Chitosan/sodium polyborate based micro-nano coating with high flame retardancy and superhydrophobicity for cotton fabric

Enhancing flame retardancy and multi-functionalization of environmentally friendly cotton fabrics with a polydimethylsiloxane-based polyurethane

Phosphorus-containing flame retardants are prone to result in the buildup of biotoxins, while halogen flame retardants easily lead to hazardous gases. Therefore, it is crucial to develop a multifunctional flame-retardant cotton fabric without phosphorus and halogen. Herein, single-ended hydroxy-terminated polydimethylsiloxane (PDMS-ID) was synthesized through single-ended hydrosilicone oil and 1,4-butanediol, followed by the preparation of a waterborne polyurethane (RWPU) containing side chain polydimethylsiloxane through the reaction of PDMS-ID with isocyanate prepolymer. Characterization data shows that its particle size distribution is relatively dispersed while maintaining good emulsification performance. Based on this, a halogen-free and phosphorus-free multifunctional flame retardant cotton fabric (COF-BBN@RWPU) was successfully prepared through treatment with boric acid/borax/3-aminopropyltriethoxysilane solution and subsequent RWPU encapsulation. In vertical flammability test (VFT), COF-BBN@RWPU has a char length of 57 mm and a limiting oxygen index (LOI) of 42.3 % with a 11 % weight gain while pure cotton was burned through with a LOI of 18.0 %. In addition, the total heat release and total smoke release of COF-BBN@RWPU decreased by 80.0 % and 47.2 %, compared with pure cotton. Additionally, COF-BBN@RWPU can achieve a maximum contact angle of 140.1° with an oil-water separation rate of 98.4 %. This study presents an eco-friendly approach to achieving the multifunctionality of cellulose fabrics.

Construction of a durable, halogen-free, and phosphorus-free flame retardant cotton fabric system with hydrophobic properties by phase separation and interface polymerization

Inspired by the synthesis of polyurethane, a multifunctional fabric with hydrophobic and long-lasting flame retardancy was prepared through the phase separation and interfacial reaction process between PEI (polyethyleneimine)/BX (borax) aqueous solution and isocyanate terminated polydimethylsiloxane (PDMS-NCO) in tetrahydrofuran solution. The limit oxygen index of the treated fabric increased from 18.0 % to 33.7 %, and the total heat release decreased by 34.2 %. The enhancement of flame retardant performance and thermal stability is attributed to the enhanced char-forming capacity. After 50 cycles of water washing, the cotton fabric can still pass the vertical flammability test because of the curing effect of PDMS-NCO on functional additives. Furthermore, SEM analysis revealed that the formation of nano-rough structures on the fibers was promoted by phase separation, thus leading an increased water contact angle of sample to 139°. The materials utilized in this modified process do not contain elements such as F, Cl, Br, and P, indicating its potential as an environmentally friendly methodology for fabric functionalization.

Halloysite-based inorganic-organic hybrid coatings for durable flame retardant, hydrophobic and antibacterial properties of cotton fabrics

Developing durable protective cotton fabrics (CF) against potential environmental dangers such as fire hazards and bacterial growth remains an imperative but tough challenge. In this study, flame retardant, antibacterial and hydrophobic CF were successfully prepared via two-step coating. The inner coating entailed polyelectrolyte complexes consisting of polyethyleneimine and ammonium polyphosphate with the goal of enhancing the flame retardancy of CF. Halloysite nanotubes (HNTs), a kind of tubular silicate mineral, were creatively modified and introduced to multifunctional coatings to improve flame retardant and antibacterial properties of CF. N-halamine modified HNTs (HNTs-EA-Cl) and polydimethylsiloxane were applied as the outer coating to endow CF with antibacterial and hydrophobic properties and further improve the flame retardancy of CF. After halloysite-based inorganic-organic hybrid coatings, the limiting oxygen index of the treated samples (PAHP-CF) was over 28 %, and the release of heat and smoke was significantly inhibited. PAHP-CF could inactivate 100 % E. coli and S. aureus within 2 h. More importantly, PAHP-CF showed excellent hydrophobicity with a water contact angle of 148° and exhibited great prevention of bacterial adhesion. PAHP-CF exhibited excellent washing durability undergoing 5 washing cycles. This study promotes the development of multifunctional coatings and offers a new way to manufacture multifunctional cotton fabrics.

Anti-flammable, anti-fouling, anti-bacterial treatment of cotton fabrics with MOF-based hybrid coatings for highly efficient oil-water separation

A flame-retardant and hydrophobic coating was deposited on the surface of the cotton fabric via a two-step spray deposition technique. Specifically, the coating was composed of flame retardant components (guanidine phosphate) and hydrophobic species (Ti-MOF and bis(3-aminopropyl)-terminated poly(dimethylsiloxane) (PDMS)) and crosslinked with glutaraldehyde. The limiting oxygen index (LOI) of the coated cotton fabrics increased from 18.0 % to 32.0 % (15#) and 26.5 % (15#-Ti-PDMS) relative to that of the original cotton fabric, and the coated cotton fabrics also self-extinguished in the UL-94 flammability test. Compared with that of the original cotton fabric, the PHRR of the coated fabrics was significantly lower, reaching 80 %. The coated cotton fabrics (15# and 15#-Ti-PDMS) had good antibacterial properties against Staphylococcus aureus (S. aureus). In addition, 15#-Ti-PDMS had high hydrophobicity, good washing and abrasion resistance and good water-oil separation performance. Its water contact angle was 146°. The water contact angle remained above 130° after 10 laundering cycles and 50 scratch cycles. Even under strongly acidic and basic conditions, the water-oil separation efficiency of 15#-Ti-PDMS was greater than 99 %, and it was still greater than 90 % after 10 cycles. Therefore, a simple and effective method for preparing flame-retardant, hydrophobic and antibacterial cotton fabrics was developed.

Biomass-inspired fabrication of eco-friendly, durable flame retardant and ultraviolet resistant lyocell fabric

The pursuit of environmental friendliness, efficiency, and durability is paramount in the realm of flame retardant textile modification. Therefore, an innovative approach was designed to develop a gallic acid-derived intumescent flame retardant (GADPP), which contained reactive (-P(=O)(O-NH4+)2) and (-P(=O)(OCH2CH3)2) groups, facilitating functional modification of lyocell fabric. The GADPP modification effectively improved both flame retardancy and ultraviolet (UV) resistance of lyocell fabric. Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy has substantiated the uniform distribution and covalent bond grafting of GADPP onto the fabric. Remarkably, even after 50 laundering cycles (LCs), the limiting oxygen index and UV protection factor values of lyocell fabric modified with 30 wt% GADPP remained at 29.8 % and 117.69, respectively. These results highlighted the synergistic effect of GADPP on enhancing the flame retardancy and UV resistance of lyocell fabric. Furthermore, this multi-functional modification strategy provides a sustainable path for the enduring enhancement of flame retardant and UV protective properties in lyocell fabrics.

Bio-based flame retardant coatings for polyester/cotton fabrics with high physical properties using ammonium vinyl phosphonate-grafted chitosan complexes

Polyester/cotton (T/C) blended fabrics are widely utilized in textile due to the dimensional stability and high elasticity provided by polyester, combined with the comfort and moisture absorption offered by cotton. However, simultaneously enhancing the flame retardancy and maintaining the physical properties of T/C blended fabrics for clothing and furniture applications remains a big challenge. This study introduces a bio-based flame-retardant coating using polyelectrolyte complexes (PEC) composed of ammonium vinyl phosphonate-grafted chitosan (AMVP-g-CS). The protonation degree of the PEC coating is controlled by adjusting the pH to solidify and stabilize the complex structure, preparing bio-based PEC flame retardant T/C blended fabric. Flame retardant analysis reveals that the coated fabrics achieved a limiting oxygen index of 30.5 % and a char length of 11 mm, indicating significantly improved flame retardancy. The combustible volatile substances are significantly reduced for the coated fabrics, achieving a gas-phase flame retardant effect, and forming an expansive char layer with thermal insulation and oxygen blocking properties. Importantly, physical analysis proves that the PEC deposition improved mechanical properties, satisfactory whiteness index and hand feeling of the fabrics. This work opens up a pragmatic and industrially feasible strategy for the development of CSs in the field of flame retardant coating.

One-Step Spraying Strategy for Fabricating Bioinspired, Graphene-Based, and Multifunctional-Integrated Coatings on Structural Steel with Good Water Repellency, Fireproofing, Anticorrosion, and Durability

Traditionally, many coatings were merely concentrated on settling the inherent fire protection problem of steel structures, while surface contamination and corrosion susceptibility should also be considered. Concurrently addressing these problems in fireproof efficiency and surface multifunctionality has become an issue of great significance in further expanding the application value in industrial and daily scenarios. Based on this condition, ecofriendly, graphene-based, and superhydrophobic coatings with multifunctional integration were constructed on steel via a one-step spraying method. The as-prepared coatings mainly consist of epoxy resin (EP), silicone resin (SR), a cyclodextrin-based flame retardant (MCDPM), expandable graphite (EG), and multilayered graphene (MG). The results demonstrate that the water contact angle (WCA) and water sliding angle (WSA) of as-prepared coatings can reach 156.8 ± 1.6 and 5.8 ± 0.7°, respectively, revealing good water repellency and self-cleaning properties. The coatings can also exhibit adequate adaptability for various substrates including wood, polyurethane foam, and cotton fabrics. Besides, good durability and robustness of coatings have been also verified via acid/alkali immersion, outdoor exposure, O2/plasma etching, and linear abrasion tests. Simultaneously, the coatings can exhibit excellent anticorrosion capacity for steel materials via a double barrier effect. Most importantly, the coatings have exhibited the lowest backside temperature (234.5 °C) during fire impact tests, suggesting excellent fireproof and heat insulation performance. This fact can be ascribed to the conjunct action between the physical/chemical charring process of flame retardants and the remarkable thermal stability of graphene. Consequently, this article can be expected to further promote the development and application of multifunctional-integrated coatings for steel structures in more fields.

PFAS-free superhydrophobic chitosan coating for fabrics

In view of health and environmental concerns, together with the upcoming restrictive regulations on per- and polyfluoroalkyl substances (PFAS), less impactful materials must be explored for the hydrophobization of surfaces. Polysaccharides, and especially chitosan, are being explored for their desirable properties of film formation and ease of modification. We present a PFAS-free chitosan superhydrophobic coating for textiles deposited through a solvent-free method. By contact angle analysis and drop impact, we observe that the coating imparts hydrophobicity to the fabrics, reaching superhydrophobicty (θA = 151°, θR = 136°) with increased amount of coating (from 1.6 g/cm2). This effect is obtained by the combination of chemical water repellency of the modified chitosan and the nano- and micro-roughness, assessed by SEM analysis. We perform a comprehensive study on the durability of the coatings, showing good results especially for acidic soaking where the hydrophobicity is maintained until the 8th cycle of washing. We assess the degradation of the coating by a TGA-IR investigation to define the compounds released with thermal degradation, and we confirm the coating's biodegradability by biochemical oxygen consumption. Finally, we demonstrate its biocompatibility on keratinocytes (HaCaT cell line) and fibroblasts (HFF-1 cell line), confirming that the coating is safe for human skin cells.

B/P/N flame retardant based on diboraspiro rings groups for improving the flame retardancy, char formation properties and thermal stability of cotton fabrics

Developing flame retardant cotton fabrics (CF) is crucial for minimizing the harm caused by fires to people. To improve the flame retardancy of CF, this paper has synthesized a novel flame retardant called diboraspiro tetra phosphonate ammonium salt (N-PDBDN). The structure of N-PDBDN has been analyzed using FT-IR and NMR. Treating CF with N-PDBDN can increase the limiting oxygen index (LOI) to 36.2 % with a weight gain of 10.1 %. Moreover, even after undergoing 50 laundering cycles (LCs), the LOI remains at 27.1 %, indicating good flame retardancy and durability. Scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) show the presence of P and N elements on N-PDBDN treated CF, suggesting successful bonding between N-PDBDN and cellulose. Thermogravimetric analysis (TGA) results demonstrate that the addition of N-PDBDN significantly enhances the thermal stability and carbon formation ability of CF. Furthermore, cone calorimetry tests reveal reduced heat release rates (HRR), prolonged time to ignition (TTI), and 38 % lower total heat release (THR) in CF treated with N-PDBDN compared with pure cotton. Finally, a potential flame retardant mechanism involving N-PDBDN is proposed. These findings indicate that incorporating an ammonium phosphate group into CF can effectively improve the flame retardancy and durability.

Facile Fabrication of Highly Efficient Chitosan-Based Multifunctional Coating for Cotton Fabrics with Excellent Flame-Retardant and Antibacterial Properties

Interest in the development of eco-friendly, sustainable, and convenient bio-based coatings to enhance flame retardancy and antibacterial properties in cotton fabrics is growing. In this work, chitosan was protonated at its amino groups using a method with a high atom economy using an equimolar amount of amino trimethylene phosphonic acid (ATMP), resulting in the fabrication of a single-component chitosan-based multifunctional coating (ATMP-CS), thereby avoiding any additional neutralization or purification steps. Cotton fabrics coated with various loads of ATMP-CS were prepared through a padding-drying-curing process. The morphology, thermal stability, mechanical properties, antibacterial properties, flame-retardant behavior, and flame-retardant mechanism of these fabrics were investigated. The coating exhibited excellent film-forming properties, and it imparted a uniform protective layer onto the surfaces of the cotton fabrics. When the load capacity reached 11.5%, the coated fabrics achieved a limiting oxygen index of 29.7% and successfully passed the VFT test. Moreover, the ATMP-CS coating demonstrated antibacterial rates against Escherichia coli and Staphylococcus aureus reaching 95.1% and 99.9%, respectively. This work presents a straightforward and gentle approach to fabricating colorless, environmentally friendly, and highly efficient fabric coatings that have potential applications in promoting the use of bio-based materials.

Preparation and application of halogen-free and efficient Si/P/N-containing flame retardants on cotton fabrics

Cotton fabric is extensively utilized due to its numerous applications, but the flammability associated with cotton fabric poses potential security risks to individuals. A halogen-free efficient flame retardant named poly [(tetramethylcyclosiloxyl spirocyclic pentaerythritol)-piperazin phosphate] (PCPNTSi) was developed to consolidate the fire retardance of cotton fabrics. After PCPNTSi treatment, the limiting oxygen index (LOI) of cotton fabric with 30 % weight gain (CP3) was raised to 32.8 %. In the vertical flammability test (VFT), CP3 has self-extinguished performance with a char length of 8.7 cm. The heat release rate (HRR) of cotton fabric with 20 % weight gain (CP2) is 78.8 % lower than that of pure cotton fabric (CP0). In addition, the total smoke release (TSP) of CP2 is 41.7 % lower than that of CP0, indicating PCPNTSi gives cotton fabric a good capability to inhibit smoke release. Finally, the possible flame retardant mechanism was discussed by the data of scanning electron microscope (SEM), energy dispersive spectrometer (EDS), X-ray photoelectron spectroscopy (XPS), Fourier Transform infrared spectroscopy (FT-IR) and thermogravimetric infrared spectroscopy (TG-IR). The results show that PCPNTSi is an intumescent flame retardant acting in both gas phase and solid phase.

Enhancing the flame retardancy of polylactic acid nonwoven fabric through solvent-free transparent coating

Polylactic acid (PLA) nonwovens, recognized as eco-friendly substitutes for petroleum-based synthetic fibers, face a significant challenge due to their inherent flammability. This work addresses this concern by synthesizing a hyperbranched polyphosphoramide flame retardant (TPDT) through a one-step polycondensation process without using solvent and catalyst. TPDT is subsequently applied to PLA nonwovens using a dip-pad finishing technique. Notably, with a mere 7 wt% weight gain of TPDT, the PLA nonwovens exhibit a substantial increase in the limited oxygen index (LOI) value, reaching 32.3 %. Furthermore, the damaged area in the vertical burning test is reduced by approximately 69.2 %. In the cone calorimeter test, 17 wt% weight gain of TPDT results in a 51.4 % decrease in peak heat release rate and a 56.0 % reduction in total heat release compared to the control PLA. Additionally, char residue increases from 1.5 wt% to 31.1 wt% after combustion. The strong affinity between TPDT and PLA molecules persists even after repeated abrasion, ensuring sustained flame retardancy. Importantly, the introduction of TPDT also imparts increased softness to the PLA nonwovens. This work addresses this concern by synthesizing a hyperbranched polyphosphoramide flame retardant (TPDT) through a solvent-free, catalyst-free, and one-step polycondensation process.

A flame-retardant and conductive fabric-based triboelectric nanogenerator: Application in fire alarm and emergency evacuation

The fabrics commonly used in architectural decorative materials pose significant fire hazards due to their flammability and rapid fire spread. Moreover, the traditional fire-alarm systems may fail to function properly in complex fire environments owing to power supply disruptions. In this study, we developed a low-cost and eco-friendly flame-retardant conductive fabric-based triboelectric nanogenerator (FCF-TENG) by integrating flame-retardant conductive nylon fabric and polytetrafluoroethylene soaked cotton fabric. This nanogenerator exhibits excellent flame-retardant properties and remarkable energy-harvesting capabilities. The nylon fabric, treated with layer-by-layer self-assembly method, possesses outstanding self-extinguishing capability and melt-dripping resistance. Additionally, the electrical performance of FCF-TENG significantly improves, with a 10-fold boost in conductivity, and the open-circuit voltage increases by 84% to 92 V. Besides, by incorporating the rectifier circuit, the FCF-TENG is capable of completely charging a 1 μF capacitor within 30 s. Furthermore, the FCF-TENG was successfully applied as a self-powered sensor in the fire-alarm system and served as a safety exit indicator for evacuees and fire rescue. This work presents an effective and innovative application of multifunctional smart textiles for energy harvesting and self-powered sensing.

A universal eco-friendly flame retardant strategy for polylactic acid fabrics and other polymer substrates

Various polymer substrates have their particular combustion features, therefore, developing an effective universal flame retardant strategy for various polymer substrates is of great practical importance. Meanwhile, as substitutes for petroleum-based products, bio-based flame retardants and biodegradable polylactic acid (PLA) meet the requirements of sustainable development. In this work, a fully bio-based flame retardant coating (PAGS) was prepared using phytic acid (PA) and guanosine (GS). PAGS was used as a universal flame retardant coatings for polylactic acid (PLA) fabrics and other substrates, including cotton fabrics, polyethylene terephthalate (PET) fabrics, polyamide (PA) fabrics, polyurethane (PU) foams, polyethylene terephthalate (PET) films, and woods. The PAGS-treated substrates were able to self-extinguish and eliminate molten droplets. Similarly, the PAGS coating significantly suppressed the heat release of each substrate. The P-containing free radicals in the gas phase were able to interact with highly reactive H, HO and alkyl radicals, blocking the chain reaction during combustion. The flammable gas density was also diluted by nonflammable gases. The formed continuous porous and dense intumescent char layer hindered heat and oxygen. It is suggested that this work provides a simple and efficient flame retardant strategy for improving the fire safety of various polymer substrates.

Formaldehyde-free and durable phosphorus-containing cotton flame retardant with -N=P-(N)3- and reactive ammonium phosphoric acid groups

A flame retardant (FR) hexachlorocyclotriphosphazene diethylenetriamine ammonium phosphoric acid (HDAPA) was synthesized. Vertical flammability test and limiting oxygen index (LOI) results showed that cotton samples finished with HDAPA solutions (15 % and 20 %) could pass vertical flame retardancy test, and LOIs reached 30.1 % and 35.4 % even after 50 laundering cycles according to AATCC 61-2013 3A washing standard (3A), performing flame retardancy and washing durability. Meanwhile, Fourier transform infrared and X-ray photoelectron spectroscopy analyses suggested that HDAPA was grafted on cotton fibers through -P(=O)-O-C covalent bond. Total heat release (1.98 MJ/m2) and char residue (16.2 %) of HDAPA treated cotton were much lower than those (4.26 MJ/m2, 3.2 %) of untreated cotton. Thermogravimetry results showed HDAPA changed thermal decomposition pathway of cotton fabric, which was further supported by thermogravimetric-Fourier infrared spectrometer results, revealing HDAPA performed a condensed phase flame retardancy mechanism. Scanning electron microscopy implied HDAPA entered amorphous region of cotton fibers to react with cellulose. Mechanical properties of HDAPA treated cotton decreased a little. Although the synthesis process used formaldehyde but no free formaldehyde released. In consequence, the aforementioned results indicated that the introduction of -N=P-(N)3- and -P(=O)(O-NH4+)2 groups to FR was an viable method to improve flame retardancy and durability.

Aldehyde-free and bio-based durable coatings for cellulose fabrics with high flame retardancy, antibacteria and well wearing performance

The bio-based coatings of cellulose fabrics (cotton) had attracted increasing attention for multifunction and sustainability but suffered from poor durability and low efficiency. Here, the aldehyde-free and durable coatings for cotton fabrics (CPZ@CF) with satisfactory flame retardancy, antibacteria as well as wearing performance were prepared through the interfacial coordination effect where the well-organized zinc phytate complex were in situ grew on the pre-treated surface of cotton fabrics with chitosan (CS) and Zn2+. The CZP@CF exhibited excellent antibacterial activity for Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) with 99.99 % antibacterial rates benefiting from the synergistic effect between Zn2+ and CS. Meanwhile, even the CPZ coatings loading was only 1.5 wt%, the fire safety of CZP@CF remarkably enhanced owing to the excellent synergistic catalytic charring and free radical capture. More importantly, the antibacterial rates of CZP@CF for S. aureus and E. coli still reached 99.99 % and 91.67 % after 50 washing cycles. Additionally, this treatment method did not deteriorate the fabrics properties, including mechanical and breathability as well as wearing performance, which provided the approach to fabricate the flame retardant and antibacterial textiles with well durability and wearing performance.

Bio-based alginate and Si-, P- and N-containing compounds cooperate toward flame-retardant modification of polyester fabrics

Imparting flame retardancy to polyester fabrics is still a pressing issue for the textile industry. To this end, a composite coating was developed by phosphite, pentamethyldisiloxane, urea and sodium alginate, and then applied together with calcium chloride to prepare flame-retardant polyester fabrics. The optimized polyester fabrics named PF-HUSC exhibited a rough surface with P, Si, N and Ca element distributions, as observed by scanning electron microscope (SEM) and energy dispersive X-ray spectrometer (EDX). Flame retardancy evaluations showed that the damaged length of PF-HUSC with a limiting oxygen index (LOI) value of 35.3 ± 0.3 % was reduced from the contrastive 17.6 ± 0.4 cm to 4.6 ± 0.2 cm after vertical burning test. Thermogravimetric (TG) test confirmed that PF-HUSC retained a char residue as high as 35.1 % at 700 °C. Cone calorimetry test displayed that the total heat release (THR) and total smoke production (TSP) values of PF-HUSC were reduced to 3.1 MJ/m2 and 1.1 m2, respectively, as compared to those of pure polyester fabrics. More importantly, PF-HUSC still exhibited higher LOI value than that of pure polyester fabrics after 25 washing cycles. Hence, the coating scheme is considered as a new method to expand the preparation of flame-retardant polyester fabrics.

Green synthesis of bio-based flame retardant/natural rubber inorganic-organic hybrid and its flame retarding and toughening effect for polylactic acid

Polylactic acid (PLA) has garnered significant interest as a bio-based polymer due to its favorable thermal and processing characteristics, as well as its notable economic and environmental benefits. However, the drawbacks such as flammability and poor toughness of PLA severely constrained its applications in more fields. Here, based on the outstanding flame-retardant properties of core-shell flame retardant (CSFR) and the toughening potential of natural rubber (NR), we synthesized inorganic-organic hybrid of CSFR-NR using an aqueous synthesis to synchronous optimization of the comprehensive performance of PLA. The as-prepared CSFR-NR with "hard core and soft shell" possess the ability to promote char formation and facilitate uniform dispersion in the PLA matrix. Consequently, the PLA/CSFR-NR showed an excellent flame retardancy with the limiting oxygen index (LOI) value of 31.5 % and UL-94 V-0 rating and synergistic toughening effect with absolutely improvement in elongation at break and notched izod impact strength, achieving a balance between the fire safety and mechanical performance. Moreover, the degradation rate of PLA has also been substantially promoted by CSFR-NR in simulated seawater. Hence, this study offers a straightforward, efficient, and environmentally friendly strategy for creating high-performance flame retardant and toughened bioplastics.

Two birds, one stone: Enhancement of flame retardancy and antibacterial property of viscose fabric using an aminoazole-based cyclotriphosphazene

Enhancing the fire-retardant and antibacterial properties of viscose fabric through a simple strategy is crucial and urgent. In this study, an aminoazole-based cyclotriphosphazene (HATA) was designed and synthesized through nucleophilic substitution between hexachlorocyclotriphosphazene and 3-amino-1,2,4-triazole. The application of a rapid dipping strategy and the use of 10 wt% HATA aqueous solution significantly increased the limiting oxygen index of the viscose fabric from 19.3 % to 28.4 %. In addition, the HATA-treated fabric exhibited self-extinguishing properties in vertical flame testing. The peak heat release rate of HATA-treated fabric, according to pyrolysis combustion flow calorimetry, significantly decreased by over 83 %. The scanning electron microscope images revealed the original woven fabric structure after burning. The thermogravimetric infrared spectroscopy and X-ray photoelectron spectroscopy results confirmed that the introduction HATA in viscose hindered the release of combustible gas and facilitated the formation of a protective char layer. In addition, 10 % HATA-viscose exhibited remarkable antimicrobial properties, achieving 99.96 % and 99.84 % antibacterial rates against Staphylococcus aureus and Escherichia coli, respectively. Furthermore, HATA-treated viscose fabric exhibited favorable mechanical performance, whiteness, and air permeability. This research provides a simple and effective flame-retardant and antibacterial treatment strategy for viscose fabric.

Integrating multifunctional highly efficient flame-retardant coatings with superhydrophobicity, antibacterial property on cotton fabric

There has been a growing interest in bio-based flame-retardant coating layer with good antibacterial activity for cotton fabric owing to the arising environmental pollution and viral and bacterial infectious risks. In this study, multifunctional flame-retardant coatings with superhydrophobicity and antibacterial property were integrated on cotton fabric through two-step method. The first layer of phosphorylated chitosan (PCS) biobased coating (C4) endowed the fabric highly efficient flame retardancy and antibacterial activity, and the second layer of modified poly(2-hydroxyethyl methacrylate phosphate ester) (PHEMAP) coating by perfluorooctyltriethoxysilane (P/F) provided the fabric excellent superhydrophobicity and self-cleaning ability. The C4-P/F fabric exhibited a shorter damage length of only 6.2 cm and achieved a higher char yield of 22.3 % than the C4 fabric in the vertical combustion test, and the limited oxygen index of the C4-P/F fabric increased to 32.5 %. The water contact angle (WCA) of the C4-P/F fabric reached above 150 o. Moreover, the C4-P/F fabric exhibited excellent antibacterial activity against Escherichia coli and Staphylococcus aureus. The highly efficient flame-retardant, superhydrophobic, antibacterial fabric is promising in home and public decoration, fire protection fields.

Constructing lignin based nanoparticles towards flame retardant thermoplastic polyurethane composites with improved mechanical and oxidation resistant properties

A multifunctional lignin derivative nanoparticle (C-P-Lignin) was synthesized by grafting phenyl dichloro sphosphineoxid and 1, 4-dimethoxyacetylene stepwise on the lignin, then it was applied to prepare the thermoplastic polyurethane (TPU) composite with improved mechanical properties, oxidation resistance, and flame retardancy. The tensile strength, the elongation at break, and the toughness of the TPU/2C-P-Lignin sample reached 28.3 MPa, 941 %, and 139.0 MJ/m2 respectively, which were increased by 39.0 %, 3.4 %, and 33.9 % respectively compared with that of the control TPU sample. The anti-fatigue property was also improved. More importantly, the mechanism of the improved mechanical properties was also calculated and simulated by FTIR and Materials Studio software. The TPU/2C-P-Lignin sample exhibited superior oxidation resistance during the process of photoaging and thermal oxidative aging. Furthermore, the peak heat release rate and the smoke production rate for theTPU/2C-P-Lignin sample was reduced by 50.0 % and 53.8 % compared with that of the control TPU. The reason was that the C-P-Lignin is conducive to the formation of uniformly distributed carbon layers. It is expected that this work can provide a new method for expanding the utilization of waste wood as a multifunctional lignin-based filler to improve fire safety and extend the service life of TPU polymers.

Tunable construction of fire safe and mechanically strong hierarchical composites towards electromagnetic interference shielding

Cotton fabric composites were designed to be protected by fire safe thermoplastic polyurethane (TPU) composites for developing electromagnetic interference (EMI) shielding polymer composites with superior mechanical properties. Herein, the as-prepared MXene was coated onto the fiber surface of cotton and then thermally compressed with TPU composites, which were filled with the sodium dodecyl sulfate modified layered double hydroxides functionalized the short carbon fiber hybrids through melt blending method. Then, a series of highly fire safe cotton/TPU hierarchical composites were constructed by a designed thermal compression technique. For instance, the obtained cotton/TPU hierarchical sample showed greatly reduced peak of heat release rate, peak of carbon monoxide production rate and peak of carbon dioxide production rate of TPU by 50.1%, 52.1% and 55.4%, respectively. Furthermore, the cotton/TPU hierarchical composites possessed the EMI shielding effectiveness of 40.0 dB in the X band and 54.6 dB in the K band. The mechanical property of the cotton/TPU hierarchical composites was also reinforced, where the elongation at break and toughness values of the TPU/SCF/mLDH1/C2 hierarchical composite were 21.47 and 18.30 times higher than those of pure TPU, respectively. These mechanically strong hierarchical composites have brought a promising attempt to broaden their practical application, removing the fire hazards and electromagnetic waves radiation from the environment.

Photothermal Superhydrophobic Chitosan-Based Cotton Fabric for Rapid Deicing and Oil/Water Separation

Superhydrophobic cotton fabrics have a lot of potential for use in practical settings. The majority of superhydrophobic cotton fabrics, however, only serve one purpose and are made from fluoride or silane chemicals. Therefore, it remains a challenge to develop multifunctional superhydrophobic cotton fabrics using environmentally friendly raw materials. In this study, chitosan (CS), amino carbon nanotubes (ACNTs), and octadecylamine (ODA) were used as raw materials to create CS-ACNTs-ODA photothermal superhydrophobic cotton fabrics. The cotton fabric that was created showed a remarkable superhydrophobic property with a water contact angle of 160.3°. The surface temperature of CS-ACNTs-ODA cotton fabric can rise by up to 70 °C when exposed to simulated sunlight, demonstrating the fabric's remarkable photothermal capabilities. Additionally, the coated cotton fabric is capable of quick deicing. Ice particles (10 μL) melted and began to roll down in 180 s under the light of "1 sun". The cotton fabric exhibits good durability and adaptability in terms of mechanical qualities and washing tests. Moreover, the CS-ACNTs-ODA cotton fabric displays a separation efficacy of more than 91% when used to treat various oil and water mixtures. We also impregnate the coating on polyurethane sponges, which can quickly absorb and separate oil and water mixtures.

Improving the hygroscopicity and flame retardancy of polyamide 6 fabrics by surface coating with β-FeOOH and sulfamic acid

The combustion of polyamide 6 (PA6) fabrics releases toxic smoke, which will pollute the environment and threaten human life and health. Herein, a novel eco-friendly flame-retardant coating was constructed and applied to PA6 fabrics. Needle-like β-FeOOH with a high surface area was firstly constructed onto the surface of PA6 fabrics by the hydrolysis of Fe³⁺, sulfamic acid (SA) was then introduced by a facile dipping and nipping method. The growth of β-FeOOH also endowed the PA6 fabrics with certain hydrophilicity and moisture permeability, resulting in improved comfortability. The limiting oxygen index (LOI) of the prepared PA6/Fe/6SA sample was increased to 27.2% from 18.5% of control PA6 sample, and the damaged length was reduced to only 6.0 cm from 12.0 cm of control PA6 sample. Meanwhile, the melt dripping was also eliminated. The heat release rate and total heat release values of the PA6/Fe/6SA sample were decreased to 318.5 kW/m² and 17.0 MJ/m², respectively, compared with those of control PA6 (494.7 kW/m² and 21.4 MJ/m²). The analysis results indicated that nonflammable gases diluted flammable gases. The observation of char residues demonstrated that the stable char layer was formed, which effectively inhibited the transfer of heat and oxygen. The organic solvent-free coating does not contain any conventional halogens/phosphorus elements, which provides a useful methodology to produce environmentally friendly flame-retardant fabrics.

Magnetic polyborate nanoparticles as a green and efficient catalyst for one-pot four-component synthesis of highly substituted imidazole derivatives

In this study, magnetic polyborate nanoparticles (MPBNPs) were prepared via a simple procedure from boric acid by using ball-milling and then characterized by various spectroscopic, microscopic and analytical methods including FT-IR, EDX, XRD, FESEM, VSM and TGA analysis. The obtained MPBNPs were further explored, as a green and highly efficient catalyst, in the multi-component synthesis of a wide range of tetra-substituted imidazoles from cascade cyclocondensation as well as in situ air oxidation of benzil or benzoin, aromatic aldehydes, primary amine and ammonium acetate in EtOH, as a green solvent, under reflux conditions. Additionally, environmentally friendly conditions for the preparation of the catalyst by the use of non-toxic reactants, facile procedure and high to excellent yields of the desired products as well as the use of a green solvent are some advantages of this new protocol.

Green and sustainable fabrication of a durable superhydrophobic cotton fabric with self-cleaning properties

The use of more toxic reagents in the finishing of superhydrophobic cotton fabrics is one of the main factors that limit the application of the fabrics. Therefore, a green and sustainable method for preparing superhydrophobic cotton fabrics is urgently needed. In this study, a cotton fabric was etched with phytic acid (PA), which can be extracted from plants, effectively improving the surface roughness of the fabric. Subsequently, the treated fabric was coated with epoxidized soybean oil (ESO)-derived thermosets and then covered with stearic acid (STA). The finished cotton fabric exhibited excellent superhydrophobic properties, with a water contact angle of 156.3°. The superhydrophobic coatings of the finished cotton fabric endowed the fabric with excellent self-cleaning properties, irrespective of the liquid pollutant or solid dust. In addition, the inherent properties of the finished fabric were largely retained after the modification. Therefore, the finished cotton fabric with excellent self-cleaning properties has great potential for applications in the household and clothing fields.

Environmental benign foam finishing with a hyperbranched polyphosphonate flame retardant for polyethylene terephthalate fabric

It is still a big challenge for textile industry in improving fire resistance and reducing melt dripping with minimal loss on the physical properties of polyethylene terephthalate (PET) fabrics. In this work, a highly-effective hyperbranched flame retardant (DT) was first synthesized by ester exchange without using any organic solvent. Then, the DT foam was prepared and blade coated on PET fabric to improve the fire performance. The prepared PET fabric with only 2.7% weight gain of DT was self-extinguished and did not produce any molten dripping during the vertical flammable test. The peak heat release rate and total heat release of the PET fabric sample with 19.4% DT were decreased by 42.0% and 57.1%, respectively compared with that of the control PET. Besides, the as-prepared PET fabric sample showed better physical properties such as breaking strength, vapor permeability, air permeability, antistatic property, and softness than the control PET fabric sample. The DT foam finishing process did not involve any organic solvent and consumed less water and energy compared with conventional fabric treatments. It is expected that this work provides a facile and eco-friendly strategy for fabricating flame retardant PET fabric with excellent comprehensive performances.

Construction of hydrophobic fire retardant coating on cotton fabric using a layer-by-layer spray coating method

Multifunctional cotton fabric was prepared through a two-step layer-by-layer spray coating method, where the first layer of the coating comprising chitosan and ammonium phytate provided fire retardancy, and the second one with PDMS-ZnO composite imparted hydrophobicity to the fabric. A molecular dynamics (MD) simulation study was carried out to calculate interfacial adhesion of different components of the coating, based on which the sequencing of the coating layers was determined and used to prepare coated samples. The coated fabric demonstrated a significant improvement in fire retardancy through an increase in LOI from 18 % in control to 30 %, a reduction in char length from 30 cm to 7 cm, and a decrease in peak and total heat release rate values by 75 % and 33 %, respectively. The hydrophobicity of coated fabric was tested via water drop test where coated sample maintained a contact angle of 148° for up to 120 s, while the control sample showed 0°.

Facile Fabrication of Superhydrophobic and Flame-Retardant Coatings on Cotton Fabrics

The hydrophilicity and inherent flammability of cotton textiles severely limit their usage. To solve these drawbacks, a superhydrophobic and flame-retardant (SFR) coating made of chitosan (CH), ammonium polyphosphate (APP), and TiO₂-SiO₂-HMDS composite was applied to cotton fabric using simple layer-by-layer assembly and dip-coating procedures. First, the fabric was alternately immersed in CH and APP water dispersions, and then immersed in TiO₂-SiO₂-HMDS composite to form a CH/APP@TiO₂-SiO₂-HMDS coating on the cotton fabric surface. SEM, EDS, and FTIR were used to analyze the surface morphology, element composition, and functional groups of the cotton fabric, respectively. Vertical burning tests, microscale combustion calorimeter tests, and thermogravimetric analyses were used to evaluate the flammability, combustion behavior, thermal degradation characteristics, and flame-retardant mechanism of this system. When compared to the pristine cotton sample, the deposition of CH and APP enhanced the flame retardancy, residual char, heat release rate, and total heat release of the cotton textiles. The superhydrophobic test results showed that the maximal contact angle of SFR cotton fabric was 153.7°, and possessed excellent superhydrophobicity. Meanwhile, the superhydrophobicity is not lost after 10 laundering cycles or 50 friction cycles. In addition, the UPF value of CH/APP@TiO₂-SiO₂-HMDS cotton was 825.81, demonstrating excellent UV-shielding properties. Such a durable SFR fabric with a facile fabrication process exhibits potential applications for both oil/water separation and flame retardancy.

Fiber-based photothermal, UV-resistant, and self-cleaning coatings fabricated by silicon grafted copolymers of chitosan derivatives and gallic acid

Superhydrophobic and hydrophobic properties are generally created by adopting low surface free energy materials. Therefore, most studies have focused on creating surface hydrophobicity by using hydrophobic or fluorinated materials. However, few studies are reported on realizing surface hydrophobicity by directly introducing hydrophilic molecules, which is also a challenge. Herein, with platinum nanozyme as the catalyst, the novel hydrophobic coatings have been rapidly gained via anchoring the polymer of hydrophilic gallic acid and chitosan or chitosan quaternary ammonium salt onto cotton fabric surface. Notably, the novel hydrophobic coatings exhibit significant advances compared with conventional hydrophobic ones created by utilizing fluorinated or hydrophobic materials, which breaks the limitation of employing low surface energy materials for gaining surface hydrophobicity. Subsequently, the sodium methyl silicate was grafted on the polymer's coatings to strengthen surface hydrophobicity and the abrasion resistance of hydrophobicity. Interestingly, the heating could induce the hydrophilicity of cotton fabric to recover to hydrophobicity. Moreover, the hydrophobic coatings also possess good photothermal conversion, UV resistance, and anti-oxidation activity for self-cleaning application and oil water separation. Briefly, the present work may open a new direction for preparing novel hydrophobic coatings by combining gallic acid and chitosan-based macromolecular carbohydrates.

A Facile Immobilization Strategy for Soluble Phosphazene to Actualize Stable and Safe Lithium-Sulfur Batteries

Lithium-sulfur batteries (LSBs) have attracted extensive attention owing to their high energy density and abundant sulfur resources. However, LSBs are still restricted by the unsatisfactory electrochemical performance resulting from the shuttle effect of lithium polysulfide (LiPSs), and the potential fire hazard caused by inflammable ether electrolytes and polyolefin separators. Herein, a facile immobilization strategy for hexachlorocyclotriphosphazene (HCCP) is creatively applied to address the above issues simultaneously. Insoluble HCCP cross-linked microspheres (H-CMP) are firstly obtained at ambient temperature using tannic acid (TA) as a cross-linking agent and then a multifunctional separator coating is constructed based on H-CMP. The released phosphorus-related radicals from H-CMP in wide temperatures effectively prevent the combustion of electrolytes and separators, and hence improve the fire safety of the Li-S pouch cell. Furthermore, H-CMP availably chemisorbs LiPSs to interdict the shuttle effect, thereby dramatically improving the electrochemical performance of LSBs. The effectiveness of this strategy is also verified in high sulfur loading (6.38 mg cm^-2 ), high temperature (50 °C), and Li-S pouch cells. More importantly, H-CMP exhibits sufficient stability for Li metal and suppression of Li dendrites. This facile immobilization strategy for multifunctional phosphazenes provides a competitive option for the large-scale fabrication of high-safety and high-performance LSBs.