Effect of glycerol with sodium chloride on the Krafft point of sodium dodecyl sulfate using surface tension

Tunable thermoresponsive hydrogels for temperature regulation and warning in fruit and vegetables preservation

Fresh fruit and vegetables usually suffer from quality deterioration when exposed to inappropriate temperatures. Common energy-input temperature regulation is widely applied but there remain challenges of increasing energy consumption. Passive temperature management regulates the heat transfer without energy consumption, showing a sustainable strategy for food preservation. Here, thermoresponsive hydrogels were constructed by incorporating NaCl and sodium dodecyl sulfate (SDS) micelles into a poly(N-isopropylacrylamide-co-acrylamide) (P(NIPAM-co-AM)) network. Due to the excellent mechanical properties and reversible thermochromism at 14 °C and 37 °C, Gel-8 wt%-NaCl could inhibit temperature rise and avoid sunburn damage to peppers under direct sunlight by blocking the input of solar energy and accelerating moisture evaporation. Additionally, hydrogels could act as a feasible sensor by providing real-time visual warnings for inappropriate temperatures during banana storage. Based on the self-adaptive thermoresponsive behaviour, the prepared hydrogels showed effective performance of temperature regulation and quality preservation of fruit and vegetables.

Spherulite formation in green nonaqueous media: The impact of urea on gelation in glycerol

HYPOTHESIS

Large macroscopic assemblies formed by a surfactant, sodium dodecylsulfate (SDS), and glycerol, can be directed to assemble in a hierarchical manner by the addition of a strong hydrogen-bond donor/acceptor, such as urea.

CONTEXT

Self-assembly in complex media is important to a range of applications, for instance in biological media, which are multi-component, to industrial formulations, where additives are present for flavour, texture, and preservation. Here, the gelation and self-assembly of sodium dodecylsulfate (SDS) in glycerol is explored in the presence of an additive, urea. Urea was chosen due to its importance both fundamentally and industrially, but also because of its ability to form strong H-bonds and interact with both glycerol and SDS.

EXPERIMENTAL

To cover the variety of length scales present in the gel-like phase, a combination of optical microscopy and small-angle X-ray scattering techniques were used to probe the micro- to nanoscale.

FINDINGS

On the microscale, the formation of a spectacular spherulite phase, even at low urea contents - 0.1 wt%, upon cooling was observed, a stark difference to the microfibrillar phase observed in the absence of urea. Interestingly, the nanostructure of the two crystalline phases were similar and showed negligible differences. This suggests that urea is not involved in the SDS/glycerol microfibril formation but instead directs the assembly of spherulites by bundling the microfibrils. These ternary systems are also probed as a function of urea content, SDS concentration, and temperature. The observations in this work highlight the importance of small molecules in the self-assembly process, which is relevant both fundamentally but also industrially, where small molecules are often added to formulations.

Many-body dissipative particle dynamics simulations of micellization of sodium alkyl sulfates

We present a study of micelle formation in alkyl sulfate surfactants using the simulation method of many-body dissipative particle dynamics (MDPD). We parametrise our model by tuning the intermolecular interactions in order to reproduce experimental values for the chemical potential and density at room temperature. Using this approach, we find that our model shows good agreement with experimental values for the critical micelle concentration (CMC). Furthermore, we show that our model can accurately predict CMC trends, which result from varying properties such as surfactant tail length and the salt concentration. We apply our model to investigate the effect of aggregation number on various micellar properties, such as the shape of individual micelles and the fraction of bound counterions. We show that micelles become aspherical at large aggregation numbers, in line with experimental predictions, and that longer tail surfactants are generally more spherical at all aggregation numbers compared to those which are shorter. We find excellent agreement between our simulations and experimental values for the degree of counterion binding, a factor that is crucial to accurately studying micellar shape, but one that is typically overlooked in the existing literature.

Unusual Structural Insights Revealed by Rheo-SAXS Studies of Nonaqueous Crystalline Gels

Glycerol is a nonaqueous polar solvent and is of interest in many industrial areas due to its beneficial properties, such as green production and biocompatibility. Our previous works have shown the presence of a fibrillar phase on the microscale that consists of lamellar sodium dodecyl sulfate (SDS) crystals containing interstitial glycerol on the nanoscale. The phase is gel-like at room temperature and demonstrates shear-thinning behavior upon application of a shear. Initially, small-angle X-ray scattering coupled with rheology (rheo-SAXS) measurements were performed to elucidate the structural transition of the gel phase under an applied shear, but it became clear that the aging process of the gel has a profound impact on both the gel nanostructure and also the mechanical properties. For younger gels, both the dissolution of SDS crystallites and the alignment of the fibrillar phase were seen. However, in the aged gels, an unexpected foam was formed at shear rates γ ˙ > 700 s-1. The microscopic structure of the foam phase was imaged using polarizing light microscopy and brightfield and darkfield optical microscopy. The nanostructure of the foam phase was investigated using rheo-SAXS. The foam phase was shown to be stabilized by the presence of SDS crystallites at the air-liquid interface, and the stability of the foam is high with foam persisting even t = 3 months after formation. These results highlight the importance of investigating green nonaqueous media and the gel aging process, both of which are interesting not only on a fundamental level but also for a range of industrial applications, from personal care products and cosmetics to food science.

Bidirectional optical response hydrogel with adjustable human comfort temperature for smart windows

Smart windows are effective in reducing the energy consumption of air conditioning and lighting systems, while contributing to maintaining the comfort zone of temperature in the indoor environment. Currently used smart windows mainly rely on traditional single-phase thermochromic material in which only one abrupt optical change occurs during temperature changes, and their inherent characteristics may not be suited for a practical balance of energy saving and privacy protection. Here, we developed a novel bidirectional optically responsive smart window (BSW) with unique bidirectional optical response features by introducing sodium dodecyl sulfate (SDS)/potassium tartrate (PTH) micelles into PNIPAM hydrogel to form a composite hydrogel, which was encapsulated in two glass panels. The upper critical solution temperature (UCST) and lowest critical solution temperature (LCST) of the material can be individually adjusted and are capable of matching the human comfort zone of temperature. In addition, the smart window exhibits remarkable transparency (92.5%), visible light transmission ratio (Tlum = 91.31%), and excellent solar modulation (ΔTsol,UCST = 76.34%, ΔTsol,LCST = 76.75%). Moreover, it possesses selectivity in transmitting light in the infrared band of solar radiation and can complete the "transparent-opaque" transition in a very narrow temperature range (<1 °C). When at comfortable temperatures, the highly transparent smart windows facilitate interior light and appreciation of the view. At low temperatures, SDS/PTH micelles aggregate to form large micelles, blocking the transmission of light and protecting customer privacy. At high temperatures, PNIPAM can undergo a "sol-gel" transition, thus blocking incident solar radiation. Taken together, these proposed materials with bidirectional optical response characteristics would be harnessed as a promising platform for building energy conservation, anti-counterfeiting, information encryption, and temperature monitoring.

Engineering Self-Adaptive Multi-Response Thermochromic Hydrogel for Energy-Saving Smart Windows and Wearable Temperature-Sensing

Buildings account for ≈40% of the total energy consumption. In addition, it is challenging to control the indoor temperature in extreme weather. Therefore, energy-saving smart windows with light regulation have gained increasing attention. However, most emerging base materials for smart windows have disadvantages, including low transparency at low temperatures, ultra-high phase transition temperature, and scarce applications. Herein, a self-adaptive multi-response thermochromic hydrogel (PHC-Gel) with dual temperature and pH response is engineered through "one-pot" integration tactics. The PHC-Gel exhibits excellent mechanical, adhesion, and electrical conductivity properties. Notably, the low critical solubility temperature (LCST) of PHC-Gel can be regulated over a wide temperature range (20-35 °C). The outdoor practical testing reveals that PHC-Gel has excellent light transmittance at low temperatures and radiation cooling performances at high temperatures, indicating that PHC-Gel can be used for developing energy-saving windows. Actually, PHC-Gel-based thermochromic windows show remarkable visible light transparency (Tlum ≈ 95.2%) and solar modulation (△Tsol ≈ 57.2%). Interestingly, PHC-Gel has superior electrical conductivity, suggesting that PHC-Gel can be utilized to fabricate wearable signal-response and temperature sensors. In summary, PHC-Gel has broad application prospects in energy-saving smart windows, smart wearable sensors, temperature monitors, infant temperature detection, and thermal management.

Composition and temperature effects on the solution structure of SDS/octanol/brine by SANS, NMR and microscopy

We investigate the solution structures of model sodium dodecyl sulfate/octanol/brine ternary mixtures across the lamellar (Lα), vesicle (L4) and micellar (L1) phases employing small angle neutron scattering (SANS), optical microscopy and nuclear magnetic resonance (NMR). Specifically, we examine the effect of co-surfactant octanol (0.2-9.48 w/v%) and temperature (25-65 °C) along dilution lines at fixed octanol : SDS ratios (0.08-1.21). A transition from Lα to sponge phase (L3) above 35 °C is found along the octanol : SDS = 1.21 isopleth, with phase coexistence above ϕ ≈ 0.14 weight fraction of surfactant and co-surfactant. The lamellar bilayers swell upon dilution, with an approximately linear increase of d-spacing, accompanied by a decrease of the Caillé parameter, indicative of greater membrane rigidity. At a lower octanol : SDS ratio of 0.62, coexistence of oblate micelles and vesicles is observed with preferential formation of vesicles at low concentrations. Dilution of the L1 phase, along octanol : SDS = 0.08, results in elongated micelles, as the NaCl : SDS ratio increases, while higher temperatures favour the formation of less elongated micelles. Our results provide a detailed map of the equilibrium structures found in the Lα vicinity of this extensively investigated flow-responsive surfactant system.

Dual-Responsive Hydrogels with Three-Stage Optical Modulation for Smart Windows

Since room temperature management consumes a large amount of building energy, thermochromic smart windows have been extensively used for temperature regulation and energy management. However, the development of the smart window is still limited by its simple thermochromic performance, unreasonable thermochromic temperature, and the lack of additional stimulation conditions. In this work, a dual-responsive hydrogel was developed by introducing sodium dodecyl sulfate (SDS) and sodium chloride into the cross-linking network of poly(N-isopropylacrylamide) (PNIPAM) and polyacrylamide (PAM) for energy-saving and privacy protection. By controlling the temperature from low (<15 °C) to medium (15-28 °C) to high (>28 °C), the dual-responsive hydrogel achieved a reversible three-stage transition of opaque-transparent-translucent. The hydrogel exhibited a satisfactory solar modulation ability (T_lum = 80.3%, ΔT_sol,15-18°C = 72.9%, ΔT_sol,18-35°C = 42.7%) and effective IR and UV shielding at high (or low) temperatures. Moreover, compared with traditional windows, smart windows made of dual-responsive hydrogels could offer better thermal insulation and heat preservation. The electrochromic properties of the dual-responsive hydrogel presented a facile strategy to meet the needs of different situations. The dual-responsive hydrogel features energy-saving, privacy protection, three-stage optical modulation, and multistimulus responsiveness, making it an ideal smart window candidate.

Effect of sodium lauryl sulfate-mediated gelation on the suppressed dissolution of crystalline lurasidone hydrochloride and a strategy to mitigate the gelation

In dissolution test, the surfactant sodium lauryl sulfate (SLS) is usually added to increase the dissolution of insoluble drugs and achieve the sink condition. However, the current study found that 0.1 % SLS would significantly decrease the dissolution of crystalline lurasidone hydrochloride (LH, a BCS Ⅱ drug). The aim of this study was to clarify the mechanism of this unexpected phenomenon and explore a strategy for mitigating the negative effect of SLS on the dissolution of LH. Sample characterizations (such as PLM, DSC, PXRD, IR and NMR) confirmed that the insoluble single-phase amorphous LH-SLS complex (with a single T_g at 35.2 °C) formed during dissolution in 0.1 % SLS aqueous solution via electrostatic interaction, tetrel bond interaction, and hydrophobic effect. Due to the plasticization effect of water, the transition of amorphous LH-SLS from its glassy state to viscous supercooled liquid state led to the gel formation, and suppressd the dissolution of LH. Meanwhile, the solubility curve of LH in SLS aqueous solution at various concentrations exhibited an unusual V-shaped feature, with the CMC value of SLS serving as the inflection point, since the gel degree was attenuated due to the micelle solubilization of SLS. Additionally, an innovative strategy was developed to alleviate the inhibiting effect of SLS on LH dissolution based on the potential competitive interactions. This study not only enriches the internal mechanism of surfactant-inhibited drug dissolution but also informs an effective strategy to mitigate the gelation.

New focus of the cloud point/Krafft point of nonionic/cationic surfactants as thermochromic materials for smart windows

A nonionic poly(oxyethylene) monoalkyl ether (C12(EO)6) and a cationic hexadecylpyridinium bromide (HPB) were used to achieve warm/cool transparency transition.

Co-assembly and Structure of Sodium Dodecylsulfate and other n-Alkyl Sulfates in Glycerol: n-Alkyl Sulfate-Glycerol Crystal Phase

HYPOTHESIS

Following the observation of a microfibrillar phase in sodium dodecylsulfate (SDS)-glycerol mixtures, it is hypothesized that this phase is a crystalline structure containing SDS and glycerol, where the interaction between sulfate and glycerol layers mediates the co-assembly, which also could be universal for similar systems formed by n-alkyl sulfate homologues. Experiment. n-alkyl sulfate glycerol solutions were studied using a combination of optical microscopy, small- and wide-angle X-ray scattering (SAXS/WAXS). Time-resolved SAXS was employed to determine the phase formation in SDS-glycerol-water mixtures.

FINDINGS

The microfibrillar crystalline phase was reproduced in even-chained n-alkyl sulfates with a chain length between 12 and 18 carbon atoms, where the phase lamellar period increased uniformly with the alkyl chain length. Reconstruction of electron density profiles from the diffraction patterns allowed the lamellar structural motif of the phase, the glycerol location and stoichiometry to be determined. When SDS-glycerol-water mixtures with water concentration below 6 wt% are isothermally solidified at 20 °C, SDS-glycerol crystals and/or anhydrous SDS form, where the former is inhibited by the latter at higher water concentrations. The learnings from the SDS-glycerol phase formation allows new gels to be created, utilising the glycerol-sulfate motif generating microfibrils. This expands the knowledge of the applicable formulation space for SDS-water containing mixtures.

Selective Crystallization of d-Mannitol Polymorphs Using Surfactant Self-Assembly

Selective crystallization of polymorphs is highly sought after in industrial practice. Yet, state-of-the-art techniques either use laboriously engineered solid surfaces or strenuously prepared heteronucleants. We propose an approach where surfactants in solution self-assemble effortlessly into mesoscopic structures dictating the polymorphic outcome of the target solute. Sodium dodecyl sulfate (SDS) surfactant is used as a tailored additive to crystallize different polymorphic forms of a model active pharmaceutical ingredient, d-mannitol. Different mesoscopic phases of SDS template particular polymorphs: packed monolayers, micelles, and crystals favored the β, α, and δ forms of d-mannitol, respectively. A synergistic effect of topological templating and molecular interactions is proposed as the rationale behind the observed selective crystallization of polymorphs. This crystal engineering technique suggests that surfactant self-assemblies can be used as tailored templates for polymorphic control.

Surfactant Adsorption to Different Fluid Interfaces

Surfactant adsorption to fluid interfaces is ubiquitous in biological systems, industrial applications, and scientific fields. Herein, we unravel the impact of the hydrophobic phase (air and oil) and the role of oil polarity on the adsorption of surfactants to fluid interfaces. We investigated the adsorption of anionic (sodium dodecyl sulfate), cationic (dodecyltrimethylammonium bromide), and non-ionic (polyoxyethylene-(23)-monododecyl ether) surfactants at different interfaces, including air and oils, with a wide range of polarities. The surfactant-induced interfacial tension decrease, called the interfacial pressure, correlates linearly with the initial interfacial tension of the clean oil-water interface and describes the experimental results of over 30 studies from the literature. The higher interfacial competition of surfactant and polar oil molecules caused the number of adsorbed molecules at the interface to drop. Further, we found that the critical micelle concentration of surfactants in water correlates to the solubility of the oil molecules in water. Hence, the nature of the oil affects the adsorption behavior and equilibrium state of the surfactant at fluid interfaces. These results broaden our understanding and enable better predictability of the interactions of surfactants with hydrophobic phases, which is essential for emulsion, foam, and capsule formation, pharmaceutical commodities, cosmetics, and many food products.

Fracto-eutectogels: SDS fractal dendrites via counterion condensation in a deep eutectic solvent

Glyceline, a deep eutectic solvent comprising glycerol and choline chloride, is a green nonaqueous solvent with potential industrial applications. Molecular mechanisms of surfactant self-assembly in deep eutectic solvents are expected to differ from those in their constituent polar components and are not well understood. Here we report the observation of self-assembled SDS fractal dendrites with dimensions up to ∼mm in glyceline at SDS concentrations as low as cSDS ∼ 0.1 wt%. The prevalence of these dendritic fractal aggregates led to the formation of a gel phase at SDS concentrations above ≥1.9 wt% (the critical gelation concentration cCGC). The gel microscopic structure was visualised using polarised light microscopy (PLM); rheology measurements confirmed the formation of a colloidal gel, where the first normal stress difference was negative and the elastic modulus was dominant. Detailed nano-structural characterisation by small-angle neutron scattering (SANS) further confirmed the presence of fractal aggregates. Such SDS aggregation or gelation has not been observed in water at such low surfactant concentrations, whereas SDS has been reported to form lamellar aggregates in glycerol (a component of glyceline). We attribute the formation of the SDS fractal dendrites to the condensation of counterions (i.e. the choline ions) around the SDS aggregates - a diffusion-controlled process, leading to the aggregate morphology observed. These unprecedented results shed light on the molecular mechanisms of surfactant self-assembly in deep eutectic solvents, important to their application in industrial formulation.

Antioxidant Behavior Affected by Polarity in the Olive Oil: Experimental and Molecular Simulation Investigations

Natural antioxidants are essential potential sources for protecting the oxidation of food oils. However, until now, the mechanisms are still not very clear, especially from the quantitatively theoretical level to analyze the antioxidant behavior. In this work, the micromechanisms of the antioxidant behavior affected by polarity in the olive oil were systematically investigated by experimental and computational methods. The results showed that the polarity of antioxidants decreased with the growth of the alkyl chains, which had multiple impacts on the effectiveness of antioxidants. The excessive polarity gap between the antioxidant and oil molecules would cause the antioxidant to be dispersed at the oil-air interface, which could enhance their antioxidant ability. Meanwhile, the antioxidants with longer alkyl chains had lower polarity and better dispersibility but decreased mobility. Hence, compared with other antioxidants, medium polarity antioxidants presented both good dispersion and relatively suitable migration, indicating that they would have an optimal antioxidant effect.

Depletion attraction impairs the plasticity of emulsions flowing in a constriction

We study the elasto-plastic behavior of dense attractive emulsions under a mechanical perturbation. The attraction is introduced through non-specific depletion interactions between the droplets and is controlled by changing the concentration of surfactant micelles in the continuous phase. We find that such attractive forces are not sufficient to induce any measurable modification on the scalings between the local packing fraction and the deformation of the droplets. However, when the emulsions are flowed through 2D microfluidic constrictions, we uncover a measurable effect of attraction on their elasto-plastic response. Indeed, we measure higher levels of deformation inside the constriction for attractive droplets. In addition, we show that these measurements correlate with droplet rearrangements that are spatially delayed in the constriction for higher attraction forces.