5-hydroxymethylfurfural-embedded poly (vinyl alcohol)/sodium alginate hybrid hydrogels accelerate wound healing

The antisickling agent, 5-hydroxymethyl-2-furfural: Other potential pharmacological applications

For the last two decades, the aromatic aldehyde 5-hydroxymethyl-furfural (5-HMF) has been the subject of several investigations for its pharmacologic potential. In 2004, the Safo group reported that 5-HMF has potent antisickling activity by targeting and ameliorating the primary pathophysiology of hypoxia-induced sickling of erythrocytes (red blood cells [RBC]). Following the encouraging outcome of the preclinical and phase I/II clinical studies of 5-HMF for the treatment of sickle cell disease (SCD), there have been multiple studies suggesting 5-HMF has several other biological or pharmacologic activities, including anti-allergic, antioxidant, anti-hypoxic, anti-ischemic, cognitive improvement, anti-tyrosinase, anti-proliferation, cytoprotective, and anti-inflammatory activities. The wide range of its effects makes 5-HMF a potential candidate for treating a variety of diseases including cognitive disorders, gout, allergic disorders, anemia, hypoxia, cancers, ischemia, hemorrhagic shock, liver fibrosis, and oxidative injury. Several of these therapeutic claims are currently under investigation and, while promising, vary in terms of the strength of their evidence. This review presents the research regarding the therapeutic potential of 5-HMF in addition to its sources, physicochemical properties, safety, absorption, distribution, metabolism, and excretion (ADME) profiles.

Composite Hydrogel of Poly(vinyl alcohol) Loaded by Citrus hystrix Leaf Extract, Chitosan, and Sodium Alginate with In Vitro Antibacterial and Release Test

Citrus hystrix leaves have been used traditionally as a spice, a traditional medicine for respiratory and digestive disorders, and a remedy for bacterial infections. This study reports on the synthesis of composite hydrogels using the freeze-thaw method with poly(vinyl alcohol) (PVA) as the building block loaded by C. hystrix leaf extract (CHLE). Additionally, chitosan (CS) and sodium alginate (SA) were also loaded, respectively, to increase the antibacterial activity and to control the extract release of the composite hydrogels. The combinations of the compositions were PVA, PVA/CHLE, PVA/CHLE/CS, PVA/CHLE/SA, and PVA/CHLE/SA/CS. The internal morphology of the hydrogels shows some changes after the PVA/CHLE hydrogel was loaded by CS, SA, and SA/CS. The analysis of the Fourier transform infrared (FTIR) spectra confirmed the presence of PVA, CHLE, CS, and SA in the composite hydrogels. From the X-ray diffraction (XRD) characterization, it was shown that the composite hydrogels maintained their semicrystalline properties with decreasing crystallinity degree after being loaded by CS, SA, and SA/CS, as also supported by differential scanning calorimetry (DSC) characterization. The compressive strength of the PVA/CHLE hydrogel decreases after the loading of CS, SA, and SA/CS, so that it becomes more elastic. Despite being loaded in the composite hydrogels, the CHLE retained its antibacterial activity, as evidenced in the in vitro antibacterial test. The loading of CS succeeded in increasing the antibacterial activity of the composite hydrogels, while the loading of SA resulted in the decrease of the antibacterial activity. The release of extract from the composite hydrogels was successfully slowed down after the loading of CS, SA, and SA/CS, resulting in a controlled release following the pseudo-Fickian diffusion. The cytotoxic activity test proved that all hydrogel samples can be used safely on normal cells up to concentrations above 1000 μg/mL.

Enzyme-mediated fabrication of nanocomposite hydrogel microneedles for tunable mechanical strength and controllable transdermal efficiency

Microneedles (MNs) are increasingly used in transdermal drug delivery due to high bioavailability, simple operation, and improved patient compliance. However, further clinical applications are hindered by unsatisfactory mechanical strength and uncontrolled drug release. Herein, an enzyme-mediated approach is reported for the fabrication of nanocomposite hydrogel-based MNs with tunable mechanical strength and controllable transdermal efficiency. As a proof-of-concept, tetrakis(1-methyl-4-pyridinio)porphyrin (TMPyP) was chosen as a model drug for photodynamic therapy of melanoma. TMPyP-loaded PLGA nanoparticles (NP/TMPyP) served as an inner phase of MNs for controlled release of photosensitizers, and enzyme-mediated hyaluronic acid-tyramine (HAT) hydrogels served as an external phase for optimizing the mechanical strength of MNs. By changing the concentration of HRP and H2O2, three types of MNs were fabricated for transdermal delivery of TMPyP, which demonstrated different cross-linking densities and various mechanical strength. Among the three MNs, the HAT-Medium@NP/TMPyP-MN with a medium mechanical strength exhibited the highest values of transdermal efficiency in vitro and the longest retention time in vivo. As compared to pure TMPyP and TMPyP-loaded nanoparticles, the HAT-Medium@NP/TMPyP-MN demonstrated higher anticancer efficacy in both melanoma A375 cells and a xenografted tumor mouse model. Therefore, the enzyme-mediated nanocomposite hydrogel MNs show great promise in the transdermal delivery of therapeutic drugs with enhanced performance. STATEMENT OF SIGNIFICANCE: This study reports an enzyme-mediated approach for the fabrication of photodynamically-active microneedles (HAT@NP/TMPyP-MNs) with tunable mechanical strength and controllable transdermal efficiency. On one hand, HAT hydrogels that bear different cross-linking densities, facilitate tunable mechanical strength and optimized transdermal performances of MNs; on the other hand, NP/TMPyP and HAT network contribute to sustained release of photosensitizers. Comparing to other formulation (i.e., NP/TMPyP or TMPyP), the HAT-Medium@NP/TMPyP-MN exhibited excelling anticancer efficacy in photodynamic therapy in vitro and in vivo. We believe that the combination of enzyme-mediated polymeric cross-linking and slow-releasing nano-vehicles in a single nanocomposite platform provides a versatile approach for the fabrication of MNs with enhanced therapeutic efficacy, which holds great promise in the transdermal delivery of various therapeutic drugs in future.

Marine-derived polysaccharides and their therapeutic potential in wound healing application - A review

Polysaccharides originating from marine sources have been studied as potential material for use in wound dressings because of their desirable characteristics of biocompatibility, biodegradability, and low toxicity. Marine-derived polysaccharides used as wound dressing, provide several benefits such as promoting wound healing by providing a moist environment that facilitates cell migration and proliferation. They can also act as a barrier against external contaminants and provide a protective layer to prevent further damage to the wound. Research studies have shown that marine-derived polysaccharides can be used to develop different types of wound dressings such as hydrogels, films, and fibres. These dressings can be personalised to meet specific requirements based on the type and severity of the wound. For instance, hydrogels can be used for deep wounds to provide a moist environment, while films can be used for superficial wounds to provide a protective barrier. Additionally, these polysaccharides can be modified to improve their properties, such as enhancing their mechanical strength or increasing their ability to release bioactive molecules that can promote wound healing. Overall, marine-derived polysaccharides show great promise for developing effective and safe wound dressings for various wound types.

Multifunctional and theranostic hydrogels for wound healing acceleration: An emphasis on diabetic-related chronic wounds

Hydrogels represent intricate three-dimensional polymeric structures, renowned for their compatibility with living systems and their ability to naturally degrade. These networks stand as promising and viable foundations for a range of biomedical uses. The practical feasibility of employing hydrogels in clinical trials has been well-demonstrated. Among the prevalent biomedical uses of hydrogels, a significant application arises in the context of wound healing. This intricate progression involves distinct phases of inflammation, proliferation, and remodeling, often triggered by trauma, skin injuries, and various diseases. Metabolic conditions like diabetes have the potential to give rise to persistent wounds, leading to delayed healing processes. This current review consolidates a collection of experiments focused on the utilization of hydrogels to expedite the recovery of wounds. Hydrogels have the capacity to improve the inflammatory conditions at the wound site, and they achieve this by diminishing levels of reactive oxygen species (ROS), thereby exhibiting antioxidant effects. Hydrogels have the potential to enhance the growth of fibroblasts and keratinocytes at the wound site. They also possess the capability to inhibit both Gram-positive and Gram-negative bacteria, effectively managing wounds infected by drug-resistant bacteria. Hydrogels can trigger angiogenesis and neovascularization processes, while also promoting the M2 polarization of macrophages, which in turn mitigates inflammation at the wound site. Intelligent and versatile hydrogels, encompassing features such as pH sensitivity, reactivity to reactive oxygen species (ROS), and responsiveness to light and temperature, have proven advantageous in expediting wound healing. Furthermore, hydrogels synthesized using environmentally friendly methods, characterized by high levels of biocompatibility and biodegradability, hold the potential for enhancing the wound healing process. Hydrogels can facilitate the controlled discharge of bioactive substances. More recently, there has been progress in the creation of conductive hydrogels, which, when subjected to electrical stimulation, contribute to the enhancement of wound healing. Diabetes mellitus, a metabolic disorder, leads to a slowdown in the wound healing process, often resulting in the formation of persistent wounds. Hydrogels have the capability to expedite the healing of diabetic wounds, facilitating the transition from the inflammatory phase to the proliferative stage. The current review sheds light on the biological functionalities of hydrogels, encompassing their role in modulating diverse mechanisms and cell types, including inflammation, oxidative stress, macrophages, and bacteriology. Additionally, this review emphasizes the significance of smart hydrogels with responsiveness to external stimuli, as well as conductive hydrogels for promoting wound healing. Lastly, the discussion delves into the advancement of environmentally friendly hydrogels with high biocompatibility, aimed at accelerating the wound healing process.

Functional hydrogel-based wound dressings: A review on biocompatibility and therapeutic efficacy

Chronic wounds, burns, and surgical incisions represent critical healthcare challenges that significantly impact patient quality of life and strain healthcare resources. In response to these pressing needs, the field of wound healing has witnessed a radical advancement with the emergence of functional hydrogel-based dressings. This review article underscores the severity and importance of this transformative study in the domain of wound healing. The hydrogel matrix offers a moist and supportive environment that facilitates cellular migration, proliferation, and tissue regeneration, vital for efficient wound closure. Their conformable nature ensures patient comfort, reducing pain and uneasiness during dressing changes, particularly in chronic wounds where frequent interventions are required. Beyond their structural merits, functional hydrogel dressings possess the capability of incorporating bioactive molecules such as growth factors and antimicrobial agents. This facilitates targeted and sustained delivery of therapeutics directly to the wound site, addressing the multifactorial nature of chronic wounds and enhancing the healing trajectory. The integration of advanced nanotechnology has propelled the design of hydrogel dressings with enhanced mechanical strength and controlled drug release profiles, amplifying their therapeutic potential. In conclusion, the significance of this study lies in its ability to revolutionize wound healing practices and positively impact the lives of countless individuals suffering from chronic wounds and burns. As this transformative technology gains momentum, it holds the promise of addressing a major healthcare burden worldwide, thus heralding a new era in wound care management.

Rg3-loaded P407/CS/HA hydrogel inhibits UVB-induced oxidative stress, inflammation and apoptosis in HaCaT cells

UVB radiation can damage human skin, whereas Ginsenoside Rg3, the active ingredient in red ginseng that is processed from ginseng (Panax ginseng C.A. Meyer), could inhibit UVB induced cell damage through anti-oxidation. Meanwhile, P407/CS/HA hydrogel has significant biomedical applications as carriers of drugs. However, the beneficial effects of Rg3-loaded hydrogel (Rg3-Gel) on human HaCaT keratinocytes induced by UVB have rarely been reported. In our study, Rg3 was loaded into hydrogel and the effect of Rg3-Gel against UVB‑induced Hacat cells damages was determined by measuring its ability to alleviate UVB‑induced elevation of oxidative stress, pro-inflammatory and apoptotic response. We found that the treatment with Rg3-Gel inhibited the generation of intracellular ROS and MDA and upregulated the expression of antioxidant enzymes SOD and GSH-Px which were inhibited by UVB exposure. Increased levels of pro-inflammatory cytokines TNF‑α, COX‑2, iNOS and IL‑1β following UVB irradiation were suppressed by the introduction of Rg3-Gel. Additionally, the level of Bcl-2 was decreased and the expression of Bax and Caspase3 were enhanced by Rg3-Gel treatment. In conclusion, Rg3-Gel equipped with the synergistic effect of Rg3 and hydrogel has an effective inhibitory effect on UVB-induced oxidative stress, inflammatory and apoptosis.

A Review of Metal Nanoparticles Embedded in Hydrogel Scaffolds for Wound Healing In Vivo

An evolving field, nanotechnology has made its mark in the fields of nanoscience, nanoparticles, nanomaterials, and nanomedicine. Specifically, metal nanoparticles have garnered attention for their diverse use and applicability to dressings for wound healing due to their antimicrobial properties. Given their convenient integration into wound dressings, there has been increasing focus dedicated to investigating the physical, mechanical, and biological characteristics of these nanoparticles as well as their incorporation into biocomposite materials, such as hydrogel scaffolds for use in lieu of antibiotics as well as to accelerate and ameliorate healing. Though rigorously tested and applied in both medical and non-medical applications, further investigations have not been carried out to bring metal nanoparticle-hydrogel composites into clinical practice. In this review, we provide an up-to-date, comprehensive review of advancements in the field, with emphasis on implications on wound healing in in vivo experiments.

Polymer-Based Hydrogel Loaded with Honey in Drug Delivery System for Wound Healing Applications

Excellent wound dressings should have crucial components, including high porosity, non-toxicity, high water absorption, and the ability to retain a humid environment in the wound area and facilitate wound healing. Unfortunately, current wound dressings hamper the healing process, with poor antibacterial, anti-inflammatory, and antioxidant activity, frequent dressing changes, low biodegradability, and poor mechanical properties. Hydrogels are crosslinked polymer chains with three-dimensional (3D) networks that have been applicable as wound dressings. They could retain a humid environment on the wound site, provide a protective barrier against pathogenic infections, and provide pain relief. Hydrogel can be obtained from natural, synthetic, or hybrid polymers. Honey is a natural substance that has demonstrated several therapeutic efficacies, including anti-inflammatory, antibacterial, and antioxidant activity, which makes it beneficial for wound treatment. Honey-based hydrogel wound dressings demonstrated excellent characteristics, including good biodegradability and biocompatibility, stimulated cell proliferation and reepithelization, inhibited bacterial growth, and accelerated wound healing. This review aimed to demonstrate the potential of honey-based hydrogel in wound healing applications and complement the studies accessible regarding implementing honey-based hydrogel dressing for wound healing.

Alginate-Based Materials Loaded with Nanoparticles in Wound Healing

Alginate is a naturally derived polysaccharide widely applied in drug delivery, as well as regenerative medicine, tissue engineering and wound care. Due to its excellent biocompatibility, low toxicity, and the ability to absorb a high amount of exudate, it is widely used in modern wound dressings. Numerous studies indicate that alginate applied in wound care can be enhanced with the incorporation of nanoparticles, revealing additional properties beneficial in the healing process. Among the most extensively explored materials, composite dressings with alginate loaded with antimicrobial inorganic nanoparticles can be mentioned. However, other types of nanoparticles with antibiotics, growth factors, and other active ingredients are also investigated. This review article focuses on the most recent findings regarding novel alginate-based materials loaded with nanoparticles and their applicability as wound dressings, with special attention paid to the materials of potential use in the treatment of chronic wounds.

Antioxidant Biomaterials in Cutaneous Wound Healing and Tissue Regeneration: A Critical Review

Natural-based biomaterials play an important role in developing new products for medical applications, primarily in cutaneous injuries. A large panel of biomaterials with antioxidant properties has revealed an advancement in supporting and expediting tissue regeneration. However, their low bioavailability in preventing cellular oxidative stress through the delivery system limits their therapeutic activity at the injury site. The integration of antioxidant compounds in the implanted biomaterial should be able to maintain their antioxidant activity while facilitating skin tissue recovery. This review summarises the recent literature that reported the role of natural antioxidant-incorporated biomaterials in promoting skin wound healing and tissue regeneration, which is supported by evidence from in vitro, in vivo, and clinical studies. Antioxidant-based therapies for wound healing have shown promising evidence in numerous animal studies, even though clinical studies remain very limited. We also described the underlying mechanism of reactive oxygen species (ROS) generation and provided a comprehensive review of ROS-scavenging biomaterials found in the literature in the last six years.

Nanomaterials-Based Wound Dressing for Advanced Management of Infected Wound

The effective prevention and treatment of bacterial infections is imperative to wound repair and the improvement of patient outcomes. In recent years, nanomaterials have been extensively applied in infection control and wound healing due to their special physiochemical and biological properties. Incorporating antibacterial nanomaterials into wound dressing has been associated with improved biosafety and enhanced treatment outcomes compared to naked nanomaterials. In this review, we discuss progress in the application of nanomaterial-based wound dressings for advanced management of infected wounds. Focus is given to antibacterial therapy as well as the all-in-one detection and treatment of bacterial infections. Notably, we highlight progress in the use of nanoparticles with intrinsic antibacterial performances, such as metals and metal oxide nanoparticles that are capable of killing bacteria and reducing the drug-resistance of bacteria through multiple antimicrobial mechanisms. In addition, we discuss nanomaterials that have been proven to be ideal drug carriers for the delivery and release of antimicrobials either in passive or in stimuli-responsive manners. Focus is given to nanomaterials with the ability to kill bacteria based on the photo-triggered heat (photothermal therapy) or ROS (photodynamic therapy), due to their unparalleled advantages in infection control. Moreover, we highlight examples of intelligent nanomaterial-based wound dressings that can detect bacterial infections in-situ while providing timely antibacterial therapy for enhanced management of infected wounds. Finally, we highlight challenges associated with the current nanomaterial-based wound dressings and provide further perspectives for future improvement of wound healing.

Occurrence of Furfural and Its Derivatives in Coffee Products in China and Estimation of Dietary Intake

This is the first report on the content of furfural and its derivatives in coffee products in China. The concentrations of furfural and its derivatives in 449 sampled, commercially available coffee products in China were analyzed through a GC-MS technique, and the associated health risks were estimated. As a result, 5-hydroxymethyl furfural (5-HMF) was identified as the predominant derivative compound, with the highest concentration of 6035.0 mg/kg and detection frequency of 98.7%. The mean dietary exposures of 5-HMF, 5-MF(5-methylfurfural), and 2-F(2-furfural) in coffee products among Chinese consumers were 55.65, 3.00, and 3.23 μg/kg bw/day, respectively. The ranges of mean dietary intake of furfural and its derivatives based on age groups were all lower than the acceptable daily intake (ADI) and the toxicological concern threshold (TTC). Risk evaluation results indicate that coffee product intake did not pose potential risks to consumers. Notably, the analysis revealed that children aged 3-6 years had the highest mean exposure due to their low body weight.

Hybrid-Based Wound Dressings: Combination of Synthetic and Biopolymers

Most commercialized wound dressings are polymer-based. Synthetic and natural polymers have been utilized widely for the development of wound dressings. However, the use of natural polymers is limited by their poor mechanical properties, resulting in their combination with synthetic polymers and other materials to enhance their mechanical properties. Natural polymers are mostly affordable, biocompatible, and biodegradable with promising antimicrobial activity. They have been further tailored into unique hybrid wound dressings when combined with synthetic polymers and selected biomaterials. Some important features required in an ideal wound dressing include the capability to prevent bacteria invasion, reduce odor, absorb exudates, be comfortable, facilitate easy application and removal as well as frequent changing, prevent further skin tear and irritation when applied or removed, and provide a moist environment and soothing effect, be permeable to gases, etc. The efficacy of polymers in the design of wound dressings cannot be overemphasized. This review article reports the efficacy of wound dressings prepared from a combination of synthetic and natural polymers.

An Overview on the Recent Advances in the Treatment of Infected Wounds: Antibacterial Wound Dressings

A wound can be surgical, cuts from an operation or due to accident and trauma. The infected wound, as a result of bacteria growth within the damaged skin, interrupts the natural wound healing process and significantly impacts the quality of life. Wound dressing is an important segment of the skincare industry with its economic burden estimated at $ 20.4 billion (in 2021) in the global market. The results of recent clinical trials suggest that the use of modern dressings can be the easiest, most accessible, and most cost-effective way to treat chronic wounds and, hence, holds significant promise. With the sheer number of dressings in the market, the selection of correct dressing is confusing for clinicians and healthcare workers. The aim of this research was to review widely used types of antibacterial wound dressings, as well as emerging products, for their efficiency and mode of action. In this review, we focus on introducing antibiotics and antibacterial nanoparticles as two important and clinically widely used categories of antibacterial agents. The perspectives and challenges for paving the way for future research in this field are also discussed. This article is protected by copyright. All rights reserved.

The Effect of Eurycoma longifolia Jack Tongkat Ali Hydrogel on Wound Contraction and Re-Epithelialization in In Vivo Excisional Wound Model

BACKGROUND: Wound management is one of the significant health problems throughout the world. Medicinal plants have been used widely in wound management. Eurycoma longifolia Jack which is known as Tongkat Ali (TA) is a tropical medicinal plant in South East Asian countries. AIM: The aim of the study was to investigate the effect of (TA) hydrogel on wound contraction and re-epithelialization in excisional wound model in rats. METHODS: Twenty male Sprague Dawley rats were divided into four groups each group contained five rats (n = 5). Animal treatment groups are formed as: Untreated (−ve) control, Hydrocyn® aqua gel (+ve), vehicle hydrogel, and (TA) hydrogel. A full-thickness circular excisional wound was created on the dorsal back of each rat. The wounded area was measured and photographed on days 3, 6, 9, 12, 15, and 18 post wounding to determine the percentage of wound contraction and re-epithelialization. RESULTS: (TA) hydrogel showed significant increase in the percentage of wound contraction by 43.38% compared with the other groups (p = 0.032, p < 0.050) during the first interval (inflammatory phase). Although in the later healing stages (proliferative and remodeling) and re-epithelialization, our test group (TA) hydrogel did not show statistically difference with the other groups yet it was comparable to medically certified wound healing agent. CONCLUSION: (TA) hydrogel significantly accelerated the wound healing process during the early stage, the inflammatory stage. Whereas during the later healing stages and re-epithelialization, it showed almost the same effect of Hydrocyn® aqua gel.

Nanomaterial-Based Therapy for Wound Healing

Poor wound healing affects millions of people globally, resulting in increased mortality rates and associated expenses. The three major complications associated with wounds are: (i) the lack of an appropriate environment to enable the cell migration, proliferation, and angiogenesis; (ii) the microbial infection; (iii) unstable and protracted inflammation. Unfortunately, existing therapeutic methods have not solved these primary problems completely, and, thus, they have an inadequate medical accomplishment. Over the years, the integration of the remarkable properties of nanomaterials into wound healing has produced significant results. Nanomaterials can stimulate numerous cellular and molecular processes that aid in the wound microenvironment via antimicrobial, anti-inflammatory, and angiogenic effects, possibly changing the milieu from nonhealing to healing. The present article highlights the mechanism and pathophysiology of wound healing. Further, it discusses the current findings concerning the prospects and challenges of nanomaterial usage in the management of chronic wounds.

Antimicrobial Lignin-Based Polyurethane/Ag Composite Foams for Improving Wound Healing

Antimicrobial materials are an urgent need for modern wound care in the clinic. Although traditional polyurethane foams have proven to be clinically valuable for wound treatment, their petroleum-originated preparation and bioinert nature have restricted their efficacy in biomedical applications. Here, we propose a simple one-step foaming method to prepare lignin-based polyurethane foams (LPUFs) in which fully biobased polyether polyols partially replace traditional petroleum-based raw materials. The trace amount of phenolic hydroxyl groups (about 4 mmol) in liquefied lignin acts as a direct reducing agent and capping agent to silver ions (less than 0.3 mmol), in situ forming silver nanoparticles (Ag NPs) within the LPUF skeleton. This newly proposed lignin polyurethane/Ag composite foam (named as Ag NP-LPUF) shows improved mechanical, thermal, and antibacterial properties. It is worth mentioning that the Ag NP-LPUF exhibits more than 99% antibacterial rate against Escherichia coli within 1 h and Staphylococcus aureus within 4 h. Evaluations in mice indicate that the antimicrobial composite foams can effectively promote wound healing of full-thickness skin defects. As a proof of concept, this antibacterial and biodegradable foam exhibits significant potential for clinical translation in wound care dressings.

Preventive Efficiency of Chelidonium majus Ethanolic Extract Against Aflatoxin B1 Induced Neurochemical Deteriorations in Rats

&lt;b&gt;Background and Objective:&lt;/b&gt; Aflatoxins affect many species including humans and animals, therefore the present study was designed to investigate the protective effect of &lt;i&gt;Chelidonium majus&lt;/i&gt; Ethanolic Extract (CMEE) on neurotoxicity induced by Aflatoxin B&lt;sub&gt;1&lt;/sub&gt; (AFB1) in rats. &lt;b&gt;Materials and Methods:&lt;/b&gt; Four groups of male Albino rats were treated orally for 28 days as follows: (1) Control group was daily given DMSO-PBS buffer (1.0 mL per rat), (2) CMEE (300 mg kg&lt;sup&gt;1&lt;/sup&gt;/day) dissolved in DMSO-PBS buffer, (3) AFB1 (80 μg kg&lt;sup&gt;1&lt;/sup&gt;/day) dissolved in DMSO-PBS buffer and (4) Received daily AFB1 (300 mg kg&lt;sup&gt;1&lt;/sup&gt;) in combination with CMEE (300 mg kg&lt;sup&gt;1&lt;/sup&gt;). &lt;b&gt;Results:&lt;/b&gt; CMEE exhibits antioxidant activity &lt;i&gt;in vitro&lt;/i&gt; and neuroameliorative efficiency &lt;i&gt;in vivo&lt;/i&gt; as its administration in combination with AFB1 succeeded significantly in down regulating the elevated levels of inflammatory and apoptotic markers and restoring the values of neurochemical markers (AChE-ase, dopamine and serotonin) that were deteriorated by AFB1 intake. &lt;b&gt;Conclusion:&lt;/b&gt; In conclusion, the neuroprotective effect of CMEE may be mediated through its antioxidant and free radical scavenging activity that proved from the data&lt;i&gt; &lt;/i&gt;of ferric-reducing power ability and DPPH radical scavenging activity.

Marine Polysaccharides for Wound Dressings Application: An Overview

Wound dressings have become a crucial treatment for wound healing due to their convenience, low cost, and prolonged wound management. As cutting-edge biomaterials, marine polysaccharides are divided from most marine organisms. It possesses various bioactivities, which allowing them to be processed into various forms of wound dressings. Therefore, a comprehensive understanding of the application of marine polysaccharides in wound dressings is particularly important for the studies of wound therapy. In this review, we first introduce the wound healing process and describe the characteristics of modern commonly used dressings. Then, the properties of various marine polysaccharides and their application in wound dressing development are outlined. Finally, strategies for developing and enhancing marine polysaccharide wound dressings are described, and an outlook of these dressings is given. The diverse bioactivities of marine polysaccharides including antibacterial, anti-inflammatory, haemostatic properties, etc., providing excellent wound management and accelerate wound healing. Meanwhile, these biomaterials have higher biocompatibility and biodegradability compared to synthetic ones. On the other hand, marine polysaccharides can be combined with copolymers and active substances to prepare various forms of dressings. Among them, emerging types of dressings such as nanofibers, smart hydrogels and injectable hydrogels are at the research frontier of their development. Therefore, marine polysaccharides are essential materials in wound dressings fabrication and have a promising future.

Polymeric Hydrogel Scaffolds: Skin Tissue Engineering and Regeneration

Tissue engineering is a novel regenerative approach in the medicinal field that promises the regeneration of damaged tissues. Moreover, tissue engineering involves synthetic and natural biomaterials that facilitate tissue or organ growth outside the body. Not surprisingly, the demand for polymer-based therapeutical approaches in skin tissue defects has increased at an effective rate, despite the pressing clinical need. Among the 3D scaffolds for tissue engineering and regeneration approaches, hydrogel scaffolds have shown significant importance for their use as 3D cross-linked scaffolds in skin tissue regeneration due to their ideal moisture retention property and porosity biocompatibility, biodegradable, and biomimetic characteristics. In this review, we demonstrated the choice of ideal biomaterials to fabricate the novel hydrogel scaffolds for skin tissue engineering. After a short introduction to the bioactive and drug-loaded polymeric hydrogels, the discussion turns to fabrication and characterisation techniques of the polymeric hydrogel scaffolds. In conclusion, we discuss the excellent wound healing potential of stem cell-loaded hydrogels and Nano-based approaches to designing hydrogel scaffolds for skin tissue engineering.

Injectable self-healing bioactive antioxidative one-component poly(salicylic acid) hydrogel with strong ultraviolet-shielding for preventing skin light injury

The design and development of one-component temperature-sensitive bioactive hydrogel with multifunctional properties for protecting skin against light injury remain a challenge. Herein, we report a bioactive multifunctional poly(salicylic acid)-F127-poly(salicylic acid) copolymer hydrogel (FPSa) with one-component for potential skin protection applications. The FPSa hydrogel possesses the thermosensitivity (23 °C), injectability, self-healing ability, ultraviolet shielding (shielding the wavelength between 280 and 370 nm), and antioxidation activity (above 70%), and also showed the good cytocompatibility (cell survival rate >90% and hemolysis rate less than 5%) and biodegradability (90% weight loss at 3 days). The in vivo animal model showed that FPSa hydrogel could effectively protect the skin tissue and prevent the ultraviolet induced injury. This study can provide a strategy to design multifunctional bioactive hydrogel with simple composition for disease therapy and regenerative medicine.

Antibacterial Effect of Copper Sulfide Nanoparticles on Infected Wound Healing

Background: It is widely acknowledged that pathogenic germs delay wound healing to some extent. To explore factors influencing the wound healing process, the current study was conducted to evaluate the antibacterial effect of topical application of copper sulfide nanoparticles (CuS NPs) in vitro and on infected wound healing process in the rat model. Materials and Methods: In this study, the morphology and size of CuS NPs were detected. Staphylococcus aureus and Escherichia coli were used so that the antibacterial ability of CuS NPs could be evaluated better. In addition, a 2-cm circular full-thickness wound infected with a solution of 10⁷ colony forming units (CFU) Staphylococcus aureus was created on the back of each rat. The rats were divided into four groups including the control group, the 100 mcg/mL CuS NPs group, the 250 mcg/mL CuS NPs group, and the 500 mcg/mL CuS NPs group. Tissue bacterial count and histologic assessment were evaluated. Results: The results indicated that CuS NPs had antibacterial activity against Staphylococcus aureus and Escherichia coli. Moreover, they could decrease the incidence of bacterial colonization and promote wound healing through re-epithelialization and collagen deposition. Furthermore, CuS NPs could maintain Cu²⁺ continuous release and inhibit the viability of Staphylococcus aureus through lipid peroxidation. Conclusions: This study found that CuS NPs have fine antibacterial properties, and particularly, the 500 mcg/mL CuS NPs had better effects, without increase of side effects. They could promote infected wound healing, the prospective clinical application of which was further confirmed in the treatment of wound infection.

Berberine carried gelatin/sodium alginate hydrogels with antibacterial and EDTA-induced detachment performances

Most existing hydrogel wound dressings lack gentle detachment property. In this work, novel hydrogels with anti-bacterial and induced detachment properties were prepared. Both gelatin (G) and sodium alginate (SA) are natural polymer materials. The G/SA hydrogels were prepared by dual cross-linking. The addition of SA significantly improves the mechanical properties of composite hydrogels. The tensile modulus and elongation at break of the G/SA hydrogels with 2.0% SA could reach 99.23 ± 2.18 kPa and 85.47 ± 5.01%, respectively. In addition, the interconnected porous network and high swelling ratio (over 9.99 ± 0.33) are beneficial to the transmission of oxygen and absorption of exudates to accelerate the healing of wound. Subsequently, berberine (BBR) was loaded into the G/SA hydrogels. The BBR/G/SA hydrogels show sustained drug release for 168 h and exhibit anti-bacterial effect against Staphylococcus aureus. The results of L929 cells cultured with the hydrogel extracts indicate good biocompatibility. Finally, results of EDTA-induced detachment performances demonstrate that the hydrogels could be removed from the wound as the internal structure destroyed. All illustrated results above demonstrated the BBR carried G/SA hydrogels have potential used as wound dressing materials in future.

Ag@MOF-loaded chitosan nanoparticle and polyvinyl alcohol/sodium alginate/chitosan bilayer dressing for wound healing applications

In this paper, Ag-Metal-organic framework loaded chitosan nanoparticles (0.1%Ag@MOF/1.5%CSNPs) and polyvinyl alcohol/sodium alginate/chitosan (PACS) were used as the upper and lower layers to successfully prepare a bilayer composite dressing for wound healing. The performance of bilayer dressing was evaluated. The lower layer (PACS) had uniform pore size distribution, good water retention, swelling, water vapor permeability, and biocompatibility while PACS had almost no antibacterial activity. The upper layer (Ag@MOF/CSNPs) possessed excellent antibacterial activity and poor biocompatibility. As the upper layer, it can avoid direct contact with the skin and inhibit microbial invasion. In addition, the bilayer can adhere to a large number of red blood cells and platelets, promoting blood coagulation and cell proliferation. Ag@MOF, CSNPs, Ag@MOF/CSNPs and bilayer showed antibacterial activity in ascending order, due to the synergistic antibacterial action of the upper and lower layer. In vivo evaluation showed that both bilayer and PACS could significantly accelerate the wound healing, and the bilayer dressing showed more complete re-epithelialization with less inflammatory cells. In summary, this new bilayer composite is an ideal dressing for accelerating wound healing.

Advanced SA/PVA-based hydrogel matrices with prolonged release of Aloe vera as promising wound dressings

This work focuses on the influence of different amounts (5, 10, 15, 20 and 25%, v/v) of solution of Aloe vera on the chemical structure and properties of sodium alginate/poly(vinyl alcohol) hydrogel films. The polymeric matrix was prepared following the chemical cross-linking method using poly(ethylene glycol) diacrylate (PEGDA, Mn = 700 g/mol) as a cross-linking agent. First, the gel fractions of the modified hydrogels were determined and their swelling behavior in distilled water and phosphate-buffered saline (PBS) was tested. Subsequently, the following properties of the modified hydrogel materials were studied: structural (FT-IR spectra analysis), morphological (SEM analysis) and mechanical (tensile strength, elongation at break and hardness). Moreover, a thermal analysis (TG/DTG and DSC) confirmed that the SA/PVA hydrogels containing Aloe vera exhibited slightly higher thermal stability than the unmodified hydrogels, which allows concluding that a rigid and thermally stable three-dimensional structure had been obtained. Additionally, the release profile of polysaccharides from the hydrogel matrix was evaluated in PBS at 37 °C. The results show that the active substance was released in a prolonged manner, gradually, even for a week. It was found that the presence of Aloe vera inside the cross-linked polymeric network improved the active substance delivery properties of the hydrogel films. When greater amounts of Aloe vera were applied, the hydrogel had an irregular surface structure, as revealed by SEM images. The chemical structure was confirmed on the basis of an FT-IR spectral analysis. Concluding, SA/PVA/Aloe vera matrices are promising compounds and deserve further studies towards application in interactive wound dressings. Additionally, the cytotoxicity of the materials was studied and the results indicated good adhesion properties and no toxicity. In vitro experiments performed on normal human dermal fibroblasts proved excellent cell attachment on the Aloe vera hydrogel discs, which promoted cells spreading and proliferation.

Alginate: From Food Industry to Biomedical Applications and Management of Metabolic Disorders

Initially used extensively as an additive and ingredient in the food industry, alginate has become an important compound for a wide range of industries and applications, such as the medical, pharmaceutical and cosmetics sectors. In the food industry, alginate has been used to coat fruits and vegetables, as a microbial and viral protection product, and as a gelling, thickening, stabilizing or emulsifying agent. Its biocompatibility, biodegradability, nontoxicity and the possibility of it being used in quantum satis doses prompted scientists to explore new properties for alginate usage. Thus, the use of alginate has been expanded so as to be directed towards the pharmaceutical and biomedical industries, where studies have shown that it can be used successfully as biomaterial for wound, hydrogel, and aerogel dressings, among others. Furthermore, the ability to encapsulate natural substances has led to the possibility of using alginate as a drug coating and drug delivery agent, including the encapsulation of probiotics. This is important considering the fact that, until recently, encapsulation and coating agents used in the pharmaceutical industry were limited to the use of lactose, a potentially allergenic agent or gelatin. Obtained at a relatively low cost from marine brown algae, this hydrocolloid can also be used as a potential tool in the management of diabetes, not only as an insulin delivery agent but also due to its ability to improve insulin resistance, attenuate chronic inflammation and decrease oxidative stress. In addition, alginate has been recognized as a potential weight loss treatment, as alginate supplementation has been used as an adjunct treatment to energy restriction, to enhance satiety and improve weight loss in obese individuals. Thus, alginate holds the promise of an effective product used in the food industry as well as in the management of metabolic disorders such as diabetes and obesity. This review highlights recent research advances on the characteristics of alginate and brings to the forefront the beneficial aspects of using alginate, from the food industry to the biomedical field.

Advances and trends of hydrogel therapy platform in localized tumor treatment: A review

Due to limitations of treatment and the stubbornness of infiltrative tumor cells, the outcome of conventional antitumor treatment is often compromised by a variety of factors, including severe side effects, unexpected recurrence, and massive tissue loss during the treatment. Hydrogel-based therapy is becoming a promising option of cancer treatment, because of its controllability, biocompatibility, high drug loading, prolonged drug release, and specific stimuli-sensitivity. Hydrogel-based therapy has good malleability and can reach some areas that cannot be easily touched by surgeons. Furthermore, hydrogel can be used not only as a carrier for tumor treatment agents, but also as a scaffold for tissue repair. In this review, we presented the latest researches in hydrogel applications of localized tumor therapy and highlighted the recent progress of hydrogel-based therapy in preventing postoperative tumor recurrence and improving tissue repair, thus proposing a new trend of hydrogel-based technology in localized tumor therapy. And this review aims to provide a novel reference and inspire thoughts for a more accurate and individualized cancer treatment.

Alginate hydrogel dressings for advanced wound management

Wound healing is a complicated and continuous process affected by several factors, and it needs an appropriate surrounding to achieve accelerated healing. At present, various wound dressings are used for wound management, such as fiber, sponge, hydrogel, foam, hydrocolloid and so on. Hydrogels can provide mechanical support and moist environment for wounds, and are widely used in biomedical field. Alginate is a natural linear polysaccharide derived from brown algae or bacteria, consisting of repeating units of β-1,4-linked D-mannuronic acid (M) and L-guluronic acid (G) in different ratios. It is widely used in biomedical and engineering fields due to its good biocompatibility and liquid absorption capacity. Alginate-based hydrogels have been used in wound dressing, tissue engineering, and drug delivery applications for decades. In this review, we summarize the recent approaches in the chemical and physical preparation and the application of alginate hydrogels in wound dressings.

Nanoparticle-Based Wound Dressing: Recent Progress in the Detection and Therapy of Bacterial Infections

Bacterial infections in wounds often delay the healing process, and may seriously threaten human life. It is urgent to develop wound dressings to effectively detect and treat bacterial infections. Nanoparticles have been extensively used in wound dressings because of their specific properties. This review highlights the recent progress on nanoparticle-based wound dressings for bacterial detection and therapy. Specifically, nanoparticles have been applied as intrinsic antibacterial agents or drug delivery vehicles to treat bacteria in wounds. Moreover, nanoparticles with photothermal or photodynamic property have also been explored to endow wound dressings with significant optical properties to further enhance their bactericidal effect. More interestingly, nanoparticle-based smart dressings have been recently explored for bacteria detection and treatment, which enables an accurate assessment of bacterial infection and a more precise control of on-demand therapy.

Identification of 5-Hydroxymethylfurfural (5-HMF) as an Active Component Citrus Jabara That Suppresses FcεRI-Mediated Mast Cell Activation

Jabara (Citrus jabara Hort. ex Y. Tanaka) is a type of citrus fruit known for its beneficial effect against seasonal allergies. Jabara is rich in the antioxidant narirutin whose anti-allergy effect has been demonstrated. One of the disadvantages in consuming Jabara is its bitter flavor. Therefore, we fermented the fruit to reduce the bitterness and make Jabara easy to consume. Here, we examined whether fermentation alters the anti-allergic property of Jabara. Suppression of degranulation and cytokine production was observed in mast cells treated with fermented Jabara and the effect was dependent on the length of fermentation. We also showed that 5-hydroxymethylfurfural (5-HMF) increases as fermentation progresses and was identified as an active component of fermented Jabara, which inhibited mast cell degranulation. Mast cells treated with 5-HMF also exhibited reduced degranulation and cytokine production. In addition, we showed that the expression levels of phospho-PLCγ1 and phospho-ERK1/2 were markedly reduced upon FcεRI stimulation. These results indicate that 5-HMF is one of the active components of fermented Jabara that is involved in the inhibition of mast cell activation.

Topical administration of pullulan gel accelerates skin tissue regeneration by enhancing collagen synthesis and wound contraction in rats

Here, we have studied the efficacy of pullulan gel on wound healing by performing biochemical, biophysical and histological investigations. A 2 cm² open excision wound was made on the dorsum of the rats and topically treated with 500 μL of pullulan gel. The control group was left untreated. The povidone-iodine (PI) ointment treated animals were considered as positive control. The granulation tissues formed were collected at different time point intervals and used for various biochemical, biophysical and histological analyses. Biochemical analyses revealed that pullulan gel significantly (p < 0.001) improved the collagen, hexosamine, protein and DNA content. Biophysical analyses resulted in an increased rate of wound contraction (p < 0.001). The period of epithelialization was shorter (p < 0.001) in pullulan gel treated group (11 days) than control (22 days) and PI group (17 days). Histological evaluation on days 4, 8 and 11 substantiated that pullulan gel treatment improved the wound re-epithelialization, dermal regeneration, blood vessels formation and collagen synthesis than in control and PI groups. Interrupted SDS-PAGE of collagen showed an increase in Type III collagen band evident for the healing potential of pullulan gel. Thus, our results strongly prove that pullulan gel could be a potential wound healing agent.

In situ formation of injectable hydrogels for chronic wound healing

Hydrogels have been widely used in wound healing treatment over the past decade.