Pickering emulsions stabilized by surface-modified Fe3O4 nanoparticles

Progress of Drug Nanocrystal Self-Stabilized Pickering Emulsions: Construction, Characteristics In Vitro, and Fate In Vivo

A drug nanocrystal self-stabilized Pickering emulsion (DNSPE) is a novel Pickering emulsion with drug nanocrystals as the stabilizer. As a promising drug delivery system, DNSPEs have attracted increasing attention in recent years due to their high drug loading capacity and ability to reduce potential safety hazards posed by surfactants or specific solid particles. This paper comprehensively reviews the progress of research on DNSPEs, with an emphasis on the main factors influencing their construction, characteristics and measurement methods in vitro, and fate in vivo, and puts forward issues that need to be studied further. The review contributes to the advancement of DNSPE research and the promotion of their application in the field of drug delivery.

Assembly and manipulation of responsive and flexible colloidal structures by magnetic and capillary interactions

The long-ranged interactions induced by magnetic fields and capillary forces in multiphasic fluid-particle systems facilitate the assembly of a rich variety of colloidal structures and materials. We review here the diverse structures assembled from isotropic and anisotropic particles by independently or jointly using magnetic and capillary interactions. The use of magnetic fields is one of the most efficient means of assembling and manipulating paramagnetic particles. By tuning the field strength and configuration or by changing the particle characteristics, the magnetic interactions, dynamics, and responsiveness of the assemblies can be precisely controlled. Concurrently, the capillary forces originating at the fluid-fluid interfaces can serve as means of reconfigurable binding in soft matter systems, such as Pickering emulsions, novel responsive capillary gels, and composites for 3D printing. We further discuss how magnetic forces can be used as an auxiliary parameter along with the capillary forces to assemble particles at fluid interfaces or in the bulk. Finally, we present examples how these interactions can be used jointly in magnetically responsive foams, gels, and pastes for 3D printing. The multiphasic particle gels for 3D printing open new opportunities for making of magnetically reconfigurable and "active" structures.

Probing the Mechanism of Targeted Delivery of Molecular Surfactants Loaded into Nanoparticles after Their Assembly at Oil-Water Interfaces

A targeted and controlled delivery of molecular surfactants at oil-water interfaces using the directed assembly of nanoparticles, NPs, is reported. The mechanism of NP assembly at the interface and the release of molecular surfactants is followed by laser scanning confocal microscopy and surface force spectroscopy. The assembly of positively charged polystyrene NPs at the oil-water interface was facilitated by the introduction of carboxylic acid groups in the oil phase (e.g., by adding 1 wt % stearic acid to hexadecane to produce a model oil). The presence of positively charged NPs consistently lowers the stiffness of the water-oil interface. The effect is lessened, when the NPs are present in a solution of NaCl or deionized water at pH 2, consistent with a less dense monolayer of NPs at the interface in the last two systems. In addition, the NPs reduce the interfacial adhesion (i.e., the "stickiness" of the interface or, put differently, the pull-off force experienced by the atomic force microscopy (AFM) tip during retraction). After the assembly, the NPs can release a previously loaded cargo of surfactant molecules, which then facilitate the formation of a much finer oil-water emulsion. As a proof of concept, we demonstrate the release of octadecyl amine, ODA, that has been incorporated into the NPs prior to the assembly. The release of ODA causes the NPs to detach from the interface altering the interfacial properties and leads to finer oil droplets. This approach can be exploited in applications in several fields ranging from pharmaceutical and cosmetics to hydrocarbon recovery and oil-spill remediation, where a targeted and controlled release of surfactants is wanted.

Artificial Cells: Past, Present and Future

Artificial cells are constructed to imitate natural cells and allow researchers to explore biological process and the origin of life. The construction methods for artificial cells, through both top-down or bottom-up approaches, have achieved great progress over the past decades. Here we present a comprehensive overview on the development of artificial cells and their properties and applications. Artificial cells are derived from lipids, polymers, lipid/polymer hybrids, natural cell membranes, colloidosome, metal-organic frameworks and coacervates. They can be endowed with various functions through the incorporation of proteins and genes on the cell surface or encapsulated inside of the cells. These modulations determine the properties of artificial cells, including producing energy, cell growth, morphology change, division, transmembrane transport, environmental response, motility and chemotaxis. Multiple applications of these artificial cells are discussed here with a focus on therapeutic applications. Artificial cells are used as carriers for materials and information exchange and have been shown to function as targeted delivery systems of personalized drugs. Additionally, artificial cells can function to substitute for cells with impaired function. Enzyme therapy and immunotherapy using artificial cells have been an intense focus of research. Finally, prospects of future development of cell-mimic properties and broader applications are highlighted.

A Droplet-Manipulation Method Based on the Magnetic Particle-Stabilized Emulsion and Its Direct Numerical Simulation

Droplet manipulation has found broad applications in various engineering fields, such as microfluidic systems. This work reports a droplet-manipulation method based on particle-stabilized emulsions, where the magnetic particles adsorbed to the droplet surface serve as the actuator. The movement and the release of the droplet can be controlled by applying an external magnetic field. A lattice Boltzmann model for a three-phase system containing liquids and solid particles is adopted, which could provide a full coupling between fluids and particles. The effectiveness of the present droplet-manipulation method is validated through experiments and numerical simulations. Furthermore, the numerical simulation can provide insight into the interactions between the magnetic particles and the droplet during the droplet-driven process. To drive the droplet successfully, the magnetic particle needs to adhere to its surface and act as an "engine" to provide the driving force. As it is a surface-tension-dominant problem, the capillary effect can be considered as an "energy transfer station". The magnetic driving force on the particle is transmitted primarily to the droplet through interfacial capillary forces at the three-phase contact line, which assists the droplet in overcoming the viscous resistance and moving forward. A dimensionless number is proposed as a predictor of droplet transport and particle detachment.

Polystyrene Macroporous Magnetic Nanocomposites Synthesized through Deep Eutectic Solvent-in-Oil High Internal Phase Emulsions and Fe3O4 Nanoparticles for Oil Sorption

In this work, we report a nonaqueous one-step method to synthesize polystyrene macroporous magnetic nanocomposites through high internal phase emulsions (HIPEs) formulated with the deep eutectic solvent (DES) composed of urea:choline chloride (U:ChCl, in a 2:1 molar ratio) as the internal phase and co-stabilized with mixtures of Span 60 surfactant and non-functionalized magnetite nanoparticles (Fe₃O₄ NPs). The porous structure and the magnetic and lipophilic properties of the nanocomposite materials were easily tailored by varying the amount of Fe₃O₄ NPs (0, 2, 5 and 10 wt %) and the surfactant Span 60 (0, 5, 10, and 20 wt %) used in the precursor emulsion. The resultant nanocomposite polyHIPEs exhibit high sorption capacity toward different oils (hexane, gasoline, and vegetable oil) due to their high porosity, interconnectivity, and hydrophobic surface. It was observed that the oil sorption capacity was improved when the amount of surfactant decreased and Fe₃O₄ NPs increased in HIPE formulation. Therefore, polyHIPE formulated with 5 and 10 wt % Span 60 and Fe₃O₄ NPs, respectively, showed the highest oil sorption capacities of 4.151, 3.556, and 3.266 g g^-1 for gasoline, hexane, and vegetable oil, respectively. In addition, the magnetic monoliths were reused for more than ten sorption/desorption cycles without losing their oil sorption capacity.

Preparation and stabilization of Pickering emulsions by cationic cellulose nanocrystals synthesized from deep eutectic solvent

In this work, short rod-like cationic cellulose nanocrystals (AH-CNCs) were prepared by sodium periodate oxidation combined with deep eutectic solvent method. The effects of different content AH-CNCs on the properties of the emulsion were studied. With the increase of AH-CNCs content, the diameter of emulsion droplets decreased and the stabilization time prolonged. The electrostatic attraction between the negative charge accumulated at the oil-water interface and AH-CNCs with positive charge improved the stability of the emulsion. Then, the rheological properties showed the interaction of nanocellulose in the continuous phase increased the viscosity of the emulsion. In addition, the droplet diameter of emulsion of 120 s was smaller at different ultrasonic time, the particle size distribution of emulsion changed from monodisperse to polydisperse with the increase of oil volume, the salt concentration had little effect on the droplet size of emulsion, and the preparation of emulsion under acidic conditions was more stable.

Bifunctional folic-conjugated aspartic-modified Fe3O4 nanocarriers for efficient targeted anticancer drug delivery

Functionalization of nanocarriers has been considered the most promising way of ensuring an accurate and targeted drug delivery system. This study reports the synthesis of bifunctional folic-conjugated aspartic-modified Fe3O4 nanocarriers with an excellent ability to deliver doxorubicin (DOX), an anticancer drug, into the intercellular matrix. Here, the presence of amine and carboxylate groups enables aspartic acid (AA) to be used as an efficient anchoring molecule for the conjugation of folic acid (FA) (EDC-NHS coupling) and DOX (electrostatic interaction). Based on the results, surface functionalization showed little effect on the physicochemical properties of the nanoparticles but significantly influenced both the loading and release efficiency of DOX. This is primarily caused by the steric hindrance effect due to large and bulky FA molecules. Furthermore, in vitro MTT assay of B16-F1 cell lines revealed that FA conjugation was responsible for a significant increase in the cytotoxicity of DOX-loaded nanocarriers, which was also found to be proportional to AA concentration. This high cytotoxicity resulted from an efficient cellular uptake induced by the over-expressed folate receptors and fast pH triggered DOX release inside the target cell. Here, the lowest IC50 value of DOX-loaded nanocarriers was achieved at 2.814 ± 0.449 μg mL-1. Besides, further investigation also showed that the drug-loaded nanocarriers exhibited less or no toxicity against normal cells.

A Novel Functional Emulsifier Prepared with Modified Cassava Amylose with Octenyl Succinic Anhydride and Quercetin: Preparation and Application in the Pickering Emulsion

An emulsifier with a targeted antioxidant effect was prepared using the inclusion complexes of octenyl succinic anhydride (OSA)-modified cassava amylose (CA) and quercetin (Q). The designed emulsifier, a carbohydrate polymer-flavonoid complex, exhibited both amphiphilic and antioxidant properties. To investigate the physical and oxidation stabilities of the prepared emulsion, three types of emulsions were prepared: primary emulsions stabilized by enzyme-modified starch, secondary emulsions stabilized by OSA-CA, and tertiary emulsions stabilized by Q-encapsulated complexes (OSA-CA/Q). The structural characteristics of CA, OSA-CA, and OSA-CA/Q were investigated by scanning electron microscopy, Fourier transform infrared spectrometry, and small-angle X-ray scattering analysis. The stabilities of the emulsions were evaluated based on their particle size distribution, zeta potential, creaming stability, and peroxide value. The results showed that the secondary and tertiary emulsions exhibited a relatively narrower particle size distribution than the primary emulsions, but the particle size distribution of the tertiary emulsions was the narrowest (10.42 μm). Moreover, the secondary and tertiary emulsions had lower delamination indices than the primary emulsions after 7 days of storage. The results obtained from the antioxidant experiments indicated that OSA-CA/Q exhibited good oxidation stability for application in emulsion systems.

Pickering emulsions stabilized by some inorganic materials

The paper presents studies of various solid stabilizers of emulsions based on inorganic materials. Inorganic colloidal particles have an advantage for obtaining of stable emulsions due to their safety for use in food, cosmetics, pharmaceutical industry and medicine. Pickering emulsions have a higher biodegradability compared to classical emulsions stabilized with surfactants. An overview of inorganic substances such as silicon dioxide, clay materials, metal and metal oxide nanoparticles, calcium compounds and carbon particles used for stabilizing of Pickering emulsions is considered. A variety of solid inorganic particles as well as modification of their surfaces by surfactants allows to obtain the stable Pickering emulsions of different types for a wide range of applications. It should be noted that despite a large number of studies, this class of disperse systems is still not studied fully; various methods of their preparation and influence of solid particle size on stability and size of emulsions droplets are shown.

Recent advances of characterization techniques for the formation, physical properties and stability of Pickering emulsion

Recently, there have been increasing demand for the application of Pickering emulsions in various industries due to its combined advantage in terms of cost, quality and sustainability. This review aims to provide a complete overview of the available methodology for the physical characterization of emulsions that are stabilized by solid particles (known as Pickering emulsion). Current approaches and techniques for the analysis of the formation and properties of the Pickering emulsion were outlined along with the expected results of these methods on the emulsions. Besides, the application of modelling techniques has also been elaborated for the effective characterization of Pickering emulsions. Additionally, approaches to assess the stability of Pickering emulsions against physical deformation such as coalescence and gravitational separation were reviewed. Potential future developments of these characterization techniques were also briefly discussed. This review can act as a guide to researchers to better understand the standard procedures of Pickering emulsion assessment and the advanced methods available to date to study these emulsions, down to the minute details.

Preparation of porous adsorbent via Pickering emulsion template for water treatment: A review

Porous materials as emerging potential adsorbents have received much more attention because they are capable of capturing various pollutants with fast adsorption rate, high adsorption capacity, good selectivity and excellent reusability. In order to prepare porous materials with decent porous structure, Pickering emulsion template method has been proved to be one of the most effective technologies to create pore structure. This paper reviewed comprehensively the latest research progress on the preparation of porous materials from various Pickering emulsions and their applications in the decontamination of pollutants (e.g., heavy metal ions, organic pollutants) and in the oil/water separation. It was expected that the summaries and discussions in this review will provide insights into the design and fabrication of new efficient porous adsorbents, and also give us a better understanding of the subject.

Application of emulsion and Pickering emulsion liquid membrane technique for wastewater treatment: an overview

According a wide range of relevant literature, the emulsion liquid membrane technique (ELM) is considered an efficient method to separate and recover organic and inorganic contaminants that could otherwise be released into the environment. One important limitation of ELM process concerns the stabilization and de-stabilization of emulsion globules. To address this, over the last few years, a new ELM trend known as the Pickering emulsion liquid membrane (PELM) has been developed. PELM involves nanoparticle concepts to achieve a more stable emulsion for wastewater treatment. In this article, ELM and PELM techniques, preparation methods, characteristics, stabilization methods (i.e., mechanical and ultrasound emulsification), and de-stabilization (i.e., swelling, leakage and coalescence) of the emulsion are reviewed and described. In addition, various parameters that could impact ELM stability, extraction, and recovery, such as emulsification speed and time, surfactant, carrier, internal agent, diluent, stirring speed, internal to membrane ratio, type of organic membrane, and treatment ratio, are also presented and discussed.

Generation of nano- and micro-sized organic pollutant emulsions in simulated road runoff

A wide range of organic pollutants (OPs) are emitted from the road and traffic environment and transported with road runoff to receiving waters. To provide an understanding of the transport routes of OPs in the environment, an investigation was carried out with the aim to determine whether OPs are transported with nano- and microparticles in the form of emulsions. Tests were performed on simulated road runoff, using laboratory prepared mixtures of ultrapure water and specific polycyclic aromatic hydrocarbons (PAHs), alkylphenols (APs) and their ethoxylates (APEOs), phthalates, diesel oil (aliphatic hydrocarbons), with and without addition of humic acid (HA) and iron (Fe) colloids. The samples were analysed directly after mixing and after a few days of stabilisation for particle size distribution (PSD) and concentrations of particles in the size range 10 nm-100 μm, and zeta potential > ± 500 mV. Further, after long-term storage to achieve stabilisation, selected samples were investigated for the PSD and particle concentrations in the ranges 10 nm-2 μm, to determine whether stable emulsions had formed. The following simulation mixtures, both mixed and stabilised, were identified as potential emulsions: diesel, APs and APEOs, diesel with APs and APEOS, phthalates, and a mixture of all OPs with and without colloids. Measurements with the Zetasizer and Nanosight instruments imply that the majority of particles in the samples were found in the nano-range of 30-660 nm respectively, and a smaller portion of particles < 28% also measured with Coulter Counter were found to be micro-sized. Higher concentrations of the smallest nanoparticles were found in the mixture of all OPs without colloids added, than in the OP mixture with colloids added. The results indicate that the addition of colloids favours the formation of larger micro-sized emulsions that may break down with time into nano-sized particles. In the mixed samples, the number of micro-sized particles decreased, while the number of nanoparticles increased; this process may also occur in road runoff transportation systems during heavy rain events. This is the first study to indicate that emulsions of OPs may be formed in road runoff, and that emulsions may act as carriers of OPs in urban stormwater.

Mechanism of high temperature induced destabilization of nonpolar organoclay suspension

HYPOTHESIS

High temperatures can reduce the colloidal stability and rheological properties of nonpolar organoclay suspensions. The desorption of surfactants from organoclay has been proposed to explain this effect, but the mechanism remains unclear. In this work, it was hypothesized that the high-temperature-induced desorption of ion-exchanged surfactants is the main factor affecting the stabilization of suspensions.

EXPERIMENTS

Using the cationic surfactant dimethyldioctadecylammonium chloride (DODMAC) and Na-montmorillonite (Na-MMT), the high-temperature-induced reestablishment of the adsorption-desorption equilibrium of DODMAC in organoclay suspensions was studied. Thermogravimetric analysis combined with infrared spectroscopy and gas chromatography/mass spectrometry experiments were performed to determine the thermal decomposition products and, ultimately, infer the adsorption modes and locations of DODMAC on Na-MMT. Thermal analysis and rheology were utilized to demonstrate the high-temperature-induced desorption and transfer of DODMAC in organoclay suspensions.

FINDINGS

High temperatures induced the complete desorption of physically adsorbed DODMAC molecules from particle surfaces, the partial desorption of ion-exchanged dimethyldioctadecylammonium ions (DODMA⁺ ions) from particle surfaces, and the partial transfer of ion-exchanged DODMA⁺ ions from the surfaces to the interlayers. Importantly, desorption of ion-exchanged DODMA⁺ ions resulted in destabilization of the organoclay suspensions at high temperatures.

Magnetic Hierarchically Macroporous Emulsion-Templated Poly(acrylic acid)-Iron Oxide Nanocomposite Beads for Water Remediation

Tainting of waterbodies with noxious industrial waste is the gravest environmental concern of the day that continues to wreak inevitable havoc on human health. To cleanup these hard-to-remove life-threatening water contaminants, we have prepared hierarchically porous poly(acrylic acid) beads by emulsion templating. These emulsion-templated macroporous polymer beads not only mediate the synthesis of Fe₃O₄ nanoparticles inside their porous network using a coprecipitation approach but, in turn, create diverse anchoring sites to immobilize an additional poly(acrylic acid) active layer onto the nanocomposite beads. These post-synthetically modified nanocomposite beads with macropores and abundant acrylic acid moieties offer the ready mass transfer and fair advantage of relatively higher overall negative charge to efficiently adsorb lead [Pb(II)] and crystal violet with impressive performance-even superior to many of the materials explored in this regard so far. Furthermore, the strong entanglement of nanoparticles in the porous polymeric scaffolds tackles the curb of trade-off between all-round effective remediation and secondary pollution and the millimeter size eases their processing and recovery during the adsorption tests, thereby making these materials practically worthwhile.

Influence of hydrophilic silica nanoparticles on the adsorption layer properties of non-ionic surfactants at water/heptane interface

There is a notable paucity of studies investigating the impact of charged nanoparticles on the interfacial behavior of nonionic surfactants, assuming that the interactions are negligible in the absence of electrostatic forces. Here, we argue about our observations and the existence of a complex interfacial behavior in such systems depending on the type and chemical structure of surfactant. This study set out to investigate the effects of interactions between hydrophilic silica nanoparticles (NP) and non-ionic surfactants on water/heptane dynamic interfacial properties using drop profile analysis tensiometry (PAT). Three surfactants were studied, namely Triton X-100 (significantly soluble in water phase), C₁₂DMPO (well soluble in both phases) and SPAN 80 (oil-soluble). The different chemical structures and partition coefficients of the surfactants enabled us to cover possible interactions and differentiate between bulk and interfacial interactions. We observed that hydrophilic silica NPs had a negligible effect on the interfacial behavior of Triton X-100, that they increased the surface activity of C₁₂DMPO when both compounds are initially in the aqueous phase. Most interestingly is that the added NPs generated unstable interfacial NP-surfactant complexes and reduced the pseudo-equilibrium interfacial tension of oil-soluble surfactant, Span 80, even though NPs and surfactants were in different bulk phases.

Emulsions stabilized with mixed SiO2 and Fe3O4 nanoparticles: mechanisms of stabilization and long-term stability

Using SiO₂ and Fe₃O₄ nanoparticles as stabilizers makes it possible to obtain Pickering emulsions with long-term stability to coalescence and creaming.

Control of Particle Adsorption for Stability of Pickering Emulsions in Microfluidics

Studying the stability of Pickering emulsion is of great interest for applications including catalysis, oil recovery, and cosmetics. Conventional methods emphasize the overall behavior of bulk emulsions and neglect the influence of particle adsorbing dynamics, leading to discrepancies in predicting the shelf-life of Pickering emulsion-based products. By employing a microfluidic method, the particle adsorption is controlled and the stability of the Pickering emulsions is consequently examined. This approach enables us to elucidate the relationship between the particle adsorption dynamics and the stability of Pickering emulsions on droplet-level quantitatively. Using oil/water emulsions stabilized by polystyrene nanoparticles as an example, the diffusion-limited particle adsorption is demonstrated and investigated the stability criteria with respect to particle size, particle concentration, surface chemistry, and ionic strength. This approach offers important insights for application involving Pickering emulsions and provides guidelines to formulate and quantify the Pickering emulsion-based products.

Tailoring the Wettability of Colloidal Particles for Pickering Emulsions via Surface Modification and Roughness

Pickering emulsions are water or oil droplets that are stabilized by colloidal particles and have been intensely studied since the late 90s. The surfactant-free nature of these emulsions has little adverse effects such as irritancy and contamination of environment and typically exhibit enhanced stability compared to surfactant-stabilized emulsions. Therefore, they offer promising applications in cosmetics, food science, controlled release, and the manufacturing of microcapsules and porous materials. The wettability of the colloidal particles is the main parameter determining the formation and stability of Pickering emulsions. Tailoring the wettability by surface chemistry or surface roughness offers considerable scope for the design of a variety of hybrid nanoparticles that may serve as novel efficient Pickering emulsion stabilizers. In this review, we will discuss the recent advances in the development of surface modification of nanoparticles.

Magnetic-responsive switchable emulsions based on Fe3O4@SiO2–NH2 nanoparticles

Reversible magnetic control of emulsification and demulsification behavior based on engineered Fe₃O₄@SiO₂–NH₂ nanoparticles.

On the Negative Surface Tension of Solutions and on Spontaneous Emulsification

The condition of negative surface tension of a binary regular solution is discussed in this paper using the recently reconfirmed Butler equation (Langmuir 2015, 31, 5796-5804). It is shown that the surface tension becomes negative only for solutions with strong repulsion between the components. This repulsion for negative surface tension should be so strong that this phenomenon appears only within a miscibility gap, that is, in a two-phase region of macroscopic liquid solutions. Thus, for a macroscopic solution, the negative surface tension is possible only in a nonequilibrium state. However, for a nano-solution, negative surface tension is also possible in equilibrium state. It is also shown that nano- and microemulsions can be thermodynamically stable against both coalescence and phase separation. Further, the thermodynamic theory of emulsion stability is developed for a three-component (A-B-C) system with A-rich droplets dispersed in a C-rich matrix, separated by the segregated B-rich layer (the solubility of B is limited in both A and C while the mutual solubility of A and C is neglected). It is shown that when a critical droplet size is achieved by forced emulsification, it is replaced by spontaneous emulsification and the droplet size is reduced further to its equilibrium value. The existence of maximum temperature of emulsion stability is shown. Using low-energy emulsification below this maximum temperature, spontaneous emulsification can appear, which is enhanced with further decrease of temperature. This finding can be applied to interpret the experimental observations on spontaneous emulsification or for the design of stable micro- and nanoemulsions.

An Overview of Pickering Emulsions: Solid-Particle Materials, Classification, Morphology, and Applications

Pickering emulsion, a kind of emulsion stabilized only by solid particles locating at oil-water interface, has been discovered a century ago, while being extensively studied in recent decades. Substituting solid particles for traditional surfactants, Pickering emulsions are more stable against coalescence and can obtain many useful properties. Besides, they are more biocompatible when solid particles employed are relatively safe in vivo. Pickering emulsions can be applied in a wide range of fields, such as biomedicine, food, fine chemical synthesis, cosmetics, and so on, by properly tuning types and properties of solid emulsifiers. In this article, we give an overview of Pickering emulsions, focusing on some kinds of solid particles commonly serving as emulsifiers, three main types of products from Pickering emulsions, morphology of solid particles and as-prepared materials, as well as applications in different fields.

Pore Structure of Macroporous Polymers Using Polystyrene/Silica Composite Particles as Pickering Stabilizers

A novel approach for the preparation of interconnected macroporous polymers with a controllable pore structure was reported. The method was based on the polymerization of water-in-oil Pickering high internal phase emulsion (HIPE) stabilized by polystyrene (PS)/silica composite particles. The composite Pickering stabilizers were facilely obtained by mixing positively charged PS microspheres and negatively charged silica nanoparticles, and their amphiphilicity could be delicately tailored by varying the ratio of PS and silica. The droplet size of Pickering HIPEs was characterized using an optical microscope. The pore structure of polymer foams was observed using a scanning electron microscope. The interconnectivity of macroporous polymers was evaluated upon their gas permeability, which was greatly improved after etching PS microspheres included in the Pickering stabilizers with tetrahydrofuran. As a result, fine tailoring of the pore structure of polymer foams could be realized by simply tuning the ratio of PS to silica particles in the composite stabilizer.

Artificial cells: from basic science to applications

Artificial cells have attracted much attention as substitutes for natural cells. There are many different forms of artificial cells with many different definitions. They can be integral biological cell imitators with cell-like structures and exhibit some of the key characteristics of living cells. Alternatively, they can be engineered materials that only mimic some of the properties of cells, such as surface characteristics, shapes, morphology, or a few specific functions. These artificial cells can have applications in many fields from medicine to environment, and may be useful in constructing the theory of the origin of life. However, even the simplest unicellular organisms are extremely complex and synthesis of living artificial cells from inanimate components seems very daunting. Nevertheless, recent progress in the formulation of artificial cells ranging from simple protocells and synthetic cells to cell-mimic particles, suggests that the construction of living life is now not an unrealistic goal. This review aims to provide a comprehensive summary of the latest developments in the construction and application of artificial cells, as well as highlight the current problems, limitations, challenges and opportunities in this field.