outer layer for hydrogel wound dressing was proposed. The inner layer (H_m-PN_n) was a hybrid hydrogel prepared by N-isopropylacrylamide and chitosan-N-2-hydroxypropyl trimethylammonium chloride (HACC), and the outer layer (PVA_o-PAm_p) was prepared by polyvinyl alcohols and acrylamide. The two hydrogel layers of the bilayer model were covalently connected with excellent interfacial strength by photoinduced electron/energy transfer-reversible addition-fragmentation chain transfer (PET-RAFT) polymerization. The outer layer exposed to the ambient environment exhibited good stretchability and toughness, while the inner-layer hydrogel adhered to the skin exhibited excellent softness, antibacterial activity, thermoresponsivity, and biocompatibility. In particular, the inner layer of a hydrogel demonstrated excellent antibacterial capability toward both Staphylococcus aureus as Gram-positive bacteria and Escherichia coli as Gram-negative bacteria. Cell cytotoxicity showed that the cell viability of all H_m-PN_n layer hydrogels exceeds 80%, confirming that the hydrogels bear excellent biocompatibility. In vivo experimental results indicated that the H_m-PN_n/PVA_o-PAm_p bilayer hydrogel has a significant effect on the acceleration of wound healing, which was demonstrated in a full-thickness skin defect model showing improved collagen disposition and granulation tissue thickness. With these results, the established multifunctional bilayer hydrogel exhibits potential as an excellent wound dressing for wound healing applications, especially for open and infected traumas.

Mineral medicine: from traditional drugs to multifunctional delivery systems

Mineral drugs are an important constituent of traditional Chinese medicine (TCM). Taking minerals that contain heavy metals as drugs is a very national characteristic part of TCM. However, the safety and scientific nature of mineral drugs are controversial owing to their heavy metals and strong toxicity. In 2000, the Food and Drug Administration (FDA) authorized arsenic trioxide (ATO) as first-line therapy for acute promyelocytic leukemia. This makes the development and utilization of mineral drugs become a research hotspot. The development of nanomedicine has found a great prospect of mineral drugs in nano-delivery carriers. And that will hold promise to address the numerous biological barriers facing mineral drug formulations. However, the studies on mineral drugs in the delivery system are few at present. There is also a lack of a detailed description of mineral drug delivery systems. In this review, the advanced strategies of mineral drug delivery systems in tumor therapy are summarized. In addition, the therapeutic advantages and research progress of novel mineral drug delivery systems are also discussed. Here, we hope that this will provide a useful reference for the design and application of new mineral drug delivery systems.

Effect of Copper and Titanium-Exchanged Montmorillonite Nanostructures on the Packaging Performance of Chitosan/Poly-Vinyl-Alcohol-Based Active Packaging Nanocomposite Films

In this study, CuMt and TiMt montmorillonites were produced via an ion-exchange process with Cu⁺ and Ti⁴⁺ ions. These nanostructured materials were characterized with X-ray diffraction (XRD) and fourier transform infrared spectroscopy (FTIR) measurements and added as nanoreinforcements and active agents in chitosan (CS)/poly-vinyl-alcohol (PVOH)-based packaging films. The developed films were characterized by XRD and FTIR measurements. The antimicrobial, tensile, and oxygen/water-barrier measurements for the evaluation of the packaging performance were carried out to the obtained CS/PVOH/CuMt and CS/PVOH/TiMt films. The results of this study indicated that CS/PVOH/CuMt film is a stronger intercalated nanocomposite structure compared to the CS/PVOH/TiMt film. This fact reflected higher tensile strength and water/oxygen-barrier properties. The antibacterial activity of these films was tested against four food pathogenic bacteria: Escherichia coli, Staphylococcus aureus, Salmonella enterica and Listeria monocytogenes. Results showed that in most cases, the antibacterial activity was generated by the CuMt and TiMt nanostructures. Thus, both CS/PVOH/CuMt and CS/PVOH/TiMt films are nanocomposite candidates with very good perspectives for future applications on food edible active packaging.

Copper metal-organic framework embedded carboxymethyl chitosan-g-glutathione/polyacrylamide hydrogels for killing bacteria and promoting wound healing

Bacterial infection and its induced oxidative stress as major clinical challenge during wound healing call for an urgent response for the development of medical dressings with multi-functions, such as antioxidant and antibacterial. To meet this demand, copper metal organic framework nanoparticles (HKUST NPs) and carboxymethyl chitosan-g-glutathione (CMCs-GSH) were synthesized and characterized. By embedding HKUST NPs into PAM/CMCs-GSH hydrogel (AOH), we developed a novel hydrogel dressing (HKUST-Hs) with dual effects of antibacterial and antioxidant. The morphology, swelling behavior, oxidation resistance and antibacterial properties of HKUST-Hs were investigated as well as the slow-release behavior of copper ions. Full-thickness cutaneous wound model of rats was created to assess the promoting effect of HKUST-Hs on wound healing. We found that HKUST NPs could be well dispersed in HKUST-Hs by shielding the positive charge of copper ions, and thus copper ions released were uniformly distributed and chelated with CMCs-GSH to promote the swelling stability of HKUST-Hs. Also, HKUST-Hs exhibited good free radical scavenging ability in vitro antioxidant assay. Meanwhile, a gradient sustained-release system of copper ions was formed in HKUST-Hs owing to the inhibition of HKUST NPs to copper release and the chelation of CMCs-GSH, which effectively inhibited the explosive release of copper ions and prolonged the release period, thereby reducing cytotoxicity. In vitro antibacterial test demonstrated there was synergistic antibacterial effect between the slow-released copper ions and CMCs-GSH, which improved the antibacterial activity and antibacterial persistence of HKUST-Hs. Finally, HKUST-Hs accelerated wound healing in vivo by continuously killing bacteria and inhibiting oxidative stress.

Functional chitosan/glycidyl methacrylate-based cryogels for efficient removal of cationic and anionic dyes and antibacterial applications

In this study, we constructed a novel family of chitosan-based cryogels with antibacterial activity to treat different types of dye wastewater. Glycidyl methacrylate (GMA) cross-linked chitosan (CS) cryogels functionalized with negatively and positively molecules were prepared via thermo-crosslinking and freeze-drying methods. These chitosan-based cryogels present a well-defined three-dimensional microporous network structure with ultra-light and high porosity, and have high water absorption ability. For CS/GMA/SMA cryogels, 71.20% of Cationic Yellow X-8GL (CY) can be removed, and the process kinetics well corresponded to the Pseudo-second order model and Freundlich model. The quantity and percent of Reactive Yellow B-4RFN (RY) removal by CS/GMA/DMC cryogel reached at 224.6 mg/g and 96.11%, which closely fitted the Pseudo-second order model and Dubinin-Radushkevich isotherm. Furthermore, the chitosan-based cryogels showed antibacterial efficacies against E. coli and S. aureus. The prepared chitosan-based cryogels with adsorption and antibacterial properties have great potential for the remediation of dyeing wastewater.

Trends in Chitosan as a Primary Biopolymer for Functional Films and Coatings Manufacture for Food and Natural Products

Some of the current challenges faced by the food industry deal with the natural ripening process and the short shelf-life of fresh and minimally processed products. The loss of vitamins and minerals, lipid oxidation, enzymatic browning, and growth of microorganisms have been the main issues for many years within the innovation and improvement of food packaging, which seeks to preserve and protect the product until its consumption. Most of the conventional packaging are petroleum-derived plastics, which after product consumption becomes a major concern due to environmental damage provoked by their difficult degradation. In this sense, many researchers have shown interest in edible films and coatings, which represent an environmentally friendly alternative for food packaging. To date, chitosan (CS) is among the most common materials in the formulation of these biodegradable packaging together with polysaccharides, proteins, and lipids. The good film-forming and biological properties (i.e., antimicrobial, antifungal, and antiviral) of CS have fostered its usage in food packaging. Therefore, the goal of this paper is to collect and discuss the latest development works (over the last five years) aimed at using CS in the manufacture of edible films and coatings for food preservation. Particular attention has been devoted to relevant findings in the field, together with the novel preparation protocols of such biodegradable packaging. Finally, recent trends in new concepts of composite films and coatings are also addressed.

Novel porous chitosan/N-halamine structure with efficient antibacterial and hemostatic properties

In this work, a novel chitosan based structure (CS/EVC) with low density, high porosity, three-dimensional porous structure and great adsorption capability has been prepared by using 1,2-epoxy-4-vinyl cyclohexane (EVC) as a cross-linker. After immersing CS/EVC in N-halamine 1-chloro-2,2,5,5-tetramethyl-4-imidazolinone (MC) solution, antibacterial CS/EVC/MC compounds were obtained. Compared with chitosan and CS/EVC controls, CS/EVC/MC showed excellent antimicrobial activities, which could inactivate both more than 6 logs (×1/1,000,000) of Staphylococcus aureus (ATCC 6538) and Escherichia coli (ATCC 8099) within 30 and 10 min, respectively. Moreover, the relatively low blood clotting index of CS/EVC/MC and the activation of platelets adhering to the surfaces indicated that the CS/EVC/MC sample is potential to promote the agglutination abilities of blood cells and simultaneously control wound bleeding. In addition, in vitro cytotoxicity test showed that the CS/EVC/MC had no cytotoxicity. The material might thus have a great potential for biomedical applications.

Quaternary Ammonium Chitosans: The Importance of the Positive Fixed Charge of the Drug Delivery Systems

As a natural polysaccharide, chitosan has good biocompatibility, biodegradability and biosecurity. The hydroxyl and amino groups present in its structure make it an extremely versatile and chemically modifiable material. In recent years, various synthetic strategies have been used to modify chitosan, mainly to solve the problem of its insolubility in neutral physiological fluids. Thus, derivatives with negative or positive fixed charge were synthesized and used to prepare innovative drug delivery systems. Positively charged conjugates showed improved properties compared to unmodified chitosan. In this review the main quaternary ammonium derivatives of chitosan will be considered, their preparation and their applications will be described to evaluate the impact of the positive fixed charge on the improvement of the properties of the drug delivery systems based on these polymers. Furthermore, the performances of the proposed systems resulting from in vitro and ex vivo experiments will be taken into consideration, with particular attention to cytotoxicity of systems, and their ability to promote drug absorption.

Amphiphilic diethylaminoethyl chitosan of high molecular weight as an edible film

Edible films and coatings can enhance the quality of food products, protecting them from biological deterioration, especially against fungal diseases and pathogenic microorganisms. In this study, films from chitosan, diethylaminoethyl-chitosan (DEAE-CH) and its hydrophobicized derivative DEAE-CH-DD were prepared by casting and their physicochemical and antimicrobial properties evaluated. The grafting with DEAE and dodecyl groups resulted in films with an elasticity modulus up to five times higher than commercial chitosan and increased water vapor permeability. Field emission gun - scanning electron microscopy and atomic force microscopy techniques showed films with smooth surfaces and the contact angle measurements revealed a correlation between the grafted group and hydrophilic/hydrophobic nature of the surface of the film. The amphiphilic derivatives exhibited better antimicrobial activity than unmodified chitosan against Penecillium expansum, Alternaria alternata and Alternaria solani. The amphiphilics DEAE-CH and DEAE-CH-DD showed no toxicity and delayed rotting and loss of water in strawberries and bananas, suggesting that this kind of film has great potential for increasing the shelf-life of different fruits.

Enhancement of UV absorbance and mechanical properties of chitosan films by the incorporation of solvolytically fractionated lignins

In this work, an effective sequential organic solvent extraction of kraft and organosolv lignins was carried out to separate lignin into more homogeneous fractions with specific properties. The selected solvents were ethyl acetate, ethanol, methanol, and acetone in that order. Fractions were analysed in terms of their yield, molecular weight, S/G ratio, and phenolic hydroxyl groups content. The incorporation of lignin fractions into the chitosan was aimed to increase the UV absorbance and the mechanical resistance of the chitosan films, which would provide good properties for applications in the packaging field. Films were analysed in terms of UV-vis absorption spectra, tensile strength, as well as colour changes. Results showed a significant increase in the absorbance of UV-A and UV-B with the addition of lignin fractions, mechanical properties showed an increase in the ultimate tensile strength in case of kraft fractions, while organosolv fractions do not affect tensile strength significantly.