Integration of image guidance and rapid prototyping technology in craniofacial surgery

Clinical situations for which 3D printing is considered an appropriate representation or extension of data contained in a medical imaging examination: neurosurgical and otolaryngologic conditions

BACKGROUND

Medical three dimensional (3D) printing is performed for neurosurgical and otolaryngologic conditions, but without evidence-based guidance on clinical appropriateness. A writing group composed of the Radiological Society of North America (RSNA) Special Interest Group on 3D Printing (SIG) provides appropriateness recommendations for neurologic 3D printing conditions.

METHODS

A structured literature search was conducted to identify all relevant articles using 3D printing technology associated with neurologic and otolaryngologic conditions. Each study was vetted by the authors and strength of evidence was assessed according to published guidelines.

RESULTS

Evidence-based recommendations for when 3D printing is appropriate are provided for diseases of the calvaria and skull base, brain tumors and cerebrovascular disease. Recommendations are provided in accordance with strength of evidence of publications corresponding to each neurologic condition combined with expert opinion from members of the 3D printing SIG.

CONCLUSIONS

This consensus guidance document, created by the members of the 3D printing SIG, provides a reference for clinical standards of 3D printing for neurologic conditions.

Application of 3D printing technology combined with PBL teaching model in teaching clinical nursing in congenital heart surgery: A case-control study

We aimed to explore the application of three-dimensional (3D) printing technology with problem-based learning (PBL) teaching model in clinical nursing education of congenital heart surgery, and to further improve the teaching quality of clinical nursing in congenital heart surgery. In this study, a total of 132 trainees of clinical nursing in congenital heart surgery from a grade-A tertiary hospital in 2019 were selected and randomly divided into 3D printing group or traditional group. The 3D printing group was taught with 3D printed heart models combined with PBL teaching technique, while the traditional group used conventional teaching aids combined with PBL technique for teaching. After the teaching process, the 2 groups of nursing students were assessed and surveyed separately to evaluate the results. Compared to the traditional group, the theoretical scores, clinical nursing thinking ability, self-evaluation for comprehensive ability, and teaching satisfaction from the questionnaires filled by the 3D printing group were all higher than the traditional group. The difference was found to be statistically significant (P < .05). Our study has shown the 3D printing technology combined with the PBL teaching technique in the clinical nursing teaching of congenital heart surgery achieved good results.

Using Cranial Sutures in a Single-Step Frame-Guided Resection and Reconstruction for Intraosseous Meningiomas: Technical Note

BACKGROUND

Single-stage surgical treatment of cranial intraosseous meningiomas includes complete tumor resection followed by aesthetic reconstruction. Tailored tumor resection with a computer-aided design/computer-aided manufacturing custom-made implant for the defect has been advocated in recent years to achieve a satisfactory cosmetic result with reduced operative time and fewer complications. However, several technical nuances related to the area of osseous removal may compromise cranioplasty.

METHODS

We present 2 cases of intraosseous meningiomas (sphenoid wing and retromastoid) to illustrate a step-by-step approach, from preoperative planning to single-step surgery.

RESULTS

For each case, a customized frame template delimiting bone removal was designed using cranial sutures as anatomical landmarks for precise placement of the cranioplasty template over the area of interest.

CONCLUSIONS

Custom templates based in cranial sutures may benefit single-step frame-guided resection and reconstruction of intraosseous tumors with compelling results.

Radiological Society of North America (RSNA) 3D printing Special Interest Group (SIG): guidelines for medical 3D printing and appropriateness for clinical scenarios

Medical three-dimensional (3D) printing has expanded dramatically over the past three decades with growth in both facility adoption and the variety of medical applications. Consideration for each step required to create accurate 3D printed models from medical imaging data impacts patient care and management. In this paper, a writing group representing the Radiological Society of North America Special Interest Group on 3D Printing (SIG) provides recommendations that have been vetted and voted on by the SIG active membership. This body of work includes appropriate clinical use of anatomic models 3D printed for diagnostic use in the care of patients with specific medical conditions. The recommendations provide guidance for approaches and tools in medical 3D printing, from image acquisition, segmentation of the desired anatomy intended for 3D printing, creation of a 3D-printable model, and post-processing of 3D printed anatomic models for patient care.

Classification of the Residual Cranial Defects and Selection of Reconstruction Materials

The cranial defects are complex in nature and are due to various causes. Therefore, there is a need for a common term of reference to these defects. This requirement stood as a prime reason for proposing a classification system for cranial defects. The classification is based on 2 decades of experience in cranioplasty. This efficient and simple way of representation would fill the existing lacunae for a systematic communication on cranial defects. Over the ages the evolution of reconstruction and grafting had undergone a massive progress. Therefore, it is essential to enumerate all available graft and bio-materials for restoring the cranial defects. The aetiology for these defects, age and sex of the patient, site and size of the defect, associated systemic conditions, cost factor, and operator's choice are the factors that play key role in the selection of the reconstructive material. This article discusses on these factors in cranioplasty. High success rate with excellent function and cosmetic outcome in using a variety of materials, as shared in this article. The advantages of autografts cannot be matched by any existing alloplast. However, in case of larger defects, for a better cosmetic outcome and to reduce the donor site morbidity, alloplasts are the most widely preferred material of choice.

Reconstruction of Frontal Bone With Custom-Made Prosthesis Using Rapid Prototyping

Frontal bone fracture treatment is still an issue of research in craniofacial surgery and neurosurgery. The aims of the treatment are to reduce the complication risks and to keep the aesthetic of the face. Before the management of this fracture type, it is necessary to consider the permanence or not of the frontal sinus function. Rapid prototyping has been an aid tool on planning and simulation of the surgical procedure, improving the diagnostic quality and the implant manufacture, beyond reducing the operative time. Among the used materials on treatment of these fractures, titanium mesh shows large versatility and ease of handling. Poly(methyl methacrylate) has been used in defects of partial thickness or irregularities on cranial surface. The aim of this study is to report a case of a patient presenting sequelae of large fracture of anterior wall of frontal bone, treated by a titanium mesh associated with the customized poly(methyl methacrylate) implant from the rapid prototyping. It could be concluded that the use of this technique showed itself effective on patient treatment, and rapid prototyping demonstrated being a valuable tool showing predictable and satisfactory results.

A low invasiveness patient’s specific template for spine surgery

Free-hand pedicle screw placement is still conventional in surgery, although it has potentially high risks. The surgical procedures such as pedicle screw placement are usually designed based on medical imaging, but during surgery, the procedures are not normally followed due to the fact that some points are missed in two-dimensional images and seen only during surgery. In this regards, some highly accurate computer-assisted systems have been proposed and are currently used. Moreover, it is possible to reduce or completely avoid hand working by applying modern digital technology. Therefore, using these technologies has remarkable advantages. In this study, we have presented a new approach of pedicle screw placement in the lumbar and sacral regions using a specific drill guide template. The template was created by additive manufacturing technology and was verified in a clinical study as well. The main aim of this research includes the following: design, analyze, manufacture and evaluate the accuracy of a new patient-specific drill guide template, for lumbar pedicle screw placement, and compare the template to the free-hand technique under fluoroscopy supervision. Our results show that the incidence of cortex perforation is substantially reduced compared to existing methods. Finally, we believe that this approach remarkably lowers the incidence of cortex perforation and could be potentially used in clinical applications, particularly in certain selected cases.

Medical 3D Printing for the Radiologist

While use of advanced visualization in radiology is instrumental in diagnosis and communication with referring clinicians, there is an unmet need to render Digital Imaging and Communications in Medicine (DICOM) images as three-dimensional (3D) printed models capable of providing both tactile feedback and tangible depth information about anatomic and pathologic states. Three-dimensional printed models, already entrenched in the nonmedical sciences, are rapidly being embraced in medicine as well as in the lay community. Incorporating 3D printing from images generated and interpreted by radiologists presents particular challenges, including training, materials and equipment, and guidelines. The overall costs of a 3D printing laboratory must be balanced by the clinical benefits. It is expected that the number of 3D-printed models generated from DICOM images for planning interventions and fabricating implants will grow exponentially. Radiologists should at a minimum be familiar with 3D printing as it relates to their field, including types of 3D printing technologies and materials used to create 3D-printed anatomic models, published applications of models to date, and clinical benefits in radiology. Online supplemental material is available for this article.

Advantages and disadvantages of 3-dimensional printing in surgery: A systematic review

BACKGROUND

Three-dimensional (3D) printing is becoming increasingly important in medicine and especially in surgery. The aim of the present work was to identify the advantages and disadvantages of 3D printing applied in surgery.

METHODS

We conducted a systematic review of articles on 3D printing applications in surgery published between 2005 and 2015 and identified using a PubMed and EMBASE search. Studies dealing with bioprinting, dentistry, and limb prosthesis or those not conducted in a hospital setting were excluded.

RESULTS

A total of 158 studies met the inclusion criteria. Three-dimensional printing was used to produce anatomic models (n = 113, 71.5%), surgical guides and templates (n = 40, 25.3%), implants (n = 15, 9.5%) and molds (n = 10, 6.3%), and primarily in maxillofacial (n = 79, 50.0%) and orthopedic (n = 39, 24.7%) operations. The main advantages reported were the possibilities for preoperative planning (n = 77, 48.7%), the accuracy of the process used (n = 53, 33.5%), and the time saved in the operating room (n = 52, 32.9%); 34 studies (21.5%) stressed that the accuracy was not satisfactory. The time needed to prepare the object (n = 31, 19.6%) and the additional costs (n = 30, 19.0%) were also seen as important limitations for routine use of 3D printing.

CONCLUSION

The additional cost and the time needed to produce devices by current 3D technology still limit its widespread use in hospitals. The development of guidelines to improve the reporting of experience with 3D printing in surgery is highly desirable.

"Advances in the surgical management of bone tumors"

Bone tumor surgery is extremely challenging, particularly when tumors are located in tightly confined anatomical areas and abutting critical organs and neurovascular structures. Tumor resection requires good cutting accuracy to ensure safety, to achieve negative margins, and to preserve critical structures when possible. The purpose of this paper was to review the literature on the surgical advances for bone tumor surgery published within the last year. The majority of literature identified focused on computer-assisted surgical approaches. There is increasing evidence that 3D navigation plays an important role in the resection of bone tumors. Reconstruction materials that encourage healing and prevent infections are also in development. Optimal care includes execution of a well-developed pre-operative plan using a multidisciplinary approach led by the orthopaedic oncologist.