Effect of heat-moisture treatment of unpolished red rice on its starch properties and in vitro and in vivo digestibility

Recent Advances in Physical Processing Techniques to Enhance the Resistant Starch Content in Foods: A Review

The physical modification of starch to produce resistant starch (RS) is a viable strategy for the glycemic index (GI) lowering of foods and functionality improvement in starchy food products. RS cannot be digested in the small intestine but can be fermented in the colon to produce short-chain fatty acids rather than being broken down by human digestive enzymes into glucose. This provides major health advantages, like better blood sugar regulation, weight control, and a lower chance of chronic illnesses. This article provides a concise review of the recent developments in physical starch modification techniques, including annealing, extrusion, high-pressure processing, radiation, and heat-moisture treatment. Specifically, the focus of this paper is on the alteration of the crystalline structure of starch caused by the heat-moisture treatment and annealing and its impact on the resistance of starch to enzymatic hydrolysis, as well as the granular structure and molecular arrangement of starch caused by extrusion and high-pressure processing, and the depolymerization and crosslinking that results from radiation. The impacts of these alterations on starch's textural qualities, stability, and shelf life are also examined. This review demonstrates how physically modified resistant starch can be used as a flexible food ingredient with both functional and health benefits. These methods are economically and ecologically sustainable since they successfully raise the RS content and improve its functional characteristics without the need for chemical reagents. The thorough analysis of these methods and how they affect the structural characteristics and health advantages of RS emphasizes the material's potential as an essential component in the creation of functional foods that satisfy contemporary dietary and health requirements.

Effect of osmotic pressure and simultaneous heat-moisture phosphorylation treatments on the physicochemical properties of mung bean, water caltrop, and corn starches

This study aimed to investigate the physicochemical properties of modified starch prepared through the simultaneous heat-moisture and phosphorylation treatment (HMPT) and osmotic pressure treatment (OPT) for water caltrop starch (WCS), mung bean starch (MBS), and amylose-rich corn starch (CS) for different time periods. Furthermore, variations in starch content [amylose and resistant starch (RS)], swelling powder (SP), water solubility index (WSI), crystallinity, thermal properties, gelatinization enthalpy (ΔH), and glycemic index (GI) were examined. This study demonstrates that neither HMPT nor OPT resulted in a significant increase in the resistant starch (RS) content, whereas all samples succeeded in heat-treating at 105 °C for another 10 min exhibited a significant increase in RS content compared to their native counterparts. Moreover, the gelatinization temperatures of the three starches increased (To, Tp, and Tc), whereas their gelatinization enthalpy (ΔH) and pasting viscosity decreased. In particular, the GI of all three modified starches subjected to HMPT or OPT showed a decreasing trend with modification time, with OPT exhibiting the best effect. Therefore, appropriate modification through HMPT or OPT is a viable approach to develop MBS, WCS, and CS as processed foods with low GI requirements, which exceptionally may be suitable for canned foods, noodles, and bakery products.

The effect of heat moisture treatment times on physicochemical and digestibility properties of adzuki bean, pea, and white kidney bean flours and starches

The effects of heat moisture treatment (HMT) times on the physicochemical properties of three bean flours and their starch were analyzed. The colors of L*, b* and ΔE values increased significantly with time. The adzuki bean and pea flours showed better WAI and SP, and better gelation of starch at 2 h. The rheological properties of mixed HMT dough (3:7) exhibited the typical solid-like weak gel behavior. HMT had a significantly decreased on the pasting viscosity of bean flour starch with treated time. HMT caused the starch granules damage, but did not radically change the crystal type. FTIR results showed more proteins attached to the surface of starch granules, and the short-range molecular order decreased the DO at 2 h. In vitro digestibility inferred that RDS converted into SDS and RS. These results indicated that HMT significantly affected the digestibility and physicochemical properties of bean flours.

Chemical and Bioactive Properties of Red Rice with Potential Pharmaceutical Use

Red rice has been proposed as a super-food. Accordingly, the nutritional properties (AOAC), as well as its chemical composition, including sugars (HPLC-RI), organic acids (UFLC-PDA), tocopherols (HPLD-FD), and phenolic compounds (LC-DAD-ESI/MSn), together with the main bioactive properties (antioxidant, cytotoxic, antiproliferative, and antibacterial activities), were evaluated to access its nutritional benefits and health improvement potential. The most abundant macronutrients found were carbohydrates (87.2 g/100 g dw), proceeded by proteins (9.1 g/100 g dw), fat (2.6 g/100 g dw), and ash (1.1 g/100 g dw). Sucrose and raffinose were the only detected sugars, with sucrose presenting the maximum concentration (0.74 g/100 g dw). MUFAs and PUFAs were the predominant fatty acids (40.7% and 31%, respectively). Among the two detected tocopherol isoforms, γ-tocopherol (0.67 mg/100 g dw) predominated over α-tocopherol. The phenolic compounds profile, majorly composed of flavan-3-ols, should be associated with the detected bioactivities, which may provide biological benefits to human health beyond the primary nutritional effect. Overall, the bioactive potential of red rice was comprehensively accessed.

Advancements in enhancing resistant starch type 3 (RS3) content in starchy food and its impact on gut microbiota: A review

Resistant starch type 3 (RS3), often found in cooked starchy food, has various health benefits due to its indigestible properties and physiological functions such as promoting the abundance of gut beneficial microbial flora and inhibiting the growth of intestinal pathogenic bacteria. However, it is challenging to develop starchy food with high RS3 content. This review aims to provide a detailed overview of current advancements to enhance RS3 content in starchy food and its effects of RS3 on gut microbiota. These approaches include breeding high-amylose cereals through gene editing techniques, processing, enzyme treatments, storage, formation of RS3 nanoparticles, and the incorporation of bioactive compounds. The mechanisms, specific conditions, advantages, and disadvantages associated with each approach and the potential effects of RS3 prepared by different methods on gut microbiota are summarized. In conclusion, this review contains important information that aims to provide guidelines for developing an efficient RS3 preparation process and promote the consumption of RS3-enriched starchy foods to improve overall health outcomes.

Incorporating edible oil during cooking tailors the microstructure and quality features of brown rice following heat moisture treatment

While brown rice (BR) has numerous nutritional properties, the consumption potential of which is seriously restricted since the poor cooking quality and undesirable flavor. Here, edible oils (pork lard and corn oil, 1-5 wt%) were incorporated during the cooking of BR following heat moisture treatment. Incorporating corn oil rather than lard significantly ameliorated the texture properties (e.g. hardness, cohesiveness, and chewiness) and sensory properties of cooked BR. Both lard- and corn oil-incorporated cooked BR showed obvious structural changes accompanied by the formation of amylose-lipid complexes during cooking. It was confirmed that the incorporation of lard and corn oil allowed a higher degree of short-range molecular order, more V-type starch crystallites, and elevated nano-structural arrangements. Additionally, a decreased hardness (from 559.04 g to 424.18 g and 385.91 g, respectively) and enriched resistant starch (RS) were also observed, the highest RS content (15.95 % and 16.32 %, respectively) was observed when 1 wt% of lard and corn oil were incorporated.

Heat-moisture treatment to modify structure and functionality and reduce digestibility of wrinkled and round pea starches

Heat-moisture treatment (HMT) was employed to modify wrinkled pea (74.2 % and 76.5 % amylose) and round pea starches (35.9 % and 34.8 % amylose) at 35.0 % moisture, 110 or 130 °C, and 6 h. HMT increased the gelatinization temperatures and decreased the gelatinization enthalpy changes, reduced the pasting viscosities and gel hardness, and enhanced the enzymatic resistance of the pea starches in comparison with the native counterparts, with greater extents of changes observed for HMT at 130 °C overall. Although HMT decreased the relative crystallinity and elevated the proportion of amorphous conformation, the remaining double-helical crystallites in the modified samples showed improved thermal stability as revealed by differential scanning calorimetry (DSC). More importantly, the HMT-modified pea starches required a higher heating temperature of 120 °C, rather than 95 °C, in Rapid Visco Analyser to provide greater pasting viscosities and develop firmer gels, suggesting that the modified samples had stronger molecular entanglement than the native counterparts. Such molecular entanglement could also reduce enzymatic digestion of HMT-modified starches after boiling in water. With more diverse functional profiles and increased resistant starch (RS) contents (particularly for the HMT-modified wrinkled pea starches having 22.7-29.9 % RS), the HMT-modified pea starches could be promising new ingredients for food applications.

Effects of NaCl on the Physical Properties of Cornstarch-Methyl Cellulose Blend and on Its Gel Prepared with Rice Flour in a Model System

This study investigated the impact of NaCl on the physical properties of cornstarch-methyl cellulose (CS-MC) mixtures and their gels prepared with rice flour in a model system. Opposite trends were observed, showing that NaCl led to decreased viscosity of the CS-MC mixtures (liquid-based), whereas a more stable and robust structure was observed for the rice-flour-added gels (solid-based) with the addition of NaCl. The interference of NaCl with the CS-MS blend's ability to form a stable gel network resulted in a thinner consistency, as the molecules of the CS-MS blend may not bind together as effectively. On the contrary, NaCl showed the potential to enhance the protein network within CS-MC gels prepared with rice flour, thereby contributing to an augmentation in the stability or firmness of the cooked gels. Careful utilization of NaCl to optimize the physical properties of the CS-MC blends, as well as the gels based on rice flour, should be performed.

A review of starch swelling behavior: Its mechanism, determination methods, influencing factors, and influence on food quality

Swelling behavior involves the process of starch granules absorbing enough water to swell and increase the viscosity of starch suspension under hydrothermal conditions, making it one of the important aspects in starch research. The changes that starch granules undergo during the swelling process are important factors in predicting their functional properties in food processing. However, the factors that affect starch swelling and how swelling, in turn, affects the texture and digestion characteristics of starch-based foods have not been systematically summarized. Compared to its long chains, the short chains of amylose easily interact with amylopectin chains to inhibit starch swelling. Generally, reducing the swelling of starch could increase the strength of the gel while limiting the accessibility of digestive enzymes to starch chains, resulting in a reduction in starch digestibility. This article aims to conduct a comprehensive review of the mechanism of starch swelling, its influencing factors, and the relationship between swelling and the pasting, gelling, and digestion characteristics of starch. The role of starch swelling in the edible quality and nutritional characteristics of starch-based foods is also discussed, and future research directions for starch swelling are proposed.

Recrystallized Resistant Starch: Structural Changes in the Stomach, Duodenum, and Ileum and the Impact on Blood Glucose and Intestinal Microbiome in Mice

The structure and properties of resistant starch (RS) and its digestive products were assessed in mice. Digestion of recrystallized (group RS3, including RS3a and RS3b) and control RS (RS2, RS4, and RS5) in the stomach, duodenum, and ileum of mice was systematically analyzed along with in vivo digestive degradation of RS3. RS3a and RS3b significantly reduced the release of blood glucose. During in vivo digestion, the proportion of ultrashort and A chains in the RS3a and RS3b digestive residues gradually increased, whereas the proportion of B1 and B2 chains gradually reduced. B3+ chain proportions did not change. The final digestive residues in the ileum (RS3a-I90 and RS3b-I90) maintained a high proportion of suitable chain length, accounting for more than 60%. The crystalline structure of RS3a-I90 was weakened, indicating the hydrolysis of partial crystal structure. In comparison, RS3b-I90 maintained an orderly crystalline structure, indicating its higher resistance to enzymatic hydrolysis. In vivo experiments showed that RS could maintain the normal growth of mice and effectively control weight gain. RS3a significantly increased the concentrations of acetic, propionic, and butyric acids, while reducing the abundance of Firmicutes to Bacteroidetes ratio, further confirming the benefits of RS3 in gastrointestinal health.

Construction and In Vitro Digestibility of Recrystallized Starch Encapsulated in Calcium Alginate Beads

In order to reduce the digestion rate of starch in human body and improve the content of slowly digestible starch (SDS) and resistant starch (RS), millimeter calcium alginate beads encapsulated with different proportions of recrystallized starch were constructed in this study. First, we prepared recrystallized starch (RS3) by debranching waxy corn starch and retrogradation, and then encapsulated RS3 in calcium alginate beads by the ionic gel method. The microstructure of the beads was observed by scanning electron microscope, and the gel texture properties, swelling properties, and in vitro digestibility of the beads were studied. The results showed that the beads after cooking still maintained high hardness and chewiness, and the swelling power and solubility of the beads were lower than that of native starch. Compared with native starch, the content of rapidly digestible starch (RDS) in beads decreased, while the content of SDS and RS increased. The sample with the highest content of RS is RS3₁@Alginate₁, whose content of RS is 70.10%, 52.11 times higher than that of waxy corn starch and 1.75 times higher than that of RS3. RS3 encapsulated in calcium alginate beads has a good encapsulation effect, and the content of SDS and RS is greatly increased. This study has important implications for reducing the digestion rate of starch and regulating the health of people with diabetes and obesity.

Effects of Heat-Moisture Treatment on the Digestibility and Physicochemical Properties of Waxy and Normal Potato Starches

Heat-moisture treatment (HMT) is a safe, environmentally friendly starch modification method that reduces the digestibility of starch and changes its physicochemical properties while maintaining its granular state. Normal potato starch (NPS) and waxy potato starch (WPS) were subjected to HMT at different temperatures. Due to erosion by high-temperature water vapor, both starches developed indentations and cracks after HMT. Changes were not evident in the amylose content since the interaction between the starch molecules affected the complexation of amylose and iodine. HMT increased pasting temperature of NPS from 64.37 °C to 91.25 °C and WPS from 68.06 °C to 74.44 °C. The peak viscosity of NPS decreased from 504 BU to 105 BU and WPS decreased from 384 BU to 334 BU. The crystallinity of NPS decreased from 33.0% to 24.6% and WPS decreased from 35.4% to 29.5%. While the enthalpy values of the NPS declined from 15.74 (J/g) to 6.75 (J/g) and WPS declined from 14.68 (J/g) to 8.31 (J/g) at 120 °C. The solubility and swelling power of NPS decreased while that of WPS increased at 95 °C. Due to the lack of amylose in WPS, at the same HMT processing temperature, the reduction in peak viscosity of treated WPS compared to that of native starch was smaller than that of NPS. The resistant starch (RS) content of NPS after HMT at 120 °C was 73.0%. The slowly digestible starch (SDS) content of WPS after HMT at 110 °C was 37.6%.

Influence of Resistant Starch in Whole Rice on Human Gut Microbiota─From Correlation Implications to Possible Causal Mechanisms

Rice is the main staple food for a large population around the world, while it generally has a high glycemic index and low resistant starch (RS) content. Although many strategies have been applied to develop healthier rice products with increased RS contents, their actual effects on gut microbiota and human health remain elusive. In this review, currently available production methods of rice RS are briefly summarized, followed by a critical discussion on their interactions with gut microbiota and subsequent effects on human health, from correlation implications to causal mechanisms. Different contents, types, and structures of RS have been produced by strategies such as genetic manipulation and controlling cooking conditions. The difference can largely determine effects of rice RS on gut microbiota composition and metabolites by specific RS-gut microbiota interactions. This review can thus help the rice industry develop rice products with desirable RS contents and structures to generally improve human health.

Prevents kudzu starch from agglomeration during rapid pasting with hot water by a non-destructive superheated steam treatment

Superheated steam (SST) at different moisture contents (10% ∼ 30%) was used to prevent the agglomeration of kudzu starch during rapid pasting with hot water. Changes in pasting-related properties and multi-scale structures were investigated. At moisture content of 20%, SST dramatically reduced the agglomeration rate from 42.20% to 2.97% without destroying the microstructure of kudzu starch or deteriorating the rheological properties of kudzu starch paste, which was superior to the conventional pre-gelatinization treatment. The agglomeration was prevented mainly by decreasing the swelling power and increasing the pasting temperature of kudzu starch. The slight disruption of multi-scale structures may facilitate faster water absorption by kudzu starch, but it was not the primary prevention mechanism. Moreover, the solubility of kudzu starch was not related to the agglomeration, since it was significantly decreased by SST. Our findings could provide new insights into the rapid pasting of starchy powders or flours with hot water.

Effect of Heat-Moisture Treatments on Digestibility and Physicochemical Property of Whole Quinoa Flour

The starch digestion processing of whole grain foods is associated with its health benefits in improving insulin resistance. This study modified the digestibility of whole quinoa flour (WQ) via heat-moisture treatment (HMT), HMT combined with pullulanase (HMT+P), HMT combined with microwave (HMT+M), and HMT combined with citric acids (HMT+A), respectively. Results showed that all the treatments significantly increased (p < 0.05) the total dietary fiber (TDF) content, amylose content, and resistant starch (RS) content, however, significantly decreased (p < 0.05) the amylopectin content and rapidly digestible starch (RDS) content of WQ. HMT+P brought the highest TDF content (15.3%), amylose content (31.24%), and RS content (15.71%), and the lowest amylopecyin content (30.02%) and RDS content (23.65%). HMT+M brought the highest slowly digestible starch (SDS) content (25.09%). The estimated glycemic index (eGI) was respectively reduced from 74.36 to 70.59, 65.87, 69.79, and 69.12 by HMT, HMT+P, HMT+M, and HMT+A. Moreover, a significant and consistent reduction in the heat enthalpy (ΔH) of WQ was observed (p < 0.05), after four treatments. All these effects were caused by changes in the starch structure, as evidenced by the observed conjunction of protein and starch by a confocal laser scanning microscope (CLSM), the decrease in relative crystallinity, and transformation of starch crystal.

Removal of cadmium from rice grains by acid soaking and quality evaluation of decontaminated rice

Contamination of rice by cadmium (Cd) is threatening a large population in China. In this study, we report that soaking rice grains in a hydrochloric acid (HCl) solution can remove Cd to a desirable extent. The results indicated that the degree of Cd removal was up to 45%∼85% at different soaking times and concentrations of HCl (0.06 M ∼ 0.18 M), which was found to be logarithmically correlated with the reaction time at the optimized liquid-solid ratio of 1:2. Three HCl concentration-dependent mathematical models were established, which revealed various optimal soaking conditions depending on the initial Cd contamination. Four Cd-contaminated rice grain samples with different degrees of contamination were then tested based on the mathematical models, and the final Cd content was reduced to an acceptable extent. Moreover, the physicochemical and food properties of rice flours and rice grains after Cd removal were evaluated to highlight their potential applications.

Impacts of Hydrothermal Treatments on the Morphology, Structural Characteristics, and In Vitro Digestibility of Water Caltrop Starch

The influence of hydrothermal treatments on the structural properties and digestibility of water caltrop starch was investigated. Scanning electron microscopy (SEM) showed some small dents on the surface of starch granules for samples treated with heat moisture treatment (HMT), but not for samples treated with annealing (ANN) which generally showed smoother surfaces. The gelatinization temperature of starch was generally increased by hydrothermal treatments, accompanied by a trend of decreasing breakdown viscosity. These results implied the improvement of thermal and shearing stability, particularly for HMT in comparison to ANN. After being cooked, the native and ANN-modified water caltrop starch granules were essentially burst or destroyed. On the other hand, the margin of starch granules modified by HMT and dual hydrothermal treatments remained clear with some channels inside the starch granules. X-ray diffraction revealed that the crystalline pattern of water caltrop starch changed from the CA-type to the A-type and the relative crystallinity reduced with increasing moisture levels of HMT. Results of ANN-modified water caltrop starch were mostly similar to those of the native one. Moreover, water caltrop starch modified with HMT20 and dual modification contained a pronouncedly higher resistant starch content. These results suggested that HMT, ANN, and dual modification effectively modified the functional properties of water caltrop starch.

Impact of processing techniques on the glycemic index of rice

Rice is an important starchy staple food and generally, rice varieties are known to have a higher glycemic index (GI). Over the years, the significance of GI on human health is being better understood and is known to be associated with several lifestyle disorders. Apart from the intrinsic characteristics of rice, different food processing techniques are known to have implications on the GI of rice. This work details the effect of domestic and industrial-level processing techniques on the GI of rice by providing an understanding of the resulting physicochemical changes. An attempt has been made to relate the process-dependent digestion behavior, which in turn reflects on the GI. The role of food constituents is elaborated and the various in vitro and in vivo approaches that have been used to determine the GI of foods are summarized. Considering the broader perspective, the effect of cooking methods and additives is explained. Given the significance of the cereal grain, this work concludes with the challenges and key thrust areas for future research.

Modifying Effects of Physical Processes on Starch and Dietary Fiber Content of Foodstuffs

Carbohydrates are one of the most important nutrients in human consumption. The digestible part of carbohydrates has a significant role in maintaining the energy status of the body and the non-digestible parts like dietary fibers have specific nutritional functions. One of the key issues of food processing is how to influence the technological and nutritional properties of carbohydrates to meet modern dietary requirements more effectively, considering particularly the trends in the behavior of people and food-related health issues. Physical processing methods have several advantages compared to the chemical methods, where chemical reagents, such as acids or enzymes, are used for the modification of components. Furthermore, in most cases, these is no need to apply them supplementarily in the technology, only a moderate modification of current technology can result in significant changes in dietary properties. This review summarizes the novel results about the nutritional and technological effects of physical food processing influencing the starch and dietary fiber content of plant-derived foodstuffs.

Recent advances in heat-moisture modified cereal starch: Structure, functionality and its applications in starchy food systems

Cereals, one of the starch sources, have a tremendous and steady production worldwide. Starchy foods constitute the major part of daily calorie intake for humans. As a simple and green modification approach, heat-moisture treatment (HMT) could change the granular surface characteristics and size, crystalline and helical structure, as well as molecular organization of cereal starch. The changing degree is contingent on HMT parameters and botanical origin. Based on the hierarchical structure, this paper reviews functionalities of heat-moisture modified cereal starch (HMCS) reported in latest years. The functionality of HMCS could be affected by co-existing non-starch ingredients through non-covalent/covalent interactions, depolymerization or simply attachment/encapsulation. Besides, it summarizes the modulation of HMCS in dough rheology and final food products' quality. Selecting proper HMT conditions is crucial for achieving nutritious products with desirable sensory and storage quality. This review gives a systematic understanding about HMCS for the better utilization in food industry.