Characterization of polyvinyl alcohol hydrogels as tissue-engineered cartilage scaffolds using a coupled finite element-optimization algorithm

Computational methods for biofabrication in tissue engineering and regenerative medicine - a literature review

This literature review rigorously examines the growing scientific interest in computational methods for Tissue Engineering and Regenerative Medicine biofabrication, a leading-edge area in biomedical innovation, emphasizing the need for accurate, multi-stage, and multi-component biofabrication process models. The paper presents a comprehensive bibliometric and contextual analysis, followed by a literature review, to shed light on the vast potential of computational methods in this domain. It reveals that most existing methods focus on single biofabrication process stages and components, and there is a significant gap in approaches that utilize accurate models encompassing both biological and technological aspects. This analysis underscores the indispensable role of these methods in understanding and effectively manipulating complex biological systems and the necessity for developing computational methods that span multiple stages and components. The review concludes that such comprehensive computational methods are essential for developing innovative and efficient Tissue Engineering and Regenerative Medicine biofabrication solutions, driving forward advancements in this dynamic and evolving field.

A review of bioengineering techniques applied to breast tissue: Mechanical properties, tissue engineering and finite element analysis

Female breast cancer was the most prevalent cancer worldwide in 2020, according to the Global Cancer Observatory. As a prophylactic measure or as a treatment, mastectomy and lumpectomy are often performed at women. Following these surgeries, women normally do a breast reconstruction to minimize the impact on their physical appearance and, hence, on their mental health, associated with self-image issues. Nowadays, breast reconstruction is based on autologous tissues or implants, which both have disadvantages, such as volume loss over time or capsular contracture, respectively. Tissue engineering and regenerative medicine can bring better solutions and overcome these current limitations. Even though more knowledge needs to be acquired, the combination of biomaterial scaffolds and autologous cells appears to be a promising approach for breast reconstruction. With the growth and improvement of additive manufacturing, three dimensional (3D) printing has been demonstrating a lot of potential to produce complex scaffolds with high resolution. Natural and synthetic materials have been studied in this context and seeded mainly with adipose derived stem cells (ADSCs) since they have a high capability of differentiation. The scaffold must mimic the environment of the extracellular matrix (ECM) of the native tissue, being a structural support for cells to adhere, proliferate and migrate. Hydrogels (e.g., gelatin, alginate, collagen, and fibrin) have been a biomaterial widely studied for this purpose since their matrix resembles the natural ECM of the native tissues. A powerful tool that can be used in parallel with experimental techniques is finite element (FE) modeling, which can aid the measurement of mechanical properties of either breast tissues or scaffolds. FE models may help in the simulation of the whole breast or scaffold under different conditions, predicting what might happen in real life. Therefore, this review gives an overall summary concerning the human breast, specifically its mechanical properties using experimental and FE analysis, and the tissue engineering approaches to regenerate this particular tissue, along with FE models.

Design and Simulation of the Biomechanics of Multi-Layered Composite Poly(Vinyl Alcohol) Coronary Artery Grafts

Coronary artery disease is among the primary causes of death worldwide. While synthetic grafts allow replacement of diseased tissue, mismatched mechanical properties between graft and native tissue remains a major cause of graft failure. Multi-layered grafts could overcome these mechanical incompatibilities by mimicking the structural heterogeneity of the artery wall. However, the layer-specific biomechanics of synthetic grafts under physiological conditions and their impact on endothelial function is often overlooked and/or poorly understood. In this study, the transmural biomechanics of four synthetic graft designs were simulated under physiological pressure, relative to the coronary artery wall, using finite element analysis. Using poly(vinyl alcohol) (PVA)/gelatin cryogel as the representative biomaterial, the following conclusions are drawn: (I) the maximum circumferential stress occurs at the luminal surface of both the grafts and the artery; (II) circumferential stress varies discontinuously across the media and adventitia, and is influenced by the stiffness of the adventitia; (III) unlike native tissue, PVA/gelatin does not exhibit strain stiffening below diastolic pressure; and (IV) for both PVA/gelatin and native tissue, the magnitude of stress and strain distribution is heavily dependent on the constitutive models used to model material hyperelasticity. While these results build on the current literature surrounding PVA-based arterial grafts, the proposed method has exciting potential toward the wider design of multi-layer scaffolds. Such finite element analyses could help guide the future validation of multi-layered grafts for the treatment of coronary artery disease.

Characterization and comparison of hyper-viscoelastic properties of normal and osteoporotic bone using stress-relaxation experiment

Bone tissue behavior under various loads is nonlinear elastic due to irreversible energy absorption. Also, viscoelasticity is one of the most important properties of bone which is very important in dynamic analyses and helps a lot in making artificial bone. In this study, rat tibia bone specimens were subjected to compression stress-relaxation test for normal (n = 5) and osteoporotic (n = 5) groups in order to characterize their mechanical properties using finite element modeling coupled with an optimization algorithm. Using this method, the structural equation parameters for the Neo-Hookean model and the Prony series coefficients were used to describe the hyper-elastic and the viscoelastic behavior of specimens, respectively; moreover, the properties of materials including the bulk, shear and Young's moduli for both groups were obtained and compared. The shear modulus was also gained as a function of time. In addition, the percentage of stress reduction and its relation to the initial stress were investigated for specimens. Finally, the effect of changes in each of the parameters of the hyper-viscoelastic structural equation on the force response was determined. Results of this study can be used in predicting the transient response and dynamic analysis of the bone.

Chitosan/polycaprolactone multilayer hydrogel: A sustained Kartogenin delivery model for cartilage regeneration

Cartilage regeneration using biomaterial-guided delivery systems presents improved therapeutic efficacy of the biomolecules while minimizing side effects. Here, our hypothesis was to design a multilayer scaffold of chitosan (CS) hydrogel and polycaprolactone (PCL) mat to enhance the mechanical properties, integrity and stability of CS, especially for subsequent in vivo transplantation. After conjugation of the Kartogenin (KGN) into this structure, its gradual release can promote chondrogenesis of mesenchymal stem cells (MSCs). Initially, a thin electrospun PCL layer was sandwiched between two CS hydrogels. Subsequently, KGN was superficially immobilized onto the CS matrix. The successful conjugation was confirmed by scanning electron microscopy (SEM) and infrared spectroscopy. These novel KGN-conjugated scaffolds possessed lower swelling and higher compressive modulus and showed gradual release of KGN in longer retention times. Immunofluorescent and histological staining represented more cells located in lacunae as well as more Coll2 and Sox9 positive cells on KGN-conjugated scaffolds. Gene expression analysis also revealed that SOX9, COLL2 and ACAN expression levels were higher in the presence of KGN, while COLLX expression was down-regulated, indicating a hypertrophy phenomenon with synergistic effect of TGF-β. This multilayer structure not only facilitates the effective treatment, but also provides a proper mechanical structure for cartilage engineering.

A time-dependent mechanobiology-based topology optimization to enhance bone growth in tissue scaffolds

Scaffold-based bone tissue engineering has been extensively developed as a potential means to treatment of large bone defects. To enhance the biomechanical performance of porous tissue scaffolds, computational design techniques have gained growing popularity attributable to their compelling efficiency and strong predictive features compared with time-consuming trial-and-error experiments. Nevertheless, the mechanical stimulus necessary for bone regeneration, which characterizes dynamic nature due to continuous variation in the bone-scaffold construct system as a result of bone-ingrowth and scaffold biodegradation, is often neglected. Thus, this study proposes a time-dependent mechanobiology-based topology optimization framework for design of tissue scaffolds, thereby developing an ongoing favorable microenvironment and ensuring a long-term outcome for bone regeneration. For the first time, a level-set based topology optimization algorithm and a time-dependent shape derivative are developed to optimize the scaffold architecture. In this study, a large bone defect in a simulated 2D femur model and a partial defect in a 3D femur model are considered to demonstrate the effectiveness of the proposed design method. The results are compared with those obtained from stiffness-based topology optimization, time-independent design and typical scaffold constructs, showing significant advantages in continuing bone ingrowth outcomes.