Effect of the compaction parameters on the final structure and properties of a press-coated tablet (Tab-in-Tab): Experimental and numerical study of the influence of core and shell dimensions

The effect of granules characters on mechanical properties of press-coated tablets: A comparative study

The aim of this study was to investigate the correlation between critical granules characters (including particle size, surface roughness, and apparent porosity) and mechanical properties of press-coated tablets. Granules of a model formulation were prepared through Roll Compaction Granulation (RCG), High Shear Granulation (HSG), and Fluidized Bed Granulation (FBG) to prepare granules with different surface roughness and apparent porosity. The surface roughness and porosity of granules had a significantly greater effect on mechanical properties than the particle size of granules. Whether for brittle or plastic materials, FBG granules with the roughest surface and the greatest apparent porosity exhibited the best compression properties. The elastic recovery test, the interlayer adhesion forces study, the break pattern test, and the X-ray microcomputed tomography investigation suggested that granules with great apparent porosity and rough surfaces could contribute to the production of stable press-coated structures. Moreover, for press-coated tablets prepared using granules, the proper granules in the coat layer could eliminate the side effect of the rigid core on the mechanical strength. The above understandings will be conducive to the selection of compatible and appropriate granules characters, which can enhance mechanical properties and extend the application of press-coated tablets.

Influence of the punch shape on the core and shell structure of press-coated tablets

Press-coated tablets are a key technology to achieve delayed releases in chronotherapeutics. The drug release properties of this kind of tablets are linked to its unique core-shell structure. It is thus important to understand the influence of the process parameters on this structure. As different shapes can be used in the industry, we focused, in this study, on understanding the influence of punch shape on the final structure of a press-coated tablet. Experiments were performed using flat, bevel-edged and concave punches for the coating-compression to study the effect of the punch shape on the final properties of the core but also on the density distribution in the shell. The experiments were supported by numerical simulation to understand the mechanical effects in the powder compression process. It was found that the radial and axial stress state in the shell and in the core during compression is very dependent on the punch shape. The use of concave punches results in a more hydrostatic stress state compared to flat punches. The consequences on the structure are a more homogenous shell and less deformation of the core, which confirms that the tooling shape is a critical parameter to consider for the production of press-coated tablets.

Breaking patterns of press-coated tablets during the diametral compression test: Influence of the product, geometry and process parameters

Press-coated tablets are a high-interest technology in chronopharmaceutics, for modified release applications. As for any kind of tablet, the test of the mechanical resistance is of primary importance at the industrial level during both the development and production steps. For this purpose, the diametral compression test is commonly used in the industry for press-coated tablets. Nevertheless, the result of this test can be much more complex compared to the case of single layer tablets. This work aims to study the applicability of this test to press-coated tablets. Diametral compression tests were performed on press-coated tablets obtained with different products (shell/core), shell sizes and compaction pressures. Four types of breaking profiles were found: total diametral, shell diametral, around the core and laminated depending on the process parameters/products used to obtain the tablet. Digital image correlation was used in order to understand the breaking patterns especially in terms of failure initiation and propagation. The kind of breaking pattern obtained is dependent on the final structure of the tablet in terms of density distribution and thus of elastic properties. To confirm the findings, numerical simulations by the finite element method was used to visualize the stress distribution inside the tablet and confirm the influence of the process parameters. The multiple failure profiles obtained imply that the output value of the diametral compression test applied to press-coated tablets should be taken with caution.