Physicochemical and rheological characterization of pectin-rich fraction from blueberry (Vaccinium ashei) wine pomace

Designing novel ice creams using nut oil emulsion gels based on blueberry pectin and CaCl2 as fat replacers: Insights from physicochemical and sensory properties

This study aimed to utilize blueberry pectin and calcium chloride to design a gel network structure for loading nut oils (peanut and walnut oil, respectively). The optimization of emulsion gel preparation was conducted through orthogonal experiments, utilizing the oil-holding ratio and gel strength as critical indicators. The emulsion gel was applied to the ice cream production. It was revealed that the peroxide value of the nut oil emulsion gels was significantly lower than that of nut oils. Both nut oil emulsion gel ice creams exhibited higher expansion rates, lower melting rates, and decreased hardness than the nut oil ice creams. Notably, walnut oil emulsion gel ice cream demonstrated a melting rate similar to traditional butter-based ice cream. Emulsion gel ice cream has higher fat globule instability and viscosity. Overall, the comprehensive emulsion gel ice cream indicators were comparable to conventional butter ice cream and notably superior to peanut and walnut oil ice cream. Using emulsion gel as a fat substitute in ice cream was feasible. The implications of these results were significant for advancing the utilization of nut oil emulsion gel within the ice cream industry.

Sucrose and Ca2+ synergistically regulate the rheological properties of apple high-methoxyl pectin

The thickening and gelling mechanism of high-methoxyl pectins (HMPs) with different degree of esterification (DE) values (60.6 %, 66.1 %, and 72.4 %) synergistically affected by calcium ion (Ca2+) and sucrose was investigated using several technical methods. Rheological measurements, including steady-shear flow, thixotropy and dynamic viscoelasticity tests, texture analysis, water-holding capacity (WHC), thermal analyses (TG), and microstructure observation (TEM), were all systemically conducted. The results showed that the main thickening and gelling mechanism of Ca2+ on different HMPs was complex and the presence of sucrose had a synergistic effect on structure formation in HMP systems. Ca2+ was not always conducive to structure formation, and excessive Ca2+ addition may hinder structure formation. HMP systems with lower DE values had higher gel strengths due to the presence of more binding domains. The results of the texture properties, WHC, and thermal characteristics coincided with those obtained from the rheological measurements, which reflect the variations in HMPs affected by Ca2+ and DE. All of these results showed that Ca2+ addition at an appropriate concentration in the presence of sucrose favors HMP gelation even in the absence of acid. The results obtained here are expected to broaden the application of HMPs in acid-free gel food products.

Structural and flow rheological properties of pumpkin pectic polysaccharide extracted by citric acid

The present study aimed to investigate the structural and physicochemical characteristics of acid-extracted pumpkin pectic polysaccharide (AcPP) and to evaluate their flow rheological properties. AcPP was extracted from pumpkin pulp using the citric acid extraction method. The physicochemical and structural properties were analyzed by chemical methods and instrumental analyses. The obtained results showed that AcPP consisted predominantly of GalA (85.99 %) and small amounts of Rha, Gal, and Ara, with the ratio of HG/RG-I being 81.39/16.75. In addition, AcPP had medium DE (45.34 %) and contained four macromolecular populations with different Mw of 106.03 (main), 10.15, 4.99, and 2.90 kDa. The NMR analysis further confirmed that AcPP contained a linear backbone consisting of α-1,4-linked GalA residues, some of which were partially methyl-esterified. Furthermore, AcPP was amorphous in nature and had favorable thermal stability. The effects of extrinsic factors on the flow rheological properties of AcPP were evaluated. In particular, the high concentrations of CaCl2 (8 mM) and MgCl2 (10 mM) were effective in enhancing the viscosity and non-Newtonian shear-thinning behavior of the AcPP solution. This study elucidates the unique molecular structure of AcPP and suggests the potential of AcPP as a rheology modifier in low-viscous and mineral-reinforced beverages.

Tailoring the composition, antioxidant activity, and prebiotic potential of apple peel by Aspergillus oryzae fermentation

Apple peel is a typical lignocellulosic food by-product rich in functional components. In this work, apple peel was solid-state fermented with Aspergillus oryzae with an aim to modulate its composition and bioactivity. The results showed that A. oryzae fermentation substantially tailored the composition, improved the antioxidant activity and prebiotic potential of apple peel. Upon the fermentation, 1) free phenolics increased and antioxidant activity improved; 2) the pectin substances degraded significantly, along with a decrease in soluble dietary fiber while an increase in insoluble dietary fiber; 3) the in vitro fermentability increased as indicated by the increase in total acid production. The gut microbiota was shaped with more health-promoting potentials, such as higher abundances of Lactobacillus, Bifidobacterium, Megamonas and Prevotella-9 as well as lower abundances of Enterobacter and Echerichia-Shigella. This work is conducive to the modification of apple peel as a potential ingredient in food formulations.

Structural characterization, antioxidant and antibacterial activity of three pectin polysaccharides from blueberry

In this study, three pectin polysaccharides BP1, BP2 and BP3, were purified from blueberries. The weight-average molecular weight (Mw) of BP1, BP2, and BP3 were detected to be 9.027 × 104, 9.313 × 104, and 1.223 × 106 Da, respectively. The structures of the three pectin polysaccharides were characterized and compared based on the results of molecular weight, monosaccharide composition, GC-MS and NMR analysis. Structural characterization revealed that BP1, BP2, and BP3 all contain homogalacturonan (HG) and rhamnogalacturonan I (RG-I) domains, and the rhamnose residues in RG-I domains are substituted at C-4 with side chains such as araban and galactosan. BP2 had the highest degree of esterification and HG domain ratio, followed by BP3 and BP1. In addition, BP1, BP2 and BP3 showed great antioxidant and antibacterial activities, and could destroy the cell membrane of Staphylococcus aureus and Escherichia coli. Moreover, the better DPPH and ABTS free radical scavenging and antibacterial activities of BP1 and BP2 than BP3 might be related to their lower molecular weight. The results of this study will provide essential information for the structure-activity relationship of pectin polysaccharides and research basis for development and application of blueberry pectin polysaccharides.

Recent progress and treatment strategy of pectin polysaccharide based tissue engineering scaffolds in cancer therapy, wound healing and cartilage regeneration

Natural polymers and its mixtures in the form of films, sponges and hydrogels are playing a major role in tissue engineering and regenerative medicine. Hydrogels have been extensively investigated as standalone materials for drug delivery purposes as they enable effective encapsulation and sustained release of drugs. Biopolymers are widely utilised in the fabrication of hydrogels due to their safety, biocompatibility, low toxicity, and regulated breakdown by human enzymes. Among all the biopolymers, polysaccharide-based polymer is well suited to overcome the limitations of traditional wound dressing materials. Pectin is a polysaccharide which can be extracted from different plant sources and is used in various pharmaceutical and biomedical applications including cartilage regeneration. Pectin itself cannot be employed as scaffolds for tissue engineering since it decomposes quickly. This article discusses recent research and developments on pectin polysaccharide, including its types, origins, applications, and potential demands for use in AI-mediated scaffolds. It also covers the materials-design process, strategy for implementation to material selection and fabrication methods for evaluation. Finally, we discuss unmet requirements and current obstacles in the development of optimal materials for wound healing and bone-tissue regeneration, as well as emerging strategies in the field.

Characterization of a low-methoxyl pectin extracted from red radish (Raphanus sativus L.) pomace and its gelation induced by NaCl

There is an increasing demand for obtaining pectin from new sources. Red radish (Raphanus sativus L.) pomace pectin extracted by alkali was low-methoxyl pectin with esterification degree of 10.17 %, galacturonic acid content of 69.71 % (wt), and average molar weight of 78.59 kDa. The pectin primarily consisted of rhamnogalacturonan I and homogalacturonan domains. The predominant monosaccharides of the pectin were galacturonic acid (46.32 mol%), arabinose (16.03 mol%), galactose (10.46 mol%), and rhamnose (10.28 mol%), respectively. The red radish pomace pectin solution exhibited a shear-thinning behavior. NaCl could induce gelation of red radish pomace pectin, and the gel properties of red radish pomace pectin were considerably affected by the NaCl concentration. As the NaCl concentration (0.25-0.50 mol/L) increased, the rate of gelation accelerated, and the time to gelation point appeared earlier. There was an optimal NaCl concentration (0.50 mol/L) for the pectin to form a gel with the greatest solid-like properties, gel hardness (33.84 g) and water-holding capacity (62.41 %). Gelation force analysis indicated gel formation mainly caused by electrostatic shielding effect of Na+ and hydrogen bonding. This research could facilitate the applications of the red radish pomace pectin in the realm of edible hydrocolloids.

Alginate Core-Shell Capsules Production through Coextrusion Methods: Principles and Technologies

This paper provides an overview of coextrusion methods for encapsulation. Encapsulation involves the coating or entrapment of a core material such as food ingredients, enzymes, cells, or bioactives. Encapsulation can help compounds add to other matrices, stabilize compounds during storage, or enable controlled delivery. This review explores the principal l coextrusion methods available that can be used to produce core-shell capsules through the use of coaxial nozzles. Four methods for encapsulation by coextrusion are examined in detail, including dripping, jet cutting, centrifugal, and electrohydrodynamic systems. The targeted capsule size determines the appropriate parameters for each method. Coextrusion technology is a promising encapsulation technique able to generate core-shell capsules in a controlled manner, which can be applied to cosmetic, food, pharmaceutical, agriculture, and textile industries. Coextrusion is an excellent way to preserve active molecules and present a significant economic interest.

The effect of biopolymer-water interaction on relaxation phenomena in blackcurrant pectin solutions

Pectin is commonly used food additive. Depends on the source of the acquisition, its properties may vary significantly, therefore pectin obtained from different sources may be used for various purposes. Little information can be found about the properties of blackcurrant pectin. Therefore, the aim of this study was to investigate blackcurrant pectin properties, with particular emphasis on biopolymer behaviour in aqueous solutions. Applied water extraction resulted in a water-soluble fraction of pectin with M_w = 115.75 kg·mol^-1. Aqueous solutions of obtained polysaccharides was tested with various methods (membrane osmometry, DLS, NMR, viscosity tests) that allowed for a comprehensive description of biopolymer-biopolymer and biopolymer-water interactions in both, dilute and semidilute regime. Blackcurrant pectin exhibits behaviour characteristic for polyelectrolytes. The analysis of the obtained results shows that, despite its low molecular weight, obtained pectin has a highly branched structure, which influences strong intermolecular interactions in solutions.

The gelation behavior of thiolated citrus high-methoxyl pectin induced by sodium phosphate dibasic dodecahydrate

The present study found that sodium phosphate dibasic dodecahydrate (Na₂HPO₄) was capable of inducing the gelation of thiolated citrus high-methoxyl pectin (TCHMP). TCHMP was synthesized by amidation of citrus high-methoxyl pectin. The gel formation exhibited an obvious concentration-dependence, including TCHMP and Na₂HPO₄ concentration. For Na₂HPO₄-induced TCHMP gels (TCHMPGs), gel strength and water holding capacity (WHC) increased, while the microcellular network structure was more compact with the increase of TCHMP and Na₂HPO₄ concentration. Dynamic viscoelastic experiment showed when Na₂HPO₄ concentration was more than or equal to 0.5 mol/L, TCHMP sols could be transferred into gels within 30 min. Crystal property was not changed while thermal stability was improved after phase transition. Gelling forces analysis indicated that disulfide bonds were the main interaction forces in TCHMPGs. Consequently, TCHMPGs were covalently crosslinked and exhibited satisfactory gel performance. The results provide a theoretical basis for the formation of gels by Na₂HPO₄ induced TCHMP.

Sustainable blueberry waste recycling towards biorefinery strategy and circular bioeconomy: A review

Waste valorization using biological methods for value addition as well as environmental management is becoming popular approach for sustainable development. The present review addresses the availability of blueberry crop residues (BCR), applications of this feedstock in bioprocess for obtaining range of value-added products, to offer economic viability, business development and market potential, challenges and future perspectives. To the best of our knowledge, this is the first article addressing the blueberry waste valorization for a sustainable circular bioeconomy. Furthermore, it covers the information on the alternative BCR valorization methods and production of biochar for environmental management through removal or mitigation of organic and inorganic pollutants from contaminated sites. The review also discusses the ample opportunities of strategic utilization of BCR to offer solutions for environmental sustenance, covers the emerging trends to produce multi-products and techno-economic prospective for sustainable agronomy.

Characterization of selenized polysaccharides from Ribes nigrum L. and its inhibitory effects on α-amylase and α-glucosidase

The polysaccharide from Ribes nigrum L. (RCP) was modified by nitric acid-sodium selenite method. After purification by Sepharose-6B, high purity native (PRCP) and three selenized polysaccharides (PRSPs) with different selenium contents were obtained. Compared with PRCP, PRSPs possessed the lower molecular weight, better water-solubility, physical stability and rheological properties. FT-IR and NMR spectra confirmed PRSPs had the characteristic absorption peaks of polysaccharides and the glycosidic bond types were not changed after selenylation modification, whereas the selenyl groups existing in PRSPs were mainly introduced at the C-6 position of sugar residue →4)-β-d-Manp-(1→. Moreover, PRSPs displayed obviously smoother and smaller flaky structure than PRCP, and their inhibitory effects on α-amylase and α-glucosidase also were greater than PRCP. PRSPs exhibited a reversible inhibition on two enzymes in competitive manner and quenched their fluorescence through the static quenching mechanism. The polysaccharide-enzyme complex was spontaneously formed mainly driven by the hydrophobic interaction and hydrogen bonding.

Physicochemical and rheological characterization of pectin-rich polysaccharides from Gardenia jasminoides J. Ellis flower

Gardenia (Gardenia jasminoides J. Ellis) is regarded as an edible medicine plant in China. Here, gardenia flower polysaccharide fraction (GFPF) was extracted by water at 90°C and its chemical composition, rheological properties, and antioxidant activities of GFPF were investigated. The GFPF extraction yield was 18.04 ± 1.81% (W/W) and mainly comprised neutral sugars (46.83 ± 3.14%), uronic acid (35.21 ± 0.17%), protein (1.63 ± 0.34%), and total phenol (9.49 ± 0.08 mgGAE/g). Galacturonic acid (41.05 ± 0.59%) was the main monosaccharide, and galactose, glucose, arabinose, rhamnose, xylose, mannose, and glucuronic acid were also detected in GFPF. Its degree of esterification was 32.76 ± 1.52%. FT-IR spectra analysis showed a similar absorption pattern between GFPF and pectin from apple. The results suggested that GFPF was low methoxy pectin. Thermogravimetric analysis and zeta potential analysis indicated that the pectin was stable under high temperature and alkaline condition. Steady rheology showed that the GFPF dispersion was a shear thinned pseudoplastic fluid with high apparent viscosities at concentration above 2%. The degree of pseudoplasticity of the solutions increased with the concentrations increased and the temperatures decreased. DPPH and ABTS free radical scavenging assay indicated that GFPF had relatively high antioxidant activity. The results showed that gardenia flower was rich in pectin polysaccharides with low methoxy pectin. It had high apparent viscosities at concentration above 2% and had good antioxidant activity. The data suggested that GFPF can be a new resource of low methoxy pectin with potential application as thicker or gelling agents in food industry.

Egg-box model-based gelation of alginate and pectin: A review

Alginate and pectin are emblematic natural polyuronates that have been widely used in food, cosmetics and medicine. Ca-dependent gelation is one of their most important functional properties. The gelation mechanisms of alginate and pectin, known as egg-box model, were believed to be basically the same, because their Ca-binding sites show a mirror symmetric conformation. However, studies have found that the formation and the structure of egg-box dimmers between alginate and pectin were different. Very few studies have reviewed those differences. Therefore, this study was proposed to first summarize the intrinsic and extrinsic factors that can influence the gelation of alginate and pectin. The differences in the effect of these factors on the gelation of alginate and pectin were then discussed. Meanwhile, the similarity and difference in their gelation mechanism was also summarized. The knowledge gained in this review would provide useful information for the practical applications of alginate and pectin.