Constructing high-efficiency photocatalyst for degrading ciprofloxacin: Three-dimensional visible light driven graphene based NiAlFe LDH

A review of the degradation of antibiotic contaminants using advanced oxidation processes: modification and application of layered double hydroxides based materials

In recent years, the treatment of organic pollutants has become a global concern due to the threat to human health posed by emerging contaminants, especially antibiotic contamination. Advanced oxidation processes (AOPs) can solve the organic pollution problem well, which have been identified as a promising solution for the treatment of hard-to-handle organic compounds including antibiotic contaminants. Layered double hydroxides (LDHs) are excellent catalysts because of their flexible tunability, favorable thermal stability, abundant active sites, and facile exchangeability of intercalated anions. This paper conducted a systematic review of LDHs-based materials used for common antibiotic removal by three significant AOP technologies, such as photocatalysis, the Fenton-like processes, and peroxymonosulfate catalysis. The degradation effects studied in various studies were reviewed, and the mechanisms were discussed in detail based on the type of AOPs. Finally, the challenges and the application trends of AOPs that may arise were prospected. The aim of this study is to suggest ways to provide practical guidance for the screening and improvement of LDH materials and the rational selection of AOPs to achieve efficient antibiotic degradation. This could lead to the development of more efficient and environmentally friendly materials and processes for degrading antibiotics, with significant implications for our ecological conservation by addressing water pollution.

Photocatalytic transfer of aqueous nitrogen into ammonia using nickel-titanium-layered double hydroxide

The development of solar-driven transfer of atmospheric nitrogen into ammonia is one of the green and sustainable strategies in industrial ammonia production. Nickel-titanium-layered double hydroxide (NiTi-LDH) was synthesised using the soft-chemical process for atmospheric nitrogen fixation application under photocatalysis in an aqueous system. NiTi-LDH was investigated using advanced characterisation techniques and confirmed the potential oxygen vacancies and/or surface defects owing to better photocatalytic activity under the solar spectrum. It also exhibited a bandgap of 2.8 eV that revealed its promising visible-light catalytic activities. A maximum of 33.52 µmol L-1 aqueous NH3 was obtained by continuous nitrogen (99.9% purity) supply into the photoreactor under an LED light source. Atmospheric nitrogen supply (≈78%) yielded 14.67 µmol L-1 aqueous NH3 within 60 min but gradually reduced to 3.6 µmol L-1 at 330 min. Interestingly, in weak acidic pH, 20.90 µmol L-1 NH3 was produced compared to 11.51 µmol L-1 NH3 in basic pH. The application of NiTi-LDH for visible-light harvesting capability and photoreduction of atmospheric N2 into NH3 thereby opens a new horizon of eco-friendly NH3 production using natural sunlight as alternative driving energy.

Regulable in-situ autoredox for anchoring synergistic Ni/NiO nanoparticles on reduced graphene oxide with boosted alkaline electrocatalytic oxygen evolution

To develop ideal alternatives to noble metal catalysts, transition metal catalysts supported on graphene have been receiving extensive attention in the field of electrochemical energy. In this work, using graphene oxide (GO) and nickel formate as precursors, Ni/NiO synergistic nanoparticles with regulable composition are anchored on reduced graphene oxide (RGO) to prepare Ni/NiO/RGO composite electrocatalysts through in-situ autoredox. Thanks to the synergistic effect of Ni³⁺ active sites and Ni electron donors, the as-prepared Ni/NiO/RGO catalysts exhibit efficient electrocatalytic oxygen evolution performance in 1.0 M KOH electrolyte. The optimal sample has an overpotential of only 275 mV at a current density of 10 mA cm^-2 and a small Tafel slope of 90 mV dec^-1, which are very comparable to those of commercial RuO₂ catalyst. Additionally, the catalytic capacity and structure remain stable after 2000 cyclic voltammetry cycles. For the electrolytic cell assembled with the best-performing sample as anode and commercial Pt/C as cathode, the current density can reach 10 mA cm^-2 at a low potential of 1.57 V and remains stable after 30 h of continuous work. It would be expected that the as-developed Ni/NiO/RGO catalyst with high activity should have broad application prospects.

High-efficient and rapid removal of anionic and cationic dyes using a facile synthesized sole adsorbent NiAlFe-layered triple hydroxide (LTH)

It would be extremely momentous to familiarize a low-cost sole adsorbent NiAlFe-layered triple hydroxides (LTHs) having a strong sorption affinity towards both anionic and cationic dyes. Using the urea hydrolysis hydrothermal method LTHs were fabricated and by altering the ratio of participant metal cations the adsorbent was optimized. BET analysis revealed that the optimized LTHs possess an elevated surface area (160.04 m²/g) while TEM and FESEM analysis portrayed the stacked sheets-like 2D morphology. LTHs were employed for the amputation of anionic congo red (CR) and cationic brilliant green (BG) dye. The adsorption study showed that within 20 and 60 min, respectively, maximum adsorption capacities were achieved at 57.47 mg/g and 192.30 mg/g for CR and BG dye. Adsorption isotherm, kinetics, and thermodynamics study revealed that both chemisorptions with physisorptions were the assertive factor for the dye encapsulation. This enhanced adsorption performance of the optimized LTH for the anionic dye is attributed to its inherent anions exchange properties and new bond formation with the adsorbent skeleton. Whereas for the cationic dye, it was because of the formation of strong hydrogen bonds, and electrostatic interaction. Morphological manipulation of LTHs, formulates the optimized adsorbent LTH111, provokes the adsorbent for this elevated adsorption performance. Overall, this study revealed that LTHs have a high potential for the effectual remediation of dyes from wastewater as a sole adsorbent at a low cost.

Interface engineered hydrangea-like ZnCo2O4/NiCoGa-layered double hydroxide@polypyrrole core-shell heterostructure for high-performance hybrid supercapacitor

Rationally constructing advanced battery-type electrodes with hierarchical core-shell heterostructure is essential for improving the energy density and cycling stability of hybrid supercapacitors. Herein, this work successfully constructs hydrangea-like ZnCo₂O₄/NiCoGa-layered double hydroxide@polypyrrole (denoted as ZCO/NCG-LDH@PPy) core-shell heterostructure. Specifically, the ZCO/NCG-LDH@PPy employs ZCO nanoneedles clusters with large open void space and rough surfaces as the core, and NCG-LDH@PPy composite as the shell, comprising hexagonal NCG-LDH nanosheets with rich active surface area, and conductive PPy films with different thicknesses. Meanwhile, density functional theory (DFT) calculations authenticate the charge redistribution at the heterointerfaces between ZCO and NCG-LDH phases. Benefiting from the abundant heterointerfaces and synergistic effect among different active components, the ZCO/NCG-LDH@PPy electrode acquires an extraordinary specific capacity of 381.4 mAh g^-1 at 1 A g^-1, along with excellent cycling stability (89.83% capacity retention) after 10,000 cycles at 20 A g^-1. Furthermore, the prepared ZCO/NCG-LDH@PPy//AC hybrid supercapacitor (HSC) exhibits a remarkable energy density (81.9 Wh kg^-1), an outstanding power density (17,003.7 W kg^-1), and superior cycling performance (a capacitance retention of 88.41% and a coulombic efficiency of 93.97%) at the end of the 10,000th cycle. Finally, two ZCO/NCG-LDH@PPy//AC HSCs in series can light up a LED lamp for 15 min, indicating its excellent application prospects.

Remediation of pharmaceutical pollutants using graphene-based materials - A review on operating conditions, mechanism and toxicology

Graphene is a high surface area special carbon compound with exceptional biological, electronic and mechanical properties. Graphene-based materials are potential components used in water treatment on different modes and processes. Ibuprofen and ciprofloxacin are two commonly found pharmaceutical contaminants discharged into water bodies from industrial, domestic and hospital sources. Their concentration levels in water bodies are reported in the range of 1 μg/L to 6.5 mg/L and 0.050-100 μg/L respectively. Their toxic effects pose very high risk to the inhabiting organisms. Their ability to resist biodegradation and capacity to bioaccumulate makes the conventional methods less effective in removal. In the present article, treatment of these compounds via three methods, adsorption, photocatalytic degradation and electro-fenton reactions using graphene-based materials along with the methods adopted for synthesis and treatment are reviewed. The uptakes obtained by graphene-derived adsorbents are presented along with the optimal operating conditions. Studies reported complete removal of ibuprofen from wastewater was achieved at 7 pH for 60 min using graphene membrane as adsorbent and uptake of 99% of ciprofloxacin was exhibited for graphene nanoplates/boron nitrate aerogel at a pH of 7 and 60 min. The reduced graphene oxide surface exhibits higher affinity to light adsorption which leads to the formation of photo generated electrons. The future perspectives for improved applications of graphene-based materials and the research gap currently existing are highlighted.

Bridging between NiAl-LDH and g-C3N4 by using carbon quantum dots for highly enhanced photoreduction of CO2 into CO

A series of treble NiAl-LDH/g-C₃N₄/carbon quantum dots (LDH/CN/CQDs) photocatalysts is successfully prepared for the photoreduction of CO₂ to CO via a facile hydrothermal pathway. In the 3D flower-like LDH/CN/CQDs, CQDs not only achieve the efficient inhibition of charge recombination but also act as the unhindered "electronic bridges" to synergistically construct a classical type-Ⅱ charge transfer configuration, which synchronously permits the effluence of photogenerated electrons from CN to LDH and holes from LDH to CN, and promotes ultraviolet-visible irradiation respondence. The sample of LDH/CN/CQDs-6 is the optimal one amongst the LDH/CN/CQDs with a larger special surface area (98.43 m²g^-1) and an appropriate content of CQDs (66.9 wt%), exhibiting the highest CO evolution rate (5.2 μmol·g^-1·h^-1) under visible light irradiation without any sacrificial agent or photosensitizer in water. This is 26.8- and 20.9-fold higher than those of the pristine LDH, pure CN, and their binary counterparts, respectively, and also outperforms most reported LDH-based photocatalysts. As unhindered electron conduction bridges, the highly dispersed CQDs in the LDH/CN heterojunction significantly increase utilization efficiency of light energy and separation efficiency of photogenerated electron-hole pairs. This work provides a beneficial attempt to integrate CQDs with LDH/CN for the positive synergetic effect on both photoelectric properties and electron transfer to obtain highly enhanced photocatalytic activity of CO₂ into CO, and expected to be extended towards broader photocatalytic applications.

Sustainably recycling spent lithium-ion batteries to prepare magnetically separable cobalt ferrite for catalytic degradation of bisphenol A via peroxymonosulfate activation

A selective separation-recovery process based on tuning organic acid was proposed to the resource recycling of spent lithium-ion batteries (LIBs) for the first time. The low-cost preparation of CoFe₂O₄, reuse of waste acid and recovery of Li can be realized in this process, simultaneously. Li and Co in spent LIBs can be leached efficiently using citric acid as a leaching agent, and separated effectively from leaching solution by tuning oxalic acid content. The results from the characterizations of the prepared CoFe₂O₄ (CoFe₂O₄-LIBs) show that it possesses higher ratio of Co(II)/Co(III) and Fe(II)/Fe(III), larger surface specific area and more number of acid sites in comparison with pure CoFe₂O₄. Besides, CoFe₂O₄-LIBs was used to activate peroxymonosulfate (PMS) for the degradation of bisphenol A (BPA). Interestingly, its degradation performance is superior to that of pure CoFe₂O₄ and the related Co-based catalysts. The excellent degradation performance can be maintained in presence of inorganic ions (e.g., Cl^-, HCO₃^-, H₂PO₄^- and NO₃^-) with high concentration or humic acid. Moreover, surface-bound SO₄^∙- is considered as the main reactive species for the degradation of BPA. More importantly, CoFe₂O₄-LIBs can be readily recycled by using an external magnet and own superior ability of regeneration.

A facile solvothermal syntheses of NiFe layered double hydroxide-Bi2MoO6 heterostructure/reduced graphene oxide with efficient photodegradation for tetracycline

A heterojunction of NiFe layered double hydroxide (NiFe LDH)-Bi₂MoO₆ (BMO) loaded on reduced graphene oxide (RGO) sheets was synthesized via an eco-friendly solvothermal reaction. The structural characterization shows that NiFe LDH-BMO heterojunctions are well-distributed on the surface of silk-like transparent RGO sheets. The modification of BMO by NiFe LDH and RGO greatly enhances the photocatalytic performance of BMO for degradation of tetracycline (TC) under visible light. The photocatalyst prepared with 3 wt% RGO shows the highest activity and cycle stability. TC can be completely removed in 80 min, which is about 8.7 times that pure BMO, and showing excellent reusability even after five cycles. The excellent enhancement of photocatalytic performance of NiFe LDH-BMO/RGO composite is attributed to the unique sheet-on-sheet hierarchical heterostructure combined with RGO sheets, facilitating the visible light absorption and photogenerated charge carriers separation.

Layered double hydroxide based materials applied in persulfate based advanced oxidation processes: Property, mechanism, application and perspectives

Recently, persulfate-based advanced oxidation processes (persulfate-AOPs) are booming rapidly due to their promising potential in treating refractory contaminants. As a type of popular two-dimensional material, layered double hydroxides (LDHs) are widely used in energy conversion, medicine, environment remediation and other fields for the advantages of high specific surface area (SSA), good tunability, biocompatibility and facile fabrication. These excellent physicochemical characteristics may enable LDH-based materials to be promising catalysts in persulfate-AOPs. In this work, we make a summary of LDHs and their composites in persulfate-AOPs from different aspects. Firstly, we introduce different structure and important properties of LDH-based materials briefly. Secondly, various LDH-based materials are classified according to the type of foreign materials (metal or carbonaceous materials, mainly). Latterly, we discuss the mechanisms of persulfate activation (including radical pathway and nonradical pathway) by these catalysts in detail, which involve (i) bimetallic synergism for radical generation, (ii) the role of carbonaceous materials in radical generation, (iii) singlet oxygen (¹O₂) production and several special nonradical mechanisms. In addition, the catalytic performance of LDH-based catalysts for contaminants are also summarized. Finally, challenges and future prospects of LDH-based composites in environmental remediation are proposed. We expect this review could bring new insights for the development of LDH-based catalyst and exploration of reaction mechanism.

Graphene-based ZnCr layered double hydroxide nanocomposites as bactericidal agents with high sonophotocatalytic performances for degradation of rifampicin

Herein, ZnCr layered double hydroxide (ZnCr LDH), and its nanocomposites with GO and rGO were synthesized using the co-precipitation method. The samples were characterized using XRD, FT-IR, SEM, TEM, BET, and XPS techniques. The sonophotocatalytic activity of the ZnCr LDH, ZnCr LDH/GO, and ZnCr LDH/rGO was investigated via the degradation of rifampicin (RIF) in the ultrasonic bath under visible light irradiation. The synergy index of more than 1 determined for ZnCr LDH/rGO indicated the positive interaction of sonocatalysis and photocatalysis resulted by hybridizing the LDH nanosheets with rGO. The maximum sonophotocatalytic degradation efficiency of 87.3% was achieved in the presence of ZnCr LDH/rGO nanocomposite with the concentration of 1.5 g L^-1 for degradation of RIF with an initial concentration of 15 mg L^-1 within 60 min sonication under visible light irradiation. The addition of different scavengers indicated that hydroxyl radicals, superoxide anion radicals, and the generated holes played a dominant role in the degradation of the pollutant molecules. A possible degradation mechanism was suggested based on the intermediates. The antibacterial tests confirmed the higher antibacterial activity of ZnCr LDH/GO compared with ZnCr LDH and ZnCr LDH/rGO against Gram-positive Staphylococcus aureus.

Ciprofloxacin removal by ultrasound-enhanced carbon nanotubes/permanganate process: In situ generation of free reactive manganese species via electron transfer

Recently, free reactive manganese species (RMnS) generated via permanganate catalytic oxidation technology has been applied to contaminants abatement and sludge dewatering. This study proposed a novel free RMnS generation method in ultrasound enhanced carbon nanotube (CNTs)/permanganate process (UCP) for organics removal. Taking ciprofloxacin as a target contaminant, the removal efficiency in the UCP process (9.78 s^-1) was remarkably higher than that of the permanganate (0.71 s^-1) and CNTs/permanganate (2.57 s^-1) processes. CNTs could enrich manganese compounds and ciprofloxacin, and act as an electronic platform for the electronic transfer from ciprofloxacin to manganese compounds for free RMnS generation, which was revealed by DFT calculation and spectrum analysis. Meanwhile, ultrasound further regulated the generation of RMnS as it could transform the inactive solid Mn(IV) into free RMnS. In the UCP process, non-free radical modes including RMnS oxidation (49.8%) and electron transfer (23.5%) were the dominant processes for ciprofloxacin removal in the UCP process, and hydroxyl radical oxidation (13.2%), CNTs adsorption (5.5%), and PM oxidation (8.0%) also contributed to ciprofloxacin removal. Interestingly, CNTs could be well reused in the UCP process as more than 88.75% of ciprofloxacin was removed after five times reuse of CNTs. The UCP process provides a novel strategy for rapid contaminants removal in water treatment via continuous generation of free RMnS.

Layered double hydroxides and related hybrid materials for removal of pharmaceutical pollutants from water

Pharmaceuticals and their by-products are recalcitrant contaminants in water. Moreover, the high consumption of these drugs has many detrimental effects on body waters and ecosystems. In this timely review, the advances in molecular engineering of layered double hydroxides (LDH) that have been used for the removal of pharmaceutical pollutants are discussed. The approach starts from the strategies to obtain homogeneous synthesis of LDH that allow the doping and/or surface functionalization of different metals and oxides, producing heterojunction systems as well as composites with carbon and silica-based materials with high surface area. Adsorption is considered as a traditional removal of pharmaceutical pollutants, so the kinetic and mechanism of this phenomenon are analyzed based on pH, temperature, ionic strength, in order to obtain new insights for the formation of multifunctional LDH. Advanced oxidation methodologies, mainly heterogeneous photocatalysis and Fenton-like processes, stand out as the more efficient even to obtain the mineralization of the drugs. The LDH have the advantage of structural memory that favors regeneration processes. The reconstruction of calcined LDH can be used to improve drug removal, through a combination of adsorption capacity/catalytic activity. A meticulous analysis of the persistence, toxicity and bioaccumulation of the most common pharmaceuticals has allowed us to highlight the ability of the LDH to remove recalcitrant drugs at relatively low concentrations (ppm, ppb), in contrast to other mixed oxide nanostructures and homogeneous oxidation processes. In this sense, the mechanism of drug removal by LDH is discussed based on the importance of the use of composites, scavenger agents, Fenton and electro-Fenton processes, membranes, thin films and coatings, among others. In addition, the ecotoxicity of LDH is also reviewed to indicate that these layered structures can exhibit biocompatibility or high toxicity depending on the adsorbed drug and ions/metals that compose them. Undoubtedly, the LDH have a unique flexible structure with adsorption capacity and catalytic activity, facts that explain the important reasons for their extensive use in the environmental remediation of pharmaceutical pollutants from water.

Ultrasonication construction of the nano-petal NiCoFe-layered double hydroxide: An excellent water oxidation electrocatalyst

Unlike other preparation methods of NiCoFe-layered double hydroxides, the present study provides a facile ultrasound method for synthesis of the nano-petal NiCoFe-layered double hydroxide (LDH) prepared under intensification frequency of 40 kHz and ultrasonic power of 305 W. The effect of time reaction on the morphology of NiCoFe-LDH was investigated using the Field Emission-Scanning Electron Microscopy images. The results show that time reaction can affect the morphology and it also showed that the optimal time for synthesis of nano-petal NiCoFe-LDH was 60 min. Then, the effect of nano-petal NiCoFe-LDH on oxygen evaluation reaction activity was studied and compared with NiCoFe-LDH-c nano paricles. Also, in order to study the effect of Co²⁺ of nano-petal NiCoFe-LDH at water oxidation, the activity of NiFe-LDH synthesized in the same conditions was investigated. The results show that nano-petal NiCoFe-LDH has low onset potential (0.46 V vs. SCE), overpotential (~227 mV) and Tafel slope (234 mV per decade) in comparison with other NiCoFe-LDH nanoparticles (synthesis using co-precipitation method and ultrasonication method within 30 and 120 min), and NiFe-LDH. Based on the obtained results, the nano-petal NiCoFe-LDH can be as a suitable electrocatalyst with good stability for water oxidation reaction in the present 0.1 M KOH media.

Heterogeneous activation of persulfate for the degradation of bisphenol A with Ni2SnO4–RGO

The possible reaction mechanism of the activation of persulfate by Ni₂SnO₄–RGO for the degradation of BPA.

Novel cadmium oxide-graphene nanocomposite grown on mesoporous silica for simultaneous photocatalytic H2-evolution

Novel Cadmium Oxide-Graphene Nanocomposite Grown on Mesoporous Silica have been successfully prepared using a self-assembly method under the catering of cetyltrimethylammonium bromide (CTAB) as the surfactant template at ambient conditions. The structural and optical properties of the obtained nanocomposites were investigated by many different techniques. The results of photocatalytic measurements revealed that almost 100% of MB organic dye was removed with the presence of SiO₂/CdO-graphene composite under visible light irradiation. Moreover, the initial pH also plays an important role in the photodegradation processes. On the other hand, this work opens a way to enhance the photocatalytic activity of gallic acid at ambient conditions without any further different oxidation processes. From the evolutionary aspect, SiO₂/CdO-graphene composite revealed better H₂ generation than that of binary photocatalyst (CdO-graphene nanocomposite). The results of characterization and photodegradation suggest that SiO₂/CdO-graphene material constitutes a new photocatalyst for the degradation of organic contaminants, as well as the development of an efficient hetero-system for hydrogen production.